Search PubMed⌕ Search

Biomedical subjects

G A McFeters

Publications and source records attributed to G A McFeters.

At least 19 recordsLinked to original sources

Gene expression and protein levels of the stationary phase sigma factor, RpoS, in continuously-fed Pseudomonas aeruginosa biofilms.

Bacteria growing in biofilms experience gradients of environmental conditions, including varying levels of nutrients and oxygen. Therefore, bacteria within biofilms may enter distinct physiological states, depending on the surrounding conditions. In this study, rpoS expression and RpoS levels were measured as indicators of stationary phase growth within thick continuously-fed Pseudomonas aeruginosa biofilms. The level of rpoS expression in a 3-day-old biofilm was found to be three-fold higher than the average expression in stationary phase planktonic culture. RpoS levels in biofilms, indicated by immunoblot analysis, were similar to levels in stationary phase planktonic cultures. In planktonic cultures, oxygen limitation did not lead to increased levels of RpoS, suggesting that oxygen limitation was not the environmental signal causing increased expression of rpoS. These results suggest that bacteria within P. aeruginosa biofilms may exhibit stationary phase characteristics even when cultured in flow conditions that continually replenish nutrients.

Anaerobiosis↗

A repeatable laboratory method for testing the efficacy of biocides against toilet bowl biofilms.

AIMS: The purpose of this study was to develop a laboratory biofilm growth reactor system that simulated the toilet bowl environment and which could be used for biocide efficacy testing. METHODS AND RESULTS: A microbial biofilm reactor system incorporating intermittent flow and nutrient provision was designed. The reactor system was open to the air and was inoculated with organisms collected from toilet bowl biofilms. Once per hour, reactors were supplied with a nutrient solution for a period of 5 min, then flushed and refilled with tap water or tap water amended with chlorine. Quantitative measures of the rate and extent of biofilm accumulation were defined. Biofilm accumulated in untreated reactors to cell densities of 108 cfu cm-2 after approximately 1 week. Biofilm accumulation was also observed in reactors in the continuous presence of several milligrams per litre of free chlorine. Repeatability standard deviations for the selected efficacy measures were low, indicating high repeatability between experiments. Log reduction values of viable cell numbers were within ranges observed with standard suspension and hard surface disinfection tests. Biofilm accumulated in laboratory reactors approximately seven times faster than it did in actual toilet bowls. The same ranking was achieved in tests between laboratory biofilms and field-grown biofilms with three of the four measures, using three different concentrations of chlorine. CONCLUSION: This reactor system has been shown to simulate, in a repeatable way, the accumulation of bacterial biofilm that occurs in toilet bowls. The results demonstrate that this system can provide repeatable assays of the efficacy of chlorine against those biofilms. SIGNIFICANCE AND IMPACT OF THE STUDY: The laboratory biofilm reactor system described herein can be used to evaluate potential antimicrobial and antifouling treatments for control of biofilm formation in toilet bowls.

Anti-Bacterial Agents↗

Reduced susceptibility of thin Pseudomonas aeruginosa biofilms to hydrogen peroxide and monochloramine.

Pseudomonas aeruginosa attached to alginate gel beads in sparse, thin biofilms exhibited reduced susceptibility to monochloramine and hydrogen peroxide compared with planktonic cells of the same micro-organism. Disinfection rate coefficients for planktonic bacteria averaged 0.551 mg(-1)min(-1) for monochloramine and 3.1 x 10(-4)l mg(-1) min(-1) for hydrogen peroxide. The corresponding values for 24-h-old biofilm cells were 0.291 mg min(-1) and 9.2 x 10(-5) 1 mg(-1) min(-1) for monochloramine and hydrogen peroxide, respectively. Several pieces of evidence support the interpretation that the reduced susceptibility of biofilm was not due simply to inadequate delivery of the antimicrobial agent to the local environment of the attached cells. No correlation between biofilm susceptibility and biofilm initial areal cell density was observed. Rapid delivery of hydrogen peroxide to the attachment surface, and subsequently to the interior, of the alginate gel beads was visualized by a direct experimental technique. Theoretical analysis of unsteady diffusion and diffusion reaction interactions also argued against any significant delay or barrier to antimicrobial or oxygen delivery. It was hypothesized that new genes are expressed when bacteria attach to a surface and begin to form a biofilm and that some of the resulting gene products reduce the susceptibility of the cell to antimicrobial agents including oxidative biocides such as monochloramine and hydrogen peroxide.

Alginates↗

Role of RpoS and AlgT in Pseudomonas aeruginosa biofilm resistance to hydrogen peroxide and monochloramine.

The role of two sigma factors, AlgT and RpoS, in mediating Pseudomonas aeruginosa biofilm resistance to hydrogen peroxide and monochloramine was investigated. Two knock out mutant strains, SS24 (rpoS-) and PAO6852 (algT-), were compared with a wild type, PAO1, in their susceptibility to monochloramine and hydrogen peroxide. When grown as biofilms on alginate gel beads (mean untreated areal cell density 3.7 +/- 0.27 log cfu cm-2) or on glass slides (mean untreated areal cell density 7.6 +/- 0.9 log cfu cm-2), wild type bacteria exhibited reduced susceptibility to both antimicrobial agents in comparison with suspended cells. On alginate gel beads, all strains were equally resistant to monochloramine. rpoS- and algT- gel bead biofilms of 24-hour-old were more susceptible to hydrogen peroxide disinfection than were biofilms formed by PAO1. Biofilm disinfection rate coefficients for the two mutant strains were statistically indistinguishable from planktonic disinfection rate coefficients, indicating complete loss of biofilm resistance. While 48-hour-old algT- biofilm cells became resistant to hydrogen peroxide, 48-hour-old rpoS- biofilm cells remained highly susceptible. With the thicker biofilms formed on glass coupons, all strains were equally resistant to both hydrogen peroxide and monochloramine. It is concluded that while RpoS and AlgT may play a transient role in protecting thin biofilms from hydrogen peroxide, these sigma factors do not mediate resistance to monochloramine and do not contribute significantly to the hydrogen peroxide resistance of thick biofilms.

Alginates↗

The use of multiple indices of physiological activity to access viability in chlorine disinfected Escherichia coli O157:H7.

A suite of fluorescent intracellular stains and probes was used, in conjunction with viable plate counts, to assess the effect of chlorine disinfection on membrane potential (rhodamine 123; Rh123 and bis-(1,3-dibutylbarbituric acid) trimethine oxonol; DiBAC4(3)), membrane integrity (LIVE/DEAD BacLight kit), respiratory activity (5-cyano-2,3-ditolyl tetrazolium chloride; CTC) and substrate responsiveness (direct viable counts; DVC) in the commensal pathogen Escherichia coli O157:H7. After a 5 min exposure to the disinfectant, physiological indices were affected in the following order: viable plate counts > substrate responsiveness > membrane potential > respiratory activity > membrane integrity. In situ assessment of physiological activity by examining multiple targets, as demonstrated in this study, permits a more comprehensive determination of the site and extent of injury in bacterial cells following sublethal disinfection with chlorine. This approach to assessing altered bacterial physiology has application in various fields where detection of stressed bacteria is of interest.

Chlorine↗

Sensitive detection of Escherichia coli O157:H7 in food and water by immunomagnetic separation and solid-phase laser cytometry.

Rapid, direct methods are needed to assess active bacterial populations in water and foods. Our objective was to determine the efficiency of bacterial detection by immunomagnetic separation (IMS) and the compatibility of IMS with cyanoditolyl tetrazolium chloride (CTC) incubation to determine respiratory activity, using the pathogen Escherichia coli O157:H7. Counterstaining with a specific fluorescein-conjugated anti-O157 antibody (FAb) following CTC incubation was used to allow confirmation and visualization of bacteria by epifluorescence microscopy. Broth-grown E. coli O157:H7 was used to inoculate fresh ground beef (<17% fat), sterile 0.1% peptone, or water. Inoculated meat was diluted and homogenized in a stomacher and then incubated with paramagnetic beads coated with anti-O157 specific antibody. After IMS, cells with magnetic beads attached were stained with CTC and then an anti-O157 antibody-fluorescein isothiocyanate conjugate and filtered for microscopic enumeration or solid-phase laser cytometry. Enumeration by laser scanning permitted detection of ca. 10 CFU/g of ground beef or <10 CFU/ml of liquid sample. With inoculated meat, the regression results for log-transformed respiring FAb-positive counts of cells recovered on beads versus sorbitol-negative plate counts in the inoculum were as follows: intercept = 1.06, slope = 0.89, and r2 = 0. 95 (n = 13). The corresponding results for inoculated peptone were as follows: intercept = 0.67, slope = 0.88, and r2 = 0.98 (n = 24). Recovery of target bacteria on beads by the IMS-CTC-FAb method, compared with recovery by sorbitol MacConkey agar plating, yielded greater numbers (beef, 6.0 times; peptone, 3.0 times; water, 2.4 times). Thus, within 5 to 7 h, the IMS-CTC-FAb method detected greater numbers of E. coli O157 cells than were detected by plating. The results show that the IMS-CTC-FAb technique with enumeration by either fluorescence microscopy or solid-phase laser scanning cytometry gave results that compared favorably with plating following IMS.

Animals↗

Rapid direct methods for enumeration of specific, active bacteria in water and biofilms.

Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between results obtained with the ChemScan and traditional plate counts of mixed natural bacterial populations in water. The continuing evolution of these methods will be valuable in the rapid and accurate analysis of environmental samples.

Bacteria↗

Color measurement as a means of quantifying surface biofouling.

Laboratory reactors fitted with removable ceramic porcelain growth surfaces were inoculated with a consortium of biofilm forming environmental isolates. A Minolta colorimeter CR-200 (Minolta Camera Co., Ltd, Ramsey, NJ) was used in conjunction with a specially designed adapter to evaluate the reflective color of the porcelain disks as biofilm accumulated on them. Areal viable cell counts were monitored over a period of eleven days in two separate experiments and direct color measurements of the untreated, microbially fouled test surfaces were collected. This colorimetric assay was both non-destructive and immediate. A strong linear relationship between log cell density and log color change was observed. The Pearson product moment correlation coefficient for all 45 observations combined was r = 0.95. Separate regression lines for each experiment were not significantly different (P = 0.19). When adjusted for time, the (partial) correlation coefficient between log cell density and log color change was r = 0.87, which suggests that the relationship between the two measures can not be explained by their mutual dependence on time. Reflective color measurement provided a rapid, non-destructive and quantitative measure of biofllm accumulation.

Biofilms↗

Spatial physiological heterogeneity in Pseudomonas aeruginosa biofilm is determined by oxygen availability.

The role of oxygen availability in determining the local physiological activity of Pseudomonas aeruginosa growing in biofilms was investigated. Biofilms grown in an ambient-air environment expressed approximately 1/15th the alkaline phosphatase specific activity of planktonic bacteria subjected to the same phosphate limitation treatment. Biofilms grown in a gaseous environment of pure oxygen exhibited 1.9 times the amount of alkaline phosphatase specific activity of air-grown biofilms, whereas biofilms grown in an environment in which the air was replaced with pure nitrogen prior to the inducing treatment did not develop alkaline phosphatase activity. Frozen cross sections of biofilms stained for alkaline phosphatase activity with a fluorogenic stain demonstrated that alkaline phosphatase activity was concentrated in distinct bands adjacent to the gaseous interfaces. These bands were approximately 30 micron thick with biofilms grown in air, 2 micron thick with biofilms grown in pure nitrogen, and 46 micron thick with biofilms grown in pure oxygen. Overall biofilm thickness ranged from approximately 117 to approximately 151 micron. Measurements with an oxygen microelectrode indicated that oxygen was depleted locally within the biofilm and that the oxygen-replete zone was of a dimension similar to that of the biologically active zone, as indicated by alkaline phosphatase induction. These experiments revealed marked spatial physiological heterogeneity within P. aeruginosa biofilms in which active protein synthesis was restricted by oxygen availability to the upper 30 micron of the biofilm. Such physiological heterogeneity has implications for microbial ecology and for understanding the reduced susceptibilities of biofilms to antimicrobial agents.

Adenosine Triphosphatases↗

Effects of starvation on physiological activity and chlorine disinfection resistance in Escherichia coli O157:H7.

Escherichia coli O157:H7 can persist for days to weeks in microcosms simulating natural conditions. In this study, we used a suite of fluorescent, in situ stains and probes to assess the influence of starvation on physiological activity based on membrane potential (rhodamine 123 assay), membrane integrity (LIVE/DEAD BacLight kit), respiratory activity (5-cyano-2,3-di-4-tolyl-tetrazolium chloride assay), intracellular esterase activity (ScanRDI assay), and 16S rRNA content. Growth-dependent assays were also used to assess substrate responsiveness (direct viable count [DVC] assay), ATP activity (MicroStar assay), and culturability (R2A agar assay). In addition, resistance to chlorine disinfection was assessed. After 14 days of starvation, the DVC values decreased, while the values in all other assays remained relatively constant and equivalent to each other. Chlorine resistance progressively increased through the starvation period. After 29 days of starvation, there was no significant difference in chlorine resistance between control cultures that had not been exposed to the disinfectant and cultures that had been exposed. This study demonstrates that E. coli O157:H7 adapts to starvation conditions by developing a chlorine resistance phenotype.

Bacteriological Techniques↗

Spatial patterns of alkaline phosphatase expression within bacterial colonies and biofilms in response to phosphate starvation.

The expression of alkaline phosphatase in response to phosphate starvation was shown to be spatially and temporally heterogeneous in bacterial biofilms and colonies. A commercial alkaline phosphatase substrate that generates a fluorescent, insoluble product was used in conjunction with frozen sectioning techniques to visualize spatial patterns of enzyme expression in both Klebsiella pneumoniae and Pseudomonas aeruginosa biofilms. Some of the expression patterns observed revealed alkaline phosphatase activity at the boundary of the biofilm opposite the place where the staining substrate was delivered, indicating that the enzyme substrate penetrated the biofilm fully. Alkaline phosphatase accumulated linearly with time in K. pneumoniae colonies transferred from high-phosphate medium to low-phosphate medium up to specific activities of 50 mumol per min per mg of protein after 24 h. In K. pneumoniae biofilms and colonies, alkaline phosphatase was initially expressed in the region of the biofilm immediately adjacent to the carbon and energy source (glucose). In time, the region of alkaline phosphatase expression expanded inward until it spanned most, but not all, of the biofilm or colony depth. In contrast, expression of alkaline phosphatase in P. aeruginosa biofilms occurred in a thin, sharply delineated band at the biofilm-bulk fluid interface. In this case, the band of activity never occupied more than approximately one-sixth of the biofilm. These results are consistent with the working hypothesis that alkaline phosphatase expression patterns are primarily controlled by the local availability of either the carbon and energy source or the electron acceptor.

Alkaline Phosphatase↗

Distribution of Clostridium perfringens and fecal sterols in a benthic coastal marine environment influenced by the sewage outfall from McMurdo Station, Antarctica.

The spatial distribution, movement, and impact of the untreated wastewater outfall from McMurdo Station, Antarctica, were investigated under early austral summer conditions. The benthic environment was examined to determine the distribution of Clostridium perfringens in sediment cores and the intestinal contents of native invertebrates and fish along a transect of stations. These stations extended ca. 411 m south of the outfall. The findings revealed that the concentration of C. perfringens decreased with depth in the sediment and distance from the outfall. High percentages of tunicates and sea urchins were colonized with this bacterium along the transect. Coprostanol concentrations were also measured in sediment samples taken from each of the transect stations, and a similar trend was observed. These results are in agreement with the findings of previous studies performed with the water column and collectively provide evidence that the disposal of domestic wastes deserves special consideration in polar marine environments.

Antarctic Regions↗

Physiological stress in batch cultures of Pseudomonas putida 54G during toluene degradation.

Physiological stress associated with toluene exposure in batch cultures of Pseudomonas putida 54G was investigated. P. putida 54G cells were grown using a continuous vapor phase feed stream containing 150 ppmv or 750 ppmv toluene as the sole carbon and energy source. Cells were enumerated on non-selective (R2A agar plates) and a selective minimal medium incubated in the presence of vapor phase toluene (HCMM2). Differential recovery on the two media was used to evaluate bacterial stress, culturability and loss of toluene-degrading capability. A majority of the bacteria were reversibly stressed and could resume active colony formation on selective medium after passage on non-selective medium. A small fraction of the bacterial cells suffered an irreversible loss of toluene degradation capability and were designated as Tol- variants. Numbers of stressed organisms increased with duration of toluene exposure and toluene concentration and coincided with accumulation of metabolic intermediates from incomplete toluene degradation. Respiring cell numbers in the batch cultures decreased as injury increased, indicating a possible relationship between respiring and injured cells. Rate expressions for injury, for formation of Tol- variants and for growth of Tol- variants were determined by calibrating a theoretical model to the results obtained. These rate expressions can be used to calibrate bioreactor models, and provide a basis for better design and control of bioremediation systems.

Biodegradation, Environmental↗

Comparative performance of Colisure.

Colisure presence-absence medium was compared with standard reference methods for detecting low numbers of total coliform bacteria and E. coli in drinking water when the bacteria were subjected to chlorine stress. When Colisure was compared with established reference methods to detect total coliforms in dilute, disinfected samples, Colisure yielded more positive results after 24, 28, and 48 h than lauryl tryptose broth (LTB) confirmed in bile green lactose broth after 48 h. Colisure also detected higher levels of chlorine-injured E. coli than LTB confirmed in EC medium with 4-methylumbelliferyl B-D-glucuronide (EC/MUG). The sensitivity and specificity of Colisure were also evaluated and were determined to be between 96 and 100 percent on nonchlorinated samples when positive and negative tests were verified.

Bacteriological Techniques↗

Effects of substrates and phosphate on INT (2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl tetrazolium chloride) and CTC (5-cyano-2,3-ditolyl tetrazolium chloride) reduction in Escherichia coli.

The effects of substrates of primary aerobic dehydrogenases, and inorganic phosphate on aerobic INT and CTC reduction in Escherichia coli were examined. In general, INT produced less formazan than CTC, but INT (+) cell counts remained near values of CTC (+) cells. INT and CTC (+) cell numbers were higher than plate counts on R2A medium using succinate, formate, lactate, casamino acids, glucose, glycerol (INT only) and no substrate. Formate resulted in the greatest amount of INT and CTC formazan. Reduction of both INT and CTC was inhibited above 10 mmol l-1 phosphate, and this appeared to be related to decreased rates of O2 consumption. Formation of fluorescent CTC (+), but not INT (+) cells was also inhibited in a concentration dependent manner by phosphate above 10 mmol l-1. From light microscopic observations it appeared CTC formed increasing amounts of poorly or non-fluorescent formazan with increasing phosphate. Therefore, use of phosphate buffer in excess of 10 mmol l-1 may not be appropriate in CTC and INT reduction assays.

Colony Count, Microbial↗

Nonuniform spatial patterns of respiratory activity within biofilms during disinfection.

Fluorescent stains in conjunction with cryoembedding and image analysis were applied to demonstrate spatial gradients in respiratory activity within bacterial biofilms during disinfection with monochloramine. Biofilms of Klebsiella pneumoniae and Pseudomonas aeruginosa grown together on stainless steel surfaces in continuous-flow annular reactors were treated with 2 mg of monochloramine per liter (influent concentration) for 2 h. Relatively little biofilm removal occurred as evidenced by total cell direct counts. Plate counts (of both species summed) indicated an average 1.3-log decrease after exposure to 2 mg of monochloramine per liter. The fluorogenic redox indicator 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) and the DNA stain 4',6-diamidino-2-phenylindole (DAPI) were used to differentiate respiring and nonrespiring cells in biofilms. Epifluorescence micrographs of frozen biofilm cross sections clearly revealed gradients of respiratory activity within biofilms in response to monochloramine treatment. These gradients in specific respiratory activity were quantified by calculating the ratio of CTC and DAPI intensities measured by image analysis. Cells near the biofilm-bulk fluid interface lost respiratory activity first. After 2 h of biocide treatment, greater respiratory activity persisted deep in the biofilm than near the biofilm-bulk fluid interface.

Biofilms↗