Biomedical subjects

Erkki Lassila

Publications and source records attributed to Erkki Lassila.

3 recordsLinked to original sources

PubMed2006

Bright diode laser light source.

A simplified multiwavelength prototype of an axially symmetric diode laser device based on stacks made of single emitters has been made, and the performance of the device has been demonstrated experimentally. The results verify that kilowatt-level light power can be focused into a circular spot with a 1/e2 diameter of 360 microm, a focal length of 100 mm, and a numerical aperture of 0.24, thus producing an average power density in excess of 10 kW/mm2 and a brightness of 6x10(10) W m-2 sr-1. The experiments also predict that it will be possible to increase these values to more than 60 kW/mm2 and 3x10(11) W m-2 sr-1.

Journal Article↗

PubMed2004

Compact stacking of diode lasers for pulsed light sources of high brightness.

A compact stacking architecture for high-power diode-laser arrays is proposed and compared with traditional stacks. The objective of compact stacking is to achieve high brightness values without the use of microlenses. The calculated brightness for a compact stack is over 300 W mm(-2) sr(-1), which is approximately 40 times higher than that of a traditional stack made of similar laser emitters. Even higher brightness values of over 600 W mm(-2) sr(-1) were reached in practice. A laser head was manufactured in which the light from several compact laser stacks could be fiber coupled or the light could be transformed to a highly uniform beam.

Journal Article↗

PubMed2004

High power density beam from narrow diode-laser arrays in axial symmetry.

A multiplexing method based on narrow diode-laser arrays (DLAs) in an axially symmetric configuration is described. The use of submillimeter narrow DLAs improves beam quality considerably in the slow-axis direction compared with typical 1-cm-wide DLAs. The axially symmetric geometry is advantageous for efficient spatial, wavelength, and polarization multiplexing. With narrow DLAs and an axially symmetric geometry, a small circular focus with more than 10-kW/mm2 average power density is possible. Theoretical calculations and preliminary experimental results are presented.

Journal Article↗