Search PubMed⌕ Search

Biomedical subjects

F Robicsek

Publications and source records attributed to F Robicsek.

At least 19 recordsLinked to original sources

Acquired deformities of the anterior chest wall.

BACKGROUND: Acquired chest wall deformities are difficult to describe and to classify. We propose the following classification and treatment options. METHODS: We observed 11 patients with acquired deformities (AD) that required surgical correction. RESULTS: AD of the chest can be classified into 4 groups: (1) AD resulting from a pathological process within the thorax (heart enlargement, mediastinal tumors), (2) AD resulting from chest wall disease (rib osteomyelitis or tumors), (3) iatrogenic deformities (following rib graft harvesting, acquired Jeune's syndrome), and (4) post-traumatic deformities. Group 1 requires treatment of the pathological process. Group 2 is guided by oncological or infectious disease principles. Groups 3 and 4 require chest wall reconstruction. Iatrogenic AD usually occur after pectus excavatum repair with rib cartilage extirpation in young patients, which results in a reduced, restricted thorax. Post-traumatic AD often have pathological chest wall mobility owing to pseudo-articulation of injured ribs. CONCLUSIONS: To prevent AD formation and to protect thoracic growth and mobility, costosternal and costochondral junctions should be preserved during cartilage resection. Substernal suturing of the perichondrium should be avoided.

Cartilage↗

From Hippocrates to Palmaz-Schatz, the history of carotid surgery.

The extracranial carotid artery is the most common site for peripheral vascular procedures. Although the association of carotid disease and neurologic dysfunction was understood by the ancient Greeks, over 1700 years would pass before the relevant anatomy was described. In the 16th and 17th centuries, attempts at treatment of carotid injury and aneurysm by ligation were met with extremely high rates of stroke and death. It is not until the mid 20th century, with the introduction of carotid angiography and improved vascular surgical techniques, that the era of reconstructive carotid surgery begins. We present a synopsis of the history of carotid surgery from ancient times to present day.

Angioplasty↗

Changes in sternal blood flow after different methods of internal thoracic artery harvesting.

OBJECTIVE: The study was designed to assess the early changes in sternal perfusion after midline sternotomy and different (skeletonized versus semiskeletonized) techniques of internal thoracic artery (ITA) harvesting. METHODS: The experiments were performed in the swine model. After midline sternotomy, ITA harvesting (skeletonized technique) was performed unilaterally in Group I (6 animals). The ITA and the internal thoracic vein (ITV) were harvested (semiskeletonized technique) in Group II (5 animals). The contralateral sternal half served as a control. Using a thermographic camera with a 0.06 degrees C sensitivity, sternal perfusion was assessed 2 and 5 hours after surgery. RESULTS: Midline sternotomy alone did not affect sternal blood flow. A statistically significant ( p < 0.05) reduction in perfusion of the involved sternal half in comparison to the control side was detected at 2 and 5 hours after surgery. The degree of perfusion deficit was not related to the harvesting technique. CONCLUSIONS: Skeletonized and semiskeletonized ITA harvesting techniques caused a similar acute reduction in sternal perfusion during the early postoperative period and this effect lasted for at least 5 hours.

Animals↗

Effect of thrombus on abdominal aortic aneurysm wall dilation and stress.

AIM: Our goal is to understand how a mural thrombus may influence the pressure transmitted to and the dilation experienced by the abdominal aortic aneurysm (AAA) wall. METHODS: Two intact AAAs with mural thrombus were removed from patients and pressurized to 100 mmHg. The pressure was measured using a micro-tip needle transducer inserted in the aneurysm wall and advanced through the thrombus. In 1 patient with AAA, similar measurements were made in vivo. Also, in vitro, in the two aneurysms the dilation as a function of pressure was measured using the markers on the surface before and after the thrombus was removed. RESULTS: Both, in vitro and in vivo, in the presence of the thrombus the pressure transmitted to the aneurysm wall was 91+/-10% of luminal pressure and at 6 mm from the wall it was 96+/-5%. The aneurysm dilated more in the pressure range of 0-40 mmHg (2-8%) than in the range of 40-100 mmHg (0.4-1.8%). Upon removal of the thrombus these dilations increased significantly to 4-15% and 0.9-3.3%, respectively. Overall, the strains (dilation) in the circumferential and longitudinal directions were similar before the thrombus was removed. CONCLUSIONS: Even though the thrombus allows the transmission of luminal pressure to the aneurysm wall, it may prevent the aneurysm from rupture by diminishing the strain on the wall. Consistent with this, a mechanical model of the thrombus proposed is "a thrombus as a fibrous network adherent to the aneurysm wall".

Aged↗

Mechanical stress as cause of aortic valve disease. Presentation of a new aortic root prosthesis.

We present an overview of studies on the aortic valve and propose that mechanical stress is a main causative factor in the degenerative valvular disease. In the normal aortic valve, the leaflets have a smooth surface, free of wrinkles and creases, throughout the opening process. This smooth leaflet surface during motion is achieved by the "pull and release" movement of the commissures, which occurs because of the compliance of the aortic root. When the aortic root is stiffened, either by artificial means or by the loss of elasticity due to aging, the leaflet dynamics change significantly. The leaflets develop a significant number of creases and wrinkles during the opening process. In the bileaflet valve, the leaflets develop similar creasing and wrinkling during the opening process. This happens mainly due to the less-than-ideal design of the bileaflet valve and in spite of the compliant aortic root. When the aortic valve is spared using a noncompliant tube graft, a similar phenomenon of leaflet creasing occurs. Because the creasing produces high stresses from bending and buckling, it is damaging to the leaflet tissue and can lead to degenerative and calcific valvular disease. Based on these observations a new aortic root prosthesis with compliant sinuses has been designed for the valve sparing operation.

Aging↗

Wall stress studies of abdominal aortic aneurysm in a clinical model.

To estimate when an abdominal aortic aneurysm (AAA) may rupture, it is necessary to understand the forces responsible for this event. We investigated the wall stresses in an AAA in a clinical model. Using CT scans of the AAA, the diameter and wall thickness were measured and the model of the aneurysm was created. The wall stresses were determined using a finite element analysis in which the aorta was considered isotropic with linear material properties and was loaded with a pressure of 120 mmHg. The AAA was eccentric with a length of 10.5 cm, a diameter of 2.5 to 5.9 cm, and a wall thickness of 1.0 to 2.0 mm. The aneurysm had specific areas of high stress. On the inner surface the highest stress was 0.4 N/mm2 and occurred along two circumferentially oriented belts--one at the bulb and the other just below. The stress was longitudinal at the anterior region of the bulb and circumferential elsewhere, suggesting that a rupture caused by this stress will result in a circumferential tear at the anterior portion of the bulb and a longitudinal tear elsewhere. In the mid-surface the highest stress was 0.37 N/mm2 and occurred at two locations: the posterior region of the bulb and anteriorly just below. The stress was circumferential, suggesting that the rupture caused by this stress will produce a longitudinal tear. The location and orientation of the maximum stress were influenced more by the tethering force than by the wall thickness, luminal pressure, or wall stiffness. In conclusion, the rupture of an AAA is most likely to occur on the inner surface at the bulb. Such analytical approaches could lead to a better understanding of the aneurysm rupture and may be instrumental in planning surgical interventions.

Aortic Aneurysm, Abdominal↗

A new aortic root prosthesis with compliant sinuses for valve-sparing operations.

BACKGROUND: We designed and tested a novel aortic root prosthesis with compliant sinuses for valve-sparing operations. METHODS: In eight human aortic roots, the aorta was trimmed 2 mm above the leaflet attachment. The aortic portion of the graft was made by scalloping the Dacron tube. Three sinuses were made individually after turning z-folds in the fabric 90 degrees. Three rectangular pieces were cut and purse strings sewn in each to form the sinuses. The graft was sutured to the aortic root and studied in a left heart simulator. The leaflet motion was recorded (500 frames/second), commissural movement was measured with ultrasound, and the shape of the root was determined from a mold. Seven intact aortic roots were also studied. RESULTS: In the aortic graft roots, the valves were competent and leaflets opened rapidly into a circular orifice, not touching the sinus wall. Commissural diameter increased by 22% when pressure increased from 0 to 80 mm Hg, and increased by a further 6.6% when pressure increased to 120 mm Hg. The sinuses had a teardrop shape. CONCLUSIONS: The dynamics of the aortic graft root and the leaflets were comparable to that of the intact aortic root. This prosthesis is being introduced in clinical practice.

Aortic Valve↗

The influence of patient strength, aerobic capacity and body composition upon outcomes after coronary artery bypass grafting.

BACKGROUND: Physical activity, physical fitness and body habitus of patients may be important predictors of outcomes after cardiac surgery. This study sought to quantify physical fitness and determine whether components of fitness enhance the prediction of outcomes in a group of patients undergoing coronary artery bypass grafting. METHODS: A group of 200 patients were evaluated prior to coronary artery bypass surgery. A Veterans Specific Activity Questionnaire (VSAQ) measured aerobic capacity. A grip dynamometer assessed strength. Skin-fold thickness was used to calculate percent body fat and lean body mass index. Patients were divided into low risk (0-2.5%) and high risk (>2.5%) groups based on the STS National Cardiac Surgery Database prediction of operative mortality. RESULTS: Patients with both a high percent body fat and a low VSAQ were at higher risk for at least one serious complication (p<0.05) and a longer postoperative length of stay (p<0.05). CONCLUSION: This study suggests: 1) An index of physical fitness can be obtained preoperatively in cardiac surgical patients; 2) This information aids in the prediction of operative risk.

Aged↗

Stress analysis of the aortic valve with and without the sinuses of valsalva.

BACKGROUND AND AIM OF THE STUDY: In some patients with dilated aortic root, attempts have been made to replace the aorta and preserve the anatomically normal leaflets. The tubular Dacron graft used in the valve-sparing procedure does not have the sinuses of Valsalva, and therefore might adversely affect the valve. The effect of the presence or absence of the sinuses was investigated on stresses in the leaflets. METHODS: Finite element models of the tubular aortic root and the root with the sinuses were constructed. The model dimensions were: aorta radius 13 mm; valve height 18 mm; leaflet thickness 0.5 mm; aorta and sinus wall thickness 1.3 mm. In the root with the sinuses, each leaflet-sinus unit formed a cylindrical geometry. The model was loaded with an internal pressure of 80 mmHg (0.01 N/mm2) and the stress determined. RESULTS: The stress in the leaflet belly was 0.26 N/mm2, and not affected by the geometry and stiffness of the root. In the tubular root there was a stress concentration along the leaflet attachment, and the stress reached 0.65 N/mm2; in contrast, in the sinus root there was no stress concentration and maximum stress was only 0.3 N/mm2. Under pressure, the leaflet-sinus assembly expanded in a uniform manner, whereas in a tubular root large deformations occurred along the leaflet attachment. CONCLUSION: The sinuses of Valsalva play a very important role in minimizing stress in the leaflets; thus, use of the sinus graft is expected to enhance the longevity of the spared valve.

Aortic Valve↗

Etiology of degenerative disease of the tri-leaflet aortic valve: a simple explanation for a complex problem.

Risk factors for both atherosclerotic aortic wall disease and degenerative disease of the tri-leaflet aortic valve are very similar if not identical. This correlation grows even stronger as the person advances in years. Because of this, it is the prevailing view that sclerosis of the tri-leaflet aortic valve is a disease similar in etiology with sclerosis of the aortic wall. In other words, degenerative aortic valve disease is atherosclerosis of the aortic valve. Our studies challenge these views. The aortic valve is a functional assembly composed of the three cusps, corresponding sinuses, and the sinotubular junction, characterized not only by morphological features but also its functional properties, which together create an environment that is optimal for distribution of diastolic pressure load, and assures proper and timely valve opening and closure. Our experiments also demonstrate that loss of aortic wall compliance at the level of the sinuses leads to significant flexion stress in the aortic leaflets and it is likely to start a chain of events, which begins with mechanical damage to the leaflet microstructure then continues to more evident sclerosis, and finally ends in gross distortion and/or calcification of the cusps. The loss of the "pull-and-release" process may also play a part in disintegration of bioprosthetic valves and in degeneration of native aortic valves encased in non-compliant prostheses.

Adult↗

Apoptosis is initiated by myocardial ischemia and executed during reperfusion.

Ischemia/reperfusion leading to myocyte cell death has been reported as either necrotic or apoptotic or a combination of both. The importance of necrosis is well established but the role of apoptosis and the time of initiation are still unknown. Normothermic global ischemia of either 45 or 90 min duration followed by 6 h of reperfusion were induced in isolated canine hearts. After 45 min of ischemia, left ventricular function and adenine nucleotide (AN) content had recovered during reperfusion indicating reversible injury. DNA fragmentation determined by terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick end labeling (TUNEL) was absent as was the 85 kDa fragment of poly-(ADP-ribose) polymerase (PARP). After 90 min of ischemia, electron microscopy indicated necrotic cell death in 90% of myocytes. Recovery of function and AN content during reperfusion was minimal. At the end of ischemia, caspase-3 was activated in 30% of all myocytes and PARP 85 kDa fragments were present by Western blot, indicating initiation of the apoptotic cascade. Lamin-B(1)labeling was significantly reduced from 90% in myocytes in control and ischemia to 30% in early reperfusion. Completion of apoptosis seen by TUNEL was evident in late reperfusion (7.6% of myocytes and 8.3% of non-myocytes). Experiments with 6 h ischemia without reperfusion showed absence of DNA fragmentation. We conclude that apoptotic cell death is initiated by ischemia but that reperfusion is needed for completion of the apoptotic cascade. Furthermore, it is concluded that cell death in acute global ischemia followed by reperfusion occurs predominantly by necrosis and that apoptosis is of minor importance in this pathophysiological situation.

Adenine Nucleotides↗