Biomedical subjects

E Ansoborlo

Publications and source records attributed to E Ansoborlo.

At least 19 recordsLinked to original sources

PubMed2006

Comparison of Prussian blue and apple-pectin efficacy on 137Cs decorporation in rats.

Cesium-137 (137Cs) is one of the most important nuclear fission elements that contaminated the environment after the explosion of the Chernobyl nuclear power plant in Ukraine (1986). The aim of the study was to compare the efficacy of two chelating agent, Prussian blue and apple-pectin on 137cesium decorporation in rats. Rats were intravenously injected with a solution of 137cesium (5 kBq per rat). Chelating agents, Prussian blue or apple-pectin were given immediately after Cs contamination and during 11 days by addition of each chelating agent in drinking water at a concentration corresponding to 400 mg kg(-1) day(-1). Efficiency was evaluated 11 days after contamination (at the end of treatment) through their ability to promote Cs excretion and to reduce the radionuclide accumulation in some retention compartments (blood, liver, kidneys, spleen, skeleton and in the remaining carcass). In these conditions after treatment with Prussian blue a fivefold increase in fecal excretion of Cs was observed and was associated with a reduction in the radionuclide retention in the main organs measured. In contrast, no significant differences were observed between untreated rats and rats treated with apple-pectin. These observations were discussed in terms of ability of pectins to bind Cs and compared to recently published results obtained after treatment of Cs-contaminated children with this chelate.

Animals↗

PubMed2006

An interdisciplinary approach to investigate the impact of cobalt in a human keratinocyte cell line.

Since in nuclear power plants, risks of skin contact contamination by radiocobalt are significant, we focused on the impact of cobalt on a human cutaneous cell line, i.e. HaCaT keratinocytes. The present paper reports an interdisciplinary approach aimed at clarifying the biochemical mechanisms of metabolism and toxicity of cobalt in HaCaT cells. Firstly, a brief overview of the used instrumental techniques is reported. The following parts present description and discussion of results concerning: (i) toxicological studies concerning cobalt impact towards HaCaT cells (ii) structural and speciation fundamental studies of cobalt-bioligand systems, through X-ray absorption spectroscopy (XAS), ab initio and thermodynamic modelling (iii) preliminary results regarding intracellular cobalt speciation in HaCaT cells using size exclusion chromatography/inductively coupled plasma-atomic emission spectroscopy (SEC/ICP-AES) and direct in situ analysis by ion beam micropobe analytical techniques.

Cell Line↗

PubMed2006

Metal(loid)s and radionuclides cytotoxicity in Saccharomyces cerevisiae. Role of YCF1, glutathione and effect of buthionine sulfoximine.

The presence of heavy metal(loid)s in soils and waters is an important issue with regards to human health. Taking into account speciation problems, in the first part of this report, we investigated under identical growth conditions, yeast tolerance to a set of 15 cytotoxic metal(loid)s and radionuclides. The yeast cadmium factor 1 (YCF1) is an ATP-Binding Cassette transporter mediating the glutathione detoxification of heavy metals. In the second part, metal(loid)s that could be handled by YCF1 and a possible re-localisation of the transporter after heavy metal exposure were evaluated. YCF1 and a C-terminal GFP fusion, YCF1-GFP, were overexpressed in wild-type and Deltaycf1 strains. Both forms were functional, conferring a tolerance to Cd, Sb, As, Pb, Hg but not to Ni, Zn, Cu, Ag, Se, Te, Cr, Sr, Tc, U. Confocal experiments demonstrated that during exposure to cytotoxic metals, the localisation of YCF1-GFP was restricted to the yeast vacuolar membrane. In the last part, the role of glutathione in this resistance mechanism to metal(loid)s was studied. In the presence of heavy metals, application of buthionine sulfoximine (BSO), a well-known inhibitor of gamma-glutamylcysteine synthetase, led to a decrease in the cytosolic pool of GSH and to a limitation of yeast growth. Surprisingly, BSO was able to phenocopy the deletion of gamma-glutamylcysteine synthetase after exposure to Cd but not to Sb or As. In the genetic context of gsh1 and gsh2 yeast mutants, the critical role of GSH for Cd, As, Sb and Hg tolerance was compared to that of wild-type and Deltaycf1.

ATP-Binding Cassette Transporters↗

PubMed2004

Influence of uranium speciation on normal rat kidney (NRK-52E) proximal cell cytotoxicity.

Uranium is a naturally occurring heavy metal. Its extensive use in the nuclear cycle and for military applications has focused attention on its potential health effects. Acute exposures to uranium are toxic to the kidneys where they mainly cause damage to proximal tubular epithelium. The purpose of this study was to investigate the biological consequences of acute in vitro uranyl exposure and the influence of uranyl speciation on its cytotoxicity. NRK-52E cells, representative of rat kidney proximal epithelium, were exposed to uranyl-carbonate and -citrate complexes, which are the major complexes transiting through renal tubules after acute in vivo contamination. Before NRK-52E cell exposure, these complexes were diluted in classical or modified cell culture media, which can possibly modify uranyl speciation. In these conditions, uranium cytotoxicity appears after 16 h of exposure. The CI50 cytotoxicity index, the uranium concentration leading to 50% dead cells after 24 h of exposure, is 500 microM (+/-100 microM) and strongly depends on uranyl counterion and cell culture medium composition. Computer modeling of uranyl speciation is reported, enabling one to draw a parallel between uranyl speciation and its cytotoxicity.

Animals↗

PubMed2004

Comparative absorption parameters of Pu and Am from PuO2 and mixed oxide aerosols measured after in vitro dissolution test and inhalation in rats.

PURPOSE: To compare specific absorption parameter values obtained from in vitro dissolution studies (this paper) and in vivo experiments (data published by Ramounet et al, 2000) and to determine their influence on Dose Per Unit Intake (DPUI) calculations. MATERIALS AND METHODS: Experiments were performed on plutonium oxide (PuO2) and two Mixed Oxide (MOx) preparations containing 5% Pu (w/w) made according to the industrial process in vitro using a static test and in vivo after rat inhalation. RESULTS: Behaviour of Pu and Am shows, in vitro, at shorter times, a greater rapid dissolution fraction f(r) for Pu (factor 10) and Am (factor 2) with MOx powders compared with PuO2, whereas in vivo results show a greater fraction f(r) for Pu (factor 5) and Am (factor 15) with PuO2 compared with MOx powders. This phenomenon has not been observed for slow dissolution absorption parameter s(s). The in vivo parameters for Pu and Am in these materials were very close to the default values recommended by International Commission for Radiological Protection for default Type S. CONCLUSIONS: Results obtained have shown that solubility of Pu from the mixed oxide was higher than that of Pu from PuO2. Nevertheless, no significant difference was observed between the three compounds in the corresponding dose coefficients in vivo or in vitro. Therefore, for these particular compounds, variation in the chemical composition of the aerosols had no significant influence on DPUI. Consequently, in vitro, the dissolution test can provide a good estimate of the in vivo behaviour. Studies of variation of % Pu (w/w) from MOx are in progress in our laboratory to confirm these conclusions.

Absorption↗

PubMed2004

Radionuclide biokinetics database (RBDATA-EULEP): an update.

The main activity of the RBDATA-EULEP project is the development of an electronic database of information on the biokinetics of radionuclides after intake by inhalation, ingestion or injection. It consists of linked tables of publications and experiments, with details and comments on the materials, procedures and results. By March 2004 it contained information on more than 1600 experiments from 600 publications. It will be extended and Internet access will also be provided.

Body Burden↗

PubMed2003

Optimising monitoring regimens for inhaled uranium oxides.

This paper provides guidance on the most appropriate monitoring procedures and intervals, the likely uncertainties in the assessment of intake and recommendations on appropriate investigation levels for repeated exposures to uranium trioxide, octoxide and dioxide of natural composition.

Absorption↗

PubMed2003

Biokinetics and assessment of intake of thorium dioxide.

The aim of this work was to investigate the biokinetics of thorium dioxide in animals for the purpose of assessing intakes of the compound by workers and the resulting doses. The results imply that measurements of the decay products in the chest or extrapolations from urine analysis data are unlikely to be of value for doses below 20 mSv. Even higher doses should be interpreted with caution as a consequence of uncertainties in particle size distribution and variations in dietary excretion.

Absorption↗

PubMed2003

In vivo measurement of Pu dissolution parameters of MOX aerosols and related uncertainties in the values of the dose per unit intake.

The aim of this study was to compare dissolution parameter values for Pu from industrial MOX with different Pu contents. For this purpose, preliminary results obtained after inhalation exposure of rats to MOX containing 2.5% Pu are reported and compared to those obtained previously with MOX containing 5% Pu. Dissolution parameter values appear to increase when the amount of Pu decreases. Rapid fractions, f(r), of 4 x 10(-3) (s.d. = 2 x 10(-3)) and 1 x 10(-3) (s.d. = 6 x 10(-4)) and slow dissolution rates, s(s) of 2 x 10(-4) d(-1) (standard deviation, sigma = 5 x 10(-5)) and 5 x 10(-5) d(-1) (sigma = 1 x 10(-5)) were derived for MOX containing 2.5 and 5% of Pu, respectively. Simulations were performed to assess uncertainties on dose due to experimental errors. The relative standard deviations of the dose per unit intake (DPUI) due to f(r) (4-8%), are far less than those due to s(s) (about 20%), which is the main parameter altering the dose. Although quite different dissolution parameter values were derived, similar DPUIs were obtained for MOX aerosols containing 2.5 and 5% Pu which appear close to that for default Type S values.

Absorption↗

PubMed2003

Anomalies between radiological and chemical limits for uranium after inhalation by workers and the public.

Exposure limits for workers and the public are based on both chemical toxicity and radiation dose. As a consequence of the different procedures used in their calculation they are incompatible, and adherence to one limit may result in a serious breach of the other. This paper explores the background to these limits, the problems posed by their application and proposes how best to achieve compliance with both limits.

Air Pollutants, Radioactive↗

PubMed2003

Study of uranium transfer across the blood-brain barrier.

Uranium is a heavy metal which, following accidental exposure, may potentially be deposited in human tissues and target organs, the kidneys and bones. A few published studies have described the distribution of this element after chronic exposure and one of them has demonstrated an accumulation in the brain. In the present study, using inductively coupled plasma mass spectrometry (ICP-MS) for the quantification of uranium, uranium transfer across the blood-brain barrier (BBB) has been assessed using the in situ brain perfusion technique in the rat. For this purpose, a physiological buffered bicarbonate saline at pH 7.4 containing natural uranium at a given concentration was perfused. After checking the integrity of the BBB during the perfusion, the background measurement of uranium in control rats without uranium in the perfusate was determined. The quantity of uranium in the exposed rat hemisphere, which appeared to be significantly higher than that in the control rats, was measured. Finally, the possible transfer of the perfused uranium not only in the vascular space but also in the brain parenchyma is discussed.

Animals↗

PubMed2003

Review of methods and computer codes for interpretation of bioassay data.

Internal dose determination is an essential component of individual monitoring programmes for workers or members of the public exposed to radionuclides, and methods and computer programs are required for dose assessment. A recent international European Radiation Dosimetry Group (EURADOS) intercomparison has shown unacceptably large ranges in the results assessment. An ICRP working party has been initiated to consider what guidance ICRP can give on the use of models and interpret bioassay data in terms of intake/dose. In this field, six codes for bioassay data interpretation, which implement the current ICRP publication 78 biokinetic models, have been reviewed against several criteria with different levels of importance: minor criteria such as the practical use of the code and the graphical capabilities, and major criteria such as the choice of available parameters, peculiarities of data fitting and interpretation, the choice of biokinetic models and the use of uncertainties. All these criteria were assessed using one artificial set of data and two examples extracted from the previous international EURADOS intercomparison.

Administration, Oral↗

PubMed2003

RBDATA-EULEP: providing information to improve internal dosimetry.

The overall aim of the concerted action RBDATA-EULEP is to provide information to improve the assessments of intakes of radionuclides and of the resulting doses. This involves a review of the behaviour of radionuclides following intake, and the transfer of expertise on methodology by organising small training workshops. The main activity is the development of an electronic database, effectively an annotated bibliography, but the electronic format used facilitates extension, updating and information retrieval. It consists of linked tables of references and experiments, with details and comments on the materials, procedures and results. By June 2002 it contained information on 524 inhalation, 282 ingestion and 164 injection experiments from 391 references. It will be extended, and Internet access provided. Prospective users include groups developing standards for internal dosimetry, scientists conducting research on radionuclide biokinetics and health physicists assessing the consequences of accidental intakes.

Body Burden↗

PubMed2003

Practical application of the ICRP Human Respiratory Tract Model.

The ICRP Publication 66 Human Respiratory Tract Model (HRTM) has been applied to calculate dose coefficients and bioassay functions using default values of parameters relating to the material and the subjects. The ICRP Task Group on Internal Dosimetry (INDOS) has developed a guidance document on application of the HRTM in situations where using specific information can improve dose assessments. INDOS is now revising the worker exposure documents (ICRP Publications 68 and 78). Application of the HRTM requires a review of the lung-to-blood absorption characteristics of inhaled radionuclides. Where appropriate, compound-specific absorption parameter values will be derived, and other compounds will be assigned to default Types using current information. Although no major changes to the HRTM are envisaged, this revision provides an opportunity for some refining and updating in the light of experience and new information.

Aerosols↗

PubMed2002

Determination of the physical and chemical properties, biokinetics, and dose coefficients of uranium compounds handled during nuclear fuel fabrication in France.

The introduction of new ICRP recommendations, especially the new Human Respiratory Tract Model (HRTM) in ICRP Publication 66 led us to focus on some specific parameters related to industrial uranium aerosols collected between 1990 and 1999 at French nuclear fuel fabrication facilities operated by COGEMA, FBFC, and the CEA. Among these parameters, the activity median aerodynamic diameter (AMAD), specific surface area (SSA), and parameters describing absorption to blood f(r), s(r) and s(s) defined in ICRP Publication 66 were identified as the most relevant influencing dose assessment. This study reviewed the data for 25 pure and impure uranium compounds. The average value of AMAD obtained was 5.7 microm (range 1.1-8.5 microm), which strongly supports the choice of 5 microm as the default value of AMAD for occupational exposures. The SSA varied between 0.4 and 18.3 m2 g(-1). For most materials, values of the absorption parameters f(r), s(r), and s(s) derived from the in vitro experiments were generally consistent with those derived from the in vivo experiments. Using average values for each pure compound allowed us to classify UO2 and U3O8 as Type S, mixed oxides, UF4, UO3 and ADU as Type M, and UO4 as Type F based on the ICRP Publication 71 criteria. Dose coefficients were also calculated for each pure compound, and average values for each type of pure compound were compared with those derived using default values. Finally, the lung retention kinetics and urinary excretion rates for inhaled U03 were compared using material-specific and default absorption parameters, in order to give a practical example of the application of this study.

Adsorption↗

PubMed2002

[Specific parameters for the calculation of dose after aerosol inhalation of transuranium elements].

A review on specific parameter measurements to calculate doses per unit of incorporation according to recommendations of the International Commission of Radiological Protection has been performed for inhaled actinide oxides. Alpha activity distribution of the particles can be obtained by autoradiography analysis using aerosol sampling filters at the work places. This allows us to characterize granulometric parameters of "pure" actinide oxides, but complementary analysis by scanning electron microscopy is needed for complex aerosols. Dissolution parameters with their standard deviation are obtained after rat inhalation exposure, taking into account both mechanical lung clearance and actinide transfer to the blood estimated from bone retention. In vitro experiments suggest that the slow dissolution rate might decrease as a function of time following exposure. Dose calculation software packages have been developed to take into account granulometry and dissolution parameters as well as specific physiological parameters of exposed individuals. In the case of poorly soluble actinide oxides, granulometry and physiology appear as the main parameters controlling dose value, whereas dissolution only alters dose distribution. Validation of these software packages are in progress.

Actinoid Series Elements↗

PubMed2001

Effect of absorption parameters on calculation of the dose coefficient: example of classification of industrial uranium compounds.

In the Human Respiratory Tract Model (HRTM) described in ICRP Publication 66, time-dependent dissolution is described by three parameters: the fraction dissolved rapidly, fr, and the rapid and slow dissolution rates sr and ss. The effect of these parameters on the dose coefficient has been studied. A theoretical analysis was carried out to determine the sensitivity of the dose coefficient to variations in the values of these absorption parameters. Experimental values of the absorption parameters and the doses per unit intake (DPUI) were obtained from in vitro dissolution tests, or from in vivo experiments with rats, for five industrial uranium compounds UO2, U3O8, UO4, UF4 and a mixture of uranium oxides. These compounds were classified in terms of absorption types (F, M or S) according to ICRP. The overall result was that the factor which has the greatest influence on the dose coefficient was the slow dissolution rate ss. This was verified experimentally, with a variation of 20% to 55% for the DPUI according to the absorption type of the compound. In contrast, the rapid dissolution rate sr had little effect on the dose coefficient, excepted for Type F compounds.

Absorption↗

PubMed2000

Efficacy of 3,4,3-LIHOPO for reducing neptunium retention in the rat after simulated wound contamination.

PURPOSE: The ligand 3,4,3-Li(1,2-HOPO) was tested for Np removal after intramuscular injection of 237Np nitrate in rats. MATERIALS AND METHODS: Two experiments were performed, one with simultaneous injection of neptunium and LIHOPO at dosages ranging from 3 to 200 micromol kg(-1) and the other with delayed administration of LIHOPO 30 micromol kg(-1) from 5 min to 30 min after Np injection. RESULTS: The data obtained after simultaneous injections showed that the ligand dosage effectiveness was not linear and depended on the tissues being considered. For bones, the best results were obtained with 200 micromol kg(-1) LIHOPO, where retention was reduced to 11% of controls. Maximum efficacies for removal in liver and kidney were obtained with 30 micromol kg(-1) LIHOPO, where retention was reduced to 39% and 1.6% of controls, respectively. At higher dosages, LIHOPO seemed to have a reverse effect on these tissues, demonstrated by a significant accumulation of the radionuclide. The delayed administration of LIHOPO dramatically decreased its efficacy. When administered 5 min after Np, LIHOPO was still efficient (60%, 37%, 7% of controls in bone, liver, kidneys, respectively) but not when treatment was delayed to 30 min. CONCLUSIONS: These results demonstrated that LIHOPO was able to complex Np at the wound site but not after translocation to blood.

Animals↗