Search PubMed⌕ Search

Biomedical subjects

E P Berg

Publications and source records attributed to E P Berg.

At least 19 recordsLinked to original sources

Serum hormone concentrations relative to carcass composition of a random allotment of commercial-fed beef cattle.

Cattle (n = 995 steers and 757 heifers) were randomly selected from a commercial abattoir (Emporia, KS) to determine the relationships between USDA quality and yield grade characteristics and serum concentrations of leptin, IGF-I, and GH. Animals were randomly selected postexsanguination on the slaughter line on 4 occasions (March, May, August, and January). Blood was collected at exsanguination and transported to the University of Missouri for analysis. Sex and hide color were recorded. Carcass data included HCW, 12th-rib fat thickness, KPH, LM area, and marbling score, which were collected from each carcass approximately 24 h postmortem. Average serum leptin concentrations were greater (P = 0.008) for heifers (11.9 ng/mL) than steers (10.9 ng/mL). Heifers had lighter carcasses (331.9 vs. 352.2 kg, P < 0.001), greater 12th-rib fat measurements (1.3 vs. 1.1 cm, P < 0.001), greater KPH (2.5 vs. 2.4%, P < 0.001), and more marbling (Small(40) vs. Small(10), P < 0.001) than steers. Positive correlations (P < 0.01) existed between leptin concentration and marbling score (r = 0.28), 12th-rib fat depth (r = 0.37), KPH (r = 0.23), and USDA yield grade (r = 0.32). Negative correlations were found between leptin and IGF-I (r = -0.11; P < 0.001) and leptin and GH (r = -0.32; P < 0.001). Negative correlations (P < 0.01) were observed for IGF-I and KPH (r = -0.23) and marbling score (r = -0.20), whereas GH was most highly negatively correlated with KPH (r = -0.23; P < 0.001). Leptin concentration accounted for variation (P < 0.001) in a model separating least squares means across USDA quality grade, separating USDA standard (8.5 ng/mL), select (10.3 ng/mL), low choice (12.2 ng/mL), and upper 2/3 choice/prime (>12.9 ng/mL) carcasses. There was no difference (P = 0.31) observed in leptin concentrations between the upper 2/3 choice and prime carcasses (12.9 and 14.2 ng/mL, respectively). Relationships within endocrine profiles and between endocrine concentrations and carcass quality characteristics may prove to be a useful tool for the prediction of beef carcass composition.

Abattoirs↗

Pork quality attributes associated with bilateral carcass variation.

The objective of this study was to identify bilateral differences in pork carcass quality as influenced by single leg shackling and suspension of electrically stunned pigs. Fifty-six Genepacker x EB market barrows (118 kg) were rendered unconscious and insensible to pain via electrical stimulation. Pigs were then shackled and suspended by the right hind leg before exsanguination and remained suspended until scalding. Initial (45-min) pH values of the LM at the 10th to 11th rib interface were different (P = 0.016); shackled side loins possessed a greater i.m. pH than those loins associated with the free side of the carcass (6.26 vs. 6.10). At 24 h postmortem, loins from the shackled side had lower (P < 0.001) L* values than loins from the free side in both the sirloin (53.08 vs. 57.61) and blade (54.61 vs. 57.09) regions. Additionally, b* values were greater (P < 0.001) for loins from the shackled side than loins from the free side in the center (13.81 vs. 13.01) and blade (14.72 vs. 13.68) regions, and in the blade region, a* values were greater (P < 0.001) in the LM from the shackled side than loins from the free side (7.37 vs. 6.26). Moreover, LM chops of loins from the shackled side that were aged 21 d were rated less (P < 0.05) tough (2.74 vs. 3.95) and more (P < 0.05) juicy (4.24 vs. 3.19) than chops from the free-hanging side. However, these differences were not evident after 41 d aging. From the results of this study, it can be concluded that bilateral differences exist within the LM of a pork carcass and that these differences are likely associated with the single-leg shackling and suspension of electrically stunned pigs.

Abattoirs↗

Growth performance, carcass composition, quality, and enhancement treatment of fresh pork identified through deoxyribonucleic acid marker-assisted selection for the Rendement Napole gene.

Progeny (n = 70) from unrelated, DNA tested, Rendement Napole carrier (RN-/rn+) Hampshire sires, and DNA tested, Rendement Napole normal (rn+/rn+) Yorkshire dams were genotyped for the segregating RN- allele via DNA marker-assisted methodology. Six slaughter groups ensued, with littermates all being represented within the same slaughter group. Boneless pork loins were removed from right carcass sides after a 48-h chill at 2 degrees C. The anterior portions of the loins were not enhanced, whereas the posterior sections were enhanced with a solution containing 0.5% sodium chloride and 0.5% sodium tripolyphosphate to 110% of their initial weight. Carcasses of carrier pigs had less (P < 0.05) 10th rib fat depth and a greater (P < 0.01) percentage carcass lean than carcasses of normal pigs. Postmortem LM pH of carrier pigs was lower (P < 0.002) at 3, 6, 12, and 24 h, and tended to be lower (P = 0.062) at 48 h compared with that of normal animals. Samples of LM from carrier pigs had greater (P < 0.01) glycolytic potential values, drip loss percentages, and a* values, and lower pH values at fabrication than LM from normal pigs. No genotype differences (P > 0.05) were found for LM lactate, L*, or b* values. Nonenhanced semimembranosus samples from carrier pigs exhibited greater (P < 0.05) purge loss percentages and L* values, and lower (P < 0.01) pH values than samples from normal pigs. Enhanced LM samples exhibited greater (P < 0.05) drip and purge loss percentages, greater pH, and lower L* values at fabrication, regardless of Napole status. These findings suggest that the Napole gene has a positive influence on carcass leanness but detrimental effects for lean quality, which were often further compounded when meat was subjected to enhancement treatment.

Animals↗

Growth rate, body composition, and meat tenderness in early vs. traditionally weaned beef calves.

One hundred forty spring-born Angus x Gelbvieh and purebred Angus steers were selected for study as early weaned (EW; average age at weaning = 90 +/- 30 d) or traditionally weaned (TW; average age at weaning = 174 +/- 37 d) steers that were non-implanted or implanted (Synovex-S, Fort Dodge Animal Health, Overland Park, KS). Initially, steers were sorted by age, sire, and farm, and then allotted randomly in a 2 x 2 factorial arrangement of treatments of EW implanted (EWI), EW nonimplanted (EWN), TW implanted (TWI), or TW nonimplanted (TWN). Ultrasound measurements (US) of LM area (LMA), 12th rib fat thickness (US-BF), and marbling (US-M) were collected every 28 d during the time that steers were on feed. At 202 d of age, EW calves had larger US-LMA, US-BF, and BW than TW calves (37.9 vs. 32.3 cm2, 0.38 vs. 0.26 cm, and 271.6 vs. 218.9 kg, respectively; P < 0.001). At slaughter, EW calves had heavier HCW (290.4 vs. 279.7 kg, respectively; P < 0.05) and greater USDA marbling scores (51.25 vs. 46.26, respectively; P < 0.05) than TW calves; more EW steers graded USDA Choice or greater (P = 0.05). However, no differences were detected in BW (P = 0.15), LMA (P = 0.39), BF (P = 0.45), or liver abscess scores (P = 0.41). Twenty-four implanted steers were selected from the original group of 140 and sorted into two slaughter groups of 12. Twelve implanted steers from each weaning group, matched in slaughter BW but differing in age, were subsampled at slaughter to assess the effect of weaning age and chronological age on muscle tenderness. Younger animals had lower Warner-Bratzler shear force values (P < 0.001) than older calves after 14 d of postmortem aging; however, no differences were found in tenderness after 21 d of aging. Furthermore, there was greater variance (P < 0.001) in Warner-Bratzler shear force values among younger, EW steers vs. older, TW steers. These data provide evidence that early weaning of beef calves may be used as a tool to more effectively manage the cow-calf production system without compromising the quality of the offspring.

Aging↗

Diet modifications to improve finishing pig growth performance and pork quality attributes during periods of heat stress.

A total of 196 barrows (88 kg) were used in a 2 x 2 factorial arrangement of treatments and housed in a facility (seven pigs per pen) where temperatures cycled between 27 and 35 degrees C. Treatments consisted of (as-fed basis) two CP levels (13.6 or 11.3%) and two levels of added fat (1 or 8%). Diets were formulated to the same true digestible lysine:ME ratio (1.68 g of lysine/Mcal of ME). Diets were fed and growth variables were measured until pigs reached 114 kg of BW. Ham and LM (loin) 24-h pH (PH24), and light reflectance (CIE L*, and a*, and b*, and hue angle) were taken after slaughter. Additionally, loins were removed and measured for i.m. fat, moisture, glycolytic potential, and subjected to a 7-d retail display evaluation that measured pH, light reflectance, and subjective color and odor score. The remaining boneless lumbar loin segment was vacuum-sealed for 14 d and subsequently measured for pH, light reflectance, and color. Pigs fed the high-CP, low-fat diet had a lower ADG than all other treatments (P = 0.06). High-fat feeding resulted in improved ADG (CP x Fat; P = 0.06) and G:F (Fat effect; P < 0.01). Higher fat and lower protein levels both increased final BF (P = 0.07). Pigs fed the low-CP diets had lower ham PH24 (P < 0.01). Loin PH24 was higher with high fat feeding (P = 0.10). Additionally, pigs fed high fat diets had lower L* values on the ham face and cut loin 24 h after slaughter (Fat effect; P <or= 0.02). These loin color differences were maintained through the 7-d retail display and 14-d storage period. There were no differences in loin i.m. fat or moisture content; however, high-fat feeding tended to decrease loin glycolytic potential (P = 0.11). These results suggest that in a hot environment, decreased CP content improved finishing pig ADG when dietary fat supplementation was low. High dietary fat inclusion during heat stress improved ADG and G:F, especially when CP level was elevated. High-fat diets fed in a hot environment increased pork color intensity by decreasing the glycolytic potential at slaughter and elevating muscle pH.

Adipose Tissue↗

The effects of the antioxidant lipoic acid on beef longissimus bloom time.

The objective of this study was to evaluate the influence of lipoic acid (LA) on beef LM steak bloom time, as well-as to characterize bloom time in the CIE L*, a*, and b* color space over a 93-min period. Thirty-two Simmental steers were supplemented with LA for 21 d immediately before slaughter at levels of 0, 8, 16, or 24 mg of LA/kg BW (eight steers per treatment). Lipoic acid was mixed with liquid paraffin, allowed to solidify, prilled, and top-dressed over a standard finishing diet. Steers were slaughtered at the University of Missouri abattoir in four groups of eight (two steers per treatment) over a 2-wk period. After a 24-h chill at 4 degrees C, the right LM was removed from each carcass. One 2.54cm steak was removed from the anterior portion of the LM, and its color characteristics (CIE L*, a*, and b*) were measured immediately with a standardized spectrocolorimeter. Color measurements were taken every 3 min thereafter for a total of 93-min. Hue angle (true red) and chroma (color saturation) were calculated from the color measurements. Addition of LA to the diet had no effect on bloom time (P = 0.67). When treatment means were analyzed, the addition of 24 mg of LA/kg BW to the diet resulted in higher (lighter) L* values (P < 0.05) compared with other treatments, whereas the addition of 16 mg of LA/kg BW to the diet caused lower hue angles (more true red; P < 0.05) when compared with other treatments. Addition of LA to the diet did not affect a* (P = 0.13) and b* (P = 0.18) values or chroma (P = 0.62). In the absence of treatment effects, bloom times for all treatments were pooled, and L* values did not change (P > 0.05) during the 93-min bloom time; however, a* and chroma values increased for 9 min and plateaued after 12 min (P < 0.01). Similarly, b* values increased (P < 0.01) for the first 6 min, and after 9 min, no further increase in yellowness was detected. Bloom time had little effect on hue angle, which stabilized after 3 min. Supplementing steers with the antioxidant LA for 21 d had no effect on the bloom time of beef LM; however, higher levels of supplemental LA affected L* values and hue angles of beef.

Animal Husbandry↗

The effect of dietary ractopamine concentration and duration of feeding on growth performance, carcass characteristics, and meat quality of finishing pigs.

A total of 400 barrows from Dekalb EB and 83 terminal sires mated to 43 and 45 maternal lines were used to evaluate the effects of dietary ractopamine (RAC; Paylean, Elanco Animal Health, Greenfield, IN) concentrations (0, 5, 10, or 20 ppm; as-fed basis) and feeding durations (6 to 34 d) on growth, efficiency, carcass, and meat quality characteristics of finishing pigs. Barrows were weighed and sorted into five weight blocks, each block consisting of 16 pens (five pigs per pen). Weight blocks were allocated to feeding duration treatments and assigned consecutively by weight from lightest to heaviest to represent 34, 27, 20, 13, and 6 d on test, respectively. The lightest and heaviest blocks averaged 79.8 and 103.8 kg, respectively, at the start of the test. Within a weight block, pens (four per treatment) were randomly assigned to one of four dietary concentrations of RAC in a basal diet containing 18.5% CP and 1.13% lysine. The experiment-wide target slaughter weight was 109 kg, and pigs and feeders were weighed weekly. Weight blocks (80 barrows per block) were slaughtered at a commercial packing plant after 6, 13, 20, 27, or 34 d on test. Overall, RAC supplementation improved (P < 0.05) ADG; however, ADG was not different (P > 0.08) from controls for pigs fed 5, 10, and 20 ppm RAC for 27, 34, and 6 d, respectively. During each feeding period, RAC-fed pigs had improved (P < 0.05) G:F, and, after 20, 27, and 34 d on test, pigs fed 20 ppm RAC had greater (P < 0.05) G:F compared with those fed 0 or 5 ppm RAC. Hot carcass weight was increased (P < 0.05) by RAC feeding after 13 and 27 d of feeding, and by feeding 10 and 20 ppm RAC after 20 d of feeding. After 34 d, pigs fed 20 ppm RAC had heavier (P < 0.05) hot carcass weight than pigs fed 10 ppm RAC. Fat-free lean estimates and the 10th-rib LM area were increased (P < 0.05) by feeding 10 and 20 ppm RAC after 27 d, and by feeding 20 ppm RAC after 34 d compared with controls. Japanese and American color scores, as well as L*, a*, and b* values of the LM, were not affected (P > 0.11) by 5 and 10 ppm RAC compared with controls during each feeding period. Visual marbling score for the LM was decreased (P < 0.05) when RAC was fed at 10 and 20 ppm compared with 0 ppm RAC when fed for 34 d. Dietary RAC improved growth performance at all feeding durations, whereas carcass composition was improved at longer feeding durations. In addition, 5 and 10 ppm RAC did not affect objective and subjective measures of pork quality.

Adrenergic beta-Agonists↗

Evaluation of procedures to predict fat-free lean in swine carcasses.

The objectives were to develop equations for predicting fat-free lean in swine carcasses and to estimate the prediction bias that was due to genetic group, sex, and dietary lysine level. Barrows and gilts (n = 1,024) from four projects conducted by the National Pork Board were evaluated by six procedures, and their carcass fat-free lean was determined. Pigs of 16 genetic groups were fed within weight groups one of four dietary regimens that differed by 0.45% in lysine content and slaughtered at weights between 89 and 163 kg. Variables in equations included carcass weight and measures of backfat depth and LM. Fat-free lean was predicted from measures of fat and muscle depth measured with the Fat-O-Meater (FOM), Automated Ultrasonic System (AUS), and Ultrafom (UFOM) instruments, carcass 10th-rib backfat and LM area (C10R), carcass last-rib backfat (CLR), and live animal scan of backfat depth and LM area with an Aloka 500 instrument (SCAN). Equations for C10R (residual standard deviation, RSD = 2.93 kg) and SCAN (RSD = 3.06 kg) were the most precise. The RSD for AUS, FOM, and UFOM equations were 3.46, 3.57, and 3.62 kg, respectively. The least precise equation was CLR, for which the RSD was 4.04 kg. All procedures produced biased predictions for some genetic groups (P < 0.01). Fat-free lean tended to be overestimated in fatter groups and underestimated in leaner ones. The CLR, FOM, and AUS procedures overestimated fat-free lean in barrows and underestimated it in gilts (P < 0.01), but other procedures were not biased by sex. Bias due to dietary lysine level was assessed for the C10R, CLR, FOM, and SCAN procedures, and fat-free lean in pigs fed the lowlysine dietary regimen was overestimated by CLR, FOM, and SCAN (P < 0.05). Positive regressions of residuals (measured fat-free lean minus predicted fat-free lean) on measured fat-free lean were found for each procedure, ranging from 0.204+/-0.013 kg/kg for C10R to 0.605+/-0.049 kg/kg for UFOM, indicating that all procedures overestimated fat-free lean in fat pigs and underestimated it in lean pigs. The pigs evaluated represent the range of variation in pigs delivered to packing plants, and thus the prediction equations should have broad application within the industry. Buying systems that base fat-free lean predictions on measures of carcass fat depth and muscle depth or area will overvalue fat pigs and undervalue lean pigs.

Adipose Tissue↗

Short- and long-term influence of perinatal dexamethasone treatment on swine growth.

The objective was to evaluate the effects of perinatal dexamethasone (Dex) treatment on postnatal growth in pigs. Experiment 1: 42 piglets were assigned according to birth weight and sex to receive either Dex (1 mg/kg body weight) or sterile saline (Control; equivalent volume) i.m. within 1h of birth. Body weights were recorded weekly and at sacrifice (day 18). Birth weights (1.43 +/- 0.05 kg) did not differ between treatment groups (P > 0.19). At day 18, Dex pigs were heavier than Control pigs (5.46 +/- 0.24 and 4.45 +/- 0.26 kg, respectively). Serum IGF-1 was 17.3% higher in Dex pigs (P < 0.04) compared to Controls. For serum GH, there was a treatment x sex interaction (P < 0.04) with GH being 51% lower in Dex males compared to Control males, and no differences in females. Experiment 2: 71 pigs were assigned according to birth weight and sex to receive either Dex (2 mg/kg body weight) or sterile saline (Control; equivalent volume) i.m. within 1 h of birth. Body weights were recorded weekly until weaning (day 21) and then every 14th day until market weight. Birth weights (1.53 +/- 0.03 kg) did not differ (P > 0.35) between treatment groups or sexes. Dexamethasone increased growth from birth to market weight by 4.15%. Carcass weights were not different (P > 0.34) between Dex (89.9 +/- 1.17 kg) and Control pigs (88.6 +/- 1.36 kg). Overall, Dex enhanced growth in pigs from birth to market weight with minimal effects on carcass and meat quality.

Aging↗

Creatine monohydrate supplemented in swine finishing diets and fresh pork quality: III. Evaluating the cumulative effect of creatine monohydrate and alpha-lipoic acid.

The objective of this study was to evaluate short-duration supplementation of alpha-lipoic acid (ALA) and creatine monohydrate (CMH) to improve fresh pork quality. Forty-eight commercial hybrid barrows were blocked by BW and randomly allotted to one of four treatments: 1) no CMH or ALA; 2) supplementation of 24 g of CMH(-1) x pig(-1) x d(-1); 3) supplementation of 600 mg ALA(-1) x pig(-1) x d(-1); or 4) combined CMH and ALA supplements. Twelve pigs per treatment were individually penned with ad libitum access to water and a finishing diet. Treatments were hand-fed to individual pigs daily (divided into three equal doses) for 5 d before slaughter at 113 kg BW in two separate groups of 24 pigs each. Intramuscular pH was recorded at 45 min postmortem and again at 24 h in the ham semimembranosus (SM) and the longissimus muscle (LM) between the 10th and 11th rib. A Meatcheck (SFK Technology, Peosta, IA) conductivity probe was inserted in the same anatomical locations as pH measurement, providing an index value (PY) from 0 to 100 (a higher index value indicates more intact muscle cells and higher water-holding capacity). Color (L, a, b values) measurements were obtained at 24 h postmortem on the ham gluteus medius (GM), SM, and LM. Two 2.54-cm-thick loin chops were removed from the loin for determination of Warner-Bratzler shear force and glycolytic potential. The intact SM and the posterior portion of the boneless loin were vacuum-packaged and stored for 7 d to determine purge loss. Creatine-supplemented pigs had a higher (P = 0.03) PY value in the SM (66.67) at 45 min postmortem than either ALA, singularly (63.50), or in the combined CMH/ALA (62.27) treatments. (A higher PY index indicates superior water-holding capacity.) Lipoic acid supplementation resulted in the highest pH at 45 min (P = 0.029). These results justify further evaluation of the potential positive influence of supplementing alpha-lipoic acid to improve pork quality.

Animal Feed↗

Serum concentrations of leptin in six genetic lines of swine and relationship with growth and carcass characteristics.

The objective of this study was to evaluate the relationship between serum concentrations of the hormone leptin with growth and carcass traits insix distinct breeds of pigs entered into the 2000 National Barrow Show Sire Progeny Test. Breeds evaluated were Berkshire (n = 131), Chester White (n = 33), Duroc (n = 40), Landrace (n = 23), Poland China (n = 26), and Yorkshire (n = 41). Serum samples were collected and assayed for concentrations of leptin at entry into test (On-Test Leptin) at 34 +/- 6.7 kg of live weight and again 24 h prior to harvest (Off-Test Leptin) at 111 +/- 3.1 kg of live weight. Carcass measurements taken included hot carcass weight, carcass length, backfat, longissimus muscle area (LMA), longissimus pH, Hunter L-value, chemically determined intramuscular fat (IMF), and subjective color, marbling, and firmness scores. Average daily gain, IMF percentages, and water-holding capacity (WHC) were also determined. On-Test Leptin concentrations were not different (P > 0.10) between swine breeds; however, Off-Test Leptin concentrations did differ (P < 0.001) across genotype. Berkshire had the greatest Off-Test Leptin concentrations (6.58 +/- 0.43 ng/mL), and Duroc and Yorkshire had the lowest (3.49 and 3.96 +/- 0.68 ng/mL; respectively). In addition, Off-Test Leptin concentrations were correlated with average daily gain (r = 0.29; P < 0.001), last-rib fat thickness (r = 0.48; P < 0.001), 10th rib backfat (r = 0.52; P < 0.001), LMA (r = -0.33; P < 0.001), percent fat-free carcass lean (r = -0.51; P < 0.001), and WHC (r = 0.15; P < 0.05). Off-Test Leptin concentrations also differed by gender, with barrows having greater (P < 0.001) serum concentrations of leptin than gilts (6.55 +/- 0.48 vs 3.35 +/- 0.44). Differences exist between breeds of pigs in a manner consistent with breed-specific traits for growth, leanness, and quality; thus, leptin may serve as a useful marker for selection or identification of specific growth and carcass traits.

Adipose Tissue↗

Creatine monohydrate supplementation and the quality of fresh pork in normal and halothane carrier pigs.

The objective of this research was to examine the impact of supplementation with creatine monohydrate (CMH) on the quality of various muscles from normal and heterozygous halothane carrier pigs. Twenty-nine crossbred pigs, 16 normal (NN) and 13 halothane carrier (Nn) genotypes, were supplemented with 0 or 25 g x pig(-1) x d(-1) of CMH for 5 d before slaughter. Supplemented pigs gained 2.26 kg more weight (P < 0.05) during 5 d of supplementation. There were trends (P < 0.10) toward higher objective marbling scores and lower cooking loss for supplemented pigs. The 45-min pH was 0.27 units higher (P < 0.05) for supplemented pigs in the semimembranosus; CMH supplementation did not influence (P > 0.05) drip loss or muscle composition. Supplementation with CMH also resulted in lower L* values in two ham muscles, semitendinosus (5.15 units) (P < 0.05) and semimembranosus (1.95 units) (P < 0.10) for Nn carcasses. Genotype had significant effects on most quality indicators, with Nn carcasses producing lower-quality lean as evidenced by less desirable subjective and objective color and higher drip losses. Genotype also affected the composition of several muscles, with the NN carcasses having more fat and less moisture.

Animal Feed↗

Creatine monohydrate supplemented in swine finishing diets and fresh pork quality: I. A controlled laboratory experiment.

Creatine monohydrate (CMH) was fed during the final stage of growth to determine its effects on fresh pork quality. Twenty-four Duroc-sired market hogs (107 kg) were individually penned and fed a corn-soybean finishing diet containing 0.55% lysine with 2% added choice white grease. Treatments consisted of a control diet (control) tested against two durations of CMH-supplemented diets (25 g CMH x pig(-1) x d(-1)) fed for 5 (5 d) or 10 (10 d) d before slaughter. Eight pigs were used per treatment. Pigs were slaughtered on day 11 of treatment (118 kg). Postmortem pH was measured in the loin (10th rib) and ham semimembranosus at 45 min (pH1) and 24 h (pH2). At 24 h, Hunter L* values were taken at the 10th rib and the ham semimembranosus. At 48 h, drip loss was determined from the loin (8th rib) and semimembranosus. Percentage of moisture, crude fat, and crude protein were determined for loin (9th rib) and semimembranosus. Treatment 2 semimembranosus tended to have a higher pH1 (P = 0.083) and pH2 (P = 0.05) than controls. Although not statistically different, 10 d semimembranosus had the highest proportion of moisture and lowest CP:moisture ratio, suggesting greater myofiber hydration. No statistical differences were detected across treatments for loin pH1, pH2, CP:moisture, or drip loss. Loins and semimembranosus from 5 d pigs had a numerically higher proportion of chemically determined i.m. fat, suggesting optimal intramuscular creatine phosphate saturation may allow for more energy to be stored as i.m. fat. Standard deviations of ham L* value means for 5 d (SD = 2.53) and 10 d (SD = 2.05) were 26 and 48% lower than controls (SD = 3.95). Standard deviations of loin L* value for 5 d (SD = 2.53) and 10 d (SD = 2.53) were 51 and 64% lower than controls (SD = 1.86). These results suggest that CMH supplementation buffers early postmortem and ultimate pH decline in the semimembranosus, which may reduce 48-h moisture loss.

Animal Feed↗

Creatine monohydrate supplemented in swine finishing diets and fresh pork quality: II. Commercial applications.

The objectives of this study were to determine the value of supplementing creatine monohydrate (CMH) in a complete swine finishing ration and determining its effects on meat quality. Crossbred barrows (n = 59) were allotted five pens per treatment with three pigs per pen. Dietary treatments, including 20 g CMH x pig(-1) x d(-1) fed for 5, 10, or 15 d before slaughter, were compared to control pigs that received no CMH. The basal diet was a corn-soybean meal finishing diet. At 123.5 kg, pigs were delivered to a commercial packing plant (80 km) and slaughtered according to industry practices. After a 24-h chill at 4 degrees C, right-side loins were collected from the fabrication line and vacuum-packaged for delivery to the University of Missouri Meat Lab. Hams were scanned for lean content by a primal cut electromagnetic scanner. After scanning, ham pH and light reflectance (L*, a*, b*) were obtained on the gluteus medius muscle. Loin pH and light reflectance were obtained at the 10/11th-rib juncture. The posterior section of the boneless loin was weighed, vacuum-packaged, and stored for 7 d at 1 degree C. After aging, light reflectance, weights, and Warner/Bratzler shear force measurements were taken. A linear trend (P = 0.071) was observed for ham 24-h L* values, and a cubic trend was observed for ultimate loin pH (P = 0.102). Hunter L* values of the longissimus possessed a negative linear contrast (P = 0.009) after aging, revealing that the loins of those animals treated for 10 and 15 d exhibit higher L* values. A cubic trend (P = 0.057) was shown for percentage of moisture lost as purge; 5- and 10-d treatments were intermediate to control and 15-d treatments. Warner/Bratzler shear force measurements for chops aged 7 d increased in a linear fashion (P = 0.024). This data suggests that 5-d supplementation of CMH before slaughter improves several pork quality attributes. However, it seems that supplementing CMH in swine diets for 10 or 15 d could reduce the quality of fresh pork.

Aging↗

Total body electrical conductivity (TOBEC) measurement of compositional differences in hams, loins, and bellies from conjugated linoleic acid (CLA)-fed stress-genotype pigs.

This study was designed to observe the effects of conjugated linoleic acid (CLA) supplementation on lean content of pork carcass primal cuts (hams, loins, and bellies) and to determine the ability of total body electrical conductivity (TOBEC) to predict lean content. A total of 64 crossbred growing-finishing barrows were placed on a control (soybean oil) or CLA (0.75%) diet at an average weight of 40 kg. Pigs were penned in pairs according to diet and stress genotype (negative, carrier, and positive) and slaughtered at 115 kg. Stress genotype was included because of known variations in lean content. Hams (IMPS 401A; n = 64), loins (IMPS 410; n = 24), and bellies (IMPS 408; n = 63) were fabricated from carcasses at 24 h postmortem and scanned for electromagnetic (EM) absorption by a MQ-25 EM scanner. Each wholesale cut was scanned in triplicate at 2.5 MHz to yield a peak mean average (PMA) value then separated into lean, fat, bone, and skin components. Bellies were skinned prior to scanning then subjected to a belly bar firmness test before dissection. Supplementation with CLA had no effect (P > 0.05) on lean ham composition. Regression analysis was used for lean weight prediction using primal weight and PMA value as predictors. Lean content prediction of hams by TOBEC resulted in an R2 of 0.80. Loins from CLA-supplemented pigs exhibited increased lean weight (P < 0.05) and PMA values (P < 0.05) compared to controls. Lean prediction of loins by TOBEC resulted in an R2 of 0.66. Bellies from CLA-supplemented pigs had a higher percentage of moisture (P < 0.03) and protein (P < 0.01) and decreased percentage of lipid (P < 0.01). The R2 values from the regression analysis predicting protein, moisture, protein + moisture, and fat-free soft tissue composition of the skinless bellies were 0.67, 0.68, 0.71, and 0.78, respectively.

Animals↗

Using current on-line carcass evaluation parameters to estimate boneless and bone-in pork carcass yield as influenced by trim level.

The objective of this study was to develop prediction equations for estimating proportional carcass yield to a variety of external trim levels and bone-in and boneless pork primal cuts. Two hundred pork carcasses were selected from six U.S. pork processing plants and represented USDA carcass grades (25% USDA #1, 36% USDA #2, 25% USDA #3, and 14% USDA #4). Carcasses were measured (prerigor and after a 24 h chill) for fat and muscle depth at the last rib (LR) and between the third and fourth from last rib (TH) with a Hennessy optical grading probe (OGP). Carcasses were shipped to Texas A&M University, where one was randomly assigned for fabrication. Selected sides were fabricated to four lean cuts (ham, loin, Boston butt, and picnic shoulder) then fabricated progressively into bone-in (BI) and boneless (BL) four lean cuts (FLC) trimmed to .64, .32, and 0 cm of s.c. fat, and BL 0 cm trim, seam fat removed, four lean cuts (BLS-OFLC). Total dissected carcass lean was used to calculate the percentage of total carcass lean (PLEAN). Lean tissue subsamples were collected for chemical fat-free analysis and percentage carcass fat-free lean (FFLEAN) was determined. Longissimus muscle area and fat depth also were collected at the 10th and 11th rib interface during fabrication. Regression equations were developed from linear carcass and OGP measurements predicting FLC of each fabrication point. Loin muscle and fat depths from the OPG obtained on warm, prerigor carcasses at the TH interface were more accurate predictors of fabrication end points than warm carcass probe depth obtained at the last rib or either of the chilled carcass probe sites (probed at TH or LR). Fat and loin muscle depth obtained via OGP explained 46.7, 52.6, and 57.1% (residual mean square error [RMSE] = 3.30, 3.19, and 3.04%) of the variation in the percentage of BI-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively, and 49.0, 53.9, and 60.7% (RMSE = 2.91, 2.81, and 2.69%) of the variation in the percentage of BL-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively. Fat and loin muscle depth from warm carcass OGP probes at the TH interface accounted for 62.4 and 63.5% (RMSE = 3.38 and 3.27%) of the variation in PLEAN and FFLEAN, respectively. These equations provide an opportunity to estimate pork carcass yield for a variety of procurement end point equations using existing on-line techniques.

Animals↗

Pork carcass composition derived from a neural network model of electromagnetic scans.

We used an advanced computer logic system (NETS 3.0) to decipher electromagnetic (EM) scans in lieu of traditional linear regression for estimation of pork carcass composition. Fifty EM scans of pork carcasses were obtained on-line (prerigor) at a swine slaughter facility. Right sides were cut into wholesale parts and dissected into fat, lean, and bone to obtain total dissected carcass and primal cut lean. In this study, the input layer consisted of 81 nodes (80-point EM scan curve and warm carcass weight), one hidden layer of 42 nodes, and an output layer consisting of one node, which were run separately for outputs of ham, loin, or shoulder lean. The hidden layer connected to the output of total lean contained 50 nodes. Thirty-five scans were used for training of the network. The new network was then tested with 15 previously unseen input/output pairs. Separate neural networks were developed for the estimation of dissected total carcass, ham, loin, and shoulder lean. The NETS configuration improved on linear regression equations for estimation of total carcass lean by .31 kg, ham lean by .284 kg, and shoulder lean by .148 kg. Our results show that advanced computer logic systems have the capacity to improve upon traditional linear regression equations for prediction of pork carcass composition.

Animals↗

Evaluation of electronic technology to assess lamb carcass composition.

Accurate price signals are essential for producers of American lamb to ensure production of uniformly lean animals. Development of carcass merit-pricing systems will require the use of objective technology for assessing carcass composition or lean distribution. The objective of this study was to evaluate electronic technologies for accurate determination of lamb carcass composition. Lambs (n = 106) were selected as a representation of U.S. market lambs that transcended geographic location, sex, breed, carcass weight, yield grade, and production system. The independent variables used to predict lamb composition varied with the technology. The electronic technologies tested included realtime ultrasound, optical reflectance probe, bioelectrical impedance analysis, and electromagnetic scanning (TOBEC). All technologies, except realtime ultrasound, were tested on warm (prerigor) carcasses and repeated after a 24-h chill. Longitudinal ultrasonic scans of fat and muscle tissue depth and grading probe fat depths were marginal predictors of proportional carcass yield. The TOBEC measurements often accounted for more variability associated with kilograms of dissected lean and percentage of carcass lean than did carcass weight. Equations from TOBEC measurements were the most accurate predictors of weight and percentage of dissected and fat-free lean. Bioelectrical impedance measurements of resistance and reactance combined with carcass weight were also good predictors of carcass composition. Prediction of carcass lean distribution by measures of TOBEC were the most accurate for prediction of leg lean. The implications of usefulness of these technologies will depend on the commitment of the U. S. sheep industry in development of a lamb price discovery system based on carcass composition.

Animals↗