Search PubMed⌕ Search

Biomedical subjects

E Ohtsubo

Publications and source records attributed to E Ohtsubo.

At least 109 records · Page 6Linked to original sources
PubMed1987

Sequence analysis of the Brevibacterium lactofermentum trp operon.

Brevibacterium lactofermentum, a Gram-positive bacterium, is a commercially important amino acid producer. In this organism, the tryptophan biosynthetic enzymes are encoded within a 7725 bp HapII-BamHI fragment. Seven open reading frames were identified as trp genes by complementation tests with various B. lactofermentum and Escherichia coli tryptophan auxotrophs. Following the nomenclature established for E. coli and Serratia marcescens, the B. lactofermentum trp genes were designated trpL, trpE, trpG, trpD, trpC (including the trpF domain), trpB, and trpA. The organization of these genes is identical to that in S. marcescens. The nucleotide sequences of the putative ribosome-binding sites for the B. lactofermentum trp genes resemble those of E. coli and Bacillus subtilis. Computer analysis revealed that the trp enzymes of B. lactofermentum resemble the enzymes of the Gram-negative E. coli more closely than those of the Gram-positive B. subtilis.

Amino Acid Sequence↗
PubMed1987

Specific binding of transposase to terminal inverted repeats of transposable element Tn3.

Tn3 transposase, which is required for transposition of Tn3, has been purified by a low-ionic-strength-precipitation method. Using a nitrocellulose filter binding assay, we have shown that transposase binds to any restriction fragment. However, binding of the transposase to specific fragments containing the terminal inverted repeat sequences of Tn3 can be demonstrated by treatment of transposase-DNA complexes with heparin, which effectively removes the transposase bound to the other nonspecific fragments at pH 5-6. DNase I "footprinting" analysis showed that the transposase protects an inner 25-base-pair region of the 38-base-pair terminal inverted repeat sequence of Tn3. This protection is not dependent on pH. Interestingly, binding of the transposase to the inverted repeat sequences facilitates DNase I to nick at the end of the Tn3 sequence. It was also observed that the transposase protects the end regions of restriction fragments with a cohesive sequence at their 5' end or with a flush end from DNase I cleavage. The specific and nonspecific binding of transposase to DNA is ATP-independent.

Adenosine Triphosphate↗
PubMed1987

Repressor gene finO in plasmids R100 and F: constitutive transfer of plasmid F is caused by insertion of IS3 into F finO.

Fertility factor F confers bacterial conjugation, a process which involves at least 20 tra genes. Resistance plasmids such as R100, R6-5, and R1 have homology with F in the tra region. Conjugal transfer of these plasmids is, however, repressed, while transfer of F is constitutive. Repression of R transfer is due to the existence of the two genes, called finO and finP; constitutive transfer of F is believed to be due to a lack of finO in F. In this paper, we report the identification and DNA sequence of the finO gene of R100, encoding a protein of 21,265 daltons. We show that F does actually encode finO, but the gene has been inactivated by insertion of IS3. Lederberg and Tatum (Nature [London] 158:558, 1946), who discovered sexuality in bacteria, may have had an Escherichia coli K-12 strain harboring such an finO F factor, which facilitated the generation of recombinant progeny useful for genetic analysis of bacteria and established the foundation for molecular genetics.

Amino Acid Sequence↗
PubMed1986

Characterization of the gene products produced in minicells by pSM1, a derivative of R100.

At least ten polypeptides larger than 6 kilodaltons (K) are produced in minicells from the miniplasmid pSM1 in vivo. pSM1 (5804 bp) is a small derivative of the drug resistance plasmid R100 (ca. 90 kb) and carries the R100 essential replication region as well as some non-essential functions. Cloned restriction fragments of pSM1 and plasmids with deletions within pSM1 sequences were used to assign eight of the ten observed polypeptides to specific coding regions of pSM1. Two of these polypeptides were identified as RepA1 and RepA2, proteins encoded by the essential replication region of pSM1/R100. The nucleotide sequence consisting of 885 bp outside the essential replication region is presented here. This sequence contains an open reading frame, orf4, for a protein 22.9 K in size, and one of the pSM1-encoded polypeptides was identified as the orf4 gene product. Five additional polypeptides were shown to be the products of other open reading frames mapping outside the essential replication region. Specific functions have been assigned to four of these polypeptides and tentatively to the fifth.

Amino Acid Sequence↗
PubMed1986

Differential scanning calorimetric and theoretical studies of ColE1 DNA.

The differential scanning calorimetry (DSC) of plasmid ColE1 DNA was carried out. The DSC curve under the solvent condition of 1.0 X SSC buffer gave eleven clear peaks over the temperature range of 83 to 98 degrees C. The DSC curves obtained here were essentially in good agreement with the optical melting curves of ColE1 DNA reported previously. The theoretical melting profiles of ColE1 DNA calculated from its entire nucleotide sequence showed a good agreement with the DSC curves. The theoretical analysis made by constructing the thermal stability map showed that there was the positional correlation between the boundaries of the cooperatively melting regions and the ends of the protein coding regions of genes of ColE1. It was shown that the helix-coil transition of many of the small genes had a single cooperatively melting region. However, the large genes such as cea and mob3 had two or more cooperatively melting regions. It was suggested that this is closely related to the domain structures of the proteins encoded by such genes.

Calorimetry, Differential Scanning↗
PubMed1985

Cointegration and resolution mediated by IS101 present in plasmid pSC101.

A certain class of cointegrate plasmids was found to occur between a pSC101 derivative and a second plasmid pBV320 in E. coli F- cells. Cleavage analysis and DNA sequencing showed that the cointegrate plasmid contained direct repeats of an insertion sequence IS101 at the recombination junctions, indicating that formation of cointegrates was mediated by IS101, which is a natural constituent of pSC101. These cointegrates were formed only in cells which contained the transposon gamma-delta, suggesting that the gamma-delta sequence, which provides transposase, is responsible for cointegration. Whenever the cointegrate plasmids were present in cells containing gamma-delta or its related transposon Tn3, the cointegrates were dissolved to give pBV320::IS101 due to recombination at duplicated IS101 sequences in the cointegrates, suggesting that both gamma-delta and Tn3, which provide a resolvase, are responsible for the resolution of the cointegrates. Comparison between the nucleotide sequence of IS101 and those of gamma-delta and Tn3 shows a high degree of homology in the regions that have been shown to be the binding sites of resolvases, as well as in the terminal inverted repeats. However, there is no homology between IS101 and the other element, gamma-delta or Tn3, in the internal resolution site, at which the resolution event may occur.

Ampicillin↗
PubMed1985

Identification of a gene, tir of R100, functionally homologous to the F3 gene of F in the inhibition of RP4 transfer.

We detected a gene of R100 functionally homologous to the F3 gene of F in the inhibition of RP4 transfer. Using in vitro recombinant DNA techniques, we located the gene, designated tir, in a 0.9 kb region, 2,392-3,293 in the nucleotide sequence coordinate of R100. From the DNA sequence analysis of R100 (Ohtsubo unpublished results), a coding frame of polypeptides, whose molecular weight is estimated to be 24.1 kilodaltons (kd), was inferred to be the region tir. Furthermore, we showed that tir could not repress expression of the F3 gene.

Conjugation, Genetic↗
PubMed1985

Cointegrates carrying two copies of a Tn3 derivative in an inverted orientation.

We constructed a mutant of Tn3, Tn3 #2, that contains a 55-bp direct repeat of sequences near the amino-terminal coding region of the transposase, and an 8-bp EcoRI linker. This mutant transposase is functional. The plasmid carrying Tn3 #2, pMB8::Tn3 #2, recombines with the plasmid pHS1 at a frequency of 2.8 X 10(-7) recombinants per division cycle. This is similar to the recombination frequency of pHS1 and pMB8::Tn3+ (wild-type) which is 4.5 X 10(-6) recombinants per division cycle. One-third of the recombinants between pMB8::Tn3 #2 and pHS1 were approx. 22 kb in length. Restriction analysis and nucleotide sequencing showed that these large plasmids were Tn3 #2-mediated cointegrates formed by integration of pMB8::Tn3 #2 into pHS1. However, unlike Tn3 tnpR- -mediated cointegrates that contain direct repeats of the incoming element, Tn3 #2-mediated cointegrates carry two copies of Tn3 #2 in the form of inverted repeats. Like the tnpR- repeats, the Tn3 #2 repeats occur at both junctions between the parental plasmids, and are associated with a 5-bp direct duplication of the pHS1 target site. Furthermore, these recombinants contain a small deletion starting precisely at the end of Tn3 #2 and extending into pMB8 sequences. We propose a model for the generation of Tn3 #2-mediated cointegrates.

Base Sequence↗
PubMed1984

Insertion element IS1 encodes two structural genes required for its transposition.

The nucleotide sequence analysis of insertion element IS1 has shown that IS1 could have as many as six translational reading frames encoding possible proteins. In order to determine which reading frames are actual structural genes responsible for IS1-mediated recombination, we introduced base substitution mutations including nonsense mutations into all of the potential reading frames and examined the ability of these IS1 mutants to mediate cointegration between two plasmids. The results reveal that IS1 has two structural genes (termed insA and insB), which are required for plasmid cointegration mediated by IS1.

Base Sequence↗
PubMed1984

Both inverted repeat sequences located at the ends of IS1 provide promoter functions.

Escherichia coli RNA polymerase was found to bind specifically to restriction fragments containing either end of IS1. DNase I footprint analyses indicate that RNA polymerase protects approximately 70 base-pairs at each end of IS1, including the left or right terminal inverted repeat sequences in IS1 (termed insL or insR, respectively) as well as some non-IS1 sequence directly adjacent to each end of IS1. Analysis of transcripts from the left terminal region of IS1 shows that the insL sequence contains a promoter (named insPL), and that RNA synthesis initiates apparently at one in a stretch of five adenylate residues within insL and continues toward the interior region of IS1. Interestingly, most of the resulting transcripts contain polyuridylate residues (more than 5 U residues) at their 5'-ends. Analysis of transcripts from the right terminal region of IS1 indicates that the insR sequence also contains a promoter (named insPR). RNA synthesis initiates specifically at an adenylate residue within insR and continues toward the interior region of IS1, i.e. in the opposite direction to RNA synthesis initiating at insPL, which is present at the other end of IS1. We propose that insPL is used to make the messenger RNA for the IS1-encoded genes insA and insB, while insPR might be used to synthesize an anti-mRNA and thereby negatively regulate insPL.

Base Sequence↗
PubMed1984

A 37 X 10(3) molecular weight plasmid-encoded protein is required for replication and copy number control in the plasmid pSC101 and its temperature-sensitive derivative pHS1.

Nucleotide sequences were determined for a region essential for autonomous replication and partitioning of pSC101, a plasmid whose replication is dependent on the Escherichia coli dnaA gene product. The essential replication region contains one long coding sequence, rep101 , for a protein composed of 316 amino acids, and a polypeptide approximately 37 X 10(3) Mr in size was identified as the rep101 gene product. rep101 is preceded by two inverted repeat sequences, three directly repeated sequences and a region of high A + T content containing a sequence similar to the E. coli oriC consensus sequence. Because the lesions in seven replication-deficient insertion mutants, four mutants with increased copy number and one temperature-sensitive replication mutant occur within rep101 , the rep101 gene product must control pSC101 replication and copy number. par, a region adjacent to the replication region, which functions in stable plasmid inheritance, contains several inverted repeat sequences.

Autoradiography↗
PubMed1983

Distribution of insertion element IS1 in natural isolates of Escherichia coli.

Total DNAs from twelve natural isolates of Escherichia coli from animals and humans were examined by hybridization with a probe for IS1. Considerable variation in copy number was found. In the case of two strains isolated from the same individual, one strain contained no copies of IS1 and the other, much greater than 30. Evidence was also obtained for the existence of IS1-like elements (iso-IS1s) of greater than 15% sequence divergence relative to the IS1 from antibiotic resistance plasmid R100.

Animals↗
PubMed1983

Repression of cointegration ability of insertion element IS1 by transcriptional readthrough from flanking regions.

We describe a repression mechanism in which read-through messages transcribed from a gene into an IS1 sequence inhibit its ability to mediate plasmid cointegration. This mechanism was derived from the demonstration that removal of the promoter region of the chloramphenicol resistance gene in transposon Tn9, or introduction of a strong transcription terminator of phage T7 downstream of the chloramphenicol resistance gene, increases the cointegration ability of the downstream IS1 sequence when in a particular orientation. The cointegration ability of an IS1 sequence downstream of the chloramphenicol resistance gene but in an orientation opposite that of the above-mentioned IS1 sequence also can be repressed. Analysis of transcripts synthesized in vitro showed that the transcripts of the chloramphenicol resistance gene were read through into the IS1 sequence located downstream of the gene in either orientation. Repression of this type may be one mechanism that controls the rate of transposition of the IS1 element, which apparently does not encode a structural gene for repressor.

Chloramphenicol↗
PubMed1983

Escherichia coli RNA polymerase binding sites and transcription initiation sites in the transposon Tn3.

We have identified the Escherichia coli RNA polymerase-binding sites and the transcription initiation sites in the transposon Tn3. Results from nitrocellulose filter-binding assays indicate that there are two regions within Tn3 capable of forming stable binary complexes with RNA polymerase. The two regions are a 208-bp region containing the N-terminal coding sequence of the transposase (tnpA) and repressor (tnpR) genes, and a 332-bp region containing the N-terminal coding sequence for the beta-lactamase (bla) gene. DNase I footprint analysis of the 208-bp and 332-bp fragments further defined an extended region of protection, approx. 110 bp long, located between the transposase and repressor coding regions, and an 80-bp region of protection near the N-terminal coding sequence of the beta-lactamase gene. In vitro transcription studies with fragments containing these protected regions allowed us to determine the precise transcription initiation sites for the transposase, repressor, and beta-lactamase mRNAs. The transposase and repressor mRNAs are transcribed divergently and their transcription initiation sites are separated by 80 bp. The -35 homology regions for the transposase and repressor promoters are separated by 10 bp and the -10 homology region of the transposase promoter is coincident with the recombination site (res) for the site-specific recombinase activity (resolvase) of the repressor protein, which is required for resolution of Tn3 cointegrates. We discuss the significance of this complex divergently transcribed promoter region with respect to regulation of Tn3 transposition and we propose a model for coordinated regulation of the tnpA and tnpR genes. We also compare the Tn3 tnpA-tnpR intercistronic region with that of the closely related transposon gamma delta.

Binding Sites↗