Biomedical subjects

Eduardo C Meurer

Publications and source records attributed to Eduardo C Meurer.

15 recordsLinked to original sources

PubMed2006

The atmospheric pressure Meerwein reaction.

We have already shown that the in-vacuum gas-phase Meerwein reaction of (thio)acylium ions is general in nature and useful for class-selective screening of cyclic (thio)epoxides. Herein we report that this gas-phase reaction can also be performed efficiently at atmospheric pressure under both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) conditions. This alternative expands the range of molecules that can be reacted by gas-phase Meerwein reaction. Phenyl epoxide, thiirane, 3-methoxy-2,2-dimethyloxirane, propylene oxide, 2,2'-bioxirane, trans-1,3-diphenyl-2,3-epoxypropan-1-one, epichloridrine and propylene oxide are shown to react efficiently in both ESI and APCI conditions. Tetramethylurea (TMU) and (thio)TMU were both used as dopants, being co-injected with either toluene, acetonitrile or methanol solutions of the (thio)epoxides, with similar results. In both ESI and APCI, (thio)TMU is protonated preferentially, and these labile species dissociate promptly to yield (CH3)2N-C+=O and (CH3)2NCS+, which are the least acidic and most reactive (thio)acylium ions so far tested in the gas-phase Meerwein reaction. Under the low-energy ESI conditions set to favor both the formation of the (thio)acylium ion and ion/molecule reactions, (CH3)2NCO(S)+ react competitively with (thio)TMU to form acylated (thio)TMU and with the (thio)epoxide to form the characteristic Meerwein products. Enhanced selectivity in structural characterization or for the screening of (thio)epoxides is achieved by performing on-line collision-induced dissociation of Meerwein products, particularly for the more structurally complex (thio)epoxides.

Journal Article↗

PubMed2006

Formal gas-phase polar [4 + 1+] cycloaddition of ionized methylene to alpha-dicarbonyl compounds: synthesis of 2-unsubstituted 1,3-dioxoles.

Ion/molecule reactions of +CH2OCH2. with alpha-dicarbonyl compounds were performed via pentaquadrupole mass spectrometry. Besides the previously known [3+ + 2] 1,3-cycloaddition reaction that forms cyclic 1,3-dioxonium ions, an unprecedented reaction proceeding formally by [4 + 1+] cycloaddition of ionized methylene (CH2+.) to the alpha-dicarbonyl compounds occurs competitively, leading to the gas-phase synthesis of several ionized 2-unsubstituted 1,3-dioxoles. This novel cycloaddition reaction may therefore be added to the set of methods available for the synthesis of 1,3-dioxoles.

Journal Article↗

PubMed2005

Hydrogen/Chlorine exchange reactions of gaseous carbanions.

Gas-phase reactions of three typical carbanions CH(2)NO(2)(-), CH(2)CN(-), and CH(2)S(O)CH(3)(-) with the chloromethanes CH(2)Cl(2), CHCl(3), and CCl(4), examined by tandem mass spectrometry, show a novel hydrogen/chlorine exchange reaction. For example, reaction between the nitromethyl anion CH(2)NO(2)(-) and carbon tetrachloride CCl(4) forms the ion CHClNO(2)(-). The suggested reaction mechanism involves nucleophilic attack by CH(2)NO(2)(-) at the chlorine of CCl(4) followed by proton transfer within the resulting complex [CH(2)ClNO(2) + CCl(3)(-)] to form CHClNO(2)(-) and CHCl(3). Two other carbanions CH(2)CN(-) and CH(2)S(O)CH(3)(-) also undergo the novel hydrogen/chlorine exchange reactions with CCl(4) but to a much smaller extent, their higher nucleophilicities favoring competitive nucleophilic attack reactions. Proton abstraction is the exclusive pathway in the reactions of these carbanions with CHCl(3). While CH(2)CN(-) and CH(2)S(O)CH(3)(-) promote mainly proton abstraction and nucleophilic displacement in reactions with CH(2)Cl(2), CH(2)NO(2)(-) does not react.

Anions↗

PubMed2005

Cyclization reactions of acylium and thioacylium ions with isocyanates and isothiocyanates: gas phase synthesis of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions.

Gas-phase reactions of several acylium and thioacylium ions, that is H2C=N-C+=O, H2C=N-C+=S, O=C=N-C+=O, S=C=N-C+=O, H3C-C+=O, and (CH3)2N-C+=O, with both a model isocyanate and isothiocyanate, that is, C2H5-N=C=O and C2H5-N=C=S, were investigated using tandem-in-space pentaquadrupole mass spectrometry. In these reactions, the formation of mono- and double-addition products is observed concurrently with proton transfer products. The double-addition products are far more favored in reactions with ethyl isocyanate, whereas the reactions with ethyl isothiocyanate form, preferentially, either the mono-addition product or proton transfer products, or both. Retro-addition dominates the low-energy collision-induced dissociation of the mono- and double-addition products with reformation of the corresponding reactant ions. Ab initio calculations at Becke3LYP//6-311 + G(d,p) level indicate that cyclization is favored for the double-addition products and that products equivalent to those synthesized in solution, that is, of 3,4-dihydro-2,4-dioxo-2H-1,3,5-oxadiazinium ions and sulfur analogs, are formed.

Acetals↗

PubMed2004

Determination of phthalates in water using fiber introduction mass spectrometry.

Fiber introduction mass spectrometry (FIMS)-a direct coupling of SPME and MS-using selective ion monitoring (SIM) was used to detect and quantify dimethylphthalate (DMP), diethylphthalate (DEP) and dipropylphthalate (DPP) in mineral water. In FIMS, a chromatographic silicone septum is the only barrier between ambient and the high-vacuum mass spectrometer, permitting direct introduction of the SPME fiber into the ionization region of the equipment. After their thermal desorption and ionization and dissociation, the extracted phthalates are detected and quantitated by MS. Three types of SPME fibers were screened for best analyte sorption/desorption behaviors: 100 microm polydimethylsiloxane (PDMS), 65 microm polydimethylsiloxane/divinylbenzene (PDMS/DVB) and 65 microm Carbowax/divinylbenzene (CW/DVB). The PDMS/DVB and CW/DVB fibers were then evaluated for precision, and quantitative figures of merit were assessed for extractions using the PDMS/DVB fiber, which displayed the best overall performance. FIMS with the PDMS/DVB fiber allows simple extraction and MS detection and quantitation of DMP in water with good linearity and precision, and at concentrations as low as 3.6 microg L(-1). The LD and LQ of FIMS are below the maximum phthalate concentration allowed by the USEPA for drinking water (6 microg L(-1)).

Glass↗

PubMed2004

Meerwein reaction of phosphonium ions with epoxides and thioepoxides in the gas phase.

Phosphonium ions are shown to undergo a gas-phase Meerwein reaction in which epoxides (or thioepoxides) undergo three-to-five-membered ring expansion to yield dioxaphospholanium (or oxathiophospholanium) ion products. When the association reaction is followed by collision-induced dissociation (CID), the oxirane (or thiirane) is eliminated, making this ion molecule reaction/CID sequence a good method of net oxygen-by-sulfur replacement in the phosphonium ions. This replacement results in a characteristic mass shift of 16 units and provides evidence for the cyclic nature of the gas-phase Meerwein product ions, while improving selectivity for phosphonium ion detection. This reaction sequence also constitutes a gas-phase route to convert phosphonium ions into their sulfur analogs. Phosphonium and related ions are important targets since they are commonly and readily formed in mass spectrometric analysis upon dissociative electron ionization of organophosphorous esters. The Meerwein reaction should provide a new and very useful method of recognizing compounds that yield these ions, which includes a number of chemical warfare agents. The Meerwein reaction proceeds by phosphonium ion addition to the sulfur or oxygen center, followed by intramolecular nucleophilic attack with ring expansion to yield the 1,3,2-dioxaphospholanium or 1,3,2-oxathiophospholanium ion. Product ion structures were investigated by CID tandem mass spectrometry (MS(2)) experiments and corroborated by DFT/HF calculations.

Journal Article↗

PubMed2003

Gas-phase reactions for selective detection of the explosives TNT and RDX.

Highly selective gas-phase reactions with ethyl vinyl ether (EVE) of major electron (EI) and chemical ionization (CI) fragment ions of the explosives TNT and RDX have been uncovered. The fragment ion of m/z 210 from TNT undergoes [4(+)+ 2] cycloaddition with EVE to form an oxo-iminium ion of m/z 282, which dissociates by acetaldehyde loss after a [1,5-H] shift to form a quinolynium ion of m/z 238. The fragment ion of m/z 149 from RDX reacts with EVE by a formal vinylation reaction, that is, the elusive cyclic adduct loses ethanol to yield a nitro-iminium ion of m/z 175, which reacts further with EVE to form a second cyclic product ion of m/z 247. Calculations and MS/MS experiments support the proposed structures. These highly characteristic reactions of diagnostic EI and CI fragment ions improve selectivity for TNT and RDX detection.

Journal Article↗

PubMed2003

Ionic transacetalization with acylium ions: a class-selective and structurally diagnostic reaction for cyclic acetals performed under unique electrospray and atmospheric pressure chemical ionization in-source ion-molecule reaction conditions.

Ionic transacetalization of cyclic acetals with the gaseous (CH3)2NCO+ acylium ion has been performed under unique in-source ion-molecule reaction (in-source IMR) conditions of electrospray (ESI) and atmospheric pressure chemical ionization (APCI). In-source IMR under ESI and APCI greatly expands the range of neutral molecules that can be brought to the gas phase to react by ionic transacetalization, a general, class-selective and structurally diagnostic reaction for cyclic acetals (Moraes, L. A. B.; Gozzo, F. C.; Vainiotalo, P.; Eberlin, M. N. J. Org. Chem. 1997, 62, 5096). Heavier, more polar, and less volatile cyclic acetals than those previously employed in quadrupole collision cells are shown to react efficiently by ionic transacetalization under the ESI and APCI in-source IMR conditions. Tetramethylurea (TMU) acts as an efficient dopant, being co-injected with the acetal in either benzene, toluene, methanol, or water/methanol solutions. Under APCI or ESI, the basic TMU dopant is protonated preferentially, and the labile protonated TMU then undergoes dissociation to (CH3)2NCO+, the least acidic and the most transacetalization-reactive acylium ion so far tested. Under the relatively high-pressure, low-energy collision conditions set to favor associative reactions, (CH3)2NCO+ reacts competitively both with TMU to form acylated TMU and with the acetal via ionic transacetalization to form the respective cyclic ionic acetals. Spectrum subtraction removes the ionic products of the dopant (TMU) self-reactions, thus providing clean ion-molecule reaction product ion mass spectra, which are used for the selective, structurally diagnostic detection of cyclic acetals. Information on ring substituents comes from characteristic mass shifts resulting from aldehyde/ketone by acylium ion replacement. Enhanced selectivity in structural characterization or chemical recognition for cyclic acetal monitoring is gained by performing on-line collision-induced dissociation via tandem mass spectrometric experiments. Most cyclic ionic acetals dissociate exclusively or nearly exclusively to re-form the reactant (CH3)2NCO+ acylium ion whereas the presence of additional functional groups with increased structural complexity tends to favor other specific but likewise selective dissociation channels.

Letter↗

PubMed2003

Gas-phase polar [4+ + 2] cycloaddition with ethyl vinyl ether: a structurally diagnostic ion-molecule reaction for 2-azabutadienyl cations.

The intrinsic reactivity of eight gaseous, mass-selected 2-azabutadienyl cations toward polar [4(+) + 2] cycloaddition with ethyl vinyl ether has been investigated by pentaquadrupole mass spectrometric experiments. Cycloaddition occurs readily for all the ions and, with the only exception of those from the N-acyl 2-azabutadienyl cations (N-acyliminium ions), the cycloadducts are found to dissociate readily upon collision activation (CID) both by retro-Diels-Alder reaction and by a characteristic loss of an ethanol (46u) neutral molecule. Ethanol loss from the intact polar [4(+) + 2] cycloadduct functions therefore as a structurally diagnostic test: 72 u neutral gain followed by 46 u neutral loss, i.e., as a combined ion-molecule reaction plus CID 'signature' for N-H, N-alkyl and N-aryl 2-azabutadienyl cations. The two N-acyliminium ions tested are exceptional as they form intact cycloadducts with ethyl vinyl ether which dissociate exclusively by the retro-Diels-Alder pathway.

Journal Article↗

PubMed2003

Ion/molecule reactions performed in a miniature cylindrical ion trap mass spectrometer.

A recently constructed miniature mass spectrometer, based on a cylindrical ion trap (CIT) mass analyzer, is used to perform ion/molecule reactions in order to improve selectivity for in situ analysis of explosives and chemical warfare agent simulants. Six different reactions are explored, including several of the Eberlin reaction type (M. N. Eberlin and R. G. Cooks, Org. Mass Spectrom., 1993, 28, 679-687) as well as novel gas-phase Meerwein reactions. The reactions include (1) Eberlin transacetalization of the benzoyl, 2,2-dimethyloximinium, and 2,2-dimethylthiooximinium cations with 2,2-dimethyl-1,3-dioxolane to form 2-phenyl-1,3-dioxolanylium cations, 2,2-dimethylamine-1,3-dioxolanylium cations and the 2,2-dimethylamin-1,3-oxathiolanylium cations, respectively; (2) Eberlin reaction of the phosphonium ion CH3P(O)OCH3+, formed from the chemical warfare agent simulant dimethyl methylphosphonate (DMMP), with 1,4-dioxane to yield the 1,3,2-dioxaphospholanium ion, a new characteristic reaction for phosphate ester detection; (3) the novel Meerwein reaction of the ion CH3P(O)OCH3+ with propylene sulfide forming 1,3,2-oxathionylphospholanium ion; (4) the Meerwein reaction of the benzoyl cation with propylene oxide and propylene sulfide to form 4-methyl-2-phenyl-1,3-dioxolane and its thio analog, respectively; (5) ketalization of the benzoyl cation with ethylene glycol to form the 2-phenyl-1,3-dioxolanylium cation; (6) addition/NO2 elimination involving benzonitrile radical cation in reaction with nitrobenzene to form an arylated nitrile, a diagnostic reaction for explosives detection and (7) simple methanol addition to the C7H7+ ion, formed by NO2 loss from the molecular ion of p-nitrotoluene to form an intact adduct. Evidence is provided that these reactions occur to give the products described and their potential analytical utility is discussed.

Chemical Warfare Agents↗

PubMed2003

Solid phase micro-extraction in a miniature ion trap mass spectrometer.

Fiber introduction mass spectrometry (FIMS), a variation of solid-phase microextraction (SPME) and membrane introduction mass spectrometry (MIMS), is employed with a miniature mass spectrometer. The inlet system, constructed of commercially available vacuum parts, allows the direct introduction of the SPME needle vacuum chamber into the mass spectrometer. Thermal desorption of the analyte from the poly(dimethylsiloxane) (PDMS) coated fiber was achieved with a built in nichrome heater, followed by electron ionization of the analytes internal to the cylindrical ion trap (CIT). The system has been tested with several volatile organic compounds (VOC) in air and to analyze the headspace over aqueous solutions, with limits of detection in the low ppb range. The signal rise (10-90%) and fall (90-10%) times for the system ranged from 0.1 to 1 s (rise) and 1.2 to 6 s (fall) using heated desorption. In addition, this method has been applied to quantitation of toluene in benzene, toluene, xylene (BTX) mixtures in water and gasoline. This simple and rapid analysis method, coupled to a portable mass spectrometer, has been shown to provide a robust, simple, rapid, reproducible, accurate and sensitive (low ppb range) fieldable approach to the effective in situ analysis of VOC in various matrices.

Ions↗

PubMed2003

The kinetic method as a structural diagnostic tool: ionized alpha-diketones as loosely one-electron bonded diacylium ion dimers.

The kinetic method is used to corroborate the description of ground state ionized alpha-diketones as loosely electron-bonded acylium ion dimers: R(1)-C=O(+)---e(-)---(+)O=C-R(2). The abundance ratio of both the acylium ion fragments R(1)CO(+) and R(2)CO(+) (summed to those of their respective secondary fragments) formed upon low energy (5 eV) collision-induced dissociation of several ionized alpha-diketones is found to correlate linearly with the ionization energies (IEs) of the corresponding R(1)CO(.) and R(2)CO(.) free radicals as predicted by density functional theory calculations at the B3LYP/6-311++G(d,p) level. However, when these abundances are taken from 70 eV electron ionization mass spectra, lower and sometimes inverted ratios (2,3-pentanedione and 2,3-hexanedione) are observed. Inverted ratios are also observed via charge-exchange mass spectrometry/mass spectrometry (MS/MS) experiments for ionized 2,3-pentanodione formed with relatively high internal energies. Ionized alpha-diketones are found to display an effective temperature of 1705 K, which indicates an intermediate loosely-bonded nature. B3LYP/6-311++G(d,p) optimized geometries and charge and spin densities also corroborate the description of ground state ionized alpha-diketones as loosely electron-bonded diacylium ion dimers.

Journal Article↗

PubMed2002

Atmospheric pressure photoionization mass spectrometry. Ionization mechanism and the effect of solvent on the ionization of naphthalenes.

The ionization mechanism in dopant-assisted atmospheric pressure photoionization and the effect of solvent on the ionization efficiency was studied using 7 naphthalenes and 13 different solvent systems. The ionization efficiency was 1-2 orders of magnitude higher with dopant than without, indicating that the photoionization of the dopant initiates the ionization process. In positive ion mode, the analytes were ionized either by charge exchange or by proton transfer. Charge exchange was favored for low proton affinity solvents (water, hexane, chloroform), whereas the addition of methanol or acetonitrile to the solvent initiated proton transfer. In negative ion mode, the compounds with high electron affinity were ionized by electron capture or by charge exchange and the compounds with high gas-phase acidity were ionized by proton transfer. In addition, some oxidation reactions were observed. All the reactions leading to ionization of analytes in negative ion mode are initiated by thermal electrons formed in photoionization of toluene. The testing of different solvents showed that addition of buffers such as ammonium acetate, ammonium hydroxide, or acetic acid may suppress ionization in APPI. The reactions are discussed in detail in light of thermodynamic data.

Atmospheric Pressure↗

PubMed2002

Fiber introduction mass spectrometry: fully direct coupling of solid-phase microextraction with mass spectrometry.

This work describes the first fully direct coupling of solid-phase microextraction (SPME) with mass spectrometry. An inlet system using a septum as the only interface between the ambient and the high-vacuum mass spectrometer was constructed to allow the introduction of the SPME needle directly into the ionization region of a mass spectrometer. The PDMS-coated fiber was then placed and exposed exactly between the two ionization filaments. Uniform heating of the fiber, efficient thermal desorption, and electron ionization of the analytes were achieved. Using this new analytical technique, here termed fiber introduction mass spectrometry (FIMS), we have been able to detect and quantitate several volatile (VOC) and semivolatile (SVOC) organic chemicals (carbon tetrachloride, benzene, toluene, xylenes, gamma-terpinene, diisoamyl ether, chlorobenzene, and many PAHs) and two herbicides (Sylvex and its methyl ether) from aqueous solutions at low-ppb to ppt levels using either SPME headspace or solution extraction. FIMS shows high sensitivity (ng/L), good reproducibility, and accuracy, providing therefore a simple and effective approach to rapid analysis of VOC and SVOC in various matrixes.

Chemistry Techniques, Analytical↗

PubMed2002

Mono and double polar [4 + 2(+)] Diels-Alder cycloaddition of acylium ions with O-heterodienes.

Gas-phase reactions of acylium ions with alpha,beta-unsaturated carbonyl compounds were investigated using pentaquadrupole multiple-stage mass spectrometry. With acrolein and metacrolein, CH(3)-C(+)(double bond)O, CH(2)(double bond)CH-C(+)(double bond)O, C(6)H(5)-C(+)(double bond)O, and (CH(3))(2)N-C(+)(double bond)O react to variable extents by mono and double polar [4 + 2(+)] Diels-Alder cycloaddition. With ethyl vinyl ketone, CH(3)-C(+)(double bond)O reacts exclusively by proton transfer and C(6)H(5)-C(+)(double bond)O forms only the mono cycloadduct whereas CH(2)(double bond)CH-C(+)(double bond)O and (CH(3))(2)N-C(+)(double bond)O reacts to great extents by mono and double cycloaddition. The positively charged acylium ions are activated O-heterodienophiles, and mono cycloaddition occurs readily across their C(+)(double bond)O bonds to form resonance-stabilized 1,3-dioxinylium ions which, upon collisional activation, dissociate predominantly by retro-addition. The mono cycloadducts are also dienophiles activated by resonance-stabilized and chemically inert 1,3-dioxonium ion groups, hence they undergo a second cycloaddition across their polarized C(double bond)C ring double bonds. (18)O labeling and characteristic dissociations displayed by the double cycloadducts indicate the site and regioselectivity of double cycloaddition, which are corroborated by Becke3LYP/6-311++G(d,p) calculations. Most double cycloadducts dissociate by the loss of a RCO(2)COR(1) molecule and by a pathway that reforms the acylium ion directly. The double cycloadduct of the thioacylium ion (CH(3))(2)N-C(+)(double bond)S with acrolein dissociates to (CH(3))(2)N-C(+)(double bond)O in a sulfur-by-oxygen replacement process intermediated by the cyclic monoadduct. The double cycloaddition can be viewed as a charge-remote type of polar [4 + 2(+)] Diels-Alder cycloaddition reaction.

Acetals↗