Search PubMed⌕ Search

Biomedical subjects

E A Bayer

Publications and source records attributed to E A Bayer.

At least 37 records · Page 2Linked to original sources
PubMed1999

Matrix-assisted refolding of single-chain Fv- cellulose binding domain fusion proteins.

We describe a method for the isolation of recombinant single-chain antibodies in a biologically active form. The single-chain antibodies are fused to a cellulose binding domain as a single-chain protein that accumulates as insoluble inclusion bodies upon expression in Escherichia coli. The inclusion bodies are then solubilized and denatured by an appropriate chaotropic solvent, then reversibly immobilized onto a cellulose matrix via specific interaction of the matrix with the cellulose binding domain (CBD) moiety. The efficient immobilization that minimizes the contact between folding protein molecules, thus preventing their aggregation, is facilitated by the robustness of the Clostridium thermocellum CBD we use. This CBD is unique in retaining its specific cellulose binding capability when solubilized in up to 6 M urea, while the proteins fused to it are fully denatured. Refolding of the fusion proteins is induced by reducing with time the concentration of the denaturing solvent while in contact with the cellulose matrix. The refolded single-chain antibodies in their native state are then recovered by releasing them from the cellulose matrix in high yield of 60% or better, which is threefold or higher than the yield obtained by using published refolding protocols to recover the same scFvs. The described method should have general applicability for the production of many protein-CBD fusions in which the fusion partner is insoluble upon expression.

Amino Acid Sequence↗
PubMed1999

The cellulosome concept as an efficient microbial strategy for the degradation of insoluble polysaccharides.

The cellulosome is an extracellular supramolecular machine that can efficiently degrade crystalline cellulosic substrates and associated plant cell wall polysaccharides. The cellulosome arrangement can also promote adhesion to the insoluble substrate, thus providing individual microbial cells with a direct competitive advantage in the utilization of the soluble hydrolysis products.

Bacteria↗
PubMed1999

A novel cellulosomal scaffoldin from Acetivibrio cellulolyticus that contains a family 9 glycosyl hydrolase.

A novel cellulosomal scaffoldin gene, termed cipV, was identified and sequenced from the mesophilic cellulolytic anaerobe Acetivibrio cellulolyticus. Initial identification of the protein was based on a combination of properties, including its high molecular weight, cellulose-binding activity, glycoprotein nature, and immuno-cross-reactivity with the cellulosomal scaffoldin of Clostridium thermocellum. The cipV gene is 5,748 bp in length and encodes a 1,915-residue polypeptide with a calculated molecular weight of 199,496. CipV contains an N-terminal signal peptide, seven type I cohesin domains, an internal family III cellulose-binding domain (CBD), and an X2 module of unknown function in tandem with a type II dockerin domain at the C terminus. Surprisingly, CipV also possesses at its N terminus a catalytic module that belongs to the family 9 glycosyl hydrolases. Sequence analysis indicated the following. (i) The repeating cohesin domains are very similar to each other, ranging between 70 and 90% identity, and they also have about 30 to 40% homology with each of the other known type I scaffoldin cohesins. (ii) The internal CBD belongs to family III but differs from other known scaffoldin CBDs by the omission of a 9-residue stretch that constitutes a characteristic loop previously associated with the scaffoldins. (iii) The C-terminal type II dockerin domain is only the second such domain to have been discovered; its predicted "recognition codes" differ from those proposed for the other known dockerins. The putative calcium-binding loop includes an unusual insert, lacking in all the known type I and type II dockerins. (iv) The X2 module has about 60% sequence homology with that of C. thermocellum and appears at the same position in the scaffoldin. (v) Unlike the other known family 9 catalytic modules of bacterial origin, the CipV catalytic module is not accompanied by a flanking helper module, e.g., an adjacent family IIIc CBD or an immunoglobulin-like domain. Comparative sequence analysis of the CipV functional modules with those of the previously sequenced scaffoldins provides new insight into the structural arrangement and phylogeny of this intriguing family of microbial proteins. The modular organization of CipV is reminiscent of that of the CipA scaffoldin from C. thermocellum as opposed to the known scaffoldins from the mesophilic clostridia. The phylogenetic relationship of the different functional modules appears to indicate that the evolution of the scaffoldins reflects a collection of independent events and mechanisms whereby individual modules and other constituents are incorporated into the scaffoldin gene from different microbial sources.

Amino Acid Sequence↗
PubMed1998

Engineering of chicken avidin: a progressive series of reduced charge mutants.

Avidin, a positively charged egg-white glycoprotein, is a widely used tool in biotechnological applications because of its ability to bind biotin strongly. The high pI of avidin (approximately 10.5), however, is a hindrance in certain applications due to non-specific (charge-related) binding. Here we report a construction of a series of avidin charge mutants with pIs ranging from 9.4 to 4.7. Rational design of the avidin mutants was based on known crystallographic data together with comparative sequence alignment of avidin, streptavidin and a set of avidin-related genes which occur in the chicken genome. All charge mutants retained the ability to bind biotin tightly according to optical biosensor interaction analysis. In most cases, their thermal stability characteristics were indistinguishable from those of the wild-type avidin. Our results demonstrate that the charge properties of avidin can be modified without disturbing the crucial biotin-binding activity.

Animals↗
PubMed1998

Cellulosomes-structure and ultrastructure.

The cellulosome is a macromolecular machine, whose components interact in a synergistic manner to catalyze the efficient degradation of cellulose. The cellulosome complex is composed of numerous kinds of cellulases and related enzyme subunits, which are assembled into the complex by virtue of a unique type of scaffolding subunit (scaffoldin). Each of the cellulosomal subunits consists of a multiple set of modules, two classes of which (dockerin domains on the enzymes and cohesin domains on scaffoldin) govern the incorporation of the enzymatic subunits into the cellulosome complex. Another scaffoldin module-the cellulose-binding domain-is responsible for binding to the substrate. Some cellulosomes appear to be tethered to the cell envelope via similarly intricate, multiple-domain anchoring proteins. The assemblage is organized into dynamic polycellulosomal organelles, which adorn the cell surface. The cellulosome dictates both the binding of the cell to the substrate and its extracellular decomposition to soluble sugars, which are then taken up and assimilated by normal cellular processes.

Cell Membrane↗
PubMed1998

Cellulose, cellulases and cellulosomes.

The structural complexity and rigidity of cellulosic substrates have given rise to a phenomenal diversity of degradative enzymes--the cellulases. Cellulolytic microorganisms produce a wide variety of different catalytic and noncatalytic enzyme modules, which form the cellulases and act synergistically on their substrate. In some microbes, several types of cellulases are organized into an elaborate multifunctional supramolecular complex, known as the cellulosome. A combination of molecular genetic, biochemical, chemical, crystallographic and microscopic techniques are paving the way for new insights into both the structure of cellulose and the mechanisms of its hydrolysis.

Bacteria↗
PubMed1997

A cohesin domain from Clostridium thermocellum: the crystal structure provides new insights into cellulosome assembly.

BACKGROUND: The scaffoldin component of the cellulolytic bacterium Clostridium thermocellum is a non-hydrolytic protein which organizes the hydrolytic enzymes in a large complex, called the cellulosome. Scaffoldin comprises a series of functional domains, amongst which is a single cellulose-binding domain and nine cohesin domains which are responsible for integrating the individual enzymatic subunits into the complex. The cohesin domains are highly conserved in their primary amino acid sequences. These domains interact with a complementary domain, termed the dockerin domain, one of which is located on each enzymatic subunit. The cohesin-dockerin interaction is the crucial interaction for complex formation in the cellulosome. The determination of structural information about the cohesin domain will provide insights into cellulosome assembly and activity. RESULTS: We have determined the three-dimensional crystal structure of one of the cohesin domains from C. thermocellum (cohesin 2) at 2.15 A resolution. The domain forms a nine-stranded beta sandwich with a jelly-roll topology, somewhat similar to the fold displayed by its neighboring cellulose-binding domain. CONCLUSIONS: The compact nature of the cohesin structure and its lack of a defined binding pocket suggests that binding between the cohesin and dockerin domains is characterized by interactions between exposed surface residues. As the cohesin-dockerin interaction appears to be rather nonselective, the binding face would presumably be characterized by surface residues which exhibit both intraspecies conservation and interspecies dissimilarity. Within the same species, unconserved surface residues may reflect the position of a given cohesin domain within the scaffoldin subunit, its orientation and interactions with neighboring domains.

Amino Acid Sequence↗
PubMed1997

Crystallization and preliminary X-ray analysis of a cohesin domain of the cellulosome from Clostridium thermocellum.

Recombinant cohesin-2, a unique type of protein-recognition domain from the cellulosome of Clostridium thermocellum, has been crystallized by the hanging-drop vapor-diffusion method. The crystals are monoclinic, space group C2 with unit-cell dimensions a = 79.91, b = 47.86, c = 51.13 A, beta = 126.77 degrees. There is most likely to be one molecule per asymmetric unit, corresponding to a packing density of 2.16 A(3) Da(-1). The crystals diffract to beyond 2.3 A on a conventional laboratory rotating-anode source.

Journal Article↗
PubMed1997

Production of biologically active recombinant avidin in baculovirus-infected insect cells.

An efficient lepidopteran insect cell system was established for the expression of a recombinant form of chicken egg-white avidin. The gene product was obtained in both secreted and intracellular forms, and biologically active recombinant avidin was isolated using affinity chromatography on an iminobiotin-agarose column. Similar to the known quaternary structure of the native egg-white protein, the purified recombinant protein was glycosylated and assembled mainly into tetramers. Like native avidin, the recombinant tetramer also exhibited a high level of thermostability, and was further stabilized upon binding biotin. The biotin-binding and structural properties of the recombinant avidin are thus similar to those of the natural egg-white protein, and the insect system is appropriate both for future site-directed mutagenesis studies and for the production of avidin fusion proteins.

Animals↗
PubMed1997

Species-specificity of the cohesin-dockerin interaction between Clostridium thermocellum and Clostridium cellulolyticum: prediction of specificity determinants of the dockerin domain.

The cross-species specificity of the cohesin-dockerin interaction, which defines the incorporation of the enzymatic subunits into the cellulosome complex, has been investigated. Cohesin-containing segments from the cellulosomes of two different species, Clostridium thermocellum and Clostridium cellulolyticum, were allowed to interact with cellulosomal (dockerin-containing) enzymes from each species. In both cases, the cohesin domain of one bacterium interacted with enzymes from its own cellulosome in a calcium-dependent manner, but the same cohesin failed to recognize enzymes from the other species. Thus, in the case of these two bacteria, the cohesin-dockerin interaction seems to be species-specific. Based on intra- and cross-species sequence comparisons among the different dockerins together with their known specificities, we tender a prediction as to the amino-acid residues critical to recognition of the cohesins. The suspected residues were narrowed down to only four, which comprise a repeated pair located within the calcium-binding motif of two duplicated sequences, characteristic of the dockerin domain. According to the proposed model, these four residues do not participate in the binding of calcium per se; instead, they appear to serve as recognition codes in promoting interaction with the cohesin surface.

Amino Acid Sequence↗
PubMed1996

Immobilized nitro-avidin and nitro-streptavidin as reusable affinity matrices for application in avidin-biotin technology.

Chemically modified forms of egg-white avidin and bacterial streptavidin (termed nitro-avidin and nitro-streptavidin, respectively), in which the binding-site tyrosine was nitrated, were used for several biotechnological applications. The fundamental difference between nitro-avidin and the native protein is that interaction of the modified protein with biotin can be reversed under relatively mild conditions. Consequently, nitro-avidin affinity columns or immobilizing matrices can be reused. Three examples are given to demonstrate the possible uses of such columns: (a) biotinylated protein A was attached to a nitro-avidin affinity column, and immunoglobulin was purified directly from whole rabbit serum; (b) biotinylated transferrin was attached to a nitro-streptavidin column, and anti-transferrin was isolated directly from rabbit anti-serum; and (c) biotinylated beta-glucosidase was immobilized onto a nitro-avidin column and used as an enzyme reactor. In each example, the immobilized biotinylated probe could be released selectively from the column and recovered following its utilization. Reusable nitro-avidin thus provides an easy and attractive reversible form of avidin and thereby serves to expand the versatility of avidin-biotin technology.

Animals↗
PubMed1996

Recovery of high-affinity phage from a nitrostreptavidin matrix in phage-display technology.

A novel approach for the selection of high-affinity phage from phage-peptide libraries is described. The methodology employs a chemically modified form of streptavidin, termed nitrostreptavidin, which exhibits a reversible attraction for biotin. The new approach emulates conventional procedures in that a biotinylated probe, in this case biotinylated alpha-bungarotoxin, is attached to an immobilized streptavidin matrix. The phage library is introduced, and interacting phage particles are released under conventional acidic conditions (pH 2.2). At this stage, the primary peptide sequences characterizing the released phage are found to be identical with those previously known to interact with the toxin. However, other phage particles, which presumably interact more strongly than those released by acid, remain attached to the immobilized toxin. These can be released by virtue of the reversible biotin-binding properties of nitrostreptavidin. For this purpose, alkaline solutions (pH 10) or free biotin can be used. Using this approach, phage particles that recognize alpha-bungarotoxin were isolated; their peptide sequences were found to be similar to, but clearly distinct from, those collected by conventional acid elution. The affinity of the isolated phage was dramatically higher than that of phage obtained by the conventional methodology. In contrast, their synthetically prepared 15-mer peptides actually exhibited a lower affinity for the toxin than that shown by peptides prepared on the basis of the sequence obtained from conventional acid-eluted phage. This apparent discrepancy can be explained by an altered conformational state of the peptides in solution, compared to the epitopes expressed in situ on the phage surface.

Adsorption↗
PubMed1996

Expression, purification and crystallization of a cohesin domain from the cellulosome of Clostridium thermocellum.

The cellulosome of the cellulolytic bacterium, Clostridium thermocellum, is a multi-enzyme complex in which the enzymatic (cellulolytic) subunits are attached to a unique nonhydrolytic subunit called scaffoldin. The attachment is mediated by two mutually interacting domains: namely multiple cohesin domains on the scaffoldin subunit and a dockerin domain on each of the enzymatic subunits. Knowledge of the three-dimensional structure of each of the interacting components would be critical to a better understanding of the cohesin-dockerin interaction at the molecular level. In this report, we describe the purification of one of the nine cohesin domains of the scaffoldin subunit from C. thermocellum. A DNA segment containing the cohesin 2 sequence was fused to a hexa-histidine tag, and the resultant construct was expressed in Escherichia coli. The expressed peptide was efficiently isolated by metal-chelate affinity chromatography. The purified recombinant form of the cohesin was crystallized pending determination of its structure.

Amino Acid Sequence↗
PubMed1996

Crystal structure of a bacterial family-III cellulose-binding domain: a general mechanism for attachment to cellulose.

The crystal structure of a family-III cellulose-binding domain (CBD) from the cellulosomal scaffoldin subunit of Clostridium thermocellum has been determined at 1.75 A resolution. The protein forms a nine-stranded beta sandwich with a jelly roll topology and binds a calcium ion. conserved, surface-exposed residues map into two defined surfaces located on opposite sides of the molecule. One of these faces is dominated by a planar linear strip of aromatic and polar residues which are proposed to interact with crystalline cellulose. The other conserved residues are contained in a shallow groove, the function of which is currently unknown, and which has not been observed previously in other families of CBDs. On the basis of modeling studies combined with comparisons of recently determined NMR structures for other CBDs, a general model for the binding of CBDs to cellulose is presented. Although the proposed binding of the CBD to cellulose is essentially a surface interaction, specific types and combinations of amino acids appear to interact selectively with glucose moieties positioned on three adjacent chains of the cellulose surface. The major interaction is characterized by the planar strip of aromatic residues, which align along one of the chains. In addition, polar amino acid residues are proposed to anchor the CBD molecule to two other adjacent chains of crystalline cellulose.

Amino Acid Sequence↗
PubMed1996

Reversibility of biotin-binding by selective modification of tyrosine in avidin.

The tight interaction between the vitamin biotin and the protein avidin is so strong (Ka approximately 10(15) M-1) that conditions which are usually sufficient for protein denaturation fail to dissociate the avidin-biotin complex. In order to form a reversible interaction between the two biomolecules, we have modified the binding-site tyrosine by nitration, thus reducing the pKa of the phenol group which forms a crucial hydrogen bond with the ureido group of biotin. At relatively low pH values (4-5), the resultant modified forms of avidin bind biotin with a very high association constant ( > 10(9) M-1). The modified avidins are thus capable of supporting stable, long-term binding of biotin or biotinylated macro-molecules. The latter molecules can be detached by increasing the pH of the medium or by introduction of excess levels of biotin at neutral pH. These findings demonstrate the importance of a single hydrogen bond for strong biotin binding. The new derivatives of avidin should be useful for applications whereby a reversible interaction between the four biotin-binding sites and biotin is desired, thus increasing the versatility of the avidin-biotin system for biotechnological application.

Avidin↗
PubMed1996

Sodium dodecyl sulfate-polyacrylamide gel electrophoretic method for assessing the quaternary state and comparative thermostability of avidin and streptavidin.

Avidin, a positively charged egg-white protein, aggregates extensively when mixed at ambient temperatures with anionic detergents, such as sodium dodecyl sulfate (SDS). The resultant aggregates fail to penetrate the stacking gel during polyacrylamide gel electrophoresis (PAGE). To prevent the formation of such aggregates, avidin was acetylated and the pI was thus reduced. Acetylated avidin was found to behave in a manner similar to that of streptavidin; under nondenaturing conditions (i.e., incubation of samples at room temperature), both proteins normally migrated mainly as tetramers with a tendency to form oligomers of the tetramer. When samples were boiled, both proteins migrated mainly as the monomer. The comparative stability properties of avidin and streptavidin were also examined using SDS-PAGE by heating samples and determining the extent of dissociation of tetramers to monomers as a function of temperature. A distinctive transition temperature could be defined for individual samples. Using this assay, it was determined that, in the absence of biotin, the quaternary structure of streptavidin is more stable than that of avidin. Biotin appears to stabilize structures of both avidin and streptavidin to a similar degree. Acetylation of avidin thus provides a simple means to analyze the quaternary structure of the molecule using SDS-PAGE.

Avidin↗
PubMed1995

Close similarity among streptavidin-like, biotin-binding proteins from Streptomyces.

Two strains of Streptomyces venezuelae were found to produce high-affinity, biotin-binding proteins, termed streptavidin v1 and v2, respectively. Both proteins were isolated to purity, and their corresponding genes were cloned and sequenced. Compared to streptavidin from S. avidinii, streptavidin v1 had only a single amino acid substitution and streptavidin v2 showed 9 such differences. The substitutions were remarkably conservative, none of which affected the amino acid residues known to be important to the biotin-binding properties or to the structure of the tetrameric protein. The results also indicate that the biosynthesis of such biotin-binding proteins is not simply a curious anomaly in a single species of Streptomyces. It is suggested that the classification of S. avidinii as a unique species should be reconsidered. The occurrence of these proteins appears to be linked to the production of an unusual synergistic antibiotic complex.

Amino Acid Sequence↗