Search PubMed⌕ Search

Biomedical subjects

E J Dodson

Publications and source records attributed to E J Dodson.

At least 19 recordsLinked to original sources
PubMed1999

Efficient anisotropic refinement of macromolecular structures using FFT.

This paper gives the equations for the use of fast Fourier transformations in individual atomic anisotropic refinement. Restraints on bonded atoms, on the sphericity of each atom and between non-crystallographic symmetry related atoms are described. These have been implemented in the program REFMAC and its performance with several examples is analysed. All the tests show that anisotropic refinement not only reduces the R value and Rfree but also improves the fit to geometric targets, indicating that this parameterization is valuable for improving models derived from experimental data. The computer time taken is comparable to that for isotropic refinements.

Catalase↗
PubMed1999

Solution of the structure of the cofactor-binding fragment of CysB: a struggle against non-isomorphism.

The elucidation of the structure of CysB(88-324) by multiple isomorphous replacement (MIR) techniques was seriously delayed by problems encountered at every stage of the analysis. There was extensive non-isomorphism both between different native crystals and between native and heavy-atom-soaked crystals. The heavy-atom substitution was invariably weak and different soaking experiments frequently led to substitution at common sites. These correlated heavy-atom binding sites resulted in an overestimation of the phase information. Missing low-resolution reflections in the native data set, constituting only 2% of the total observations, reduced the power of density modification and phase refinement. Finally, the extensive dimer interface made it difficult to isolate a single molecule in the course of model building into the MIR maps. The power of maximum likelihood refinement (REFMAC) was exploited in solving the structure by means of iterative cycles of refinement of a partial model, initially comprising only 30% of the protein atoms in the final coordinate set. This technique, which uses experimental phases, can automatically discriminate the correct and incorrect parts of electron-density maps and give properly weighted combined phases which are better than the experimental or calculated ones. This allowed the model to be gradually extended by manual building into improved electron-density maps. A model generated in this way, containing just 50% of the protein atoms, proved good enough to find the transformations needed for multi-crystal averaging between different crystal forms. The averaging regime im-proved the phasing dramatically such that the complete model could be built. The problems, final solutions and some possible causes for the observed lack of isomorphism are discussed.

Bacterial Proteins↗
PubMed1998

Incorporation of prior phase information strengthens maximum-likelihood structure refinement.

The application of a maximum-likelihood analysis to the problem of structure refinement has led to striking improvements over the traditional least-squares methods. Since the method of maximum likelihood allows for a rational incorporation of other sources of information, we have derived a likelihood function that incorporates experimentally determined phase information. In a number of different test cases, this target function performs better than either a least-squares target or a maximum-likelihood function lacking prior phases. Furthermore, this target gives significantly better results compared with other functions incorporating phase information. When combined with a procedure to mask 'unexplained' density, the phased likelihood target also makes it possible to refine very incomplete models.

Animals↗
PubMed1998

Validation tools: can they indicate the information content of macromolecular crystal structures?

The explosive increase in the number of published three-dimensionsal structures of macromolecules determined by X-ray analysis places a responsibility on experimentalists, referees and curators of databases to ensure correspondence between the structure parameters and data. Validation tools will evolve as more appropriate statistical techniques and new information, such as that from proteins analysed at atomic resolution, becomes available.

Crystallography↗
PubMed1998

Crystal structure of tryptophanase.

The X-ray structure of tryptophanase (Tnase) reveals the interactions responsible for binding of the pyridoxal 5'-phosphate (PLP) and atomic details of the K+ binding site essential for catalysis. The structure of holo Tnase from Proteus vulgaris (space group P2(1)2(1)2(1) with a = 115.0 A, b = 118.2 A, c = 153.7 A) has been determined at 2.1 A resolution by molecular replacement using tyrosine phenol-lyase (TPL) coordinates. The final model of Tnase, refined to an R-factor of 18.7%, (Rfree = 22.8%) suggests that the PLP-enzyme from observed in the structure is a ketoenamine. PLP is bound in a cleft formed by both the small and large domains of one subunit and the large domain of the adjacent subunit in the so-called "catalytic" dimer. The K+ cations are located on the interface of the subunits in the dimer. The structure of the catalytic dimer and mode of PLP binding in Tnase resemble those found in aspartate amino-transferase, TPL, omega-amino acid pyruvate aminotransferase, dialkylglycine decarboxylase (DGD), cystathionine beta-lyase and ornithine decarboxylase. No structural similarity has been detected between Tnase and the beta 2 dimer of tryptophan synthase which catalyses the same beta-replacement reaction. The single monovalent cation binding site of Tnase is similar to that of TPL, but differs from either of those in DGD.

Amino Acid Sequence↗
PubMed1997

The structure of the cofactor-binding fragment of the LysR family member, CysB: a familiar fold with a surprising subunit arrangement.

BACKGROUND: CysB is a tetrameric protein of identical subunits (M(r) = 36,000) which controls the expression of genes associated with the biosynthesis of cysteine in bacteria. CysB is both an activator and a repressor of transcription whose activity is responsive to the inducer N-acetylserine; thiosulphate and sulphide act as anti-inducers. CysB is a member of the LysR family of prokaryotic transcriptional regulatory proteins which share sequence similarities over approximately 280 residues including a putative helix-turn-helix DNA-binding motif at their N terminus. The aims of the present study were to explore further the complex molecular biology and curious ligand binding properties of CysB and to provide structural insights into the LysR family of proteins. RESULTS: The crystal structure of a dimeric chymotryptic fragment of Klebsiella aerogenes CysB comprising residues 88-324, has been solved by multiple isomorphous replacement and multi-crystal averaging and refined against data extending to 1.8 A resolution. The protein comprises two alpha/beta domains (I and II) connected by two short segments of polypeptide. The two domains enclose a cavity lined by polar sidechains, including those of two residues whose mutation is associated with constitutive expression of the cysteine regulon. A sulphate anion and a number of well ordered water molecules have been modelled into discrete electron-density peaks within this cavity. In the dimer, strands beta B from domain I and strands beta G from domain II come together so that a pair of antiparallel symmetry-related 11-stranded twisted beta-pleated sheets is formed. CONCLUSIONS: The overall structure of CysB(88-324) is strikingly similar to those of the periplasmic substrate-binding proteins. A similar fold has also been observed in the cofactor-binding domain of Lac repressor, implying a structural relationship between the Lac repressor and LysR families of proteins. In contrast to Lac repressor, in CysB the twofold axis of symmetry that relates the monomers in the dimer is perpendicular rather than parallel to the long axis of the cofactor-binding domain. This seems likely to place the DNA-binding domains at opposite extremes of the molecule possibly accounting for CysB's extended DNA footprints.

Amino Acid Sequence↗
PubMed1997

Peptide binding in OppA, the crystal structures of the periplasmic oligopeptide binding protein in the unliganded form and in complex with lysyllysine.

The periplasmic oligopeptide binding protein, OppA, acts as the initial receptor for the uptake of peptides by the oligopeptide permease (Opp) in Gram-negative bacteria. Opp will handle peptides between two and five amino acid residues regardless of their sequence. The crystal structures of a series of OppA-peptide complexes have revealed an enclosed but versatile peptide binding pocket and have illustrated how tri- and tetrapeptide ligands are accommodated. Here, the crystal structures of (i) OppA complexed with a dipeptide (lysyllysine) and (ii) unliganded OppA have been solved using X-ray data extending to 1.8 and 2.4 A spacing, respectively. In the dipeptide complex, the alpha-amino group of the ligand is anchored through an ion pair interaction with Asp419, as observed in complexes with longer peptides. However, its alpha-carboxylate group forms water-mediated interactions with the guanidinium groups of Arg404 and Arg413 rather than the direct salt bridges to Arg413 and His371 observed in the tripeptide and tetrapeptide complexes, respectively. Isothermal titration calorimetric measurements of the binding of lysine-containing peptides of different lengths to OppA show that the dipeptide, KK, is bound with approximately 60-fold lower affinity than related tri- and tetrapeptides (KKK and KKKA, respectively). These data are discussed with reference to the calculated enthalpic and entropic contributions to ligand binding and the structures of the OppA peptide complexes. In the unliganded molecule, domain III has rotated as a rigid body through 26 degrees away from domains I and II, exposing the ligand binding site. The water structure in the binding cleft shows similarities to that in the various OppA-peptide complexes.

Bacterial Proteins↗
PubMed1997

The structure of the GTPase-activating domain from p50rhoGAP.

Members of the Rho family of small G proteins transduce signals from plasma-membrane receptors and control cell adhesion, motility and shape by actin cytoskeleton formation. They also activate other kinase cascades. Like all other GTPases, Rho proteins act as molecular switches, with an active GTP-bound form and an inactive GDP-bound form. The active conformation is promoted by guanine-nucleotide exchange factors, and the inactive state by GTPase-activating proteins (GAPs) which stimulate the intrinsic GTPase activity of small G proteins. Rho-specific GAP domains are found in a wide variety of large, multi-functional proteins. Here we report the crystal structure of an active 242-residue C-terminal fragment of human p50rhoGAP. The structure is an unusual arrangement of nine alpha-helices, the core of which includes a four-helix bundle. Residues conserved across the rhoGAP family are largely confined to one face of this bundle, which may be an interaction site for target G proteins. In particular, we propose that Arg 85 and Asn 194 are involved in binding G proteins and enhancing GTPase activity.

Amino Acid Sequence↗
PubMed1996

Enzymatic ketonization of 2-hydroxymuconate: specificity and mechanism investigated by the crystal structures of two isomerases.

5-Carboxymethyl-2-hydroxymuconate isomerase (CHMI) and 4-oxalocrotonate tautomerase (4-OT) are enzymes that catalyze the isomerization of unsaturated ketones. They share a common enzyme mechanism, although they show a preference for different substrates. There is no apparent sequence homology between the enzymes. To investigate the molecular mechanism and the basis for their substrate specificity, we have determined the crystal structures of the two enzymes at high resolution. 4-OT is hexameric, with the subunits arranged with 32 symmetry. CHMI is trimeric and has extensive contacts between subunits, which include secondary structural elements. The central core of the CHMI monomer has a fold similar to a 4-OT dimer, but the secondary structural elements that form the subunit contacts around the 3-fold axis are different in the two enzymes. The region of greatest similarity between the two enzymes is a large pocket that is proposed to be the active site. The enzymes appear to operate via a "one-base" mechanism, and the possible role of residues in this pocket is discussed in view of this idea. Finally, the molecular basis for substrate specificity in the two enzymes is discussed.

Binding Sites↗
PubMed1996

Modern developments in molecular replacement.

Molecular replacement is a possible route to obtaining initial phasing for an unknown structure from a known, structurally related molecule. Recent years have seen an explosive growth in the number of protein structures solved using this technique. Automated packages can make the application quite straightforward. Progress has been made in the placing of fragments of complexes, and in the use of imprecise models from NMR or homology modelling. Such models have necessitated the development of new approaches to rebuilding and refinement.

Animals↗
PubMed1996

Circular assemblies.

During 1994 and 1995, the structures of the serum amyloid P component, the bacterial chaperonin GroEL, the 20S proteasome, the bacterial light-harvesting complexes and the tryptophan operon RNA-binding attenuation protein have been determined. These structures all form circular assemblies in which the individual subunits are related by rotational symmetry. In most cases the circular organization generates a new biophysical property and a specific biological function which have presumably been selected by evolution.

Bacterial Proteins↗
PubMed1995

The crystal structures of the oligopeptide-binding protein OppA complexed with tripeptide and tetrapeptide ligands.

BACKGROUND: The periplasmic oligopeptide-binding protein OppA has a remarkably broad substrate specificity, binding peptides of two or five amino-acid residues with high affinity, but little regard to sequence. It is therefore an ideal system for studying how different chemical groups can be accommodated in a protein interior. The ability of the protein to bind peptides of different lengths has been studied by co-crystallising it with different ligands. RESULTS: Crystals of OppA from Salmonella typhimurium complexed with the peptides Lys-Lys-Lys (KKK) and Lys-Lys-Lys-Ala (KKKA) have been grown in the presence of uranyl ions which form important crystal contacts. These structures have been refined to 1.4 A and 2.1 A, respectively. The ligands are completely enclosed, their side chains pointing into large hydrated cavities and making few strong interactions with the protein. CONCLUSIONS: Tight peptide binding by OppA arises from strong hydrogen bonding and electrostatic interactions between the protein and the main chain of the ligand. Different basic side chains on the protein form salt bridges with the C terminus of peptide ligands of different lengths.

Amino Acid Sequence↗
PubMed1995

X-ray crystallographic studies on hexameric insulins in the presence of helix-stabilizing agents, thiocyanate, methylparaben, and phenol.

Three X-ray crystallographic studies have been carried out on pig insulin in the presence of three ligands, thiocyanate, methylparaben (methyl p-hydroxybenzoate), and phenol. In each case, rhombohedral crystals were obtained, which diffracted to 1.8, 1.9, and 2.3 A, respectively. Each crystal structure was very similar to that of 4-zinc pig insulin, which was used as a starting model for PROLSQ refinement (Collaborative Computational Project, Number 4, 1994). The R factors for the refined structures of thiocyanate insulin, methylparaben insulin, and phenol insulin were 19.6, 18.4, and 19.1, respectively. Each crystal structure consists of T3R3f insulin hexamers with two zinc ions per hexamer. In the R3f trimer of the thiocyanate insulin hexamer, one thiocyanate ion is coordinated to the zinc on the hexamer 3-fold axis, but there is no evidence of zinc ion binding in the off-axis zinc ion sites seen in the 4-zinc pig insulin structure. In the methylparaben insulin and phenol insulin hexamers, the phenolic ligands are bound at the dimer-dimer interfaces in the R3f trimers in a manner similar to that of phenol in R6 phenol insulin. The binding of methylparaben appears to make the hexamer more compact by drawing the A and the B chains closer together in the binding site. In all three structures presented herein, the conformations of the first three residues of the B chain in the R3f trimer are extended rather than alpha-helical, as is seen in R6 phenol insulin. The energetics of ligand binding in the insulin hexamer are discussed.

Animals↗
PubMed1995

The crystal structure of a major secreted aspartic proteinase from Candida albicans in complexes with two inhibitors.

BACKGROUND: Infections caused by Candida albicans, a common fungal pathogen of humans, are increasing in incidence, necessitating development of new therapeutic drugs. Secreted aspartic proteinase (SAP) activity is considered an important virulence factor in these infections and might offer a suitable target for drug design. Amongst the various SAP isozymes, the SAP2 gene product is the major form expressed in a number of C. albicans strains. RESULTS: The three-dimensional structures of SAP2 complexed with the tight-binding inhibitor A70450 (a synthetic hexapeptide analogue) and with the general aspartic proteinase inhibitor pepstatin A (a microbial natural product) have been determined to 2.1 A and 3.0 A resolution, respectively. Although the protein structure retains the main features of a typical aspartic proteinase, it also shows some significant differences, due mainly to several sequence insertions and deletions (as revealed by homology modelling), that alter the shape of the binding cleft. There is also considerable variation in the C-terminal structural domain. CONCLUSIONS: The differences in side chains, and in the conformations adopted by the two inhibitors, particularly at their P4, P3 and P'2 positions (using standard notation for protease-inhibitor residues), allows the A70450 structure to complement, more accurately, that of the substrate-binding site of SAP2. Some differences in the binding clefts of other SAP isoenzymes may be deduced from the SAP2 structure.

Amino Acid Sequence↗
PubMed1995

The crystal structure of a cyanogenic beta-glucosidase from white clover, a family 1 glycosyl hydrolase.

BACKGROUND: beta-glucosidases occur in a variety of organisms and catalyze the hydrolysis of aryl and alkyl-beta-D-glucosides as well as glucosides with only a carbohydrate moiety (such as cellobiose). The cyanogenic beta-glucosidase from white clover (subsequently referred to as CBG) is responsible for the cleavage of cyanoglucosides. Both CBG and the cyanoglucosides occur within the plant cell wall where they are found in separate compartments and only come into contact when the leaf tissue experiences mechanical damage. This results in the eventual production of hydrogen cyanide which acts as a deterrent to grazing animals. beta-glucosidases have been assigned to particular glycosyl hydrolase families on the basis of sequence similarity; this classification has placed CBG in family 1 (there are a total of over 40 families) for which a three-dimensional structure has so far not been determined. This is the first report of the three-dimensional structure of a glycosyl hydrolase from family 1. RESULTS: The crystal structure of CBG has been determined using multiple isomorphous replacement. The final model has been refined at 2.15 A resolution to an R factor of 18.9%. The overall fold of the molecule is a (beta/alpha)8 [or (alpha/beta)8] barrel (in common with a number of glycosyl hydrolases) with all residues located in a single domain. CONCLUSIONS: Sequence comparisons between beta-glucosidases of the same family show that residues Glu183 and Glu397 are highly conserved. Both residues are positioned at the end of a pocket located at the C terminus of the barrel and have been assigned the respective roles of proton donor and nucleophile on the basis of inhibitor-binding and mutagenesis experiments. These roles are consistent with the environments of the two residues. The pocket itself is typical of a sugar-binding site as it contains a number of charged, aromatic and polar groups. In support of this role, we present crystallographic data on a possible product complex between CBG and glucose, resulting from co-crystallization of the native enzyme with its natural substrate, linamarin.

Binding Sites↗