Search PubMed⌕ Search

Biomedical subjects

F Hirayama

Publications and source records attributed to F Hirayama.

At least 109 records · Page 6Linked to original sources
PubMed1993

Preparation of heptakis(2,6-di-O-ethyl)-beta-cyclodextrin and its nuclear magnetic resonance spectroscopic characterization.

Heptakis(2,6-di-O-ethyl)-beta-cyclodextrin (DE-beta-CyD) was prepared and its 1H and 13C nuclear magnetic resonance (NMR) signals in DMSO-d6 were unequivocally assigned by two-dimensional COSY and ROESY. The results on 1H coupling constants indicated that all ethylated glucose units are in a 4C1 chair conformation. The average spin-lattice relaxation times (T1) of ring carbons of DE-beta-CyD were only slightly shorter, and their standard deviations from the mean T1 value were larger, than those of beta-cyclodextrin (beta-CyD) and heptakis(2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CyD), suggesting the presence of slightly irregular internal motion in the ethylated glucose units. The temperature dependence of chemical shift of DE-beta-CyD in DMSO-d6 suggested that the C3 hydroxyl protons may participate as proton donor in the intramolecular hydrogen bond to the C2 ethoxyl groups of neighboring glucose, and the intramolecular hydrogen bond of DE- and DM-beta-CyDs is much stronger than that of beta-CyD, suggesting the stable macrocyclic ring structure of DE-beta-CyD.

Chemical Phenomena↗
PubMed1993

Design and in-vitro evaluation of a modified-release oral dosage form of nifedipine by hybridization of hydroxypropyl-beta-cyclodextrin and hydroxypropylcellulose.

To modify the release rate of nifedipine, a potent calcium channel antagonist, a double-layer tablet was designed, anticipating a more balanced oral bioavailability and a prolonged efficacy than the simple plain tablet. Amorphous nifedipine powders prepared by spray-drying with 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) and nonionic surfactant HCO-60 were employed as a fast-release portion to attain an initial rapid dissolution of nifedipine. Hydroxypropylcelluloses (HPCs) with different viscosity grades (type L, M, and H) were used for a slow-release portion to provide an appropriate sustained-release. Taking into account the physiological conditions of the gastrointestinal tract (pH and motility), an optimal formulation of the double-layer tablet was obtained by changing the mixing ratios of each component. For example, the tablet consisting of HP-beta-CyD with 3% HCO-60/(HPC-L:HPC-M) in the weight ratio 1/2(1:1) provided a sufficient slow release of the drug over a wide pH region following an initial rapid dissolution. The release of nifedipine from the double-layer tablets was little affected by pH of the medium and rotation speed of paddle after accelerated storage conditions (60 degrees C, 75% r.h.). The present results suggest that a combination of HP-beta-CyD, HCO-60 and HPCs can serve as a modified-release carrier for poorly water-soluble nifedipine.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed1993

Inclusion complexation of p-hydroxybenzoic acid esters with 2-hydroxypropyl-beta-cyclodextrins. On changes in solubility and antimicrobial activity.

To obtain a transparent and effective solution of p-hydroxybenzoic acid esters (parabens), the use of 2-hydroxypropyl-beta-cyclodextrins (2-HP-beta-CyDs) as solubilizers with different degrees of substitution (D.S.) was surveyed. 2-HP-beta-CyDs significantly increased the aqueous solubility of four kinds of parabens (methyl < ethyl < propyl < butyl esters), where the solubilizing ability decreased with an increase in the D.S. of the 2-hydroxypropyl group in beta-CyD. The antimicrobial activity of the parabens tended to decrease by complexation with 2-HP-beta-CyDs. However, the activity could be maintained by lengthening the alkyl chain of the parabens. 1H- and 13C-nuclear magnetic resonance and circular dichroism spectroscopic studies suggest that the hydrophobic alkyl moiety of butyl paraben is preferably included in the cavity, and the phenol group extrudes from the cavity. The present results suggest that a suitable combination of 2-HP-beta-CyDs and hydrophobic, longer alkyl parabens is useful for the preservation of liquid formulations.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed1993

[Development and pharmaceutical evaluation of hydrophobic cyclodextrin derivatives as modified-release drug carriers].

Hydrophobic cyclodextrin (CyD) derivatives, such as 2,6-di-O-ethyl-beta-CyD (DE-beta-CyD), 2,3,6-tri-O-ethyl-beta-CyD (TE-beta-CyD), carboxymethylethyl-beta-CyDs (CME-beta-CyDs) with different degrees of substitution, 2,3,6-tri-O-acyl-beta-CyDs with different alkyl chains (C1-C12) were prepared and their chemical structures and physicochemical properties were elucidated. Furthermore, possible utilities of hydrophilic and hydrophobic CyD derivatives as modified-release drug carriers were evaluated on the basis of in vitro/in vivo correlations. The results obtained in this study are as follows: (1) Hydrophilic CyDs such as 2-hydroxypropyl-beta-CyD are useful as immediate-release type carriers for poorly water-soluble drugs such as nifedipine. (2) Hydrophobic CyDs such as ethylated and acylated beta-CyDs can be used as prolonged-release type carriers for water-soluble drugs such as diltiazem hydrochloride, buserelin acetate and molsidomine. (3) Enteric CME-beta-CyD derivatives are useful as delayed-release type carriers, and also as stabilizers for prostaglandin E and carmofur which are labile under alkaline conditions. (4) Various release rates can be obtained by combining hydrophilic and hydrophobic CyD derivatives in appropriate mixing ratios, e.g., double-layer tablets consisting of beta-CyD complex and DE-beta-CyD/CME-beta-CyD complexes released drugs rapidly at an initial stage, followed by slow release. The combination of CyD derivatives and pharmaceutical additives was also useful to modify the release rate of various drug molecules.

Animals↗
PubMed1992

Clonal proliferation of murine lymphohemopoietic progenitors in culture.

We have used a two-step clonal culture system to unequivocally demonstrate that individual primitive lymphohemopoietic progenitor cells have the capacity for differentiation along either the myeloid or the B-lymphoid lineage. Highly enriched murine marrow cells were plated individually in culture by micromanipulation in the presence of pokeweed mitogen-stimulated spleen cell conditioned medium, erythropoietin, steel factor (SF), and interleukin (IL) 7. Forty-five percent of the single cells formed primary colonies expressing multiple hemopoietic lineages. When aliquots from individual colonies were replated in secondary methyl cellulose culture containing SF and IL-7, 41% of the primary colonies gave rise to lymphocyte colonies. Cells of the lymphocyte colonies were blast-like and B220+, sIg-, Mac-1-, Gr-1-, Ly-1-, L3T4-, Ly-2-, and CD3-. Thirty to 70% of the cells were Thy-1+. mu-chain mRNA was detected in most of the cells by in situ hybridization with an antisense RNA probe. When lymphocyte colonies derived from a single cell were pooled and individually injected into scid mice, donor-type IgM was measurable in the serum of mice and spleens contained donor-type B cells. We then carried out initial screening of growth factors to identify growth factors that might replace pokeweed mitogen-stimulated spleen cell conditioned medium in the primary culture. Combinations of two factors that included SF plus IL-6, IL-11, or granulocyte colony-stimulating factor were all effective in the primary culture in the maintenance of the B-lymphoid potential. Interestingly, IL-3 could neither replace nor act synergistically with SF to support the lymphoid potential of the primary cultures. Our observations demonstrate that many primitive progenitors previously believed to be myeloid-committed also possess B-lymphoid potential. This culture system should prove valuable for elucidation of the mechanisms regulating early stages of lymphohemopoiesis.

Animals↗
PubMed1992

Prominent inclusion effect of dimethyl-beta-cyclodextrin on photoisomerization of the thromboxane synthetase inhibitor (E)-4-(1-imidazoylmethyl)cinnamic acid.

The direct photoisomerization of (E)-4-(1-imidazoylmethyl)-cinnamic acid (IMC), a thromboxane synthetase inhibitor, to its (Z)-isomer at pH 2.0 was decelerated by beta-cyclodextrin (beta-CyD) and heptakis(2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CyD). The photostationary composition [(Z)-isomer:IMC ratio] was shifted in favor of IMC. These effects were much greater with DM-beta-CyD than with the parent beta-CyD. The quantum yield of the photoisomerization was significantly decreased by complex formation with beta-CyDs, whereas the extinction coefficient of the guest was only slightly decreased. This situation was in sharp contrast to those observed in less polar solvents and suggests that the suppressing mechanism with beta-CyD is different from that with less polar solvent systems. Spectroscopic studies (ultraviolet, circular dichroism, and nuclear magnetic resonance) indicated that IMC is tightly included in an axial mode in the cavity of DM-beta-CyD and that the rotation of the photoreactive site is sterically hindered. The results suggest that the suppressing effect of beta-CyDs on the photoisomerization of IMC results mainly from a steric origin.

Cyclodextrins↗
PubMed1992

Acid-catalyzed hydrolysis of maltosyl-beta-cyclodextrin.

Maltosyl-beta-cyclodextrin was hydrolyzed via two pathways in acidic solution: (1) ring opening to give noncyclic oligosaccharides and (2) cleavage of maltose in the branched residue to give glucosyl-beta-CyD and glucose. Ring opening was approximately 2-3 times faster than maltose cleavage because of the multiple hydrolysis sites of the beta-cyclodextrin (beta-CyD) ring (seven glycosidic linkages) compared with only one reaction site of the maltose residue in the branch. Values of the enthalpy and entropy of activation of the hydrolyses were positive and in the range reported for maltose, a result indicating that the hydrolyses proceeded according to the A-1 mechanism (i.e., unimolecular decomposition). The alpha-1,6-glycosidic bond of branched beta-CyDs connecting beta-CyD and branched sugar moieties resisted hydrolysis; this property is a potential pharmaceutical advantage because the parent beta-CyD, which has low aqueous solubility, would not precipitate after hydrolysis.

Cyclodextrins↗
PubMed1992

Inhibitory effect of 2-hydroxypropyl-beta-cyclodextrin on crystal-growth of nifedipine during storage: superior dissolution and oral bioavailability compared with polyvinylpyrrolidone K-30.

To prevent the crystal-growth of nifedipine during storage, 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) was employed as a hydrophilic drug carrier and compared with polyvinylpyrrolidone K-30 (PVP). Amorphous nifedipine powders were prepared by spray-drying with HP-beta-CyD or PVP, and their crystal-growing behaviour at accelerated storage conditions were examined by X-ray diffraction analysis and microscopy. Although PVP initially retarded the crystallization of nifedipine, it failed to control the increase of crystal size after prolonged storage at 60 degrees C, 75% r.h., resulting in a remarkable decrease in dissolution rate in water. In sharp contrast, a relatively fine and uniform size of nifedipine crystals was maintained in the HP-beta-CyD system even after accelerated storage conditions. The enhanced dissolution observed for all the HP-beta-CyD systems in a dissolution medium containing 0.1% non-ionic surfactant HCO-60 were clearly reflected in the in-vivo absorption of nifedipine following oral administration to dogs. These results suggest that HP-beta-CyD is particularly useful in solving problems encountered on storage of amorphous nifedipine in solid dosage forms.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed1992

[Use of water-soluble beta-cyclodextrin derivatives as carriers of anti-inflammatory drug biphenylylacetic acid in rectal delivery].

To improve the rectal delivery of an anti-inflammatory drug, biphenylylacetic acid (BPAA), the use of 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) and heptakis (2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CyD) was investigated. Inclusion complex formations of BPAA with both beta-CyDs in a molar ratio of 1:1 in water were ascertained, and their stability constants were determined. The dissolution of BPAA in water and the release of BPAA from an oleaginous suppository (Witepsol H-5) were significantly increased by beta-CyDs, depending on the magnitude of the stability constants of the water-soluble complexes. However, the serum levels of BPAA after rectal administration of the suppositories containing BPAA or its beta-CyDs complexes in rats increased in the order of BPAA alone much less than DM-beta-CyD less than or equal to HP-beta-CyD complex. The in situ recirculation study revealed that the greater the stability constant of the complex, the lesser was the absorption of BPAA from the rectal lumen of rats under the solution state. Both in vivo and in situ studies demonstrated that rather high amount of HP-beta-CyD (about 20% of dose) was absorbable from the rat's rectum, compared with DM-beta-CyD (less than 5% of dose), suggesting the possibility of the permeation of BPAA through the rectal membrane in the form of HP-beta-CyD complex. Furthermore, DM-beta-CyD and HP-beta-CyD significantly reduced the irritation of the rectal mucosa caused by BPAA after the administration of the suppositories to rats.(ABSTRACT TRUNCATED AT 250 WORDS)

Administration, Rectal↗
PubMed1991

[Improvement of stability and bioavailability of 1-hexylcarbamoyl-5-fluorouracil (HCFU) by O-carboxymethyl-O-ethyl-beta- cyclodextrin].

The possible utility of O-carboxymethyl-O-ethyl-beta-cyclodextrin (CME-beta-CyD) as a novel drug carrier was studied in vitro and in vivo, by using 1-hexylcarbamoyl-5-fluorouracil (HCFU) as a model drug. The chemical instability of HCFU in solution and solid state was improved by CME-beta-CyD complexation. The in vitro release of HCFU from the CME-beta-CyD complex was decelerated in acidic solution, while accelerated at neutral pH regions, showing a typical delayed-release pattern. This pattern was clearly reflected in the blood levels after the oral administration of the complex to dogs, increasing the bioavailability. The present results suggested that CME-beta-CyD is useful as a delayed-release-type carrier for the oral administration of chemically labile HCFU.

Administration, Oral↗
PubMed1991

A new alkaloid antibiotic tetrazomine. Structure determination.

A new alkaloid antibiotic tetrazomine was isolated from the culture broth of Saccharothrix mutabilis subsp. chichijimaensis subsp. nov., and its structure was determined to be I by means of spectroscopic measurements. It has an unusual structure which consists of six rings, including piperidine, piperazine, oxazole, and pyrrolidine rings.

Alkaloids↗
PubMed1990

Slow-release characteristics of diltiazem from ethylated beta-cyclodextrin complexes.

Release characteristics of two ethylated beta-cyclodextrins [heptakis(2,6-di-O-ethyl)-beta-cyclodextrin (diethyl-beta-cyclodextrin) and heptakis(2,3,6-tri-O-ethyl)-beta-cyclodextrin (triethyl-beta-cyclodextrin)] as sustained-release drug carriers were evaluated using diltiazem hydrochloride, a water-soluble calcium antagonist. The release rate of diltiazem from compressed tablets was significantly retarded by the complexation with ethylated beta-cyclodextrin. Various environmental effects (such as pH, rotating speed, and additive in the dissolution medium) on the release rate were investigated, together with a microscopic observation of the tablet surface. The water penetration rate into the tablet was measured in order to gain insight into the release mechanism. The results suggested that diltiazem is released slowly from the hydrophobic matrix consisting of diethyl-beta-cyclodextrin following water penetration. When a single dose of tablets containing diethyl-beta-cyclodextrin complex was orally administered to dogs, the sustained-release pattern of the drug, without decrease in area under the plasma concentration-time curve, was produced for a long period. The release rate of diltiazem can be controlled by combining the ethylated beta-cyclodextrin complexes with the parent beta-cyclodextrin complex in different mixing ratios.

Animals↗
PubMed1990

Design and in vitro evaluation of slow-release dosage form of piretanide: utility of beta-cyclodextrin:cellulose derivative combination as a modified-release drug carrier.

To modify the release rate of piretanide, a potent loop diuretic, a double-layer tablet was designed, and in vitro release was evaluated. For a rapidly releasing portion, hydrophilic beta-cyclodextrin derivatives were employed to form a water-soluble complex with piretanide. For a sustained-release portion, cellulose derivatives were used to provide appropriate hydrophobicity. The release rate of piretanide in the pH range 1.2-6.8 was automatically monitored by a pH-changeable dissolution testing apparatus. The low solubility of piretanide in acidic medium was significantly improved by complexations with dimethyl-beta-cyclodextrin (DM-beta-CyD) and hydroxypropyl-beta-cyclodextrin (HP-beta-CyD). The pH-independent slow release was attained by use of hydroxypropylcellulose (HPC):ethylcellulose (EC) matrices. Then, an optimal formulation of a double-layer tablet was obtained by the combination of each fraction. For example, the tablet consisting of the [DM-beta-CyD/(HPC:EC)] system in the weight ratio [1/3(1:3)] provided a sufficiently slow release of the drug over a period of 8 h in a wide pH region following an initial rapid dissolution.

Cellulose↗
PubMed1990

Utility of 2-hydroxypropyl-beta-cyclodextrin in an intramuscular injectable preparation of nimodipine.

Possible utility of hydroxyalkylated beta-cyclodextrin (beta-CyD) derivatives as parenteral drug carriers was investigated, using nimodipine, a dihydropyridine derivative with calcium antagonistic action, as a model drug. The aqueous solubility of nimodipine increased linearly with increase in the concentration of hydroxyalkylated beta-CyDs, showing an AL-type phase solubility diagram. The stability constant of nimodipine--hydroxyalkylated beta-CyD complexes was in the order of 2,3-dihydroxypropyl-beta-CyD less than beta-CyD less than 2-hydroxyethyl-beta-CyD less than 3-hydroxypropyl-beta-CyD less than 2-hydroxypropyl-beta-CyD, and the solubilizing ability of the beta-CyDs was also in that order. The results of powder X-ray diffractometry and thermal analysis suggested 1:3 (guest:host) complex formation of nimodipine with 2-hydroxypropyl-beta-CyD in the solid state. The dissolution rate of nimodipine-2-hydroxypropyl-beta-CyD complex was much faster than that of the drug alone. Nimodipine-2-hydroxypropyl-beta-CyD complex gave higher plasma levels of the drug after intramuscular administration to rabbits, i.e., the area under the plasma concentration--time curve and the maximum plasma concentration of the complex were about 2.5 times higher than those of the drug alone. The muscular damage after the injection of nimodipine was reduced by the administration of the complexed form.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed1989

O-carboxymethyl-O-ethylcyclomaltoheptaose as a delayed-release-type drug carrier: improvement of the oral bioavailability of diltiazem in the dog.

The utility of O-carboxymethyl-O-ethylcyclomaltoheptose (carboxymethyl-ethyl-beta-cyclodextrin, CME-beta CD) as a delayed-release-type drug carrier was investigated in vitro and in vivo, using diltiazem hydrochloride as a model drug. The aqueous solubility of CME-beta CD showed a marked dependency on pH, because of the ionization of the carboxyl group (pKa 3.75). The formation of an inclusion complex between diltiazem and CME-beta CD in aqueous solution and in the solid state was assessed by a solubility method and by X-ray diffractometry, respectively. The rate of release of the drug from the compressed tablet containing the complex was significantly retarded in solutions at low pH and increased with increase in pH, and this was reflected in the blood levels in the dog after the oral administration. The results suggested that the use of CME-beta CD could improve the oral bioavailability of diltiazem and release the drug preferentially in the intestinal fluid but only slightly in the gastric fluid.

Absorption↗
PubMed1989

Some pharmaceutical properties of 3-hydroxypropyl- and 2,3-dihydroxypropyl-beta-cyclodextrins and their solubilizing and stabilizing abilities.

3-Hydroxypropyl- and 2,3-dihydroxypropyl-beta-cyclodextrins (3-HP- and DHP-beta-CyDs) with different degrees of substitution (D.S.) were prepared and their pharmaceutical properties were investigated. The aqueous solubility of 3-HP- and DHP-beta-CyDs was much higher than that of the parent beta-CyD and the dissolution of DHP-beta-CyD in water was endothermic. The acid- and alpha-amylase-catalyzed hydrolysis rates of 3-HP- and DHP-beta-CyDs were slower than those of the parent beta-CyD. The hemolytic activity (human erythrocytes) and local irritancy (rabbit muscle) of DHP-beta-CyD were considerably less than those of natural, methylated or other hydroxyalkylated beta-CyDs, and decreased with increasing D.S. The ability of the hydroxyalkylated beta-CyDs to remove cholesterol and proteins from human erythrocytes decreased with increasing D.S., and correlated well with their hemolytic activity. 3-HP-beta-CyD was a more effective solubilizer for poorly water-soluble drugs than the parent beta-CyD, and its stabilizing effect on chemically instable drugs was higher than that of the parent beta-CyD. The above data suggest a considerable pharmaceutical potential of 3-HP- and DHP-beta-CyDs as parenteral carriers.

Cyclodextrins↗
PubMed1989

Different effect of prostaglandin E2 on B-cell activation by two distinct B-cell differentiation factors, B151-TRF1/IL-5 and B151-TRF2: selective inhibition of B151-TRF2-induced antibody response through increases in intracellular cyclic AMP levels.

Effects of prostaglandin E2 (PGE2) on murine B-cell activation induced by two distinct B-cell differentiation factors, B151-TRF1/IL-5 and B151-TRF2, were examined. A final differentiation of unprimed B cells into IgM-producing cells induced by B151-TRF2 was markedly inhibited by PGE2 at physiological concentrations (around 10(-8) M), whereas B151-TRF1/IL-5- induced antibody responses of unprimed as well as activated B cells were not affected by PGE2, even at 10(-6) M. B-cell responses induced by B151-TRF2-like factors from autoimmune-prone MRL/lpr mice were also inhibited by PGE2. Biphasic increases in intracellular cyclic AMP (cAMP) levels were induced by culturing B cells with 10(-6) or 10(-8) M PGE2: rapid increases within 8 min and delayed increases around 16 hr. The direct addition of dibutyryl cAMP to cultures of B cells resulted in marked inhibition of antibody responses when stimulated with B151-TRF2 but not with B151-TRF1/IL-5. The B151-TRF2-induced antibody responses were also inhibited by cAMP-elevating reagents such as forskolin, cholera toxin and theophylline. Furthermore, 2'.5'-dideoxyadenosine, which is an inhibitor of adenylate cyclase, prevented the PGE2-mediated cAMP accumulation in unprimed B cells as well as the PGE2-mediated inhibition of B151-TRF2-induced B-cell responses when added at the initiation of culture. These results suggest that PGE2 inhibits B151-TRF2-induced antibody responses through the activation of adenylate cyclase and subsequent accumulation of intracellular cAMP, whereas B151-TRF1/IL-5-responsive B cells are resistant to the inhibitory effect of PGE2 and cAMP.

Adjuvants, Immunologic↗