Biomedical subjects

F Tjerneld

Publications and source records attributed to F Tjerneld.

At least 19 recordsLinked to original sources

PubMed2001

Genetic engineering of the Trichoderma reesei endoglucanase I (Cel7B) for enhanced partitioning in aqueous two-phase systems containing thermoseparating ethylene oxide--propylene oxide copolymers.

Endoglucanases (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4) are industrially important enzymes. In this study endoglucanase I (EGI or Cel7B) of the filamentous fungi Trichoderma reesei has been genetically engineered to investigate the influence of tryptophan rich peptide extensions (tags) on partitioning in an aqueous two-phase model system. EGI is a two-domain enzyme and is composed of a N-terminal catalytic domain and a C-terminal cellulose binding domain, separated by a linker. The aim was to find an optimal tag and fusion position, which further could be utilised for large scale extractions. Peptide tags of different length and composition were attached at various localisations of EGI. The fusion proteins were expressed from T. reesei with the use of the gpdA promoter from Aspergillus nidulans. Variations in secreted levels between the engineered proteins were obtained. The partitioning of EGI in an aqueous two-phase system composed of a thermoseparating ethylene oxide-propylene oxide random copolymer (EO(50)PO(50)) and dextran, could be significantly improved by relatively minor genetic engineering. The (Trp-Pro)(4) tag added after a short stretch of the linker, containing five proline residues, gave in the highest partition coefficient of 12.8. The yield in the top phase was 94%. The specific activity was 83% of the specific activity of unmodified EGI on soluble substrate. The efficiency of a tag fused to a protein is shown by the tag efficiency factor (TEF). A hypothetical TEF of 1.0 would indicate full tag exposure and optimal contribution to the protein partitioning by the fused tag. The location of the fusion point after the sequence of five proline residues in the linker of EGI is the most beneficial in two-phase separation. The highest TEF (0.97) was obtained with the (Trp-Pro)(2) tag at this position, indicating full exposure and intactness of the tag. However, the peptide tag composed of (Trp-Pro)(4) improved the partition properties the most but had lower TEF in comparison to (Trp-Pro)(2).

Base Sequence↗

PubMed2001

Genetically engineered peptide fusions for improved protein partitioning in aqueous two-phase systems. Effect of fusion localization on endoglucanase I of Trichoderma reesei.

Genetic engineering has been used for fusion of the peptide tag, Trp-Pro-Trp-Pro, on a protein to study the effect on partitioning in aqueous two-phase systems. As target protein for the fusions the cellulase, endoglucanase I (endo-1,4-beta-Dglucan-4-glucanohydrolase, EC 3.2.1.4, EGI, Cel7B) of Trichoderma reesei was used. For the first time a glycosylated two-domain enzyme has been utilized for addition of peptide tags to change partitioning in aqueous two-phase systems. The aim was to find an optimal fusion localization for EGI. The peptide was (1) attached to the C-terminus end of the cellulose binding domain (CBD), (2) inserted in the glycosylated linker region, (3) added after a truncated form of EGI lacking the CBD and a small part of the linker. The different constructs were expressed in the filamentous fungus T. reesei under the gpdA promoter from Aspergillus nidulans. The expression levels were between 60 and 100 mg/l. The partitioning behavior of the fusion proteins was studied in an aqueous two-phase model system composed of the thermoseparating ethylene oxide (EO)-propylene oxide (PO) random copolymer EO-PO (50:50) (EO50PO50) and dextran. The Trp-Pro-Trp-Pro tag was found to direct the fusion protein to the top EO50PO50 phase. The partition coefficient of a fusion protein can be predicted with an empirical correlation based on independent contributions from partitioning of unmodified protein and peptide tag in this model system. The fusion position at the end of the CBD, with the spacer Pro-Gly, was shown to be optimal with respect to partitioning and tag efficiency factor (TEF) was 0.87, where a fully exposed tag would have a TEF of 1.0. Hence, this position can further be utilized for fusion with longer tags. For the other constructs the TEF was only 0.43 and 0.10, for the tag fused to the truncated EGI and in the linker region of the full length EGI, respectively.

Amino Acid Sequence↗

PubMed2001

The chaperone-like activity of a small heat shock protein is lost after sulfoxidation of conserved methionines in a surface-exposed amphipathic alpha-helix.

The small heat shock proteins (sHsps) possess a chaperone-like activity which prevents aggregation of other proteins during transient heat or oxidative stress. The sHsps bind, onto their surface, molten globule forms of other proteins, thereby keeping them in a refolding competent state. In Hsp21, a chloroplast-located sHsp in all higher plants, there is a highly conserved region forming an amphipathic alpha-helix with several methionines on the hydrophobic side according to secondary structure prediction. This paper describes how sulfoxidation of the methionines in this amphipathic alpha-helix caused conformational changes and a reduction in the Hsp21 oligomer size, and a complete loss of the chaperone-like activity. Concomitantly, there was a loss of an outer-surface located alpha-helix as determined by limited proteolysis and circular dichroism spectroscopy. The present data indicate that the methionine-rich amphipathic alpha-helix, a motif of unknown physiological significance which evolved during the land plant evolution, is crucial for binding of substrate proteins and has rendered the chaperone-like activity of Hsp21 very dependent on the chloroplast redox state.

Amino Acid Sequence↗

PubMed2001

Parameters influencing protein extraction for whole broths in detergent based aqueous two-phase systems.

The parameters important for an optimisation of cloud point extraction in technical scale were investigated using a genetically engineered fusion protein derived from endoglucanase I expressed in Trichoderma reesei and the nonionic polyoxyethylene Agrimul NRE 1205. The key parameters are temperature, detergent concentration, and additional salts. These parameters are interdependent, thus there is an optimum in the partition coefficient with respect to detergent concentration and a maximum for the partition coefficient and the yield with respect to temperature. These results were confirmed for the detergent C12E5 to demonstrate that these optima are due to the nature of polyoxyethylenes. Cloud point extraction was found to be only slightly affected by pH. In the case studied extraction of whole broth is favourable for a high yield and partition coefficient, since fusion protein adhering to the cells can be solubilized. However some loss of detergent which remains in the fungal biomass was observed.

Biomass↗

PubMed2001

Homologous expression and characterization of Cel61A (EG IV) of Trichoderma reesei.

There are currently four proteins in family 61 of the glycoside hydrolases, from Trichoderma reesei, Agaricus bisporus, Cryptococcus neoformans and Neurospora crassa. The enzymatic activity of these proteins has not been studied thoroughly. We report here the homologous expression and purification of T. reesei Cel61A [previously named endoglucanase (EG) IV]. The enzyme was expressed in high amounts with a histidine tag on the C-terminus and purified by metal affinity chromatography. This is the first time that a histidine tag has been used as a purification aid in the T. reesei expression system. The enzyme activity was studied on a series of carbohydrate polymers. The only activity exhibited by Cel61A was an endoglucanase activity observed on substrates containing beta-1,4 glycosidic bonds, e.g. carboxymethylcellulose (CMC), hydroxyethylcellulose (HEC) and beta-glucan. The endoglucanase activity on CMC and beta-glucan was determined by viscosity analysis, by measuring the production of reducing ends and by following the degradation of the polymer on a size exclusion chromatography system. The formation of soluble sugars by Cel61A from microcrystalline cellulose (Avicel; Merck), phosphoric acid swollen cellulose (PASC), and CMC were analysed on a HPLC system. Cel61A produced small amounts of oligosaccharides from these substrates. Furthermore, Cel61A showed activity against cellotetraose and cellopentaose. The activity of Cel61A was several orders of magnitude lower compared to Cel7B (previously EG I) of T. reesei on all substrates. One significant difference between Cel61A and Cel7B was that cellotriose was a poor substrate for Cel61A but was readily hydrolysed by Cel7B. The enzyme activity for Cel61A was further studied on a large number of carbohydrate substrates but the enzyme showed no activity towards any of these substrates.

Base Sequence↗

PubMed2000

Characterization of acetylated 4-O-methylglucuronoxylan isolated from aspen employing 1H and 13C NMR spectroscopy.

Water-soluble hemicelluloses were extracted from milled aspen wood (Populus tremula) employing microwave oven treatment at 180 degrees C for 10 min. The final pH of this extract was 3.5. From this extract oligo- and polysaccharides were isolated and subsequently fractionated by size-exclusion chromatography. The structures of the saccharides in three of the fractions obtained were determined by 1H and 13C NMR spectroscopy, using homonuclear and heteronuclear two-dimensional techniques. The polysaccharides present in the two fractions eluted first were O-acetyl-(4-O-methylglucurono)xylans. The average degree of acetylation of the xylose residues in these compounds was 0.6. The structural element -->4)[4-O-Me-alpha-D-GlcpA-(1-->2)][3-O-Ac]-beta-D-Xylp-(1 --> could also be identified. On the average, these two xylans were composed of the following (1-->4)-linked beta-D-xylopyranosyl structural elements: unsubstituted (50 mol%), 2-O-acetylated (13 mol%), 3-O-acetylated (21 mol%), 2,3-di-O-acetylated (6 mol%) and [MeGlcA alpha-(1-->2)][3-O-acetylated] (10 mol%). Most of the 4-O-methylglucuronyl and acetyl substituents in the isolated polysaccharides survived the microwave oven treatment. The third fraction, eluted last, contained acetylated xylo-oligosaccharides, with minor contamination by an acetylated mannan. In the case of these xylo-oligosaccharides, the average degree of acetylation was 0.3.

Acetylation↗

PubMed2000

Substitutions of surface amino acid residues of cutinase probed by aqueous two-phase partitioning.

The surface properties of a protein are often crucial for recognition and interaction with other molecules. Important functional residues can be identified by mutational analysis. There is a need for rapid methods to study protein surfaces and surface changes due to mutations. Partitioning in aqueous two-phase systems has the potential to be used in this respect since protein partitioning depends on the surface properties of the protein. The influence of surface-exposed amino acid residues in protein partitioning has been studied with cutinase variants, which differed in one or several amino acid residues as a result of site-directed mutagenesis. The solvent accessibility of the mutated residues was determined with a computer program, Graphical Representation and Analysis of Surface Properties. The aqueous two-phase system was composed of dextran and a random copolymer of ethylene oxide and propylene oxide. It was shown, for the first time, to what extent surface-exposed amino acid residues influence the partition coefficient in an aqueous two-phase system. The effect on partitioning could be described only taking into account solvent accessibility and type of residue substitution. The results demonstrate that the system can be used to detect conformational changes in mutant proteins since the expected effect on partitioning due to a mutation can be calculated. The aqueous two-phase system used here does indeed provide a rapid and convenient method to study protein surfaces and slight surface changes due to mutations.

Amino Acid Substitution↗

PubMed2000

Affinity partitioning of a poly(histidine)-tagged integral membrane protein, cytochrome bo3 ubiquinol oxidase, in a detergent--polymer aqueous two-phase system containing metal-chelating polymer.

A system has been developed for selective partitioning of membrane proteins. For the first time, an integral membrane protein, cytochrome bo3 ubiquinol oxidase from Escherichia coli, has been affinity partitioned in an aqueous two-phase system. The systems used were different detergent/polymer aqueous two-phase systems containing a metal-chelating polymer, such as poly(ethyleneglycol)-iminodiacetic acid-Cu(II) as well as dextran-iminodiacetic acid-Cu(II). Many non-ionic detergents, such as alkyl(polyethyleneoxide) (CmEOn), Triton, Tween and alkylglucosides, form two-phase systems in mixture with polymers, such as dextran and poly(ethyleneglycol), i.e., a micelle-enriched phase in equilibrium with a polymer-enriched phase are formed. In general, membrane proteins partition strongly to the micelle phase. We show that it is possible to selectively partition a poly(histidine)-tagged integral membrane protein into the polymer phase by metal affinity partitioning, with a shift in the partitioning coefficient from 0.015 to 4.8 (300-fold). The affinity partitioning was characterized and the effects of ligand concentration, pH, time, salts, buffer type, imidazole and charged detergent are discussed. Thus, a fast and mild affinity procedure for the purification of integral membrane proteins can be developed in affinity detergent/polymer aqueous two-phase systems, and the method is especially suitable for the purification of labile integral membrane proteins, such as receptors.

Chelating Agents↗

PubMed2000

Model process for separation based on unfolding and refolding of chymotrypsin inhibitor 2 in thermoseparating polymer two-phase systems.

For the design of a new separation process based on unfolding and refolding of protein, the partitioning behaviour of proteins was studied in thermoseparating polymer two-phase systems with varying pH and temperature. Chymotrypsin inhibitor 2 (CI2), which unfolds reversibly in a simple two-state manner, was partitioned in an aqueous two-phase system (ATPS) composed of a random copolymer of ethylene oxide and propylene oxide (Breox) and dextran T-500. Between 25 and 50 degrees C, the partition coefficients of CI2 in Breox-dextran T-500 systems remain constant at neutral pH. However, there is a drastic increase at pH values below 1.7, 2.1, and 2.7 at 25, 40 and 50 degrees C, respectively. The partitioning behavior of CI2 was also investigated in thermoseparating water-Breox systems at 55-60 degrees C, where CI2 was partitioned to the polymer-rich phase at pH values below 2.4. These results on the CI2 partitioning can be explained by the conformational difference between the folded and the unfolded states of the protein, where the unfolded CI2 with a more hydrophobic surface is partitioned to the relatively hydrophobic Breox phase in both systems. A separation process is presented based on the partitioning behavior of unfolded and refolded CI2 by control of pH and temperature in thermoseparating polymer two-phase systems. The target protein can be recovered through (i) selective separation in Breox-dextran systems, (ii) refolding in Breox phase, and (iii) thermoseparation of primary Breox phase.

Chymotrypsin↗

PubMed2000

Partitioning of peptides and recombinant protein-peptide fusions in thermoseparating aqueous two-phase systems: effect of peptide primary structure.

Genetic engineering has been used for fusion of peptides, with different length and composition, on a protein to study the effect on partitioning in an aqueous two-phase system. The system was composed of dextran and the thermoseparating ethylene oxide-propylene oxide random copolymer, EO30P070. Peptides containing tryptophan, proline, arginine or aspartate residues were fused at the C-terminus of the recombinant protein ZZ-cutinase. The aim was to find effective tags for the lipolytic enzyme cutinase for large-scale extraction. The target protein and peptide tags were partitioned separately and then together in the fusion proteins in order to gain increased understanding of the influence of certain amino acid residues on the partitioning. The salt K2SO4 was used to reduce the charge dependent salt effects on partitioning and to evaluate the contribution to the partition coefficient from the hydrophobic-hydrophilic properties of the amino acid residues. The effect of Trp on peptide partitioning was independent of the difference in primary structure for (Trp)n, (Trp-Pro)n, (Ala-Trp-Trp-Pro)n and was only determined by the number of Trp. The effect of the charged residues, Arg and Asp, was dependent on the surrounding residues, i.e. if they were situated next to Trp or not. The partitioning behaviour observed for the peptides was qualitatively and in some cases also quantitatively the same as for the fusion proteins. The effect of the salts sodium perchlorate and triethylammonium phosphate on the partitioning was also studied. The salt effects observed for the peptides were qualitatively similar to the effects observed for the fusion proteins.

Amino Acid Sequence↗

PubMed2000

Polymer recycling in aqueous two-phase extractions using thermoseparating ethylene oxide--propylene oxide copolymers.

This is a study on the recovery and recycling of copolymer in aqueous two-phase systems containing random copolymers of ethylene oxide (EO) and propylene oxide (PO). The random copolymers separate from water solution when heated above the lower critical solution temperature (LCST). The primary phase systems were composed of EOPO copolymer and hydroxypropyl or hydroxyethyl starch. After phase separation the upper EOPO phase was removed and subjected to temperature induced phase separation. Copolymers with different EO/PO compositions have been investigated, EO50P050 [50% EO and 50% PO (w/w)], EO30PO70 and EO20P080. The temperature required for thermoseparation decreases when the PO content of the copolymer is increased. The effect on the recovery of copolymer after addition of salts, a second polymer or protein was investigated. The added components increased the recovery of copolymer after thermoseparation, e.g., increased the amount copolymer separated from the water phase after thermoseparation. Recycling of copolymer and measurements of polymer concentrations in the primary top and bottom phases after repeated recycling steps was performed. The fluctuation in polymer concentration of the phases was very small after recycling up to four times. Partitioning of the proteins BSA and lysozyme was studied in primary phase systems after recycling of copolymer. The partition coefficients of total protein and lysozyme was not significantly changed during recycling of copolymer. More than 90% of the copolymer could be recovered in the thermoseparation step by optimising the temperature and time for thermoseparation. In repeated phase partitionings in EOPO-starch systems the EO50PO50 copolymer could be recovered to 77% including losses in primary system and thermoseparation, which is equivalent to a total copolymer reuse of 4.3 times.

Polyethylenes↗

PubMed2000

Phase behavior and protein partitioning in aqueous two-phase systems of cationic--anionic surfactant mixtures.

Cationic-anionic surfactant mixtures can form aqueous two-phase systems. Such aqueous surfactant two-phase systems (ASTP systems) can be used for separation and purification of biomaterials. In this work we investigated the phase behavior and the partitioning of BSA and lysozyme in the ASTP system formed by mixtures of dodecyltriethylammonium bromide and sodium dodecylsulfate (SDS). The pseudo ternary phase diagram of these mixtures at low total surfactant concentrations contains two narrow two-phase regions, which represent two kinds of different ASTP systems formed when cationic and anionic surfactants are in excess, respectively (called ASTP-C and ASTP-A). The phase separation is associative, one phase is surfactant-rich, and the other phase is surfactant-depleted. Mechanisms behind the phase behavior are discussed. The phase behavior, especially phase separation time and phase volume ratio, is strongly influenced by total concentration and molar ratio of mixed surfactants. The effect of molar ratio is strong, which enables one to get desired phase systems also at very low total concentration by tuning the molar ratio of the surfactants. It was shown that the marked differences of surfactant concentration between the phases makes proteins distribute with different partitioning coefficients. The charges on the micellar surface, which can be adjusted by tuning the molar ratio of cationic surfactants to anionic surfactants, enhance the selectivity of protein partitioning by electrostatic effects. At pH 7.1, in the ASTP-C systems, negatively charged BSA is concentrated in the surfactant-rich phase and positively charged lysozyme in the surfactant-depleted phase, while in ASTP-A systems, a totally opposite partitioning was observed. It was shown that lysozyme could retain activity in ASTP systems.

Anions↗

PubMed2000

Mechanisms of phase behaviour and protein partitioning in detergent/polymer aqueous two-phase systems for purification of integral membrane proteins.

Detergent/polymer aqueous two-phase systems are studied as a fast, mild and efficient general separation method for isolation of labile integral membrane proteins. Mechanisms for phase behaviour and protein partitioning of both membrane-bound and hydrophilic proteins have been examined in a large number of detergent/polymer aqueous two-phase systems. Non-ionic detergents such as the Triton series (polyoxyethylene alkyl phenols), alkyl polyoxyethylene ethers (C(m)EO(n)), Tween series (polyoxyethylene sorbitol esters) and alkylglucosides form aqueous two-phase systems in mixtures with hydrophilic polymers, such as PEG or dextran, at low and moderate temperatures. Phase diagrams for these mixtures are shown and phase behaviour is discussed from a thermodynamic model. Membrane proteins, such as bacteriorhodopsin and cholesterol oxidase, were partitioned strongly to the micelle phase, while hydrophilic proteins, BSA and lysozyme, were partitioned to the polymer phase. The partitioning of membrane protein is mainly determined by non-specific hydrophobic interactions between detergent and membrane protein. An increased partitioning of membrane proteins to the micelle phase was found with an increased detergent concentration difference between the phases, lower polymer molecular weight and increased micelle size. Partitioning of hydrophilic proteins is mainly related to excluded volume effects, i.e. increased phase component size made the hydrophilic proteins partition more to the opposite phase. Addition of ionic detergent to the system changed the partitioning of membrane proteins slightly, but had a strong effect on hydrophilic proteins, and can be used for enhanced separation between hydrophilic proteins and membrane protein.

Detergents↗

PubMed2000

Compartmentalization of enzymes and distribution of products in aqueous two-phase systems.

Phase separation is a common phenomenon in water solutions of polymers due to "polymer incompatibility." Polymeric aqueous two-phase systems are much used for separations in biochemistry and cell biology. When macromolecules are included in a phase system, it is often possible to obtain a one-sided distribution to one of the phases, i.e., the macromolecule is compartmentalized within one aqueous phase. This chapter describes the thermodynamic forces which govern the partitioning of molecules in aqueous two-phase systems. For a high molecular weight macromolecule, e.g., an enzyme, both enthalpic and entropic effects contribute to a one-sided partitioning. Molecules of low molecular weight will be more evenly distributed between the phases. These mechanisms are significant in biological systems and can be used for enzyme reactors in bioconversions. Enzymatic reactions can take place with enzyme and substrate compartmentalized in one of the phases. A low-molecular weight product which is evenly partitioned between the phases can be continuously removed from the enzyme-substrate compartment. These principles are described in the enzymatic conversion of cellulose in an aqueous two-phase system.

Animals↗

PubMed2000

Effect of salts and surfactants on the partitioning of Fusarium solani pisi cutinase in aqueous two-phase systems of thermoseparating ethylene oxide/propylene oxide random copolymer and hydroxypropyl starch.

An aqueous two-phase system composed by a thermoseparating random copolymer of ethylene oxide/propylene oxide 50/50 (%w/w), Breox, and hydroxypropyl starch-Reppal PES 100 was evaluated for the partitioning of Fusarium solani pisi recombinant cutinase. The effect of several additives on the partitioning of pure cutinase was evaluated. Micelles of sodium dodecanoate provided a ten-fold increase of the partitioning coefficient (K=9) and recovery yields of 60-75%. The phase diagrams of the systems composed of Breox, Reppal and sodium dodecanoate were determined and it was found that in systems with high surfactant concentrations, the binodal was moved to lower polymer concentrations, enabling a two-phase system with 6% (w/w) of each polymer.

Buffers↗

PubMed2000

Aqueous polymer two-phase systems formed by new thermoseparating polymers.

A set of new polymers that can be used as phase forming components in aqueous two-phase systems is presented. All polymers studied have thermoseparating properties i.e. form one separate polymer enriched phase and one aqueous solution when heated above the critical temperature. This property makes the polymers attractive alternatives to the polymers used in traditional aqueous two-phase systems such as poly(ethylene glycol) (PEG) and dextran. The thermal phase separation simplifies recycling of the polymers, thus making the aqueous two-phase systems more cost efficient and suitable for use in large scale. Thermoseparating polymers studied have been copolymers of ethylene oxide and propylene oxide (EO-PO), poly (N-isopropylacrylamide) (poly-NIPAM), poly vinyl caprolactam (poly-VCL) and copolymers of N-isopropylacrylamide and vinyl caprolactam with vinyl imidazole (poly(NIPAM-VI) and poly(VCL-VI), respectively). In addition, the copolymer poly(NIPAM-VI) has the property to be uncharged at pH above 7.0 and positively charged at lower pH. This allows the partitioning of protein to be directed by changing the pH in the system instead of the traditional addition of salt to direct the partitioning. Hydrophobically modified EO-PO copolymer (HM-(EO-PO)) with alkyl groups (C14) at both ends forms two-phase system with for example poly(NIPAM-VI). The phase diagram for poly(NIPAM-VI)/HM-(EO-PO) was determined and the model proteins lysozyme and BSA were partitioned in this system. For BSA in poly(NIPAM-VI)/HM-(EO-PO) system a change in pH from 8.0 to 5.4 results in a change of partition coefficient from K = 0.8 to K = 5.1, i.e. BSA could be transferred from the HM-(EO-PO) phase to the poly(NIPAM-VI) phase. BSA partitioning in poly(NIPAM-VI)/HM-(EO-PO) system allows quantitative BSA recovery, and recoveries of poly(NIPAM-VI) and HM-(EO-PO) were 53% and 92%, respectively, after the thermoseparation step.

Animals↗

PubMed2000

Peptide fusion tags with tryptophan and charged residues for control of protein partitioning in PEG-potassium phosphate aqueous two-phase systems.

A partition study with peptides and recombinant proteins in poly(ethylene glycol)4000-potassium phosphate aqueous two-phase systems has been performed. The aim was to study to what extent the insertion of charged residues could affect protein partition in addition to the already observed effects of tryptophan residues. The model proteins used are based on a staphylococcal protein A derivative, Z, and modified by the insertion of peptide tags close to the C-terminus. The tags differed with respect to their content of both Trp, negatively (Asp) and positively charged (Lys) amino acid residues. The same partitioning trends were observed for the peptides and fusion proteins. The effect of Trp residues was to direct the partitioning towards the PEG phase. The insertion of two negatively charged (Asp) residues into a Trp4-tag enhanced the partition towards the PEG phase even more. The introduction of positively charged (Lys) residues in addition to Trp residues, on the other hand, pulled the peptide or protein towards the potassium phosphate phase. The partitioning of peptides gave a good qualitative picture of the effect of the peptide on partitioning when fused to the protein. The efficiencies of the tags were calculated based on partitioning of tags and fusion proteins, and tag efficiencies generally varied between 60 and 85%.

Amino Acid Sequence↗

PubMed1999

Purification of protein and recycling of polymers in a new aqueous two-phase system using two thermoseparating polymers.

In this study we present a new aqueous two-phase system where both polymers are thermoseparating. In this system it is possible to recycle both polymers by temperature induced phase separation, which is an improvement of the aqueous two-phase system previously reported where one of the polymers was thermoseparating and the other polymer was dextran or a starch derivative. The polymers used in this work are EO50PO50, a random copolymer of 50% ethylene oxide (EO) and 50% propylene oxide (PO), and a hydrophobically modified random copolymer of EO and PO with aliphatic C14H29-groups coupled to each end of the polymer (HM-EOPO). In water solution both polymers will phase separate above a critical temperature (cloud point for EO50PO50 50 degrees C, HM-EOPO, 14 degrees C) and this will for both polymers lead to formation of an upper water phase and a lower polymer enriched phase. When EO50PO50 and HM-EOPO are mixed in water, the solution will separate in two phases above a certain concentration i.e. an aqueous two-phase system is formed analogous to poly(ethylene glycol) (PEG)/dextran system. The partitioning of three proteins, bovine serum albumin, lysozyme and apolipoprotein A-1, has been studied in the EO50PO50/HM-EOPO system and how the partitioning is affected by salt additions. Protein partitioning is affected by salts in similar way as in traditional PEG/dextran system. Recombinant apolipoprotein A-1 has been purified from a cell free E. coli fermentation solution. Protein concentrations of 20 and 63 mg/ml were used, and the target protein could be concentrated in the HM-EOPO phase with purification factors of 6.6 and 7.3 giving the yields 66 and 45%, respectively. Recycling of both copolymers by thermoseparation was investigated. In protein free systems 73 and 97.5% of the EO50PO50 and HM-EOPO polymer could be recycled respectively. Both polymers were recycled after aqueous two-phase extraction of apolipoprotein A-1 from a cell free E. coli fermentation solution. Apolipoprotein A-1 was extracted to the HM-EOPO phase with contaminating proteins in the EO50PO50 phase. The yield (78%) and purification factor (5.5) of apolipoprotein A-1 was constant during three polymer recyclings. This new phase system based on two thermoseparating polymers is of great interest in large scale extractions where polymer recycling is of increasing importance.

Apolipoprotein A-I↗