Search PubMed⌕ Search

Biomedical subjects

Edward I Solomon

Publications and source records attributed to Edward I Solomon.

At least 55 records · Page 3Linked to original sources

Geometric and electronic structure of the heme-peroxo-copper complex [(F8TPP)FeIII-(O22-)-CuII(TMPA)](ClO4).

The geometric and electronic structure of the untethered heme-peroxo-copper model complex [(F(8)TPP)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](ClO(4)) (1) has been investigated using Cu and Fe K-edge EXAFS spectroscopy and density functional theory calculations in order to describe its geometric and electronic structure. The Fe and Cu K-edge EXAFS data were fit with a Cu...Fe distance of approximately 3.72 A. Spin-unrestricted DFT calculations for the S(T) = 2 spin state were performed on [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) as a model of 1. The peroxo unit is bound end-on to the copper, and side-on to the high-spin iron, for an overall mu-eta(1):eta(2) coordination mode. The calculated Cu...Fe distance is approximately 0.3 A longer than that observed experimentally. Reoptimization of [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) with a 3.7 A Cu...Fe constrained distance results in a similar energy and structure that retains the overall mu-eta(1):eta(2)-peroxo coordination mode. The primary bonding interaction between the copper and the peroxide involves electron donation into the half-occupied Cu d(z)2 orbital from the peroxide pi(sigma) orbital. In the case of the Fe(III)-peroxide eta(2) bond, the two major components arise from the donor interactions of the peroxide pi*(sigma) and pi*(v) orbitals with the Fe d(xz) and d(xy) orbitals, which give rise to sigma and delta bonds, respectively. The pi*(sigma) interaction with both the half-occupied d(z)2 orbital on the copper (eta(1)) and the d(xz) orbital on the iron (eta(2)), provides an effective superexchange pathway for strong antiferromagnetic coupling between the metal centers.

Copper↗

Sulfur K-edge XAS and DFT calculations on P450 model complexes: effects of hydrogen bonding on electronic structure and redox potentials.

Hydrogen bonding (H-bonding) is generally thought to play an important role in tuning the electronic structure and reactivity of metal-sulfur sites in proteins. To develop a quantitative understanding of this effect, S K-edge X-ray absorption spectroscopy (XAS) has been employed to directly probe ligand-metal bond covalency, where it has been found that protein active sites are significantly less covalent than their related model complexes. Sulfur K-edge XAS data are reported here on a series of P450 model complexes with increasing H-bonding to the ligated thiolate from its substituent. The XAS spectroscopic results show a dramatic decrease in preedge intensity. DFT calculations reproduce these effects and show that the observed changes are in fact solely due to H-bonding and not from the inductive effect of the substituent on the thiolate. These calculations also indicate that the H-bonding interaction in these systems is mainly dipolar in nature. The -2.5 kcal/mol energy of the H-bonding interaction was small relative to the large change in ligand-metal bond covalency (30%) observed in the data. A bond decomposition analysis of the total energy is developed to correlate the preedge intensity change to the change in Fe-S bonding interaction on H-bonding. This effect is greater for the reduced than the oxidized state, leading to a 260 mV increase in the redox potential. A simple model shows that E degrees should vary approximately linearly with the covalency of the Fe-S bond in the oxidized state, which can be determined directly from S K-edge XAS.

Binding Sites↗

A combined quantum and molecular mechanical study of the O2 reductive cleavage in the catalytic cycle of multicopper oxidases.

The four-electron reduction of dioxygen to water in multicopper oxidases takes place in a trinuclear copper cluster, which is linked to a mononuclear blue copper site, where the substrates are oxidized. Recently, several intermediates in the catalytic cycle have been spectroscopically characterized, and two possible structural models have been suggested for both the peroxy and native intermediates. In this study, these spectroscopic results are complemented by hybrid quantum and molecular mechanical (QM/MM) calculations, taking advantage of recently available crystal structures with a full complement of copper ions. Thereby, we obtain optimized molecular structures for all of the experimentally studied intermediates involved in the reductive cleavage of the O(2) molecule and energy profiles for individual reaction steps. This allows identification of the experimentally observed intermediates and further insight into the reaction mechanism that is probably relevant for the whole class of multicopper oxidases. We suggest that the peroxy intermediate contains an O(2)(2-) ion, in which one oxygen atom bridges the type 2 copper ion and one of the type 3 copper ions, whereas the other one coordinates to the other type 3 copper ion. One-electron reduction of this intermediate triggers the cleavage of the O-O bond, which involves the uptake of a proton. The product of this cleavage is the observed native intermediate, which we suggest to contain a O(2-) ion coordinated to all three of the copper ions in the center of the cluster.

Algorithms↗

Spectroscopic and DFT investigation of [M{HB(3,5-iPr2pz)3}(SC6F5)] (M = Mn, Fe, Co, Ni, Cu, and Zn) model complexes: periodic trends in metal-thiolate bonding.

A series of metal-varied [ML(SC6F5)] model complexes (where L = hydrotris(3,5-diisopropyl-1-pyrazolyl)borate and M = Mn, Fe, Co, Ni, Cu, and Zn) related to blue copper proteins has been studied by a combination of absorption, MCD, resonance Raman, and S K-edge X-ray absorption spectroscopies. Density functional calculations have been used to characterize these complexes and calculate their spectra. The observed variations in geometry, spectra, and bond energies are interpreted in terms of changes in the nature of metal-ligand bonding interactions. The metal 3d-ligand orbital interaction, which contributes to covalent bonding in these complexes, becomes stronger going from Mn(II) to Co(II) (the sigma contribution) and to Cu(II) (the pi contribution). This change in the covalency results from the increased effective nuclear charge of the metal atom in going from Mn(II) to Zn(II) and the change in the 3d orbital populations (d5-->d10). Ionic bonding also plays an important role in determining the overall strength of the ML(+)-SC6F5(-) interaction. However, there is a compensating effect: as the covalent contribution to the metal-ligand bonding increases, the ionic contribution decreases. These results provide insight into the Irving-Williams series, where it is found that the bonding of the ligand being replaced by the thiolate makes a major contribution to the observed order of the stability constants over the series of metal ions.

Borates↗

Tyrosinase reactivity in a model complex: an alternative hydroxylation mechanism.

The binuclear copper enzyme tyrosinase activates O2 to form a mu-eta2:eta2-peroxodicopper(II) complex, which oxidizes phenols to catechols. Here, a synthetic mu-eta2:eta2-peroxodicopper(II) complex, with an absorption spectrum similar to that of the enzymatic active oxidant, is reported to rapidly hydroxylate phenolates at -80 degrees C. Upon phenolate addition at extreme temperature in solution (-120 degrees C), a reactive intermediate consistent with a bis-mu-oxodicopper(III)-phenolate complex, with the O-O bond fully cleaved, is observed experimentally. The subsequent hydroxylation step has the hallmarks of an electrophilic aromatic substitution mechanism, similar to tyrosinase. Overall, the evidence for sequential O-O bond cleavage and C-O bond formation in this synthetic complex suggests an alternative intimate mechanism to the concerted or late stage O-O bond scission generally accepted for the phenol hydroxylation reaction performed by tyrosinase.

Binding Sites↗

Role of aspartate 94 in the decay of the peroxide intermediate in the multicopper oxidase Fet3p.

Fet3p is a multicopper oxidase that contains four Cu ions: one type 1, one type 2, and a coupled binuclear type 3 site. The type 2 and type 3 centers form a trinuclear cluster that is the active site for O(2) reduction to H(2)O. When the type 1 Cu is depleted (C484S mutation), the reaction of the reduced trinuclear cluster with O(2) generates a peroxide intermediate. Kinetic studies of the decay of the peroxide intermediate suggest that a carboxyl residue (D94 in Fet3p) assists the reductive cleavage of the O-O bond at low pH. Mutations at the D94 residue (D94A, D94N, and D94E) have been studied to evaluate its role in the decay of the peroxide intermediate. Spectroscopic studies show that the D94 mutations affect the geometric and electronic structure of the trinuclear cluster in a way that is consistent with the hydrogen bond connectivity of D94. While the D94E mutation does not affect the initial reaction of the cluster with O(2), the D94A mutation causes larger structural changes that render the trinuclear cluster unreactive toward O(2), demonstrating a structural role for the D94 residue. The decay of the peroxide intermediate is markedly affected by the D94E mutation, confirming the involvement of D94 in this reaction. The D94 residue appears to activate a proton of the type 2 Cu(+)-bound water for participation in the transition state. These studies provide new insight into the role of D94 and proton involvement in the reductive cleavage of the O-O bond.

Amino Acid Sequence↗

Spectroscopy of non-heme iron thiolate complexes: insight into the electronic structure of the low-spin active site of nitrile hydratase.

Detailed spectroscopic and computational studies of the low-spin iron complexes [Fe(III)(S2(Me2)N3 (Pr,Pr))(N3)] (1) and [Fe(III)(S2(Me2)N3 (Pr,Pr))]1+ (2) were performed to investigate the unique electronic features of these species and their relation to the low-spin ferric active sites of nitrile hydratases. Low-temperature UV/vis/NIR and MCD spectra of 1 and 2 reflect electronic structures that are dominated by antibonding interactions of the Fe 3d manifold and the equatorial thiolate S 3p orbitals. The six-coordinate complex 1 exhibits a low-energy S(pi) --> Fe 3d(xy) (approximately 13,000 cm(-1)) charge-transfer transition that results predominantly from the low energy of the singly occupied Fe 3d(xy) orbital, due to pure pi interactions between this acceptor orbital and both thiolate donor ligands in the equatorial plane. The 3d(pi) --> 3d(sigma) ligand-field transitions in this species occur at higher energies (>15,000 cm(-1)), reflecting its near-octahedral symmetry. The Fe 3d(xz,yz) --> Fe 3d(xy) (d(pi) --> d(pi)) transition occurs in the near-IR and probes the Fe(III)-S pi-donor bond; this transition reveals vibronic structure that reflects the strength of this bond (nu(e) approximately 340 cm(-1)). In contrast, the ligand-field transitions of the five-coordinate complex 2 are generally at low energy, and the S(pi) --> Fe charge-transfer transitions occur at much higher energies relative to those in 1. This reflects changes in thiolate bonding in the equatorial plane involving the Fe 3d(xy) and Fe 3d(x2-y2) orbitals. The spectroscopic data lead to a simple bonding model that focuses on the sigma and pi interactions between the ferric ion and the equatorial thiolate ligands, which depend on the S-Fe-S bond angle in each of the complexes. These electronic descriptions provide insight into the unusual S = 1/2 ground spin state of these complexes: the orientation of the thiolate ligands in these complexes restricts their pi-donor interactions to the equatorial plane and enforces a low-spin state. These anisotropic orbital considerations provide some intriguing insights into the possible electronic interactions at the active site of nitrile hydratases and form the foundation for further studies into these low-spin ferric enzymes.

Binding Sites↗

Spectroscopic and density functional studies of the red copper site in nitrosocyanin: role of the protein in determining active site geometric and electronic structure.

The electronic structure of the red copper site in nitrosocyanin is defined relative to that of the well understood blue copper site of plastocyanin by using low-temperature absorption, circular dichroism, magnetic circular dichroism, resonance Raman, EPR and X-ray absorption spectroscopies, combined with DFT calculations. These studies indicate that the principal electronic structure change in the red copper site is the sigma rather than the pi donor interaction of the cysteine sulfur with the Cu 3d(x2-y2) redox active molecular orbital (RAMO). Further, MCD data show that there is an increase in ligand field strength due to an increase in coordination number, whereas resonance Raman spectra indicate a weaker Cu-S bond. The latter is supported by the S K-edge data, which demonstrate a less covalent thiolate interaction with the RAMO of nitrosocyanin at 20% relative to plastocyanin at 38%. EXAFS results give a longer Cu-S(Cys) bond distance in nitrosocyanin (2.28 A) compared to plastocyanin (2.08 A) and also show a large change in structure with reduction of the red copper site. The red copper site is the only presently known blue copper-related site with an exogenous water coordinated to the copper. Density functional calculations reproduce the experimental properties and are used to determine the specific protein structure contributions to exogenous ligand binding in red copper. The relative orientation of the CuNNS and the CuSC(beta) planes (determined by the protein sequence) is found to be key in generating an exchangeable coordination position at the red copper active site. The exogenous water ligation at the red copper active site greatly increases the reorganization energy (by approximately 1.0 eV) relative to that of the blue copper protein site, making the red site unfavorable for fast outer-sphere electron transfer, while providing an exchangeable coordination position for inner-sphere electron transfer.

Bacterial Proteins↗

Metal and ligand K-edge XAS of organotitanium complexes: metal 4p and 3d contributions to pre-edge intensity and their contributions to bonding.

Titanium cyclopentadienyl (Cp) complexes play important roles as homogeneous polymerization catalysts and have recently received attention as potential anticancer agents. To systematically probe the contribution of the Cp to bonding in organotitanium complexes, Ti K-edge XAS has been applied to TiCl(4) and then to the mono- and bis-Cp complexes, TiCpCl(3) and TiCp(2)Cl(2). Ti K-edge XAS is used as a direct probe of metal 3d-4p mixing and provides insight into the contribution of the Cp to bonding. These data are complimented by Cl K-edge XAS data, which provide a direct probe of the effect of the Cp on the bonding to the spectator chloride ligand. The experimental results are correlated to DFT calculations. A model for metal 3d-4p mixing is proposed, which is based on covalent interactions with the ligands and demonstrates that metal K-pre-edge intensities may be used as a measure of ligand-metal covalency in molecular Ti(IV) systems in noncentrosymmetric environments.

Models, Molecular↗

Dioxygen activation by copper, heme and non-heme iron enzymes: comparison of electronic structures and reactivities.

Enzymes containing heme, non-heme iron and copper active sites play important roles in the activation of dioxygen for substrate oxidation. One key reaction step is CH bond cleavage through H-atom abstraction. On the basis of the ligand environment and the redox properties of the metal, these enzymes employ different methods of dioxygen activation. Heme enzymes are able to stabilize the very reactive iron(IV)-oxo porphyrin-radical intermediate. This is generally not accessible for non-heme iron systems, which can instead use low-spin ferric-hydroperoxo and iron(IV)-oxo species as reactive oxidants. Copper enzymes employ still a different strategy and achieve H-atom abstraction potentially through a superoxo intermediate. This review compares and contrasts the electronic structures and reactivities of these various oxygen intermediates.

Binding Sites↗

Dioxygen activation at a single copper site: structure, bonding, and mechanism of formation of 1:1 Cu-O2 adducts.

To evaluate the fundamental process of O(2) activation at a single copper site that occurs in biological and catalytic systems, a detailed study of O(2) binding to Cu(I) complexes of beta-diketiminate ligands L (L(1) = backbone Me; L(2) = backbone tBu) by X-ray crystallography, X-ray absorption spectroscopy (XAS), cryogenic stopped-flow kinetics, and theoretical calculations was performed. Using synchrotron radiation, an X-ray diffraction data set for L(2)CuO(2) was acquired, which led to structural parameters in close agreement to theoretical predictions. Significant Cu(III)-peroxo character for the complex was corroborated by XAS. On the basis of stopped-flow kinetics data and theoretical calculations for the oxygenation of L(1)Cu(RCN) (R = alkyl, aryl) in THF and THF/RCN mixtures between 193 and 233 K, a dual pathway mechanism is proposed involving (a) rate-determining solvolysis of RCN by THF followed by rapid oxygenation of L(1)Cu(THF) and (b) direct, bimolecular oxygenation of L(1)Cu(RCN) via an associative process.

Binding Sites↗

Ligand K-edge X-ray absorption spectroscopy and DFT calculations on [Fe3S4]0,+ clusters: delocalization, redox, and effect of the protein environment.

Ligand K-edge XAS of an [Fe3S4]0 model complex is reported. The pre-edge can be resolved into contributions from the mu(2)S(sulfide), mu(3)S(sulfide), and S(thiolate) ligands. The average ligand-metal bond covalencies obtained from these pre-edges are further distributed between Fe(3+) and Fe(2.5+) components using DFT calculations. The bridging ligand covalency in the [Fe2S2]+ subsite of the [Fe3S4]0 cluster is found to be significantly lower than its value in a reduced [Fe2S2] cluster (38% vs 61%, respectively). This lowered bridging ligand covalency reduces the superexchange coupling parameter J relative to its value in a reduced [Fe2S2]+ site (-146 cm(-1) vs -360 cm(-1), respectively). This decrease in J, along with estimates of the double exchange parameter B and vibronic coupling parameter lambda2/k(-), leads to an S = 2 delocalized ground state in the [Fe3S4]0 cluster. The S K-edge XAS of the protein ferredoxin II (Fd II) from the D. gigas active site shows a decrease in covalency compared to the model complex, in the same oxidation state, which correlates with the number of H-bonding interactions to specific sulfur ligands present in the active site. The changes in ligand-metal bond covalencies upon redox compared with DFT calculations indicate that the redox reaction involves a two-electron change (one-electron ionization plus a spin change of a second electron) with significant electronic relaxation. The presence of the redox inactive Fe(3+) center is found to decrease the barrier of the redox process in the [Fe3S4] cluster due to its strong antiferromagnetic coupling with the redox active Fe2S2 subsite.

Binding Sites↗

Spectroscopic demonstration of a large antisymmetric exchange contribution to the spin-frustrated ground state of a D3 symmetric hydroxy-bridged trinuclear Cu(II) complex: ground-to-excited state superexchange pathways.

The magnetic and electronic properties of a spin-frustrated ground state of an antiferromagnetically coupled 3-fold symmetric trinuclear copper complex (TrisOH) is investigated using a combination of variable-temperature variable-field magnetic circular dichroism (VTVH MCD) and powder/single-crystal EPR. Direct evidence for a low-lying excited S = (1)/(2) state from the zero-field split ground (2)E state is provided by the nonlinear dependence of the MCD intensity on 1/T and the nesting of the VTVH MCD isotherms. A consistent zero-field splitting (Delta) value of approximately 65 cm(-1) is obtained from both approaches. In addition, the strong angular dependence of the single-crystal EPR spectrum, with effective g-values from 2.32 down to an unprecedented 1.2, requires in-state spin-orbit coupling of the (2)E state via antisymmetric exchange. The observable EPR intensities also require lowering of the symmetry of the trimer structure, likely reflecting a magnetic Jahn-Teller effect. Thus, the Delta of the ground (2)E state is shown to be governed by the competing effects of antisymmetric exchange (G = 36.0 +/- 0.8 cm(-1)) and symmetry lowering (delta = 17.5 +/- 5.0 cm(-1)). G and delta have opposite effects on the spin distribution over the three metal sites where the former tends to delocalize and the latter tends to localize the spin of the S(tot) = (1)/(2) ground state on one metal center. The combined effects lead to partial delocalization, reflected by the observed EPR parallel hyperfine splitting of 74 x 10(-4) cm(-1). The origin of the large G value derives from the efficient superexchange pathway available between the ground d(x2-y2) and excited d(xy) orbitals of adjacent Cu sites, via strong sigma-type bonds with the in-plane p-orbitals of the bridging hydroxy ligands. This study provides significant insight into the orbital origin of the spin Hamiltonian parameters of a spin-frustrated ground state of a trigonal copper cluster.

Cations, Divalent↗

O2 activation by binuclear Cu sites: noncoupled versus exchange coupled reaction mechanisms.

Binuclear Cu proteins play vital roles in O(2) binding and activation in biology and can be classified into coupled and noncoupled binuclear sites based on the magnetic interaction between the two Cu centers. Coupled binuclear Cu proteins include hemocyanin, tyrosinase, and catechol oxidase. These proteins have two Cu centers strongly magnetically coupled through direct bridging ligands that provide a mechanism for the 2-electron reduction of O(2) to a mu-eta(2):eta(2) side-on peroxide bridged Cu(II)(2)(O(2)(2-)) species. This side-on bridged peroxo-Cu(II)(2) species is activated for electrophilic attack on the phenolic ring of substrates. Noncoupled binuclear Cu proteins include peptidylglycine alpha-hydroxylating monooxygenase and dopamine beta-monooxygenase. These proteins have binuclear Cu active sites that are distant, that exhibit no exchange interaction, and that activate O(2) at a single Cu center to generate a reactive Cu(II)/O(2) species for H-atom abstraction from the C-H bond of substrates. O(2) intermediates in the coupled binuclear Cu enzymes can be trapped and studied spectroscopically. Possible intermediates in noncoupled binuclear Cu proteins can be defined through correlation to mononuclear Cu(II)/O(2) model complexes. The different intermediates in these two classes of binuclear Cu proteins exhibit different reactivities that correlate with their different electronic structures and exchange coupling interactions between the binuclear Cu centers. These studies provide insight into the role of exchange coupling between the Cu centers in their reaction mechanisms.

Binding Sites↗

N2O reduction by the mu4-sulfide-bridged tetranuclear CuZ cluster active site.

Nitrous oxide (N2O) reduction is a chemical challenge both in the selective oxidation of organic substrates by N2O and in the removal of N2O as a green-house gas. The reduction of N2O is thermodynamically favorable but kinetically inert, and requires activating transition-metal centers. In biological systems, N2O reduction is the last step in the denitrification process of the bacterial nitrogen cycle and is accomplished by the enzyme nitrous oxide reductase, whose active site consists of a micro4-sulfide-bridged tetranuclear CuZ cluster which has many unusual spectroscopic features. Recent studies have developed a detailed electronic-structure description of the resting CuZ cluster, determined its catalytically relevant state, and provided insight into the role of this tetranuclear copper cluster in N2O activation and reduction.

Binding Sites↗

Nature of the peroxo intermediate of the W48F/D84E ribonucleotide reductase variant: implications for O2 activation by binuclear non-heme iron enzymes.

Analysis of the spectroscopic signatures of the R2-W48F/D84E biferric peroxo intermediate identifies a cis mu-1,2 peroxo coordination geometry. DFT geometry optimizations on both R2-W48F/D84E and R2-wild-type peroxo intermediate models including constraints imposed by the protein also identify the cis mu-1,2 peroxo geometry as the most stable peroxo intermediate structure. This study provides significant insight into the electronic structure and reactivity of the R2-W48F/D84E peroxo intermediate, structurally related cis mu-1,2 peroxo model complexes, and other enzymatic biferric peroxo intermediates.

Binding Sites↗