Biomedical subjects

G Andrew Woolley

Publications and source records attributed to G Andrew Woolley.

9 recordsLinked to original sources

PubMed2003

Prevention of peptide fibril formation in an aqueous environment by mutation of a single residue to Aib.

The behavior of a number of 16 residue polypeptides with a sequence Acetyl-EACARXZAACEAAARQ-amide, where X = V or A and Z = A or Aib, is studied under aqueous conditions. It is shown that the substitution of a single alanine residue by alpha-aminoisobutyric acid (Aib) completely alters both the conformation and the aggregation properties of the peptides. The Ala-Ala (X,Z = A,A) peptide is shown by circular dichroism and FTIR methods to adopt a predominately beta-sheet conformation. Furthermore, the peptide has limited solubility and is shown to form fibrils by electron microscopy and thioflavin T binding assays. In contrast, a single substitution at the center of peptide of alanine to Aib (X,Z = A,Aib) completely abolishes fibril formation and alters the conformation to a mixture of random coil and alpha-helix. The results show that Aib is a strong beta-sheet disrupter that is also able to adopt a helical conformation. This is linked to its role in peptaibol antibiotics. Aib provides an attractive alternative to proline and other substitutions in producing peptide variants with a lower tendency to produce fibril aggregates.

Aminoisobutyric Acids↗

PubMed2003

Understanding pH-dependent selectivity of alamethicin K18 channels by computer simulation.

Alamethicin K18 is a covalently linked alamethicin dimer in which the glutamine residue at position 18 in each helix has been replaced by a lysine residue. As described in previous work, channels formed by this peptide show pH-dependent selectivity. The maximum anion selectivity of the putative octameric conducting state is obtained at pH 7 or lower. Inasmuch as no change in selectivity is seen between pH 7 and pH 3, and because protons are expected to be in equilibrium with the open state of the channel during a selectivity measurement, the channel is believed to be fully charged (i.e., all eight lysines protonated) at pH 7. In an effort to understand how such a highly charged channel structure is stable in membranes and why it is not more selective for anions, we have performed a number of computer simulations of the system. Molecular dynamics simulations of 10 ns each of the octameric bundle in a lipid bilayer environment are presented, with either zero, four, or eight lysines charged in the absence of salt, and with eight lysines charged in the presence of 0.5 M and 1 M KCl. When no salt is present and all lysines are charged, on average 1.9 Cl(-) ions are inside the channel and the channel significantly deforms. With 0.5 M KCl present, 2.9 Cl(-) ions are inside the channel. With 1 M KCl present, four Cl(-) ions are present and the channel maintains a regular structure. Poisson-Boltzmann calculations on models of the octameric channel also predict an average of 2-4 Cl(-) ions near the lysine residues as a function of ionic strength. These counterions lower the apparent charge of the channel, which may underlie the decrease in selectivity observed experimentally with increasing salt concentrations. We suggest that to increase the selectivity of Alm K18 channels, positive charges could be engineered in a narrower part of the channel.

Alamethicin↗

PubMed2003

Achieving photo-control of protein conformation and activity: producing a photo-controlled leucine zipper.

We have recently developed a technique that has great potential in producing proteins with photo-control of conformation and consequently activity (J. R. Kumita, O. S. Smart and G. A. Woolley, Proc. Natl. Acad. Sci. U. S. A., 2000, 97, 3803-3808). The method is based on incorporating two cysteine residues into the sequence of a polypeptide. An azobenzene derivative is subsequently used to produce an intramolecular cross-link between the cysteine sulfhydryl groups. In previous work photo-isomerisation of the azobenzene moiety has been used to control the helicity of a monomeric peptide. In the experiments described here this method has been applied to the coiled coil leucine zipper peptide GCN4-p1. The aim was to produce a variant of GCN4-p1 whose helicity and consequently dimerisation is under direct photo-control. We have produced a modified GCN4-p1 incorporating two cysteine residues. The mutations introduced are shown to interfere with the ability of the uncross-linked peptide to form a coiled coil. After the peptide was cross-linked with the azobenzene derivative more normal coiled-coil behaviour was restored. Irradiation of the peptide producing a conformational change in the azobenzene cross-linker was accompanied by an increase in the helicity of the peptide. The work presented here highlights the potential of the use of photo-isomerisable cross-linkers to control protein activity through induced conformational change. In addition, the methodology has the potential to provide a fast trigger for the initiation of protein conformational changes.

Azo Compounds↗

PubMed2002

Site-specific biosynthetic incorporation of a fluorescent tag into proteins via cysteine-tRNA(Cys).

Site-specific incorporation of biophysical probes into proteins during translation can permit structure/function studies on selected proteins in heterogeneous environments. We report here a procedure for incorporating a fluorescent tag into proteins via Escherichia coli Cys-tRNA(Cys) during in vitro protein synthesis. Naturally occurring Cys-tRNA(Cys) is an attractive vehicle for fluorophore incorporation since it can be readily prepared in quantity and reacted with commercially available fluorophores. Moreover, proteins can often be constructed with a single Cys so that fluorophore incorporation results in a tag at a unique site.

Base Sequence↗

PubMed2002

Gramicidin derivatives as membrane-based pH sensors.

Ion channels provide a means for sensitive pH measurement at membrane interfaces. Detailed knowledge of the structure and function of gramicidin channels permits the engineering of pH-sensitive derivatives. Two derivatives, gramicidin-ethylenediamine and gramicidin-histamine, are shown to exhibit pH-dependent single-channel behaviour over the pH ranges 9-11 and 6.5-8.5, respectively. Thermal isomerization of a carbamate group at the entrance of the channels leads to a pattern of steps in single-channel recordings. The size of the steps depends on the time-averaged degree of protonation of the appended group (ethylenediamine or histamine). Measurement of the size of the steps thus permits single-molecule pH sensing under symmetrical pH conditions or in the presence of a pH gradient.

Biosensing Techniques↗

PubMed2002

Polyanions decelerate the kinetics of positively charged gramicidin channels as shown by sensitized photoinactivation.

The effects of different anionic polymers on the kinetic properties of ionic channels formed by neutral gramicidin A (gA) and its positively charged analogs gramicidin-tris(2-aminoethyl)amine (gram-TAEA) and gramicidin-ethylenediamine (gram-EDA) in a bilayer lipid membrane were studied using a method of sensitized photoinactivation. The addition of Konig's polyanion caused substantial deceleration of the photoinactivation kinetics of gram-TAEA channels, which expose three positive charges to the aqueous phase at both sides of the membrane. In contrast, channels formed of gram-EDA, which exposes one positive charge, and neutral gA channels were insensitive to Konig's polyanion. The effect strongly depended on the nature of the polyanion added, namely: DNA, RNA, polyacrylic acid, and polyglutamic acid were inactive, whereas modified polyacrylic acid induced deceleration of the channel kinetics at high concentrations. In addition, DNA was able to prevent the action of Konig's polyanion. In single-channel experiments, the addition of Konig's polyanion resulted in the appearance of long-lived gram-TAEA channels. The deceleration of the gram-TAEA channel kinetics was ascribed to electrostatic interaction of the polyanion with gram-TAEA that reduces the mobility of gram-TAEA monomers and dimers in the membrane via clustering of channels.

Acrylic Resins↗

PubMed2002

Using an azobenzene cross-linker to either increase or decrease peptide helix content upon trans-to-cis photoisomerization.

Reversible photocontrol of peptide and protein conformation could prove to be a powerful tool for probing function in diverse biological systems. Here, we report reversible photoswitching of the helix content in short peptides containing an azobenzene cross-linker between cysteine residues at positions i, i + 4, or i, i + 11 in the sequence. Trans-to-cis photoisomerization significantly increases the helix content in the i, i + 4 case and significantly decreases the helix content in the i, i + 11 case. These cross-linker designs significantly expand the possibilities for photocontrol of peptide and protein structure.

Azo Compounds↗

PubMed2002

Photo-control of peptide helix content by an azobenzene cross-linker: steric interactions with underlying residues are not critical.

Photo-control of protein conformation could prove useful for probing function in diverse biological systems. Recently, we reported photo-switching of helix content in a short peptide containing an azobenzene cross-linker between cysteine residues at positions i and i + 7 in the sequence. In the original sequence, underlying residues at positions i + 3 and i + 4 were made bulky as preliminary modelling suggested that this would enhance photo-control of helix content. To test this hypothesis, peptides with Val, Aib; Ile, Aib; and Ala, Ala at positions i + 3 and i + 4 were synthesized, cross-linked and characterized. Before cross-linking, the peptides show distinct conformational behaviours: two with differing helix/coil mixtures whereas the other has a circular dichroism (CD) spectrum characteristic of beta-sheet and a tendency to aggregate. However, upon cross-linking the peptides have very similar CD spectra: predominantly random coil in the dark but predominantly helical upon irradiation. These results refute the original hypothesis. Steric interactions between the linker and underlying residues do not appear to be critical for photo-switching behaviour. When the cross-linking bridge is lengthened by replacing the i, i + 7 cysteine residues with homocysteine, a lower degree of photo-control of helicity is observed. Furthermore, a non-cross-linking version of the azobenzene reagent is shown not to produce any photo-control of helicity. We conclude that the intramolecular cross-link is essential for photo-switching and that it should be applicable to a wide range of peptides and proteins.

Amino Acid Sequence↗

PubMedDate not supplied

A water-soluble azobenzene cross-linker for photocontrol of peptide conformation.

We have designed and synthesized a water-soluble, sulfonated version of an azobenzene-based thiol-reactive cross-linker that can be introduced into peptides and proteins and act as a conformational photoswitch. The sulfonated compound is shown to effect a similar degree of conformational control on a model peptide helix system, as its nonsulfonated counterpart but can be introduced without the need for any organic cosolvent. The sulfonated azobenzene cross-linker thus expands the range of proteins to which photocontrol can be applied.

Amino Acid Sequence↗