Search PubMed⌕ Search

Biomedical subjects

F Arisaka

Publications and source records attributed to F Arisaka.

At least 37 records · Page 2Linked to original sources

Identification of kinesin neck region as a stable alpha-helical coiled coil and its thermodynamic characterization.

The kinesin heavy chain consists of an N-terminal globular domain, referred to as the motor domain, a rod-like middle region, and a C-terminal domain. In this study, the human kinesin neck region, the region adjacent to the motor domain which promotes dimerization, has been investigated. First, we predicted coiled-coil regions including the neck region by our newly devised statistical method. The sequence (335-372) was predominated by a unique heptad amphipathy. A comparison of the bacterially expressed human kinesin heavy chain fragments, K349 (1-349), a monomeric motor domain, and K379 (1-379), a dimer, by circular dichroism (CD) spectroscopy showed that K379 had more alpha-helical content. Chemically synthesized peptides, (332-349), (350-379), and (332-369), gave CD spectra with an alpha-helix-rich pattern, but the spectra varied depending on the peptide concentration. Analysis of the molar ellipticity at 222 nm indicated that those peptides were in monomer-dimer equilibria, and the dissociation isotherms established dissociation constants of 9.6 mM. 60 microM, and 62 nM for the above peptides, respectively. Sedimentation equilibrium measurements verified that the peptide (332-369) existed as a dimeric form. These results strongly suggest that the sequence from 332 to 369 of the neck region forms an alpha-helical coiled coil. The differential peptide of K349 and K379, (350-379), did not show sufficient ability to make K379 dimeric. It is likely that the region (350-379) forms a stable alpha-helical coiled coil only together with the (332-349) region. Fluorescence energy transfer studies of [Cys363]-(332-369) labeled with a fluorescence donor and an acceptor revealed that the peptide formed a parallel coiled coil. This coiled coil was thermodynamically stable against urea and thermal denaturation, and peptide exchange of the coiled coil was undetectable, or extremely slow, at neutral pH. The dissociation free energy was estimated to be 57.7 kJ mol-1 at a peptide concentration of 22 microM. These results indicate that the neck region of kinesin forms a stable coiled coil which may be important for the motility of dimeric kinesin.

Amino Acid Sequence↗

Isolation and characterization of a molecular chaperone, gp57A, of bacteriophage T4.

A molecular chaperone of bacteriophage T4, gp57A, which facilitates the formation of the long and short tail fibers, was isolated and characterized by peptide analysis, sedimentation equilibrium, and circular dichroism (CD). Sequence analysis confirmed the predicted sequence of 79 amino acids from the nucleotide sequence of the gene with the N-terminal methionine removed. The result led to the conclusion that the apparent smaller molecular weight of 6,000 from Tricine-sodium dodecyl sulfate-polyacrylamide gel electrophoresis than the expected molecular weight of 8,710 was due to its abnormal electrophoretic behavior instead of cleavage or processing of the gene product. Estimation of the secondary structure from far-UV CD indicated a 94% alpha-helix content, which was in accord with the prediction from the primary structure. A sedimentation equilibrium study, on the other hand, revealed that gp57A assumes a tetrameric subunit structure.

Amino Acid Sequence↗

Synthesis of alpha-helix-forming peptides by gene engineering methods and their characterization by circular dichroism spectra measurements.

Two kinds of peptides which were considered to form alpha-helices were designed and characterized. One was "alpha(3)-peptide' with 21 residues comprising three repeats of the seven-residue sequence Leu-Glu-Thr-Leu-Ala-Lys-Ala. This peptide appeared to be amphipathic due to a hydrophobic surface of Leu residues and a hydrophilic surface of Lys and Glu residues, thus forming a bundle structure. The other was "alpha(3)-GPRRG-alpha(3) peptide' with 47 residues in which two alpha(3)-peptides were connected by the five-residue sequence Gly-Pro-Arg-Arg-Gly. The genes encoding these peptides were fused to the adenylate kinase gene via a methionine codon. The resulting fused protein was expressed as an inclusion body, and the peptides were purified after cleavage with BrCN. The stability of the peptides in various buffers was then examined by measuring their circular dichroism spectra. The alpha(3)-peptide showed concentration-dependent stabilization of the alpha-helix. Sedimentation equilibrium ultracentrifugation indicated that it formed a bundle structure composed of four polypeptide chains, and a dimer intermediate during oligomerization was also detected by analytical gel-filtration. The stability of the alpha(3)-peptide was decreased by shifting the pH to 2 or 12, due to electrostatic repulsion of charged residues. Thus, the alpha(3)-peptide was stabilized by increasing the ionic strength, particularly in acidic or alkaline buffer, through the masking of the repulsion by high salt concentration. In buffer of neutral pH and a high salt concentration, the alpha(3)-peptide at high concentration formed visible aggregates, due possibly to the exposed hydrophobic surfaces of the alpha-helical bundles. On the other hand, alpha(3)-GPRRG-alpha(3) peptide did not show concentration-dependent reversible dissociation and association. It was shown to exist as a trimer even at low concentration, indicating very tight association of the alpha(3)-GPRRG-alpha(3) peptide. In contrast to the alpha(3)-peptide, the alpha(3)-GPRRG-alpha(3) peptide was very stable at various pH values and salt concentrations. This seemed to be due to increased hydrophobic interactions resulting from the increase in the number of seven-residue repeats from three to six, even though each group of three repeats was separated by a five-residue sequence.

Amino Acid Sequence↗

Purification and characterization of virus-like particles and pentamers produced by the expression of SV40 capsid proteins in insect cells.

Three capsid proteins of SV40 (VP1, VP2, and VP3) were expressed in insect cells using recombinant baculoviruses. When the VP1 capsid protein was expressed alone or co-expressed with VP2 and VP3, virus-like particles (VLP) were produced. In the latter case, the minor capsid proteins, VP2 and VP3, were incorporated into the VLP. VLPs with and without VP2 and VP3, and the wild type SV40 virions were indistinguishable under electron microscope. The sedimentation coefficient, S20,w' obtained for the VLP consisting of VP1 alone (VP1-VLP) was 170 S, and that for the VLP consisting of all of the capsid proteins (VP1/2/3-VLP) was 174 S. Treatment of the VP1-VLP with a calcium ion chelating agent and a reducing agent caused dissociation of the VP1-VLP. The dissociated and purified VP1 proteins were identified as pentamers of VP1 based on the molecular weight determination by sedimentation equilibrium. The pentamers were shown to possess the ability to re-assemble into VLP which had the S20,w of 141S. The results are discussed in relation to the morphogenesis of SV40.

Animals↗

Atomic force microscopy of bacteriophage T4 and its tube-baseplate complex.

Bacteriophage T4 was imaged by atomic force microscopy with the finest resolution to date with a clear image of tail fibers of an estimated diameter of 2-3 nm. T4 phages were spread on a clean surface of silicon wafer and dried under air before observation with an atomic force microscope. The head, tail and tail fibers were routinely imaged with somewhat distorted dimensions. The ease of imaging isolated phage particles with a good resolution raised our expectation for the further use of AFM in biomedical applications.

Bacteriophage T4↗

Structural studies of the contractile tail sheath protein of bacteriophage T4. 1. Conformational change of the tail sheath upon contraction as probed by differential chemical modification.

Differential chemical modifications of tyrosine residues of the tail sheath protein, gp18, were performed to elucidate the structural change of the tail sheath upon contraction. Tyrosine residues of monomeric gp18, extended tail sheath, and contracted tail sheath were nitrated by tetranitromethane, and the modified tyrosine residues in each state of the sheath protein were identified by peptide mapping and amino acid sequence analyses of the isolated peptides. Of 31 tyrosine residues in gp18 monomer or in the extended sheath, 12 or 13 residues (Tyr63 and/or -73, -225, -254, -270, -304, -455, -460, -493, -532, -535, -569, and -590) were modified. When photo-CIDNP difference spectra were measured with monomeric gp18, two peaks, which are due to highly exposed tyrosine residues on the molecular surface of gp18, were observed. These two peaks disappeared when the monomeric gp18 was nitrated. With contracted sheath, however, only eight tyrosine residues (Tyr225, -254, -270, -455, -460, -493, -532, and -535) were nitrated on the contracted sheath. Chemical modification of cysteine residues by sulfhydryl group specific reagent ABD-F [(4-aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole] revealed that, among five cysteine residues, Cys377, Cys477, and Cys607 have a sulfhydryl group. Cys402 and Cys406 were modified only under reducing conditions, which strongly suggested the presence of a disulfide bond between these two residues.

Chemical Phenomena↗

Structural studies of the contractile tail sheath protein of bacteriophage T4. 2. Structural analyses of the tail sheath protein, Gp18, by limited proteolysis, immunoblotting, and immunoelectron microscopy.

The molecular structure of the T4 phage tail sheath protein, gp18, was studied by limited proteolysis, immunoblotting, and immunoelectron microscopy. Gp18 is extremely resistant to proteolysis in the assembled form of either extended or contracted sheaths, but it is readily cleaved by proteases in the monomeric form, giving rise to stable protease-resistant fragments. Limited proteolysis with trypsin gave rise to a trypsin-resistant fragment, Ala82-Lys316, with a molecular weight of 27K. Chymotrypsin- and thermolysin-resistant fragments were also mapped close to the trypsin-resistant region. The time course of trypsin digestion of the monomeric gp18 as monitored by SDS-polyacrylamide gel electrophoresis and immunoblotting of the gel revealed that the polypeptide chain consisting of 658 amino acid residues is sequentially cleaved at several positions from the C terminus. The N-terminal portion, Thr1-Arg81, was then removed to form the trypsin-resistant fragment. Immunoelectron microscopy revealed that the polyclonal antibodies against the trypsin-resistant fragment bound to the tail sheath. This supported the idea that at least part of the protease-resistant region of gp18 constitutes the protruding part of the sheath protein as previously revealed with three-dimensional image reconstruction from electron micrographs by Amos and Klug [Amos, L. A., & Klug, A. (1975) J. Mol. Biol. 99, 51-73].

Amino Acid Sequence↗

Nucleotide sequence of the tail tube structural gene of bacteriophage T4.

The nucleotide sequence of gene 19 of bacteriophage T4, the structural gene of the tail tube protein, was determined by both the dideoxy and the Maxam-Gilbert methods. The predicted Mr of tube protein gene product 19 is 18,842. The N-terminal amino acid of the tube protein was determined by Edman degradation, and the C-terminal sequence was confirmed by isolation of the C-terminal tryptic peptide. In the noncoding region between genes 18 and 19, there are two late-T4-promoter consensus sequences, 51 bases apart. The implication of the two late promoter sequences was examined by an S1 nuclease protection experiment. Both serve as weak promoters, but the bulk of the transcripts arise from further upstream of the two promoters.

Amino Acid Sequence↗

Nucleotide sequence of the tail sheath gene of bacteriophage T4 and amino acid sequence of its product.

The nucleotide sequence of gene 18 of bacteriophage T4 was determined by the Maxam-Gilbert method, partially aided by the dideoxy method. To confirm the deduced amino acid sequence of the tail sheath protein (gp18) that is encoded by gene 18, gp18 was extensively digested by trypsin or lysyl endopeptidase and subjected to reverse-phase high-performance liquid chromatography. Approximately 40 peptides, which cover 88% of the primary structure, were fractionated, the amino acid compositions were determined, and the corresponding sequences in DNA were identified. Furthermore, the amino acid sequences of 10 of the 40 peptides were determined by a gas phase protein sequencer, including N- and C-terminal sequences. Thus, the complete amino acid sequence of gp18, which consists of 658 amino acids with a molecular weight of 71,160, was determined.

Amino Acid Sequence↗

Circular dichroism spectra show abundance of beta-sheet structure in connectin, a muscle elastic protein.

Circular dichroism spectra of native connectin from chicken breast muscle strongly suggested the abundant presence of beta-sheet structure, as much as 70% in 0.5 M KCl and 50 mM phosphate buffer, pH 7.5. alpha-Helix was not detected. These results are in contradiction with the conclusion that native connectin from rabbit skeletal muscle consists entirely of random coil [(1984) J. Mol. Biol. 180, 331-356].

Animals↗

A novel method for selective isolation of C-terminal peptides from tryptic digests of proteins by immobilized anhydrotrypsin: application to structural analyses of the tail sheath and tube proteins from bacteriophage T4.

A novel method useful for selective isolation of the C-terminal peptide from a tryptic digestion mixture of a protein has been developed by taking advantage of a unique property of anhydrotrypsin, which has a strong specific affinity for the peptides containing arginine or lysine at their C-termini. Briefly, peptides produced by tryptic digestion of a protein are fractionated by affinity chromatography on a column of immobilized anhydrotrypsin. The C-terminal peptide is recovered in a breakthrough fraction, while the remainders are adsorbed on the column (unless the protein ends in arginine or lysine). The breakthrough fraction is then subjected to reversed-phase high-performance liquid chromatography in order to purify the C-terminal peptide. Using this method, we have successfully isolated the C-terminal peptides from tryptic digests of the sheath protein (gp 18) and the tube protein (gp 19) of bacteriophage T4. The analytical results on these peptides, together with the information on the N-terminal structures of the original proteins and on the nucleotide sequences of genes 18 and 19, allowed us to establish the complete primary structures of the two proteins.

Amino Acid Sequence↗

Isolation and characterization of the bacteriophage T4 tail-associated lysozyme.

Direct evidence has been obtained that the tail-associated lysozyme of bacteriophage T4 (tail-lysozyme) is gp5, which is a protein component of the hub of the baseplate. Tails were treated with 3 M guanidine hydrochloride containing 1% Triton X-100, and the tail-lysozyme was separated from other tail components by preparative isoelectric focusing electrophoresis as a peak with a pI of 8.4. The molecular weight as determined from sodium dodecyl sulfate electrophoresis was 42,000. The tail-lysozyme was unambiguously identified as gp5 when the position of the lysozyme was compared with that of gp5 of tube-baseplates from 5ts1/23amH11/eL1ainfected Escherichia coli cells by two-dimensional gel electrophoresis. The tail-lysozyme has N-acetylmuramidase activity and the same substrate specificity as gene e lysozyme; the optimum pH is around 5.8, about 1 pH unit lower than for the e lysozyme. We assume that the tail-lysozyme plays an essential role in locally digesting the peptidoglycan layer to let the tube penetrate into the periplasmic space. The tail-lysozyme is presumably also responsible for "lysis from without."

Hydrogen-Ion Concentration↗