Biomedical subjects

Ernst Kenndler

Publications and source records attributed to Ernst Kenndler.

At least 55 records · Page 3Linked to original sources

PubMed2004

Characterisation and identification of proteinaceous binding media (animal glues) from their amino acid profile by capillary zone electrophoresis.

A capillary electrophoretic method for identifying different species of proteinaceous binders--collagen, egg white, and milk casein--is described. It allows characterisation of the proteins on the basis of the amino acid profiles obtained after their acidic hydrolysis. The profiles of the underivatised amino acids are recorded directly by capillary zone electrophoresis at pH 2.26 with the aid of a conductivity detector, thus eliminating the need for a derivatisation step. Identification is carried out by means of different relative peak areas of the amino acids. A scheme is given for identification, which is based on the main markers, hydroxyproline, proline, glycine, glutamic acid, and serine and valine.

Journal Article↗

PubMed2003

Relation between retention factors of immunosuppressive drugs in microemulsion electrokinetic chromatography with biosurfactants and octanol-water partition coefficients.

Retention (capacity) factors (k' values) of immunosuppressive drugs were determined in microemulsion electrokinetic chromatography (MEEKC) systems as a tool for the indirect estimation of partition coefficients (POW) between 1-octanol and water. The microemulsions were based on phosphatidylcholine (PC) and bile acids (BAs) as biosurfactants and isopropyl myristate (IPM) as oil. Immunosuppressants were azathioprine (AZA), mycophenolate mofetil (MMF), tacrolimus (FK506) and cyclosporine A (CyA). Capacity factors of the analytes were determined from electrophoretic mobilities using an aqueous phosphate buffer (20 mM; pH 7.5) for all the systems. Retention was compared with that in the most commonly used microemulsion based on sodium dodecyl sulphate (SDS). logPOW versus logk' calibration lines were constructed using reference compounds with known POW. In addition, data of logPOW of the immunosuppressants were determined by partitioning between octanol and water, and were calculated by the aid of computer program. A different sequence of logPOW for two analytes was found in the biosurfactant-based systems compared with the SDS-containing one. Excellent agreement was observed between the logPOW values derived from the microemulsions containing deoxycholate compared with the data determined by partitioning between octanol and water. It was concluded that the retention factors in the systems with biosurfactants are good estimators for the partitioning in biological systems.

Chromatography, Ion Exchange↗

PubMed2003

Medium effect (transfer activity coefficient) of methanol and acetonitrile on beta-cyclodextrin/benzoate complexation in capillary zone electrophoresis.

Association constants, Kc, were derived from the electrophoretic mobilities of the anionic solutes (seven benzoates with hydroxy or chloro substituents) by capillary zone electrophoresis in different solvent systems, consisting of binary mixtures of water with up to 20% (v/v) methanol or acetonitrile, respectively. The association constants expectedly are found to decrease with increasing organic solvent concentration. The effect of organic solvents on the Kc of the benzoates with beta-cyclodextrin was analyzed applying the concept of the transfer activity coefficient (or the medium effect). This concept enables the evaluation of the significance of the contributions of the individual species involved in the complexation equilibrium in the different solvents: the benzoate ion, beta-cyclodextrin, and the anionic benzoate-beta-cyclodextrin complex. The medium effect on benzoate was calculated from the change in acidity constant of benzoic acid in the different mixed solvents and the corresponding transfer activity coefficients of the proton and the molecular acid. The transfer activity coefficients for beta-cyclodextrin results from its solubility at saturation in the different solvents. In this way, an estimation of the standard free energy of transfer, deltaG(t)0, of each species involved in the complexation equilibrium was possible for the transfer from water into the respective mixed solvent. It was found that the organic solvents do not significantly affect deltaG(t)0 for the benzoate anion. However, the organic solvents play a different role concerning the stabilization of beta-cyclodextrin and the complex anion: whereas the addition of acetonitrile has nearly no influence on deltaG(t)0 of the anionic complex, the reduction in Kc is caused by the enhanced stabilization of beta-cyclodextrin (reflected by its better solubility). Addition of methanol, on the other hand, lowers the solubility of beta-cyclodextrin, thus giving positive values for deltaG(t)0. Thus, the overall effect on Kc in methanolic solutions must be related to the pronounced destabilization of the benzoate-beta-cyclodextrin complex.

Acetonitriles↗

PubMed2003

Determination of ethoxylated bisphenol A dimethacrylate monomers in dental composites by micellar electrokinetic chromatography.

Separation of monomeric constituents of ethoxylated bisphenol A (BIS-EMA) with between 2 and 15 ethoxy groups per phenol in the molecule was investigated with micellar electrokinetic chromatography at different volume percentages methanol in the background electrolyte (10 mM sodium dodecylsulfate, 100 mM borate-50 mM phosphate buffer, pH 7.0). The conditions allowed the differentiation of the lower from the higher BIS-EMA homologues and of isomers, and enabled the characterisation of commercial dental composite materials. The decay curve for the light induced radical polymerisation of BIS-EMA in composite specimens was determined. The content of leachable monomers after light curing was quantified, resulting in 6% of the initial value after the recommended curing time. The method is suited to determine monomer constituents in polymerised composite material in the ppm range.

Acrylic Resins↗

PubMed2003

Quantitation of oxcarbazepine and its metabolites in human plasma by micellar electrokinetic chromatography.

A reliable micellar electrokinetic chromatographic method for the determination of oxcarbazepine and its two main metabolites, 10-hydroxycarbamazepine and 10,11-trans-dihydroxy-10,11-dihydroxycarbamazepine, in human plasma was developed. The separation and determination of the analytes was achieved using a system consisting of 60 mM SDS in phosphate buffer (30 mM, pH 8.0), to which 20% (v/v) methanol was added. Separation was carried out in an uncoated fused-silica capillary with a separation voltage of 25 kV and currents typically less than 40 microA. Spectrophotometric detection was at 205 nm. Isolation of oxcarbazepine and its metabolites from plasma was accomplished by a solid-phase extraction procedure. The mean extraction yield of the analytes from plasma was higher than 94%. The linear correlation coefficients were better than 0.994 for all analytes. The limit of detection was 0.05 microg/mL, the limit of quantitation 0.15 microg/mL. The repeatability for the spiked blank plasma samples was lower than 1.9% and the intermediate precision lower than 2.1%, both expressed as RSD%. The results obtained analysing real plasma samples from epileptic patients under therapy with Tolep were satisfactory in terms of precision, accuracy and detectability.

Anticonvulsants↗

PubMed2003

The principles of migration and dispersion in capillary zone electrophoresis in nonaqueous solvents.

Nonaqueous solvents are interesting media for capillary zone electrophoresis as they can affect all relevant parameters governing the separation of sample zones. However, for a rational planning of the working conditions and an appropriate interpretation of the results obtained, the basic principles of ion migration and zone dispersion must be understood. Many solvent induced effects need to be carefully considered and recognized before full exploitation of nonaqueous solvents can take place. It is the goal of this overview to present the fundamental physicochemical aspects of capillary zone electrophoresis in nonaqueous solvent systems. Therefore, the detailed discussion is related to the effect of organic solvents on electrophoretic mobilities (based on the theory of conductance), acid-base dissociation behavior (based on the transfer activity coefficient and medium effect), pH, separation efficiency (with regard to mobility and diffusion coefficient in dilute solutions), resolution, and electroosmotic flow.

Electrophoresis, Capillary↗

PubMed2003

Comparison of different algorithms to calculate electrophoretic mobility of analytes as a function of binary solvent composition.

Ten different mathematical models representing the electrophoretic mobility of analytes in capillary electrophoresis in mixed solvents of different composition have been compared using 32 experimental data sets. The solvents are binary mixtures of water-methanol, water-ethanol and methanol-ethanol, respectively. Mean percentage deviation (MPD), overall MPD (OMPD) and individual percentage deviation (IPD) have been considered as comparison criteria. The results showed that a reorganized solution model, namely the combined nearly ideal binary solvent/Redlich-Kister equation, is the most accurate model among other similar models concerning both correlation ability and prediction capability.

Algorithms↗

PubMed2003

Influence of solvent on temperature and thermal peak broadening in capillary zone electrophoresis.

The present paper deals with the role of the solvent on thermal peak broadening. One main solvent property that determines the magnitude of the temperature gradient due to the generation of Joule heat in capillary zone electrophoresis is the thermal conductivity. As organic solvents have lower thermal conductivity than water (methanol and acetonitrile, e.g., nearly by a factor of 3) it can be hypothesized that the temperature gradient inside the capillary is more pronounced in organic solvents compared to an aqueous solution. On the other hand, the temperature dependence of the ion mobility (which is responsible for the velocity profile and thus for thermal peak broadening) is smaller in organic solvents. To get insight into the thermal effect of the solvent, first the temperature of a solution in a cylindrical tube was calculated utilizing the heat balance equation. It was shown that the two theoretical models most common in the literature (based on the analytical solution or on an assumption of the parabolic temperature profile in the tube, respectively) give the same results. The latter model was chosen for the further calculations, adding a quadratic term to express the electric conductivity as a function of the temperature. The temperature at the inner capillary wall and center as function of the capillary dimensions and the electric power was computed for electrolytes with a given conductivity at 25.0 degrees C with water, methanol, and acetonitrile as solvents. Capillary cooling systems used were circulating liquid cooling, enforced air-cooling, and natural convection in still air. The mean temperature (averaged over the cross section) resulting from Joule heating was compared with experimentally determined temperatures established upon application of an electric field; the latter temperature was derived from the measurement of the electric conductance of the background electrolyte solution and its (measured) temperature dependence. All investigations were carried out with solutions of the same initial electric conductivity (about 0.5 S.m(-1) at 25.0 degrees C). Agreement is found for natural convection conditions, and the deviation between theoretical and experimental results for the forced air and circulated liquid cooling systems can be related to the poorly defined thermal conditions of the capillaries in commercial instrumentation (with a part in a thermostated cassette and a part outside). For given conditions the temperature gradients in the organic solvents exceed largely those in water, independent of the type of cooling. As a consequence, the thermal plate height is significantly larger in organic solvents, at least under conditions where the deviation from the Nernst-Einstein limiting case is not too high. However, even for the maximum applicable field strengths the thermal plate height contributions are negligible compared to longitudinal diffusion in all solvents.

Electrophoresis, Capillary↗

PubMed2003

Recent developments in capillary electrokinetic chromatography with replaceable charged pseudostationary phases or additives.

Although electrochromatography in packed beds or monolithic columns has gained enormous interest, techniques based on charged pseudostationary phases like micelles are of high practical importance in electrically driven separation science. However, nonmicellar alternatives, e.g., using charged soluble polymers or smaller additives are still attractive, as they allow high concentrations of organic solvents, and their application is not limited by the critical micellar concentration. This review discusses the developments in the field of electrokinetic chromatography with these additives in the last three years, covering ionic polymeric pseudostationary phases, dendrimers and so-called micelle polymers, but also small molecules which implement separation selectivity due to their specific interaction with the analytes.

Acrylates↗

PubMed2003

Characterization of pharmaceutical drugs by a modified nonaqueous capillary electrophoresis--mass spectrometry method.

A simple method for the separation and characterization of a group of nine basic compounds, comprising seven tricyclic antidepressant and two bronchodilator drugs, by nonaqueous capillary electrophoresis (NACE) employing ultraviolet and mass spectrometry detection is described. After optimization of the electrophoresis separation conditions, including the compositions of the electrolyte and the organic solvent, a reliable separation of all nine basic analytes was achieved in 80 mM ammonium formate dissolved in a methanol-acetonitrite (80:20 v/v) mixture, having an apparent pH of 8.7. The volatile nonaqueous electrolyte system used with a normal electroosmotic flow polarity also provided an optimal separation condition for the characterization of the analytes by mass spectrometry. When results were compared with reversed-phase gradient and isocratic high-performance liquid chromatography (HPLC) methods, the NACE method provided greater efficiency, achieving baseline resolution for all nine basic compounds in less than 30 min. The NACE method is suitable for use as a routine procedure for the rapid separation and characterization of basic compounds and is a viable alternative to HPLC for the separation of a wide range of pharmaceutical drugs.

Antidepressive Agents, Tricyclic↗

PubMed2003

Estimation and comparison of zeta-potentials of silica-based anion-exchange type porous particles for capillary electrochromatography from electrophoretic and electroosmotic mobility.

Mobilities of different chromatographic particles obtained from two electrokinetic methods were determined and compared. The particles were all based on porous silica, between 3 and 15 microm diameter, and were either native, or derivatized. As intermediate of chemical modification 3-mercaptopropyl-modified silica particles (TP-silica) are obtained. These particles were finally transformed into weakly basic anion exchangers with O-9-(tert-butylcarbamoyl)quinine (tBuCQN) as chiral selector. The electrophoretic mobility of the particles was determined from their migration velocity in an electric field using microelectrophoresis. Electrokinetic chromatography with a capillary column packed with the same particles was used to measure the electroosmotic flow generated. All measurements were carried out in background electrolytes of equal ionic strength (10(-2) mol/L), at pH varying between 3.5 and 9.5. From these data a rough estimation of the zeta-potential was made, taking Helmholtz-Smoluchowski conditions into consideration. With both methods the zeta-potential of the native silica particles is negative throughout, and its value increases with pH. The weakly basic tBuCQN particles have positive zeta-potentials at pH lower than about 7.5, but exhibit a negative zeta-potential above this pH, indicating the dominating effect of residual silanol groups at the silica surface. The zeta-potential for these anion-exchange particles ranged between +30 and -40 mV. The zeta-potentials derived with electrophoresis and electroosmosis agree, showing the adequacy of the approach, although many limitations must be taken into account in the treatment of the electrokinetic phenomena in such porous systems. These restrictions in interpreting mobility and zeta-potential were discussed.

Anion Exchange Resins↗

PubMed2003

Comparison of the retention characteristics of different pseudostationary phases for microemulsion and micellar electrokinetic chromatography of betamethasone and derivatives.

Five electrokinetic chromatography systems were compared concerning retention behavior and lipophilicity. Comparison was based on capacity (retention) factors of some steroidal drugs, and on log P(OW) values derived by the aid of reference substances. In all systems the aqueous buffer consisted of phosphate (20 mM, pH 7.5). Two systems had micelles, three systems microdroplets as negatively charged pseudostationary phases. The micelles were formed by sodium dodecyl sulfate (SDS) and sodium cholate, respectively. One microemulsion consisted (as usual) from octane as oil, butanol as cosurfactant and SDS as charged tenside. Two microemulsions were made from biosurfactants (phosphatidylcholine, isopropylmyristate) to better simulate biopartitioning of the drugs. Even for noncharged analytes a change in migration sequence and thus in log P(OW) was observed for the systems consisting of the biosurfactants, compared to the others. For the former systems, log P(OW) derived from the capacity factors agree for all analytes with those obtained from calculation by computer software based on the structure of the drugs, and with experimental data directly obtained from octanol/water partitioning.

Betamethasone↗

PubMed2003

Microemulsion electrokinetic chromatography applied for separation of levetiracetam from other antiepileptic drugs in polypharmacy.

Microemulsion electrokinetic chromatography was applied for the separation of levetiracetam from other antiepileptic drugs (primidone, phenobarbital, phenytoin, lamotrigine and carbamazepine) that are potentially coadministered in therapy of patients. The influence of the composition of the microemulsion system (with sodium dodecyl sulfate as charged surfactant) was investigated, modifying the kind of cosurfactant (lower alcohols from C3 to C5), the pH (and salinity) of the aqueous background electrolyte, and the ratio of aqueous phase to organic constituents forming the microdroplets of the oil-in-water emulsion. Separation selectivity was depending on all these parameters, resulting even in changes of the migration sequence of the analytes. Only moderate correlation was observed for the microemulsion system compared with a micellar system, both consisting of the aqueous borate buffer (pH 9.2) and SDS as micelle former (linear correlation coefficient for analyte mobilities is 0.974). The sample solvent plays an important role on the shape of the resulting chromatograms: methanol at concentrations higher than 35% impairs peak shape and separation efficiency. The microemulsion method (with 93.76% aqueous borate buffer (pH 9.2, 10 mM), 0.48% n-octane, 1.80% SDS, 3.96% 1-butanol, all w/w) is suitable for the determination of levetiracetam in human plasma (combined with a sample pretreatment based on solid-phase extraction).

Anticonvulsants↗

PubMed2002

Determination of electroosmotic flow mobility with a pressure-mediated dual-ion technique for capillary electrophoresis with conductivity detection using organic solvents.

A method is described for the indirect determination of the mobility of the electroosmotic flow (EOF), which can be carried out within a few minutes even for very low mobilities. It is independent of the direction of the EOF. It is based on the comparison of the measured mobilities of two oppositely charged reference ions (tetraphenylphosphonium and tetraphenylborate) with given mobilities in different organic solvents (methanol, acetonitrile, N,N-dimethylformamide, N,N-dimethylacetamide, propylene carbonate) at ionic strengths between 5 and 50 mM. The method is based on the sequential movement of the reference ions in a three-step process: first by a laminar flow to a certain position in the separation capillary, followed by electromigration due to application of voltage, and pressurised migration towards the detector. In this way the total mobilities of the reference ions can be determined from their residence times, and the difference to their known actual mobilities gives the mobility of the EOF. The method avoids misinterpretations caused by system- and eigen-peaks, which often bias the results especially when a conductivity detector is used. The method is suitable for all solvents, and is an advantage especially for organic and mixed aqueous-organic background electrolytes with high UV absorbance.

Electric Conductivity↗

PubMed2002

Separation of carbamazepine and five metabolites, and analysis in human plasma by micellar electrokinetic capillary chromatography.

A rapid and feasible method was developed for the analysis of carbamazepine and its five metabolites (10,11-dihydro-10,11-epoxycarbamazepine, 10,11-dihydro-10,11-dihydroxycarbamazepine, 10,11-dihydro-10-hydroxycarbamazepine, 2-hydroxycarbamazepine and 3-hydroxycarbamazepine) in human plasma. Separation of the analytes is based on micellar electrokinetic chromatography, in untreated fused-silica capillary (48.5/40.0 cm length, 50 microm I.D.) with phosphate buffer (30 mM, pH 8.00) as background electrolyte, containing 50 mM sodium dodecylsulfate, and methanol (15%, v/v) as organic modifier. Clean up of human plasma samples was carried out by means of a solid-phase extraction procedure, which gave a high extraction yield for all six carbamazepines (>88%). The overall precision of the method gives a mean RSD of about 1.8%. The limit of quantitation for all analytes is < or = 0.30 microg ml(-1), the limit of detection < or = 0.12 microg ml(-1).

Anticonvulsants↗

PubMed2002

Analysis of dimeric cyanine-nucleic acid dyes by capillary zone electrophoresis in N,N-dimethylacetamide as non-aqueous organic solvent.

A method based on capillary zone electrophoresis is presented for the determination of the purity of commercial dimeric cyanine dyes (TOTO, YOYO, BOBO, all -1 and -3 species, LOLO-1, POPO-1) that are common as fluorescent probes for nucleic acid staining. These dyes are tetracharged cations, and have a strong tendency to interact with negatively charged centres, where they are rapidly adsorbed, especially from aqueous solutions. Thus anionic sites at the capillary wall must be avoided, and aqueous buffers are not suitable. The method introduced here avoids both complications, using non-aqueous N,N-dimethylacetamide as solvent, and suppressing the dissociation of silanol groups at the capillary surface due to selection of acidic separation conditions (20 mmol/l perchloric acid as background electrolyte). The present method enables the determination of the purity of all 10 dyes in less than 15 min. The selectivity of the method allows separation of at least five main and differentiating a number of unresolved minor contaminants as demonstrated in detail for TOTO-3 as an example. Quantitation (with 100% normalisation of the peak areas) of nine lots of this dye results in a purity between 33 and 87%.

Acetamides↗

PubMed2002

Propylene carbonate as a nonaqueous solvent for capillary electrophoresis: mobility and ionization constant of aliphatic amines.

The two properties of aliphatic amines were investigated in propylene carbonate as solvent that are decisive for capillary electrophoretic migration: the actual mobilities and the pKa* values. Solutes were eight primary, secondary, and tertiary amines. Roughly, the actual ionic mobilities of the ammonium ions are inversely proportional to the solvent viscosity, fairly obeying Walden's rule. The pKa* values of the cation acids, HB+ (the corresponding acids of the amines, B), were related to the conventional pH* scale of the buffers. Determined from the effective mobilities as a function of the pH*, they are increased by approximately 7 units compared to water. This increase was interpreted based on the concept of the standard free energy of transfer of the individual species in the acid-base equilibrium. The corresponding medium effect on the proton, log mgammaH+ (the logarithm of the transfer activity coefficient mgammaH+) is approximately +8. The medium effect on the free base, B, was obtained from solubility data; it is about -1 and smaller. Plausible values for the medium effect on the cation HB+ (-1 to -2) lead to a sum of the increments, which corresponds with the overall effect, expressed by the change in pKa*. Examination of the individual contributions shows that the drastically lower basicity of propylene carbonate compared to water is mainly responsible for the increase in pKa upon transfer of the acid-base equilibrium of aliphatic ammonium/amine from the aqueous to the organic solvent.

Amines↗

PubMed2002

The principle cause for lower plate numbers in capillary zone electrophoresis with most organic solvents.

With longitudinal diffusion as an unavoidable source of peak broadening, the peak efficiency (expressed by the plate number, N) in capillary zone electrophoresis depends on the ratio of electrophoretic mobility, mu, and tracer- or self-diffusion coefficient, D. Both parameters are functions of the ionic strength of the electrolyte solution. According to theory, the mobility is decreased with increasing ionic strength by the relaxation effect (depending on the relative permittivity) and the electrophoretic effect (depending on the relative permittivity and the viscosity of the solvent), whereas the diffusion coefficient is decreased only by the relaxation effect. This allows the theoretical predictions that the plate number, which is proportional to the ratio mu/D, decreases with increasing ionic strength and that the magnitude of this reduction depends on the solvent. Taking the values for relative permittivity and viscosity allows forecasting that, in general, water as a solvent exhibits the smallest lowering of the plate number, as compared to organic solvents. The theoretical predictions are confirmed by the data for the ratio calculated from measured mobilities and diffusion coefficients for iodide as the analyte ion in water, methanol, and acetonitrile with ionic strength of the background electrolyte varying between 0.005 and 0.080 mol L(-1). Whereas the experimentally observed plate number per volt is reduced from its "ultimate value" of about 20 (analyte charge number z = 1, zero ionic strength) in water by only 10%, the decrease at the same ionic strength in methanol and acetonitrile reaches 25 to 30%. Thus, the maximum plate number should read Nmax approximately equals 13 zU (with U being the effective voltage) for these solvents with ionic strengths normally applied in capillary electrophoresis. This reduction is not stemming from inappropriate experimental conditions, but has fundamental physicochemical causes.

Journal Article↗