Biomedical subjects

Evgeni V Sokurenko

Publications and source records attributed to Evgeni V Sokurenko.

15 recordsLinked to original sources

PubMed2006

Weak rolling adhesion enhances bacterial surface colonization.

Bacterial adhesion to and subsequent colonization of surfaces are the first steps toward forming biofilms, which are a major concern for implanted medical devices and in many diseases. It has generally been assumed that strong irreversible adhesion is a necessary step for biofilm formation. However, some bacteria, such as Escherichia coli when binding to mannosylated surfaces via the adhesive protein FimH, adhere weakly in a mode that allows them to roll across the surface. Since single-point mutations or even increased shear stress can switch this FimH-mediated adhesion to a strong stationary mode, the FimH system offers a unique opportunity to investigate the role of the strength of adhesion independently from the many other factors that may affect surface colonization. Here we compare levels of surface colonization by E. coli strains that differ in the strength of adhesion as a result of flow conditions or point mutations in FimH. We show that the weak rolling mode of surface adhesion can allow a more rapid spreading during growth on a surface in the presence of fluid flow. Indeed, an attempt to inhibit the adhesion of strongly adherent bacteria by blocking mannose receptors with a soluble inhibitor actually increased the rate of surface colonization by allowing the bacteria to roll. This work suggests that (i) a physiological advantage to the weak adhesion demonstrated by commensal variants of FimH bacteria may be to allow rapid surface colonization and (ii) antiadhesive therapies intended to prevent biofilm formation can have the unintended effect of enhancing the rate of surface colonization.

Adhesins, Escherichia coli↗

PubMed2006

Haplotype diversity in "source-sink" dynamics of Escherichia coli urovirulence.

FimH, the mannose-specific, type 1 fimbrial adhesin of Escherichia coli, acquires amino acid replacements adaptive in extraintestinal niches (the genitourinary tract) but detrimental in the main habitat (the large intestine). This microevolutionary dynamics is reminiscent of an ecological "source-sink" model of continuous species spread from a stable primary habitat (source) into transient secondary niches (sink), with eventual extinction of the sink-evolved populations. Here, we have adapted two ecological analytical tools-diversity indexes DS and alpha--to compare size and frequency distributions of fimH haplotypes between evolutionarily conserved FimH variants ("source" haplotypes) and FimH variants with adaptive mutations (putative "sink" haplotypes). Both indexes show two- to threefold increased diversity of the sink fimH haplotypes relative to the source haplotypes, a pattern that ran opposite to those seen with nonstructural fimbrial genes (fimC and fimI) and housekeeping loci (adk and fumC) but similar to that seen with another fimbrial adhesin of E. coli, papG-II, also implicated in extraintestinal infections. The increased diversity of the sink pool of adhesin genes is due to the increased richness of the haplotypes (the number of unique haplotypes), rather than their evenness (the extent of similarity in relative abundances). Taken together, this pattern supports a continuous emergence and extinction of the gene alleles adaptive to virulence sink habitats of E. coli, rather than a one-time change in the habitat conditions. Thus, ecological methods of species diversity analysis can be successfully adapted to characterize the emergence of microbial virulence in bacterial pathogens subject to source-sink dynamics.

Adhesins, Escherichia coli↗

PubMed2006

Catch bond-mediated adhesion without a shear threshold: trimannose versus monomannose interactions with the FimH adhesin of Escherichia coli.

The FimH protein is the adhesive subunit of Escherichia coli type 1 fimbriae. It mediates shear-dependent bacterial binding to monomannose (1M)-coated surfaces manifested by the existence of a shear threshold for binding, below which bacteria do not adhere. The 1M-specific shear-dependent binding of FimH is consistent with so-called catch bond interactions, whose lifetime is increased by tensile force. We show here that the oligosaccharide-specific interaction of FimH with another of its ligands, trimannose (3M), lacks a shear threshold for binding, since the number of bacteria binding under static conditions is higher than under any flow. However, similar to 1M, the binding strength of surface-interacting bacteria is enhanced by shear. Bacteria transition from rolling into firm stationary surface adhesion as the shear increases. The shear-enhanced bacterial binding on 3M is mediated by catch bond properties of the 1M-binding subsite within the extended oligosaccharide-binding pocket of FimH, since structural mutations in the putative force-responsive region and in the binding site affect 1M- and 3M-specific binding in an identical manner. A shear-dependent conversion of the adhesion mode is also exhibited by P-fimbriated E. coli adhering to digalactose surfaces.

Adhesins, Bacterial↗

PubMed2006

Source-sink dynamics of virulence evolution.

To understand the evolution of genetic diversity within species--bacterial and others--we must dissect the first steps of genetic adaptation to novel habitats, particularly habitats that are suboptimal for sustained growth where there is strong selection for adaptive changes. Here, we present the view that bacterial human pathogens represent an excellent model for understanding the molecular mechanisms of the adaptation of a species to alternative habitats. In particular, bacterial pathogens allow us to develop analytical methods to detect genetic adaptation using an evolutionary 'source-sink' model, with which the evolution of bacterial pathogens can be seen from the angle of continuous switching between permanent (source) and transient (sink) habitats. The source-sink model provides a conceptual framework for understanding the population dynamics and molecular mechanisms of virulence evolution.

Adaptation, Biological↗

PubMed2006

Clonal analysis reveals high rate of structural mutations in fimbrial adhesins of extraintestinal pathogenic Escherichia coli.

Type 1 fimbriae of Escherichia coli mediate mannose-specific adhesion to host epithelial surfaces and consist of a major, antigenically variable pilin subunit, FimA, and a minor, structurally conserved adhesive subunit, FimH, located on the fimbrial tip. We have analysed the variability of fimA and fimH in strains of vaginal and other origin that belong to one of the most prominent clonal groups of extraintestinal pathogenic E. coli, comprised of O1:K1-, O2:K1- and O18:K1-based serotypes. Multiple locus sequence typing (MLST) of this group revealed that the strains have identical (at all but one nucleotide position) eight housekeeping loci around the genome and belong to the ST95 complex defined by the publicly available E. coli MLST database. Multiple highly diverse fimA alleles have been introduced into the ST95 clonal complex via horizontal transfer, at a frequency comparable to that of genes defining the major O- and H-antigens. However, no further significant FimA diversification has occurred via point mutation after the transfers. In contrast, while fimH alleles also move horizontally (along with the fimA loci), they acquire point amino acid replacements at a higher rate than either housekeeping genes or fimA. These FimH mutations enhance binding to monomannose receptors and bacterial tropism for human vaginal epithelium. A similar pattern of rapid within-clonal structural evolution of the adhesive, but not pilin, subunit is also seen, respectively, in papG and papA alleles of the di-galactose-specific P-fimbriae. Thus, while structurally diverse pilin subunits of E. coli fimbriae are under selective pressure for frequent horizontal transfer between clones, the adhesive subunits of extraintestinal E. coli are under strong positive selection (Dn/Ds > 1 for fimH and papG) for functionally adaptive amino acid replacements.

Adhesins, Escherichia coli↗

PubMed2006

Elevated shear stress protects Escherichia coli cells adhering to surfaces via catch bonds from detachment by soluble inhibitors.

Soluble inhibitors find widespread applications as therapeutic drugs to reduce the ability of eukaryotic cells, bacteria, or viruses to adhere to surfaces and host tissues. Mechanical forces resulting from fluid flow are often present under in vivo conditions, and it is commonly presumed that fluid flow will further add to the inhibitive effect seen under static conditions. In striking contrast, we discover that when surface adhesion is mediated by catch bonds, whose bond life increases with increased applied force, shear stress may dramatically increase the ability of bacteria to withstand detachment by soluble competitive inhibitors. This shear stress-induced protection against inhibitor-mediated detachment is shown here for the fimbrial FimH-mannose-mediated surface adhesion of Escherichia coli. Shear stress-enhanced reduction of bacterial detachment has major physiological and therapeutic implications and needs to be considered when developing and screening drugs.

Adhesins, Escherichia coli↗

PubMed2006

Uncoiling mechanics of Escherichia coli type I fimbriae are optimized for catch bonds.

We determined whether the molecular structures through which force is applied to receptor-ligand pairs are tuned to optimize cell adhesion under flow. The adhesive tethers of our model system, Escherichia coli, are type I fimbriae, which are anchored to the outer membrane of most E. coli strains. They consist of a fimbrial rod (0.3-1.5 microm in length) built from a helically coiled structural subunit, FimA, and an adhesive subunit, FimH, incorporated at the fimbrial tip. Previously reported data suggest that FimH binds to mannosylated ligands on the surfaces of host cells via catch bonds that are enhanced by the shear-originated tensile force. To understand whether the mechanical properties of the fimbrial rod regulate the stability of the FimH-mannose bond, we pulled the fimbriae via a mannosylated tip of an atomic force microscope. Individual fimbriae rapidly elongate for up to 10 microm at forces above 60 pN and rapidly contract again at forces below 25 pN. At intermediate forces, fimbriae change length more slowly, and discrete 5.0 +/- 0.3-nm changes in length can be observed, consistent with uncoiling and coiling of the helical quaternary structure of one FimA subunit at a time. The force range at which fimbriae are relatively stable in length is the same as the optimal force range at which FimH-mannose bonds are longest lived. Higher or lower forces, which cause shorter bond lifetimes, cause rapid length changes in the fimbria that help maintain force at the optimal range for sustaining the FimH-mannose interaction. The modulation of force and the rate at which it is transmitted from the bacterial cell to the adhesive catch bond present a novel physiological role for the fimbrial rod in bacterial host cell adhesion. This suggests that the mechanical properties of the fimbrial shaft have codeveloped to optimize the stability of the terminal adhesive under flow.

Adhesins, Bacterial↗

PubMed2005

Distinctive features of the biological catch bond in the jump-ramp force regime predicted by the two-pathway model.

The receptor-ligand unbinding in the biological catch bond is analyzed within a simple model that comprises a single bound state and two unbinding pathways. This model is investigated in detail for the jump-ramp force regime, where the pulling force quickly jumps to a finite value and then is ramped linearly with time. Two qualitative criteria are identified that distinguish the catch bond from the slip bond. First, the rupture force probability density of the catch-bond exhibits a maximum-minimum pair, which develops at finite forces. In contrast, the slip bond produces a maximum that first appears at zero force. Second, the catch bond can be identified over a wide range of ramp rates by high rupture probabilities at low forces relative to the probability at the maximum, in contrast to the slip bond, where the probability at the maximum always corresponds to the most likely rupture force. Both distinctive features of the catch bond are masked by large jump forces, indicating that the catch bond is best identified in experiments with moderate loading rates and small jump forces. The catch-bond lifetime in the constant force regime is related to the probability density in the jump-ramp regime, allowing one to determine the bond lifetime for a constant force by measuring the initial probability density in the jump-ramp experiments with different jump forces and a fixed ramp rate. The key analytic results are illustrated with the P -selectin/P-selectin glucoprotein ligand-1 bond.

Biophysics↗

PubMed2005

The two-pathway model for the catch-slip transition in biological adhesion.

Some recently studied biological noncovalent bonds have shown increased lifetime when stretched by mechanical force. In each case these counterintuitive "catch-bonds" have transitioned into ordinary "slip-bonds" that become increasingly shorter lived as the tensile force on the bond is further increased. We describe analytically how these results are supported by a physical model whereby the ligand escapes the receptor binding site via two alternative routes, a catch-pathway that is opposed by the applied force and a slip-pathway that is promoted by force. The model predicts under what conditions and at what critical force the catch-to-slip transition would be observed, as well as the degree to which the bond lifetime is enhanced at the critical force. The model is applied to four experimentally studied systems taken from the literature, involving the binding of P- and L-selectins to sialyl Lewis(X) oligosaccharide-containing ligands. Good quantitative fit to the experimental data is obtained, both for experiments with a constant force and for experiments where the force increases linearly with time.

Adhesiveness↗

PubMed2004

Selection footprint in the FimH adhesin shows pathoadaptive niche differentiation in Escherichia coli.

Spread of biological species from primary into novel habitats leads to within-species adaptive niche differentiation and is commonly driven by acquisition of point mutations in individual genes that increase fitness in the alternative environment. However, finding footprints of adaptive niche differentiation in specific genes remains a challenge. Here we describe a novel method to analyze the footprint of pathogenicity-adaptive, or pathoadaptive, mutations in the Escherichia coli gene encoding FimH-the major, mannose-sensitive adhesin. Analysis of distribution of mutations across the nodes and branches of the FimH phylogenetic network shows (1) zonal separation of evolutionary primary structural variants of FimH and recently derived ones, (2) dramatic differences in the ratio of synonymous and nonsynonymous changes between nodes from different zones, (3) evidence for replacement hot-spots in the FimH protein, (4) differential zonal distribution of FimH variants from commensal and uropathogenic E. coli, and (5) pathoadaptive functional changes in FimH brought by the mutations. The selective footprint in fimH indicates that the pathoadaptive niche differentiation of E. coli is either in its initial stages or undergoing an evolutionary "source/sink" dynamic.

Adaptation, Biological↗

PubMed2004

Shear-dependent 'stick-and-roll' adhesion of type 1 fimbriated Escherichia coli.

It is generally assumed that bacteria are washed off surfaces as fluid flow increases because they adhere through 'slip-bonds' that weaken under mechanical force. However, we show here that the opposite is true for Escherichia coli attachment to monomannose-coated surfaces via the type 1 fimbrial adhesive subunit, FimH. Raising the shear stress (within the physiologically relevant range) increased accumulation of type 1 fimbriated bacteria on monomannose surfaces by up to two orders of magnitude, and reducing the shear stress caused them to detach. In contrast, bacterial binding to anti-FimH antibody-coated surfaces showed essentially the opposite behaviour, detaching when the shear stress was increased. These results can be explained if FimH is force-activated; that is, that FimH mediates 'catch-bonds' with mannose that are strengthened by tensile mechanical force. As a result, on monomannose-coated surfaces, bacteria displayed a complex 'stick-and-roll' adhesion in which they tended to roll over the surface at low shear but increasingly halted to stick firmly as the shear was increased. Mutations in FimH that were predicted earlier to increase or decrease force-induced conformational changes in FimH were furthermore shown here to increase or decrease the probability that bacteria exhibited the stationary versus the rolling mode of adhesion. This 'stick-and-roll' adhesion could allow type 1 fimbriated bacteria to move along mannosylated surfaces under relatively low flow conditions and to accumulate preferentially in high shear regions.

Adhesins, Escherichia coli↗

PubMed2003

Enterobacterial adhesins and the case for studying SNPs in bacteria.

Single-nucleotide polymorphisms (SNPs) in structural genes can have a dramatic effect on the biology of whole organisms, from bacteria and viruses to mammals. Here, we underscore the importance of SNPs in bacterial genes that contribute to the ability of pathogens to cause disease. SNPs that confer an adaptive advantage for bacterial pathogens have been discovered in the genes encoding the FimH and Dr adhesins of Escherichia coli and, most recently, Salmonella enterica sv. Typhimurium FimH.

Adhesins, Bacterial↗

PubMed2002

Bacterial adhesion to target cells enhanced by shear force.

Surface adhesion of bacteria generally occurs in the presence of shear stress, and the lifetime of receptor bonds is expected to be shortened in the presence of external force. However, by using Escherichia coli expressing the lectin-like adhesin FimH and guinea pig erythrocytes in flow chamber experiments, we show that bacterial attachment to target cells switches from loose to firm upon a 10-fold increase in shear stress applied. Steered molecular dynamics simulations of tertiary structure of the FimH receptor binding domain and subsequent site-directed mutagenesis studies indicate that shear-enhancement of the FimH-receptor interactions involves extension of the interdomain linker chain under mechanical force. The ability of FimH to function as a force sensor provides a molecular mechanism for discrimination between surface-exposed and soluble receptor molecules.

Adhesins, Bacterial↗

PubMed2002

Identification of amino acids in the Dr adhesin required for binding to decay-accelerating factor.

Members of the Dr family of adhesins of Escherichia coli recognize as a receptor the Dr(a) blood-group antigen present on the complement regulatory and signalling molecule, decay-accelerating factor (DAF). One member of this family, the Dr haemagglutinin, also binds to a second receptor, type IV collagen. Structure/function information regarding these adhesins has been limited and domains directly involved in the interaction with DAF have not been determined. We devised a strategy to identify amino acids in the Dr haemagglutinin that are specifically involved in the interaction with DAF. The gene encoding the adhesive subunit, draE, was subjected to random mutagenesis and used to complement a strain defective for its expression. The resulting mutants were enriched and screened to obtain those that do not bind to DAF, but retain binding to type IV collagen. Individual amino acid changes at positions 10, 63, 65, 75, 77, 79 and 131 of the mature DraE sequence significantly reduced the ability of the DraE adhesin to bind DAF, but not collagen. Over half of the mutants obtained had substitutions within amino acids 63-81. Analysis of predicted structures of DraE suggest that these proximal residues may cluster to form a binding domain for DAF.

Adhesins, Bacterial↗

PubMed2002

The major structural subunits of Dr and F1845 fimbriae are adhesins.

Fimbrial adhesins mediate the attachment of pathogenic Escherichia coli to various host tissues leading to the development of disease. The Dr hemagglutinin and F1845 fimbriae belong to the Dr family of adhesins, which is associated with urinary tract infections and diarrheal disease. These adhesins bind to the Dr(a) blood-group antigen present on decay-accelerating factor (DAF). The Dr hemagglutinin is unique in this family since it also binds to type IV collagen and its binding is inhibited by the presence of chloramphenicol. We have purified the major structural subunits of Dr and F1845 fimbriae, DraE and DaaE, as fusions to maltose-binding protein and to oligohistidine tags and examined their binding to erythrocytes, Chinese hamster ovary cell transfectants expressing DAF, and a DAF fusion protein. The DraE and DaaE fusion proteins bind to the DAF receptor in a specific manner resembling the distinct phenotypes of the corresponding Dr and F1845 fimbriae. In contrast to binding studies with the DAF receptor, the DraE fusion proteins did not bind to type IV collagen.

Adhesins, Escherichia coli↗