Search PubMed⌕ Search

Biomedical subjects

Eric Clot

Publications and source records attributed to Eric Clot.

8 recordsLinked to original sources
PubMed2005

Well-defined imidotitanium alkyl cations: agostic interactions, migratory insertion vs.[2+2] cycloaddition, and the first structurally authenticated AlMe(3) adduct of any transition metal alkyl cation.

The imidotitanium alkyl cations [Ti(NtBu)(Me3[9]aneN3)R]+ (R = Me (3+) or CH2SiMe3(4+)) possess either a very weak alpha-agostic or beta-Si-C agostic interactions, respectively, according to 13C and 29Si NMR and DFT studies; reaction of (4+) with iPrNCNiPr gives totally selective insertion into the Ti-alkyl bond; reaction of 3+ with AlMe3 gives the first structurally characterised AlMe3 adduct of a transition metal alkyl cation (Me3[9]aneN3 = 1,4,7-trimethyltriazacyclononane).

Journal Article↗
PubMed2004

Is the allylpalladium structure altered between solid and solutions?

Recent EXAFS measurements on [(Ph(2)PCH(2)CH(2)PPh(2))Pd(H(2)CCHCMe(2))]O(3)SCF(3) (Tromp et al. J. Am. Chem. Soc. 2002, 124, 14814) were interpreted as evidence that, when the complex is dissolved in THF, the allyl ligand adopts an eta(2) structure with a dangling allyl CH(2) substituent. DFT calculations of the Pd complex using H(2)P-CH(2)CH(2)-PH(2) as a model for Ph(2)P-CH(2)CH(2)-PPh(2) (dppe), in the absence or the presence of the triflate counteranion, and modeling the THF solvent by explicit Me(2)O molecules or by a continuum model give always a conventional eta(3)-H(2)CCHCMe(2) structure with equal Pd-C bonds to the terminal carbon centers of the allyl. QM/MM calculations using the dppe ligand also fail to support an eta(2)-allyl structure as a global minimum. The EXAFS parameter space is shown to have multiple minima. These have very similar overall EXAFS, but have very different structural parameters. The minimum that was the basis for the previous structural conclusion gives a slightly better fit but has unrealistic Debye-Waller factors and threshold energies.

Alkenes↗
PubMed2004

Double geminal C-H activation and reversible alpha-elimination in 2-aminopyridine iridium(III) complexes: the role of hydrides and solvent in flattening the free energy surface.

[H2Ir(OCMe2)2L2]BF4 (1) (L = PPh3), a preferred catalyst for tritiation of pharmaceuticals, reacts with model substrate 2-(dimethylamino)pyridine (py-NMe2; py = 2-pyridyl) to give chelate carbene [H2Ir(py-N(Me)CH=)L2]BF4 (2a) via cyclometalation, H2 loss, and reversible alpha-elimination. Agostic intermediate [H2Ir(py-N(Me)CH2-H)L2]BF4) (4a), seen by NMR, is predicted (DFT(B3PW91) computations) to give C-H oxidative addition to form the alkyl intermediate [(H)(eta2-H2)Ir(py-N(Me)CH2-)L2]BF4. Loss of H2 leads to the fully characterized alkyl [HIr(OCMe2)(py-N(Me)CH2-)L2]BF4 (3a(Me2CO)), which loses acetone to give alkylidene hydride 2a by rapid reversible alpha-elimination. 2a rapidly reacts with excess H2 in d6-acetone to generate [H2Ir(OC(CD3)2)2L2]BF4 (1-d12), 3a((CD3)2CO), and py-NMe2 in a 1:1:1 ratio, showing reversibility and accounting for the selective isotope exchange catalyzed by 1. Reaction of 1 with py-N(CH2)4 gives the fully characterized carbene 2c. A cis-L(2) carbene intermediate, cis-2c, observed by NMR, reacts with CO via retro alpha-elimination to give the alkyl 3cCO, while the trans isomer, 2c, does not react; retro alpha-elimination thus requires the Ir-H bond to be orthogonal to the carbene plane. Consistent with experiment, computational studies show a particularly flat PE surface with activation of the agostic C-H bond giving a less stable H2 complex, then formation of a kinetic carbene complex with cis-L, only seen experimentally for py-N(CH2)4. Hydrides at key positions, together with gain or loss of solvent and H2, flatten the PE (DeltaG) surfaces to allow fast catalysis.

Journal Article↗
PubMed2004

Defluorination of perfluoropropene using Cp*2ZrH2 and Cp2ZrHF: a mechanism investigation from a joint experimental-theoretical perspective.

Cp*(2)ZrH(2) (1) (Cp* = pentamethylcyclopentadienyl) reacts with perfluoropropene (2) to give Cp*(2)ZrHF (3) and hydrodefluorinated products under very mild conditions. Initial C-F bond activation occurs selectively at the vinylic terminal position of the olefin to exchange fluorine for hydrogen. Subsequent hydrodefluorination leads to the formation of the n-propylhydride complex Cp*(2)ZrH(CH(2)CH(2)CH(3)), which can be cleaved with dihydrogen to give propane and 1. A theoretical study of the reaction of Cp*(2)ZrH(2) (Cp* = cyclopentadienyl) and CF(2)[double bond]CF(CF(3)) has been undertaken. Several mechanisms have been examined in detail using DFT(B3PW91) calculations and are discussed for this H/F exchange: (a) internal olefin insertion/beta-fluoride elimination, (b) external olefin insertion/beta-fluoride elimination, and (c) F/H metathesis from either an inside or outside approach. Of these, the first case is found to be energetically preferred. Selective defluorination at the terminal carbon has been shown to be favored over defluorination at the substituted and allylic carbons.

Journal Article↗
PubMed2003

Biscarbene-ruthenium complexes in catalysis: novel stereoselective synthesis of (1E,3E)-1,4-disubstituted-1,3-dienes via head-to-head coupling of terminal alkynes and addition of carboxylic acids.

The reaction of a variety of alkynes RCtbd1;CH with a variety of carboxylic acids R(1)CO(2)H, in the presence of 5% of RuCl(COD)C(5)Me(5), selectively leads to the dienylesters (1E,3E)-RCH(1)=CH(2)-CH(3)=C(R)(O(2)CR(1)). The reaction also applies to amino acid and dicarboxylic acid derivatives. It is shown that the first step of the reaction consists of the head-to-head alkyne coupling and of the formation of the metallacyclic biscarbene-ruthenium complex isolated for R = Ph and catalyzing the formation of dienylester. D-labeled reactions show that the alkyne protons remain at the alkyne terminal carbon atoms and carboxylic acid protonates the C(1) carbon atom. QM/MM (ONIOM) calculations, supporting a mixed Fischer-Schrock-type biscarbene complex, show that protonation occurs preferentially at the carbene carbon C(1) adjacent to Ru, in the relative cis position with respect to the Ru-Cl bond, to give a mixed C(1)alkyl-C(4)carbene complex in which the C(4) carbene is conjugated with the noncoordinated C(2)=C(3) double bond. This 16-electron intermediate has a weak stabilizing alpha agostic C-H bond. This most stable isomer appears to have a C(4) center more accessible to the nucleophilic addition which accounts for the experimentally observed product.

Journal Article↗
PubMed2003

PGSE and NOE NMR evidence for higher order aggregation in some cationic ruthenium complexes in both protic and aprotic solvents.

PGSE and NOE NMR measurements were carried out for complexes [Ru(eta(6)-cymene)((2-R-C(6)H(4))N=C(Me)-C(Me)=N(2-R-C(6)H(4)))Cl]X (X = BF(4) or BPh(4)) in both protic and aprotic solvents with a relative permettivity (epsilon(r)) ranging from 2.27 (benzene-d(6)) to 46.45 (dimethyl sulfoxide-d(6)). PGSE and NOE results indicate that complexes have a tendency to aggregate even in medium-polarity solvents such as ethanol (epsilon(r) = 24.55) and methanol (epsilon(r) = 32.66). In addition, the aggregation process is favored by a decrease of epsilon(r) and, unexpectedly, by protic solvents. NOE measurement investigations, interpreted with the help of theoretical calculations and confirmed by X-ray single crystal studies, suggest different aggregation processes for the two counteranions: two cationic moieties approach each other when X = BF(4) while the anion bridges two cationic moieties when X = BPh(4).

Journal Article↗
PubMed2002

Synthesis and reactivity of the imidotungsten methyl cation [W(N2Npy)(NPh)Me]+: CO2 adds to the W=NPh bond and does not insert into the W-Me bond.

The imidotungsten dimethyl compound [W(N2Npy)(NPh)Me2] 2 reacts with BArF3 to form the cationic complex [W(N2Npy)(NPh)Me]+ 3+ [anion = [MeBArF3]-; ArF = C6F5; N2Npy = MeC(2C5H4N)(CH2NSiMe3)2] which undergoes methyl group exchange with added 2, [Cp2ZrMe2] or ZnMe2; treatment of cation 3+ with CO2 or isocyanates leads to cycloaddition reactions at the W=NPh bond and not insertion into the W-Me bond, despite the latter product being the most thermodynamically favourable according to DFT calculations.

Journal Article↗