Biomedical subjects

Enrico Drioli

Publications and source records attributed to Enrico Drioli.

13 recordsLinked to original sources

PubMed2006

Zeolite inorganic supports for BSA immobilization: comparative study of several zeolite crystals and composite membranes.

Zeolites due to their low toxicity and high compatibility are considered new biomaterials for medical applications. The surface adsorption behaviour of zeolite crystals and composite membranes was discussed in this research. The zeolite materials were synthesized by hydrothermal syntheses using different reaction gels to modulate the Brönsted acidity of the microporous structures. Spectrophotometric analyses were used to evaluate protein adsorption on these surfaces. This study revealed that zeolite chemical composition and structure influenced the kinetics of protein adsorption. Zeolite Y surface adsorbed greater amount of BSA than the other structures. The percentage of adsorption increases with temperature and depends on the pH of the solution, being highest at the pI of the protein. The influence of the membrane configuration on the protein adsorption was studied using different zeolite structures and crystallization types. It seems that the observed differences could depend on the type of hydrothermal crystallization inside the inorganic support.

Adsorption↗

PubMed2006

Characteristics and performance of a "universal" membrane suitable for gas separation, pervaporation, and nanofiltration applications.

The large diversity of membrane separation processes results in a different optimization of membrane materials and structures for each process. In this article, the extent to which a single membrane type can be used in gas separation, pervaporation, and nanofiltration has been investigated. Interpretation of transport and separation properties has led to the conclusion that the membrane SolSep 3360 is a multifunctional membrane fulfilling all requirements for the three separation processes. This can be achieved by keeping a good balance between the thickness of the top layer, sterical hindrance during transport, and the effect of hydrophobicity/hydrophilicity.

Journal Article↗

PubMed2006

Novel membranes and surface modification able to activate specific cellular responses.

The design of new polymeric biomaterials together with new strategies to modify membrane surface are crucial to optimise cell-biomaterial interactions in vivo and in vitro biohybrid systems. In this study we report on the novel semipermeable membranes synthesised from a polymeric blend of modified polyetheretherketone and polyurethane able to support the long-term maintenance and differentiation of human liver cells and on the surface modification of polyethersulfone membranes by plasma polymerisation of acrylic acid monomers and by immobilization of arginine-glycine-aspartic acid (RGD) peptide through a hydrophilic "spacer arm" molecule. The performance of the modified and unmodified membranes was tested by evaluation of the liver function expression of primary human hepatocytes in terms of albumin production, protein secretion and drug biotransformation.

Benzophenones↗

PubMed2006

Influence of the structural properties of poly(vinylidene fluoride) membranes on the heterogeneous nucleation rate of protein crystals.

In this study, the influence of the morphological parameters of microporous poly(vinylidene fluoride) (PVDF) membranes on the heterogeneous nucleation rate of hen egg white lysozyme (HEWL) crystals has been investigated. Experiments have been carried out on membranes prepared by non-solvent-induced phase inversion method, using PVDF-co-hexafluoropropylene (Kynarflex 2800) and PVDF homopolymer (Kinar 460), and adding LiCl and poly(vinylpyrrolidone) (PVP) in order to modulate the pore structure. From a theoretical point of view, the free Gibbs energy balance for the formation of a critical nucleus has been adapted to nonporous surfaces, thus obtaining a mathematical correlation between the energy nucleation barrier, the membrane porosity, and the contact angle between protein solution and polymeric substrate. The energetic barrier to heterogeneous nucleation was found to increase at higher contact angles-according to the prediction of classical theory-and to decrease at higher porosity. For instance, the predicted deltaG(het)/deltaG(hom) ratio for PVDF-Kynarflex (PVP 2.5%) membrane with porosity of 0.11 was 0.30, 35% lower with respect to the value calculated by the Volmer equation for a dense polymeric matrix having the same contact angle (87.4 +/- 5.8 degrees). In addition, the effect of the membrane pore size, porosity, and thickness on the removal rate of solvent have been discussed. For example, the transmembrane flux through PVDF-Kynar (LiCl 5.0%) membrane was 12% inferior than the one measured under the same experimental conditions through PVDF-Kynarflex (LiCl 7.5%) membrane, the latter having similar pore size and thickness but higher porosity (0.44 vs 0.32). The possibility to achieve rapidly a high level of supersaturation is expected to increase the nucleation rate. In general, measurements performed during crystallization tests carried out at pH 4.5 in NaAc 0.05 M buffer with different precipitant (NaCl) concentrations agree with the predicted trends.

Crystallization↗

PubMed2006

Long-term maintenance of human hepatocytes in oxygen-permeable membrane bioreactor.

An oxygen-permeable membrane bioreactor utilizing human hepatocytes has been tested in this study. In the bioreactor, human hepatocytes were cultured between flat-sheet gas-permeable polymeric membranes, which ensure the diffusion of O(2) and CO(2) providing a support for cell anchorage and growth and permit the online observation of the cells with an inverse microscope. This bioreactor allows a direct oxygenation of cells adhered on membranes and of the medium overlaying cells simulating in vivo sinusoidal organization. Human hepatocytes were cultured in the presence of some therapeutic molecules to assess the temporal liver-specific functions of the cells. Interleukin 6 (IL-6), which is a multifactorial proinflammatory cytokine involved in a variety of host defences and pathological processes, and diclofenac, an arylacetic non-steroidal anti-inflammatory drug, were used as therapeutic molecules. The aim of this study was to evaluate the in vitro performance of the small oxygen-permeable membrane bioreactor in the long-term maintenance and differentiation of human hepatocytes under in-vivo-like conditions. The fluid dynamics of the bioreactor were characterized before using it for human cell culture. The functional response to a step challenge in the medium of IL-6 (120 pg/ml), diclofenac (80 microm) and IL-6 and diclofenac together was investigated. The ability of hepatocytes to perform liver-specific functions in terms of urea and albumin synthesis, as well as secretion of total proteins, was maintained for 32 days. Also, the diclofenac biotransformation functions were sustained as the formation of the metabolites 4'-OH-diclofenac and 5-OH-diclofenac lactam demonstrated. This study attested the feasibility of the membrane bioreactor as an in vitro simple model system that allows human hepatocytes to be maintained in a differentiated state similar to that in vivo.

Bioreactors↗

PubMed2006

Membrane bioreactor for cell tissues and organoids.

Progresses in polymeric membrane preparation and in the understanding and control of their transport properties make possible the design of novel membranes to be used for cell culture (e.g., hepatocytes, lymphocytes, pancreatic islets) in biohybrid systems such as therapeutic device or as in vitro model systems for studying the effects of various drugs and chemicals on cell metabolism. Special attention is paid to the design of the membrane with defined microstructure and physicochemical properties as well as to the importance of transport and physicochemical properties of the membrane in contact with the cells. The development of new biomaterials and bioreactors able to activate a specific response of the cells and to maintain cell differentiation for a long time is one of the most pertinent issues in the field of tissue engineering and regenerative medicine. Polymeric membranes are attractive for their selectivity and biostability characteristics in the use of biohybrid systems for cell culture. Semipermeable membranes act as a support for the adhesion of anchorage-dependent cells and allow the specific transport of metabolites and nutrients to cells and the removal of catabolites and specific products. Moreover, new membrane systems that have been recently realized as the membrane contactors might also potentially contribute to regenerative medicine and tissue engineering.

Bioreactors↗

PubMed2006

Galactose derivative immobilized glow discharge processed polyethersulfone membranes maintain the liver cell metabolic activity.

New strategies aimed to surface modification of polymeric membranes are crucial to optimise cell-biomaterial interactions in vivo and in vitro biohybrid systems. In this paper, we investigated the surface modification of Polyethersulfone (PES) membranes by plasma polymerisation of acrylic acid monomers (PES-pdAA) and by immobilization of galactonic acid through a hydrophilic "spacer arm" molecule (PES-pdAA-SA-GAL). The modification steps were characterised by high resolution X-ray photoelectron spectroscopy. The performance of modified and unmodified membranes was evaluated by assessing the expression of liver specific biotransformation functions of pig and human hepatocytes. Human liver cells cultured on PES-pdAA-SA-GAL membranes displayed an enhanced albumin production, urea synthesis and protein secretion for 24 days of culture. The immobilisation of galactose derivative units on the membrane allowed specific interactions with hepatocytes biomimicking the cellular microenvironment and produced an improvement of the long-term maintenance and differentiation of human hepatocytes.

Acrylates↗

PubMed2005

Biotransformation and liver-specific functions of human hepatocytes in culture on RGD-immobilized plasma-processed membranes.

In this paper we report on the metabolic response of human hepatocytes grown on polyethersulfone membranes surface modified with a plasma-deposited acrylic acid coating and RGD peptide covalently immobilized through a "spacer arm" molecule. The modified surfaces were characterized by means of X-ray photoelectron spectroscopy and water contact angle measurements. The performance of modified and unmodified membranes was evaluated by assessing the expression of liver specific and biotransformation functions of human hepatocytes. Diclofenac, a non-steroidal anti-inflammatory drug, was used to investigate the biotransformation functions. Surface-modified membranes elicit specific cellular responses and induce hepatocytes to enhance the synthesis rate of albumin and urea, particularly in the presence of diclofenac. Also the biotransformation functions were expressed at high levels.

Adsorption↗

PubMed2005

Effect of isoliquiritigenin on viability and differentiated functions of human hepatocytes maintained on PEEK-WC-polyurethane membranes.

In this study, we tested the ability of microporous membranes synthesised from a polymeric blend of modified polyetheretherketone (PEEK-WC) and polyurethane (PU) to support long-term maintenance and differentiation of human liver cells. The effect of isoliquiritigenin (ISL), which is a component of liquorice extract, exhibiting growth stimulatory and antiproliferative dose-dependent effect was investigated by comparing cultures treated with ISL with those untreated. To this purpose, flat-sheet membranes were prepared by a blend of PEEK-WC and PU polymers by phase inverse technique. The morphological and physico-chemical properties were characterised, respectively, by scanning electron microscopy and water contact angle measurements. Human hepatocytes cultured on PEEK-WC-PU membranes were constant up to 1 month albumin production and urea synthesis as well as the synthesis of total proteins. The liver-specific functions were expressed at high levels when cells were cultured on membranes with respect to collagen. Also the biotransformation functions were maintained for all culture periods: the ISL elimination rate increased during the culture time and high values were measured up to 22 days. Thereafter, a decrease was observed. ISL stimulated the proliferation of hepatocytes cultured on both substrata but did not affect their liver-specific functions. Hepatocytes cultured on PEEK-WC-PU membranes responded very well to ISL and expressed high levels of P450 cytochrome. These results demonstrated that long-term maintenance of human liver differentiation can be achieved on PEEK-WC-PU membranes. The incubation with ISL at the investigated concentration could stimulate the proliferation of human hepatocytes in biohybrid systems.

Benzophenones↗

PubMed2005

Trypsin crystallization by membrane-based techniques.

To grow protein crystals is not an easy task; moreover, if we need to grow protein crystals with controlled shape, size, and size distribution, depending on their application, the mission becomes even harder. Membrane crystallization has been recognized as an interesting tool for growing protein crystals with enhanced crystallization kinetics, both in static and in forced solution flow configuration, without detrimental effects on crystal quality. In the present work, we have studied the membrane crystallization process of benzamidine inhibited trypsin from bovine pancreas (BPT), with ammonium sulphate (dissolved in Tris-HCl buffer, 0.1 M, pH 8.5), as precipitant agent. We have demonstrated that, by using the membrane crystallization technique, BPT crystals can be obtained in 24-48 h, in static configuration, and in 4-7 days, in a forced solution flow system, depending on the experimental conditions. Furthermore, the kinetics of BPT crystallization have been modulated, to control the morphological characteristics of the crystals produced, by an accurate selection of the operative parameters involved in the process. The active membrane surface and the flow rate of extraction solvent in quiescent configuration, and the solution velocity in forced convection solution experiments, were the parameters investigated. In this respect, membrane crystallization techniques have been assessed as an interesting way for growing proteins, and more specifically enzyme crystals, with high control on the final properties of the crystalline material produced, with potential fundamental implication in the field of structural biology and biotechnology.

Animals↗

PubMed2003

Membrane contactors in the beverage industry for controlling the water gas composition.

In the work described here, membrane contactors are used for coupling the removal of species (oxygen and hydrogen sulfide) present in the water with the water carbonation process. We include both experiments and a theoretical study devoted to the analysis of the transport phenomena that occur in the membrane contactor. The main resistance to mass transport was located at the liquid side. Correlations between Sherwood and Reynolds numbers on the shell side that are suitable for the membrane contactor used to carry out our experiments have been determined. In particular, for Re > 1.6, the expression proposed by Yang and Cussler in 1986: Sh = 0.90 Re(0.40) Sc(0.33) describes the behavior of the system; whereas, for Re between 0.03 and 0.3, a new expression is proposed: Sh = 0.435 Re(1.2)Sc(0.33). A comparison with traditional equipment is also furnished. Membrane contactors offer reduced size, CO(2) consumption, and capital costs.

Journal Article↗

PubMed2003

Effect of immobilization site and membrane materials on multiphasic enantiocatalytic enzyme membrane reactors.

In the experimental work reported here the optical resolution of racemic naproxen methyl ester with crude lipase immobilized in a membrane reactor was studied. The multiphasic enantiocatalytic enzyme membrane reactor consisted of an organic phase that dissolved the naproxen methyl ester, a lipase-loaded membrane, and an aqueous phase that extracted the reaction product. Lipase preferentially converted the (S)-naproxen methyl ester to (S)-naproxen acid that was simultaneously separated by a membrane. The effect of the immobilization site and membrane type on the performance of the enzyme membrane reactor was studied. Capillary polyamide membrane with 10 kDa nominal molecular weight cutoff (NMWCO) and polysulfone membrane with 30 kDa NMWCO were applied, with lipase loaded in the sponge layer or on a membrane thin layer. With various immobilization sites and membrane types, the enzyme membrane reactors showed different productivity and enantioselectivity resulting from the varying amounts of immobilized enzyme and varying microenvironment of the hydrolysis reaction. Higher amounts of immobilized enzyme led to increased productivity and generally higher enantioslectivity of the membrane reactor. It seems that the location of organic/aqueous interface on membrane, which plays an important role in a multiphasic enzyme membrane reactor, was influenced by the immobilization site and membrane type and this affected the productivity and enantioselectivity. As much as 90% enantioexcess was obtained with a polyamide membrane, and lower values with a polysulfone membrane. A sponge layer of polyamide membrane is the preferred immobilization site for its higher productivity than a thin membrane layer, and for its higher enantioselectivity than a polysulfone membrane. In comparison with the unstable hydrolysis activity of free lipase in stirred tank reactor, a stable lipase activity can be obtained with the lipase-immobilized membrane reactor, irrespective of whether a polyamide or polysulfone membrane is used.

Bioreactors↗

PubMed2002

Evaluation of cell behaviour related to physico-chemical properties of polymeric membranes to be used in bioartificial organs.

In bioartificial organs using isolated cells, polymeric semipermeable membranes are used as immunoselective barriers as a means for cell oxygenation and also as substrata for adhesion of anchorage-dependent cells. The capacity of the membrane to perform its functions and to provide a cytocompatible support for cell culture depends in particular on its surface properties. In this study we investigated the physico-chemical aspects of the interaction between the membrane and mammalian cells in order to provide guidelines to the selection of cytocompatible membranes. We evaluated the adhesion and metabolic behaviour of isolated liver cells cultured on various polymeric membranes such as those modified by protein adsorption. The physico-chemical properties of the membranes were characterised by contact angle measurements. The different parameters such as acid (gamma+), base (gamma-) and Lifshitz-van der Waals (gammaLW) of the surface free energy were calculated according to Good-van Oss's model. The adsorption of protein modified markedly both contact angle and components of membrane surface tension. In particular, base parameter of surface tension decreased drastically with increased water contact angle. For each investigated membrane we observed that cell adhesion increased with increasing base parameter of membrane surface tension. The absolute value of cell adhesion is higher in the presence of serum proteins adsorbed on the membrane surface, which change the wettability by increasing the base parameter of surface tension. Also, the metabolic functions improve on hydrophilic membranes. Liver cells synthesised urea with a rate that increased with increasing base parameter value of membrane surface tension. The metabolic activity is particularly expressed at high levels when cells were cultured on polycarbonate and cellulose acetate membranes.

Animals↗