Search PubMed⌕ Search

Biomedical subjects

Eugenii Katz

Publications and source records attributed to Eugenii Katz.

At least 19 recordsLinked to original sources
PubMed2006

Photochemically controlled electrochemical deposition and dissolution of Ag0 nanoclusters on au electrode surfaces.

A photoisomerizable thiolated nitrospiropyran SP, (1a), monolayer is assembled on a Au electrode by the primary deposition of thiolated nitromerocyanine isomer 1b as a monolayer on the electrode, followed by the irradiation of the surface with visible light, lambda > 475 nm. The surface coverage of nitrospiropyran units (1a) on the electrode is 2 x 10-10 mole cm-2. Irradiation of the electrode with UV light, 320 nm < lambda < 360 nm, results in the nitromerocyanine, MR, monolayer on the electrode that binds Ag+ ions to the phenolate units. The Ag+ ions associated with the MR monolayer undergo cyclic reduction to surface-confined Ag0 nanoclusters, and reoxidation and dissolution of the Ag0 nanoclusters to Ag+ ions associated with the monolayer are demonstrated. The electron-transfer rate constants for the reduction of Ag+ to Ag0 and for the dissolution of Ag0 were determined by chronoamperometry and correspond to ketred = 12.7 s-1 and ketox = 10.5 s-1, respectively. The nanoclustering rate was characterized by surface plasmon resonance measurements, and it proceeds on a time scale of 10 min. The size of the Ag0 nanoclusters is in the range of 2 to 20 nm. The electrochemically induced reduction of the MR-Ag+ monolayer to the MR-Ag0 surface and the reoxidation of the MR-Ag0 surface control the hydrophilic-hydrophobic properties of the surface. The advancing contact angle of the MR-Ag0-functionalized surface is 59 degrees , and the contact angle of the MR-Ag+-monolayer-functionalized surface is 74 degrees . Photoisomerization of the Ag0-MR surface to the Ag0-SP state, followed by the oxidation of the Ag0 nanoclusters, results in the dissolution of the Ag+ ions into the electrolyte solution.

Electrochemistry↗
PubMed2006

Cyclic control of the surface properties of a monolayer-functionalized electrode by the electrochemical generation of Hg nanoclusters.

Hg(2+) ions are bound to a 1,4-benzenedimethanethiol (BDMT) monolayer assembled on a Au electrode. Electrochemical reduction of the Hg(2+)-BDMT monolayer to Hg(+)-BDMT (at E degrees =0.48 V) and subsequently to Hg(0)-BDMT (at E degrees =0.2 V) proceeds with electron-transfer rate constants of 8 and 11 s(-1), respectively. The Hg(0) atoms cluster into aggregates that exhibit dimensions of 30 nm to 2 microm, within a time interval of minutes. Electrochemical oxidation of the nanoclusters to Hg(+) and further oxidation to Hg(2+) ions proceeds with electron-transfer rate constants corresponding to 9 and 43 s(-1), respectively, and the redistribution of Hg(2+) on the thiolated monolayer occurs within approximately 15 s. The reduction of the Hg(2+) ions to the Hg(0) nanoclusters and their reverse electrochemical oxidation proceed without the dissolution of mercury species to the electrolyte, implying high affinities of Hg(2+), Hg(+), and Hg(0) to the thiolated monolayer. The electrochemical transformation of the Hg(2+)-thiolated monolayer to the Hg(0)-nanocluster-functionalized monolayer is characterized by electrochemical means, surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact-angle measurements. The Hg(0)-nanocluster-modified surface reveals enhanced hydrophobicity (contact angle 76 degrees ) as compared to the Hg(2+)-thiolated monolayer (contact angle 57 degrees ). The hydrophobic properties of the Hg(0)-nanocluster-modified electrode are further supported by force measurements employing a hydrophobically modified AFM tip.

Journal Article↗
PubMed2006

Proteins modified with DNAzymes or aptamers act as biosensors or biosensor labels.

Hybrid systems composed of a glucose oxidase (GOx)/peroxidase-mimicking DNAzyme, and of microperoxidase-11 (MP-11)/anti-thrombin aptamer were synthesized. The hybrid systems were employed as amplifying labels for the colorimetric or chemiluminescence detection of an enzyme functions, and thrombin analysis, respectively. In the GOx/DNAzyme system, the GOx-mediated oxidation of glucose led to the formation of H(2)O(2), and this activated the oxidation of ABTS to a colored product, or to the generation of chemiluminescence in the presence of luminol. The MP-11/anti-thrombin aptamer enabled the amplified analysis of thrombin by the MP-11-mediated generation of chemiluminescence in the presence of luminol/H(2)O(2).

Aptamers, Nucleotide↗
PubMed2006

Concatenated logic gates using four coupled biocatalysts operating in series.

The assembly of three concatenated enzyme-based logic gates consisting of OR, AND, XOR is described. Four biocatalysts, acetylcholine esterase, choline oxidase, microperoxidase-11, and the NAD+-dependent glucose dehydrogenase, are used to assemble the gates. Four inputs that include acetylcholine, butyrylcholine, O2, and glucose are used to drive the concatenated-gates system. The cofactor NAD+, and its reduced 1,4-dihydro form, NADH, are used as a reporter couple, and these provide an optical output for the gates. The modulus of the absorbance changes of NADH is used as a readout signal.

Acetylcholinesterase↗
PubMed2006

Electrical contacting of redox proteins by nanotechnological means.

Redox enzymes in bioelectronic devices usually lack direct electrical contact with electrodes, owing to the spatial separation of their redox centers from the conductive surfaces by the protein shells. The reconstitution of apo-enzymes on cofactor-functionalized nanostructures associated with electrodes provides a means to align the biocatalysts on the conductive surface and to electrically contact redox enzymes with electrodes. The reconstitution of apo-enzymes on cofactor-functionalized gold nanoparticles or carbon nanotubes has led to effective electrical communication between the redox proteins and the electrodes. Alternatively, the reconstitution of redox enzymes on molecular wires that enable electron tunneling or dynamic charge shuttling represent supramolecular biocatalytic nanostructures exhibiting electrical contact. The bioelectrocatalytic activities of the electrically wired reconstituted enzymes on electrodes have allowed the development of amperometric biosensors and biofuel cell elements.

Biosensing Techniques↗
PubMed2006

Logic gates and elementary computing by enzymes.

Different selected enzymes, glucose oxidase (GOx), catalase (Cat), glucose dehydrogenase (GDH), horseradish peroxidase (HRP), and formaldehyde dehydrogenase (FDH), are used alone or coupled to construct eight different logic gates. The added substrates for the respective enzymes, glucose and H(2)O(2), act as the gate inputs, while the biocatalytically generated gluconic acid or NADH are the output signals that follow the operation of the gates. Different enzyme-based gates are XOR, INHIBIT A, INHIBIT B, AND, OR, NOR, Identity and Inverter gates. By combining the AND and XOR or the XOR and INHIBIT A gates, the half-adder and half-subtractor are constructed, respectively, opening the way to elementary computing by the use of enzymes.

Animals↗
PubMed2006

Biomolecule-nanoparticle hybrid systems for bioelectronic applications.

Recent advances in nanobiotechnology involve the use of biomolecule-nanoparticle (NP) hybrid systems for bioelectronic applications. This is exemplified by the electrical contacting of redox enzymes by means of Au-NPs. The enzymes, glucose oxidase, GOx, and glucose dehydrogenase, GDH, are electrically contacted with the electrodes by the reconstitution of the corresponding apo-proteins on flavin adenine dinucleotide (FAD) or pyrroloquinoline quinone (PQQ)-functionalized Au-NPs (1.4 nm) associated with electrodes, respectively. Similarly, Au-NPs integrated into polyaniline in a micro-rod configuration associated with electrodes provides a high surface area matrix with superior charge transport properties for the effective electrical contacting of GOx with the electrode. A different application of biomolecule-Au-NP hybrids for bioelectronics involves the use of Au-NPs as carriers for a nucleic acid that is composed of hemin/G-quadruplex DNAzyme units and a detecting segment complementary to the analyte DNA. The functionalized Au-NPs are employed for the amplified DNA detection, and for the analysis of telomerase activity in cancer cells, using chemiluminescence as a readout signal. Biomolecule-semiconductor NP hybrid systems are used for the development of photoelectrochemical sensors and optoelectronic systems. A hybrid system consisting of acetylcholine esterase (AChE)/CdS-NPs is immobilized in a monolayer configuration on an electrode. The photocurrent generated by the system in the presence of thioacetylcholine as substrate provides a means to probe the AChE activity. The blocking of the photocurrent by 1,5-bis(4-allyldimethyl ammonium phenyl)pentane-3-one dibromide as nerve gas analog enables the photoelectrochemical analysis of AChE inhibitors. Also, the association CdS-NP/double-stranded DNA hybrid systems with a Au-electrode, and the intercalation of methylene blue into the double-stranded DNA, generates an organized nanostructure of switchable photoelectrochemical functions. Electrochemical reduction of the intercalator to the leuco form, -0.4 V vs. SCE, results in a cathodic photocurrent as a result of the transfer of photoexcited conduction-band electrons to O(2) and the transport of electrons to the valance-band holes by the reduced intercalator units. The oxidation of the intercalator, E 0 V (vs. SCE), yields in the presence of triethanolamine, TEOA, as sacrificial electron donor, an anodic photocurrent by the transport of conduction-band electrons, through intercalator units, to the electrodes, and filling the valance-band holes with electrons supplied by TEOA. The systems reveal potential-switchable directions of the photocurrents, and reveal logic gate functions.

Animals↗
PubMed2006

Two coupled enzymes perform in parallel the 'AND' and 'InhibAND' logic gate operations.

The coupled activation of two enzymes: glucose dehydrogenase (GDH) and horseradish peroxidase (HRP), is used to construct the parallel-operating AND and InhibAND logic gates. The added substrates for the respective enzymes, glucose and H(2)O(2), act as the gate inputs, while the biocatalytically generated NADH and gluconic acid provide the output signals that follow the operations of the gates. The two gates are generated in the same vial, thus allowing the logic operations to take place in parallel, and the simultaneous readout of the functions of the gates.

Glucose 1-Dehydrogenase↗
PubMed2006

Controlling chemical reactivity at solid-solution interfaces by means of hydrophobic magnetic nanoparticles.

Hydrophobic magnetic nanoparticles are employed to reversibly regulate the hydrophobic/hydrophilic properties of surfaces and to control the electrochemistry and bioelectochemistry at chemically modified electrodes. Selective bioelectrocatalytic transformations at relay-functionalized electrodes are accomplished by the magnetic attractions of the hydrophobic magnetic nanoparticles with coadsorbed hydrophobic redox relays to the electrode. The selective activation of one of two biocatalysts solubilized in the aqueous electrolyte solution in the absence or presence of hydrophobic magnetic nanoparticles results in the specific activation of bioelectrocatalytic processes. The magnetic attraction and retraction of hydrophobic magnetic nanoparticles to and from semiconductor nanoparticle (CdS)-functionalized electrodes enable the control of the photocurrent directions at the electrode from cathodic to anodic directions, respectively. The magnetic attraction of the hydrophobic magnetic nanoparticles to the surfaces is also employed to control biorecognition and biocatalytic transformations at solid supports. The magnetic attraction and retraction of the hydrophobic magnetic nanoparticles to and from the surfaces allow the blockage and activation of DNA hybridization, polymerization, and enzymatic digestion, respectively.

Electrochemistry↗
PubMed2006

Switchable surface properties through the electrochemical or biocatalytic generation of Ag0 nanoclusters on monolayer-functionalized electrodes.

The electroswitchable and the biocatalytic/electrochemical switchable interfacial properties of a Ag(+)-biphenyldithiol (BPDT) monolayer associated with a Au surface are described. Upon the application of a potential corresponding to -0.2 V the Ag(+)-BPDT is reduced to the Ag(0)-BPDT interface, and silver nanoclusters are generated on the interface. The application of a potential that corresponds to 0.2 V reoxidizes the monolayer to the Ag(+)-BPDT monolayer. The reversible electrochemical transformation of the Ag(+)-BPDT monolayer and of the Ag(0)-BPDT surface was followed by electrochemical means and surface plasmon resonance spectroscopy (SPR). The SPR experiments enabled us to follow the kinetics of nanoclustering of Ag(0) on the surface. The hydrophobic/hydrophilic properties of the surface are controlled by the electrochemically induced transformation of the interface between the Ag(+)-BPDT and Ag(0)-BPDT states. The Ag(0)-BPDT monolayer reveals enhanced hydrophilicity. The hydrophobic/hydrophilic properties of the interface were probed by contact angle measurements and force interactions with a hydrophobically-functionalized AFM tip. The Ag(0)-BPDT interface was also biocatalytically generated using alkaline phosphatase, AlkPh, and p-aminophenyl phosphate as substrate. The biocatalytically generated p-aminophenol reduces Ag(+) ions associated with the surface to Ag(0) nanoclusters. This enables the cyclic biocatalytic/electrochemical control of the surface properties of the modified electrode.

Alkaline Phosphatase↗
PubMed2005

Temperature-dependent and friction-controlled electrochemically induced shuttling along molecular strings associated with electrodes.

The temperature and solvent composition dependence of the electrochemically stimulated rate of shuttling of the redox-active cyclophane, cyclobis(paraquat-p-phenylene), on a molecular string has been studied. The molecular string includes a pi-donor diiminebenzene-site that is associated on one side with an electrode, and stoppered on the other side with an adamantane unit. The cyclophane rests on the pi-donor site, owing to stabilizing pi-donor-acceptor interactions. Electrochemical reduction of the cyclophane units, to the bis-radical cation cyclophane, results in the shuttling of the reduced cyclophane towards the electrode, a process that is driven by the removal of the stabilizing donor-acceptor interactions, and the electrostatic attraction of the reduced product by the electrode. The latter process is energetically downhill, and is temperature-independent. Upon oxidation of the reduced cyclophane that is associated with the electrode, the energetically uphill shuttling of the oxidized cyclophane to the pi-donor site proceeds. The rate of this translocation process has been found to be temperature-dependent, and controlled by the solvent composition. The experimental results have been theoretically analyzed in terms of Kramers' molecular friction model. The theoretical fitting of the experimental results, using solutions of variable composition, reveals that the rate-constants for the uphill reaction in a pure aqueous solution follow the temperature-dependence of the viscosity of water. The results demonstrate the significance of friction phenomena in shuttling processes within molecular machines.

Journal Article↗
PubMed2005

Reconstitution of apo-glucose dehydrogenase on pyrroloquinoline quinone-functionalized au nanoparticles yields an electrically contacted biocatalyst.

An electrically contacted glucose dehydrogenase (GDH) enzyme electrode is fabricated by the reconstitution of the apo-GDH on pyrroloquinoline quinone (PQQ)-functionalized Au nanoparticles (Au-NPs), 1.4 nm, associated with a Au electrode. The Au-NPs functionalized with a single amine group were attached to the Au surface by 1,4-benzenedithiol bridges, and PQQ was covalently linked to the Au-NPs. The apo-GDH was then reconstituted on the PQQ cofactor sites. The surface coverage of GDH corresponded to 1.4 x 10(-12) mol cm(-2). The reconstituted enzyme revealed direct electrical contact with the electrode surface, and the bioelectrocatalytic oxidation of glucose occurred with a turnover number of 11,800 s(-1). In contrast, a system that included the covalent attachment of GDH to the PQQ-Au-NPs monolayer in a random, nonaligned, configuration revealed lack of electrical communication between the enzyme and the electrode, albeit the enzyme existed in a bioactive structure. The bioelectrocatalytic function of the later system was, however, activated by the diffusional electron mediator 2,6-dichlorophenol-indophenol. The results imply that the alignment of GDH on a Au-NP through the reconstitution process leads to an electrically contacted enzyme-electrode, where the Au-NP acts as a charge-transfer mediator.

2,6-Dichloroindophenol↗