Search PubMed⌕ Search

Biomedical subjects

E A Stura

Publications and source records attributed to E A Stura.

At least 19 recordsLinked to original sources

Highly specific anti-estradiol antibodies: structural characterisation and binding diversity.

Subtle modulation of antibody-binding properties by protein engineering often lies with an accurate structural and energetic description of how an antigen is recognised. Thus, with the intent to increase the affinity and add a bias in favour of natural estradiol compared with its chemically modified immunogen, we have determined the crystal structure of two anti-estradiol monoclonal antibodies, 10G6D6 and 17E12E5. Although generated against the same estradiol derivative, these antibodies share little sequence identity, which is reflected in dissimilar binding pockets and in different positioning of the steroid. In both antibodies the characteristic 17-hydroxyl group is buried deeply at the bottom of hydrophobic pockets and stabilised by hydrogen bonds. Apart from this similarity, the steroid is oriented differently in the respective binding pockets. The high specificity of both antibodies has been mapped out, and even closely related steroids show low cross-reactivity. The structural studies of the complex formed between 10G6D6 and 6-CMO-estradiol have identified contacts between the 6-CMO coupling linker and an arginine residue from the heavy chain CDR2 segment. This segment is now being targeted by random mutagenesis to select mutants with a preference for natural estradiol compared to the branched hapten.

Amino Acid Sequence↗

Complex between Peptostreptococcus magnus protein L and a human antibody reveals structural convergence in the interaction modes of Fab binding proteins.

BACKGROUND: Peptostreptococcus magnus protein L (PpL) is a multidomain, bacterial surface protein whose presence correlates with virulence. It consists of up to five homologous immunoglobulin binding domains that interact with the variable (VL) regions of kappa light chains found on two thirds of mammalian antibodies. RESULTS: We refined the crystal structure of the complex between a human antibody Fab fragment (2A2) and a single PpL domain (61 residues) to 2.7 A. The asymmetric unit contains two Fab molecules sandwiching a single PpL domain, which contacts similar VL framework regions of two light chains via independent interfaces. The residues contacted on VL are remote from the hypervariable loops. One PpL-Vkappa interface agrees with previous biochemical data, while the second is novel. Site-directed mutagenesis and analytical-centrifugation studies suggest that the two PpL binding sites have markedly different affinities for VL. The PpL residues in both interactions are well conserved among different Peptostreptococcus magnus strains. The Fab contact positions identified in the complex explain the high specificity of PpL for antibodies with kappa rather than lambda chains. CONCLUSIONS: The PpL-Fab complex shows the first interaction of a bacterial virulence factor with a Fab light chain outside the conventional combining site. Structural comparison with two other bacterial proteins interacting with the Fab heavy chain shows that PpL, structurally homologous to streptococcal SpG domains, shares with the latter a similar binding mode. These two bacterial surface proteins interact with their respective immunoglobulin regions through a similar beta zipper interaction.

Amino Acid Sequence↗

Crystal structure of alkaline phosphatase from human placenta at 1.8 A resolution. Implication for a substrate specificity.

Human placental alkaline phosphatase (PLAP) is one of three tissue-specific human APs extensively studied because of its ectopic expression in tumors. The crystal structure, determined at 1.8-A resolution, reveals that during evolution, only the overall features of the enzyme have been conserved with respect to Escherichia coli. The surface is deeply mutated with 8% residues in common, and in the active site, only residues strictly necessary to perform the catalysis have been preserved. Additional structural elements aid an understanding of the allosteric property that is specific for the mammalian enzyme (Hoylaerts, M. F., Manes, T., and Millán, J. L. (1997) J. Biol. Chem. 272, 22781-22787). Allostery is probably favored by the quality of the dimer interface, by a long N-terminal alpha-helix from one monomer that embraces the other one, and similarly by the exchange of a residue from one monomer in the active site of the other. In the neighborhood of the catalytic serine, the orientation of Glu-429, a residue unique to PLAP, and the presence of a hydrophobic pocket close to the phosphate product, account for the specific uncompetitive inhibition of PLAP by l-amino acids, consistent with the acquisition of substrate specificity. The location of the active site at the bottom of a large valley flanked by an interfacial crown-shaped domain and a domain containing an extra metal ion on the other side suggest that the substrate of PLAP could be a specific phosphorylated protein.

Alkaline Phosphatase↗

Crystal structure of a Staphylococcus aureus protein A domain complexed with the Fab fragment of a human IgM antibody: structural basis for recognition of B-cell receptors and superantigen activity.

Staphylococcus aureus produces a virulence factor, protein A (SpA), that contains five homologous Ig-binding domains. The interactions of SpA with the Fab region of membrane-anchored Igs can stimulate a large fraction of B cells, contributing to lymphocyte clonal selection. To understand the molecular basis for this activity, we have solved the crystal structure of the complex between domain D of SpA and the Fab fragment of a human IgM antibody to 2.7-A resolution. In the complex, helices II and III of domain D interact with the variable region of the Fab heavy chain (V(H)) through framework residues, without the involvement of the hypervariable regions implicated in antigen recognition. The contact residues are highly conserved in human V(H)3 antibodies but not in other families. The contact residues from domain D also are conserved among all SpA Ig-binding domains, suggesting that each could bind in a similar manner. Features of this interaction parallel those reported for staphylococcal enterotoxins that are superantigens for many T cells. The structural homology between Ig V(H) regions and the T-cell receptor V(beta) regions facilitates their comparison, and both types of interactions involve lymphocyte receptor surface remote from the antigen binding site. However, T-cell superantigens reportedly interact through hydrogen bonds with T-cell receptor V(beta) backbone atoms in a primary sequence-independent manner, whereas SpA relies on a sequence-restricted conformational binding with residue side chains, suggesting that this common bacterial pathogen has adopted distinct molecular recognition strategies for affecting large sets of B and T lymphocytes.

Amino Acid Sequence↗

Crystallization and preliminary crystallographic investigations of avian 5-aminoimidazole-4-carboxamide ribonucleotide transformylase-inosine monophosphate cyclohydrolase expressed in Escherichia coli.

ATIC [5-aminoimidazole-4-carboxamide ribonucleotide transformylase (AICAR Tfase)-inosine monophosphate cyclohydrolase (IMPCH)] is a bifunctional enzyme that catalyzes the penultimate and final steps in the de novo purine biosynthesis pathway and thus is an attractive anticancer target. Recombinant avian ATIC has been purified from an Escherichia coli expression system and crystallized in a binary complex with methotrexate (MTX). Crystals were obtained from PEG 4000 or MPEG 5000 buffered at pH 7.0-7.2 and data were collected from a single crystal at 96 K to 2.3 A resolution at the Stanford Synchrotron Radiation Laboratory (SSRL). The crystals are monoclinic and belong to space group P2(1), with unit-cell dimensions a = 65.17, b = 105.93, c = 103.47 A, beta = 108.27 degrees. Assuming two molecules per asymmetric unit, the Matthews coefficient V(m) is 2.63 A(3) Da(-1) and the solvent volume is 52.9%.

Animals↗

Structures of feline immunodeficiency virus dUTP pyrophosphatase and its nucleotide complexes in three crystal forms.

dUTP pyrophosphatase (dUTPase) cleaves the alpha-beta phosphodiester of dUTP to form pyrophosphate and dUMP, preventing incorporation of uracil into DNA and providing the substrate for thymine synthesis. Seven crystal structures of feline immunodeficiency virus (FIV) dUTPase in three crystal forms have been determined, including complexes with substrate (dUTP), product (dUMP) or inhibitor (dUDP) bound. The native enzyme has been refined at 1.40 A resolution in a hexagonal crystal form and at 2.3 A resolution in an orthorhombic crystal form. In the dUDP complex in a cubic crystal form refined at 2.5 A resolution, the C-terminal conserved P-loop motif is fully ordered. The analysis defines the roles of five sequence motifs in interaction with uracil, deoxyribose and the alpha-, beta- and gamma-phosphates. The enzyme utilizes adaptive recognition to bind the alpha- and beta-phosphates. In particular, the alpha-beta phosphodiester adopts an unfavorable eclipsed conformation in the presence of the P-loop. This conformation may be relevant to the mechanism of alpha-beta phosphodiester bond cleavage.

Animals↗

Crystallographic evidence for preformed dimers of erythropoietin receptor before ligand activation.

Erythropoietin receptor (EPOR) is thought to be activated by ligand-induced homodimerization. However, structures of agonist and antagonist peptide complexes of EPOR, as well as an EPO-EPOR complex, have shown that the actual dimer configuration is critical for the biological response and signal efficiency. The crystal structure of the extracellular domain of EPOR in its unliganded form at 2.4 angstrom resolution has revealed a dimer in which the individual membrane-spanning and intracellular domains would be too far apart to permit phosphorylation by JAK2. This unliganded EPOR dimer is formed from self-association of the same key binding site residues that interact with EPO-mimetic peptide and EPO ligands. This model for a preformed dimer on the cell surface provides insights into the organization, activation, and plasticity of recognition of hematopoietic cell surface receptors.

Cell Membrane↗

The CuA domain of Thermus thermophilus ba3-type cytochrome c oxidase at 1.6 A resolution.

The structure of the CuA-containing, extracellular domain of Thermus thermophilus ba3-type cytochrome c oxidase has been determined to 1.6 A resolution using multiple X-ray wavelength anomalous dispersion (MAD). The Cu2S2 cluster forms a planar rhombus with a copper-copper distance of 2.51 +/- 0.03 A. X-ray absorption fine-structure (EXAFS) studies show that this distance is unchanged by crystallization. The CuA center is asymmetrical; one copper is tetrahedrally coordinated to two bridging cysteine thiolates, one histidine nitrogen and one methionine sulfur, while the other is trigonally coordinated by the two cysteine thiolates and a histidine nitrogen. Combined sequence-structure alignment of amino acid sequences reveals conserved interactions between cytochrome c oxidase subunits I and II.

Amino Acid Sequence↗

On the role of the cis-proline residue in the active site of DsbA.

In addition to the Cys-Xaa-Xaa-Cys motif at position 30-33, DsbA, the essential catalyst for disulfide bond formation in the bacterial periplasm shares with other oxidoreductases of the thioredoxin family a cis-proline in proximity of the active site residues. In the variant DsbA(P151A), this residue has been changed to an alanine, an almost isosteric residue which is not disposed to adopt the cis conformation. The substitution strongly destabilized the structure of DsbA, as determined by the decrease in the free energy of folding. The pKa of the thiol of Cys30 was only marginally decreased. Although in vivo the variant appeared to be correctly oxidized, it exhibited an activity less than half that of the wild-type enzyme with respect to the folding of alkaline phosphatase, used as a reporter of the disulfide bond formation in the periplasm. DsbA(P151A) crystallized in a different crystal form from the wild-type protein, in space group P2(1) with six molecules in the asymmetric unit. Its X-ray structure was determined to 2.8 A resolution. The most significant conformational changes occurred at the active site. The loop 149-152 adopted a new backbone conformation with Ala151 in a trans conformation. This rearrangement resulted in the loss of van der Waals interactions between this loop and the disulfide bond. His32 from the Cys-Xaa-Xaa-Cys sequence presented in four out of six molecules in the asymmetric unit a gauche conformation not observed in the wild-type protein. The X-ray structure and folding studies on DsbA(P151A) were consistent with the cis-proline playing a major role in the stabilization of the protein. A role for the positioning of the substrate is discussed. These important properties for the enzyme function might explain the conservation of this residue in DsbA and related proteins possessing the thioredoxin fold.

Bacterial Proteins↗

Structure of Azotobacter vinelandii 7Fe ferredoxin at 1.35 A resolution and determination of the [Fe-S] bonds with 0.01 A accuracy.

The crystal structure of Azotobacter vinelandii ferredoxin I (FdI) at 100 K has been refined at 1.35 A resolution by full matrix block diagonal least-squares methods with anisotropic temperature factors for all non-hydrogen atoms and with hydrogen atoms included in the model. Fe-S bonds within the [3Fe-4S]+ and [4Fe-4S]2+ clusters of the protein are determined with an accuracy of at least 0.01 A. Analysis of metric parameters reveals greater variation in bonds and angles within the [3Fe-4S]+ cluster than in the [4Fe-4S]2+ cluster, whereas the opposite is true regarding the cysteine Sgamma atoms ligating to the two [Fe-S] cores. The [3Fe-4S]+ core is asymmetrically distorted by the protein matrix but relatively uniformly ligated by its three Cys ligands; in contrast the tetrahedral [4Fe-4S]2+ core is relatively symmetric but non-uniformily ligated by its four Cys ligands, three of which occur in a conserved CysxxCysxxCys residue motif. Comparison of the [3Fe-4S]+ clusters in FdI and Desulfovibrio gigas ferredoxin II, refined at 1.7 A resolution, indicates that within the limit of accuracy of the two refinements the cuboidal core is differently distorted in the two proteins. Comparison of the [3Fe-4S]+ core in FdI with the structure of a reduced [Fe3S4]o synthetic analog indicates that the protein-bound cluster displays distortions not intrinsic to the core itself. Nevertheless, both [3Fe-4S]+ and [Fe3S4]o cores have metric features consistent with expected trends due to net charge on Fe and valency of S, and both exhibit a splayed configuration with respect to their three mu2S atoms in the absence of a fourth Fe. Comparison of the [4Fe-4S]2+ cluster in FdI with the structures of [Fe4S4]2+ synthetic analogs shows that the protein bound and synthetic cubanes are very similar in geometric parameters, including the presence of tetragonal distortion in the FdI cluster common to this oxidation state.

Azotobacter vinelandii↗

An antibody exo Diels-Alderase inhibitor complex at 1.95 angstrom resolution.

A highly specific Diels-Alder protein catalyst was made by manipulating the antibody repertoire of the immune system. The catalytic antibody 13G5 catalyzes a disfavored exo Diels-Alder transformation in a reaction for which there is no natural enzyme counterpart and that yields a single regioisomer in high enantiomeric excess. The crystal structure of the antibody Fab in complex with a ferrocenyl inhibitor containing the essential haptenic core that elicited 13G5 was determined at 1.95 angstrom resolution. Three key antibody residues appear to be responsible for the observed catalysis and product control. Tyrosine-L36 acts as a Lewis acid activating the dienophile for nucleophilic attack, and asparagine-L91 and aspartic acid-H50 form hydrogen bonds to the carboxylate side chain that substitutes for the carbamate diene substrate. This hydrogen-bonding scheme leads to rate acceleration and also pronounced stereoselectivity. Docking experiments with the four possible ortho transition states of the reaction explain the specific exo effect and suggest that the (3R,4R)-exo stereoisomer is the preferred product.

Antibodies, Catalytic↗

Identification of a 13 amino acid peptide mimetic of erythropoietin and description of amino acids critical for the mimetic activity of EMP1.

To obtain information about the functional importance of amino acids required for effective erythropoietin (EPO) mimetic action, the conserved residues of a peptide mimetic of EPO, recently discovered by phage display, were subjected to an alanine replacement strategy. Further, to identify a minimal mimetic peptide sequence, a series of truncation peptides has been generated. One EPO mimetic peptide sequence, EMP1, was targeted and more than 25 derivatives of this sequence were evaluated for their ability to compete with [125I]EPO for receptor binding and for their ability to support the proliferation of two EPO-responsive cell lines. Two hydrophobic amino acids, Tyr4 and Trp13, appear essential for mimetic action, and aromatic residues appear to be important at these sites. These findings are consistent with the previously reported X-ray crystal structure of EMP1 complexed with the extracellular domain of the EPO receptor (EPO binding protein; EBP). In our efforts to define the structural elements required for EPO mimetic action, a 13 amino acid peptide was identified which possesses mimetic properties and contains a minimal agonist epitope. The ability of this peptide to effectively serve as a mimetic capable of the induction of EPO-responsive cell proliferation appears to reside within a single residue, equivalent to position Tyr4 of EMP1, when present in a sequence that includes the cyclic core peptide structure. Although these peptides are less potent than EPO, they should serve as an excellent starting point for the design of compounds with EPO mimetic activity.

Alanine↗

The mechanism of an inhibitory antibody on TF-initiated blood coagulation revealed by the crystal structures of human tissue factor, Fab 5G9 and TF.G9 complex.

The tissue factor (TF)-initiated blood coagulation protease cascade can be greatly inhibited in vivo by a potent anti-human-TF monoclonal antibody, 5G9. This antibody binds the carboxyl module of the extracellular domain of TF with a nanomolar binding constant and inhibits the formation of the TF.VIIa.X ternary initiation complex. We have determined the crystal structures of the extra-cellular modules of human TF, Fab 5G9, and their complex (TF.5G9) to 2.4 A, 2. 5 A, and 3.0 A, respectively, and measured the apparent inhibition constants of 5G9 on a panel of TF mutants. In our unliganded TF structure, a 7 degrees change in the relative orientation between the D1 and D2 modules was observed when compared with other published TF structures. Comparison of the free and bound Fab 5G9 indicates that small segmental and side chain variation of the antibody complementarity determining regions occurred on complexation with TF. The antibody-antigen recognition involves 18 TF antigen residues and 19 Fab residues from six CDR with one of the largest buried surface areas seen to date. A combination of structural and mutagenesis data indicate that Tyr156, Lys169, Arg200, and Lys201 play the major role in the antibody recognition. The TF. 5G9 structure provides insights into the mechanism by which the antibody 5G9 inhibits formation of the TF.VIIa.X ternary complex.

Animals↗

Engineering protein for X-ray crystallography: the murine Major Histocompatibility Complex class II molecule I-Ad.

Class II Major Histocompatibility (MHC) molecules are cell surface heterodimeric glycoproteins that play a central role in the immune response by presenting peptide antigens for surveillance by T cells. Due to the inherent instability of the class II MHC heterodimer, and its dependence on bound peptide for proper assembly, the production of electrophoretically pure samples of class II MHC proteins in complex with specific peptides has been problematic. A soluble form of the murine class II MHC molecule, I-Ad, with a leucine zipper tail added to each chain to enhance dimer assembly and secretion, has been produced in Drosophila melanogaster SC2 cells. To facilitate peptide loading, a high affinity ovalbumin peptide was covalently engineered to be attached by a six-residue linker to the amino terminus of the I-Adbeta chain. This modified I-Ad molecule was purified using preparative IEF and one fraction, after removal of the leucine zipper tails, produced crystals suitable for X-ray crystallographic analysis. The protein engineering and purification methods described here should be of general value for the expression of I-A and other class II MHC-peptide complexes.

Amino Acid Sequence↗

An antagonist peptide-EPO receptor complex suggests that receptor dimerization is not sufficient for activation.

Dimerization of the erythropoietin (EPO) receptor (EPOR), in the presence of either natural (EPO) or synthetic (EPO-mimetic peptides, EMPs) ligands is the principal extracellular event that leads to receptor activation. The crystal structure of the extracellular domain of EPOR bound to an inactive (antagonist) peptide at 2.7 A resolution has unexpectedly revealed that dimerization still occurs, but the orientation between receptor molecules is altered relative to active (agonist) peptide complexes. Comparison of the biological properties of agonist and antagonist EMPs with EPO suggests that the extracellular domain orientation is tightly coupled to the cytoplasmic signaling events and, hence, provides valuable new insights into the design of synthetic ligands for EPOR and other cytokine receptors.

Amino Acid Sequence↗

Immune versus natural selection: antibody aldolases with enzymic rates but broader scope.

Structural and mechanistic studies show that when the selection criteria of the immune system are changed, catalytic antibodies that have the efficiency of natural enzymes evolve, but the catalytic antibodies are much more accepting of a wide range of substrates. The catalytic antibodies were prepared by reactive immunization, a process whereby the selection criteria of the immune system are changed from simple binding to chemical reactivity. This process yielded aldolase catalytic antibodies that approximated the rate acceleration of the natural enzyme used in glycolysis. Unlike the natural enzyme, however, the antibody aldolases catalyzed a variety of aldol reactions and decarboxylations. The crystal structure of one of these antibodies identified the reactive lysine residue that was selected in the immunization process. This lysine is deeply buried in a hydrophobic pocket at the base of the binding site, thereby accounting for its perturbed pKa.

Animals↗

Alphabeta T cell receptor interactions with syngeneic and allogeneic ligands: affinity measurements and crystallization.

Cellular immunity is mediated by the interaction of an alphabeta T cell receptor (TCR) with a peptide presented within the context of a major histocompatibility complex (MHC) molecule. Alloreactive T cells have alphabeta TCRs that can recognize both self- and foreign peptide-MHC (pMHC) complexes, implying that the TCR has significant complementarity with different pMHC. To characterize the molecular basis for alloreactive TCR recognition of pMHC, we have produced a soluble, recombinant form of an alloreactive alphabeta T cell receptor in Drosophila melanogaster cells. This recombinant TCR, 2C, is expressed as a correctly paired alphabeta heterodimer, with the chains covalently connected via a disulfide bond in the C-terminal region. The native conformation of the 2C TCR was probed by surface plasmon resonance (SPR) analysis by using conformation-specific monoclonal antibodies, as well as syngeneic and allogeneic pMHC ligands. The 2C interaction with H-2Kb-dEV8, H-2Kbm3-dEV8, H-2Kb-SIYR, and H-2Ld-p2Ca spans a range of affinities from Kd = 10(-4) to 10(-6)M for the syngeneic (H-2Kb) and allogeneic (H-2Kbm3, H-2Ld) ligands. In general, the syngeneic ligands bind with weaker affinities than the allogeneic ligands, consistent with current threshold models of thymic selection and T cell activation. Crystallization of the 2C TCR required proteolytic trimming of the C-terminal residues of the alpha and beta chains. X-ray quality crystals of complexes of 2C with H-2Kb-dEV8, H-2Kbm3-dEV8 and H-2Kb-SIYR have been grown.

Amino Acid Sequence↗