Biomedical subjects

Dominique P Pioletti

Publications and source records attributed to Dominique P Pioletti.

11 recordsLinked to original sources

PubMed2006

Bone tissue engineering using foetal cell therapy.

Different cell sources for bone tissue engineering are reviewed. In particular, adult cell source strategies have been based on the implantation of unfractionated fresh bone marrow; purified, culture expanded mesenchymal stem cells, differentiated osteoblasts, or cells that have been modified genetically to express rhBMP. Several limiting factors are mentioned for these strategies such as low number of available cells or possible immunological reaction of the host. Foetal bone cells are presented as an alternative solution and review of actual treatments using these cells is presented. Finally, foetal cells used specifically for bone tissue engineering are characterised and potentially interesting therapeutic options are proposed.

Bone Regeneration↗

PubMed2006

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

Patients with osteoporosis and joint disabilities represent a constant growing and challenging population to be treated in the musculoskeletal clinical field. Especially in the case of total hip arthroplasty, new solutions should be developed to compensate for the double negative factors, peri-implant osteolysis, and osteoporotic bone loss, affecting the quality of implant outcome. The goal of this study was then to establish a proof of concept for orthopedic implant used as Zoledronate delivery in osteoporotic rats, and in particular, to verify if this approach could increase the initial implant stability. Twenty-five female 6-month-old Wistar rats were ovariectomized 6 weeks before the implantation to induce osteoporosis. The animals were randomly separated in five groups representing the different Zoledronate concentrations in the HA coating: 0, 0.2, 2.1, 8.5, and 16 microg/implant. Histomorphometric measures and peri-implant bone volume fraction were assessed and mechanical stability tests were performed. Bone volume fraction and biomechanical results clearly illustrate the positive effect of Zoledronate coated implants in the osteoporotic rats. A remarkable result was to show the existence of a window of Zoledronate content (0.2 to 8.5 microg/implant) in which the mechanical fixation of the implant increased. We were able to establish the proof of concept for orthopedic implants used as a drug delivery system in osteoporotic rats. The local bisphosphonate delivery from a calcium phosphate coating allowed increase of the mechanical fixation of an orthopedic implant. This study shows that orthopedic implants containing bisphosphonates could be beneficial for osteoporotic patients in need of a total joint replacement.

Animals↗

PubMed2005

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering.

Bone is a complex porous composite structure with specific characteristics such as viscoelasticity and anisotropy, both in morphology and mechanical properties. Bone defects are regularly filled with artificial tissue grafts, which should ideally have properties similar to those of natural bone. Open cell composite foams made of bioresorbable poly(L-lactic acid) (PLA) and ceramic fillers, hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), were processed by supercritical CO2 foaming. Their internal 3D-structure was then analysed by micro-computed tomography (microCT), which evidenced anisotropy in morphology with pores oriented in the foaming direction. Furthermore compressive tests demonstrated anisotropy in mechanical behaviour, with an axial modulus up to 1.5 times greater than the transverse modulus. Composite scaffolds also showed viscoelastic behaviour with increased modulus for higher strain rates. Such scaffolds prepared by gas foaming of polymer composite materials therefore possess suitable architecture and properties for bone tissue engineering applications.

Anisotropy↗

PubMed2004

The influence of wear particles in the expression of osteoclastogenesis factors by osteoblasts.

Orthopedic implant failures are often associated with peri-implant osteolysis. Particles generated from the wear process have been suspected to play an important role in this situation. Indeed, the peri-implant osteolysis could be due to the presence of particles stimulating the osteoclastogenesis process. We hypothesize then that the presence of a low particle concentration positively influences osteoblasts to produce osteoclastogenesis factors. If true, this hypothesis would then support the idea that the particles could be at the origin of the process leading to implant loosening. To check the validity of this hypothesis, we quantified in vitro the production of different genes involved in the osteoclastogenesis process using primary isolated human osteoblasts treated or not with particles. Results showed that low concentrations of particles might have a stimulating effect on osteoblasts to produce osteoclastogenesis factors as demonstrated by the increase of RANKL and CSF-1 gene expression in the particle group.

Biocompatible Materials↗

PubMed2004

Fetal bone cells for tissue engineering.

We envision the use of human fetal bone cells for engineered regeneration of adult skeletal tissue. A description of their cellular function is then necessary. To our knowledge, there is no description of human primary fetal bone cells treated with differentiation factors. The characterization of fetal bone cells is particularly important as the pattern of secreted proteins from osteoblasts has been shown to change during aging. In the first part of this work, human primary fetal bone cells were compared to adult bone cells and mesenchymal stem cells for their ability to proliferate and to differentiate into osteoblasts in vitro. Cell proliferation, gene expression of bone markers, alkaline phosphatase (ALP) activity, and mineralization were analyzed during a time-course study. In the second part of this paper, bone fetal cells behavior exposed to osteogenic factors is further detailed. The doubling time of fetal bone cells was comparable to mesenchymal stem cells but significantly shorter than for adult bone cells. Gene expression of cbfa-1, ALP, alpha1 chain of type I collagen, and osteocalcin were upregulated in fetal bone cells after 12 days of treatment, with higher inductions than for adult and mesenchymal stem cells. The increase of ALP enzymatic activity was stronger for fetal than for adult bone cells reaching a maximum at day 10, but lower than for mesenchymal stem cells. Importantly, the mineralization process of bone fetal cells started earlier than adult bone and mesenchymal stem cells. Proliferation of fetal and adult bone cells was increased by dexamethasone, whereas 1alpha,25-dihydroxyvitamin D3 did not show any proliferative effect. Mineralization studies clearly demonstrated the presence of calcium deposits in the extracellular matrix of fetal bone cells. Nodule formation and calcification were strongly increased by the differentiation treatment, especially by dexamethasone. This study shows for the first time that human primary fetal bone cells could be of great interest for bone research, due to their fast growth rate and their ability to differentiate into mature osteoblasts. They represent an interesting and promising potential for therapeutic use in bone tissue engineering.

Adult↗

PubMed2004

Can the increase of bone mineral density following bisphosphonates treatments be explained by biomechanical considerations?

OBJECTIVE: We hypothesized that bone mineral density increase following bisphosphonates treatments may be explained by the influence of the drug on the mechanical bone remodeling parameters. BACKGROUND: Patients treated with bisphosphonates continuously increase their bone mineral density. This increase is explained in the first 12-18 months following the treatment by the filling of the transient remodeling deficit. Recently, results of a clinical study of alendronate treatment over 7 years still show a continuous increase of bone mineral density. These results raised several questions regarding our understanding of bisphosphonates mode of action. METHODS: Bone remodeling is influenced by different factors including mechanical forces. In the present study, we propose then to consider the effect of bisphosphonates also under biomechanical considerations. RESULTS: Identification of the model with the clinical data showed that daily treatment of 10 and 20 mg alendronate decreased the bone turnover rate by 2% and 11%, respectively, in comparison with the 5 mg alendronate treatment. Moreover, the alendronate treatments decreases the resorption threshold stimulus by 19% (25%, 28%) for the 5 mg (10 and 20 mg, respectively) compared to placebo. CONCLUSIONS: The increase of bone mineral density following bisphosphonates treatment may then be explained by biomechanical considerations. Based on this description, bisphosphonates treatment may indeed change the susceptibility of bone to its biomechanical environment decreasing the mechanical threshold where bone should undergo resorption.

Alendronate↗

PubMed2003

Effect of micromechanical stimulations on osteoblasts: development of a device simulating the mechanical situation at the bone-implant interface.

Many experimental models have been developed to investigate the effects of mechanical stimulation of cells, but none of the existing devices can simulate micromotions at the cellular-mechanical interface with varying amplitudes and loads. Osteoblasts are sensitive to mechanical stimuli, so to study the bone-implant interface it would be important to quantify their reaction in a situation mimicking the mechanical situation arising at that interface. In this study, we present the development of a new device allowing the application of micromotions and load on cells in vitro. The new device allowed the cells to be stimulated with sinusoidal motions of amplitudes comprised between +/- 5 and +/- 50 microm, frequencies between 0.5 and 2 Hz, and loads between 50 and 1000 Pa. The device, with a total length of 20 cm, was designed to work in an incubator at 37 degrees C and 100% humidity. Expression of various bone important genes was monitored by real-time RT-PCR. Micromotions and load were shown to affect the behavior of osteoblasts by down-regulating the expression of genes necessary for the creation of organic extracellular matrix (collagen type I) as well as for genes involved in the mineralization process (osteocalcin, osteonectin). The developed device could then be used to simulate different mechanical situations at the bone-implant interface.

Bone and Bones↗

PubMed2002

Gene expression analysis of osteoblastic cells contacted by orthopedic implant particles.

Particles generated from orthopedic implants through years of wear play an essential role in the aseptic loosening of a prosthesis. We have investigated the biocompatibility of these orthopedic particles on different osteoblast-like cells representative of different stages of osteoblast maturation. We found the particles induced a caspase-dependent apoptosis of osteoblasts, with less mature osteoblasts being the most susceptible. An analysis of gene expression was performed on the less mature osteoblasts, which were in contact with the particles. We found that the particles had a profound impact on genes that code for inflammatory cytokines and genes involved in controlling the nuclear architecture. Results from this study suggest that the peri-implant osteolysis after a total joint replacement can be due in part to a decrease of bone formation and not solely to an overstimulation of bone resorption as is generally proposed. Development of new drugs that promote normal bone formation and osteoblast survival would possibly control peri-implant osteolysis, resulting in a better prognosis for patients with orthopedic implants.

Animals↗

PubMed2002

Effect of different Ti-6Al-4V surface treatments on osteoblasts behaviour.

The purpose of the present work was to examine the effect of different Ti-6Al-4V surface treatments on osteoblasts behaviour. Previous work in this laboratory has demonstrated that an ageing treatment reduces metal ion release from this alloy compared to standard passivation procedures. In this study. human osteosarcoma MG-63 were used in short-term in vitro tests to assay for cell viability and cell proliferation at 12, 24 and 72 h while SaOS-2 were used in long-term in vitro tests to assay for osteonectin, osteopontin, osteocalcin gene expression, total protein amount (TP). alkaline phosphatase activity (ALP) and fibronectin production (FN) for 1-4 weeks. Epifluorescence microscopy was used to observe SaOS-2 cell morphology. After 24h, there was no difference in MG-63 cell viability proliferation or in SaOS-2 cell morphology between the different surface treatments. For the long-term tests, the aged Ti-6Al4V induced significantly higher cell proliferation than the control Ti-6Al-4V at 72h. At week 1, no difference in the osteonectin, osteopontin, and osteocalcin gene expression was found between samples. The peak of ALP activity appeared earlier at week 2 for the control surface compared with the passivated and aged surfaces. The early increase in ALP activity for the control sample could be a compensatory effect of decreased osteoblasts proliferation. There was no difference in the expression of FN for the different surface treatments. Our present results showed that the different surface treatments, which induced different metal ion release kinetics and surface properties, influenced the cell proliferation and ALP activity of osteoblast cells. Aluminium ions release kinetics as well as presence of vanadium ions may play a major role in influencing the osteoblasts behaviour in the present study.

Alkaline Phosphatase↗

PubMed2002

Large-scale gene expression analysis of osteoblasts cultured on three different Ti-6Al-4V surface treatments.

To improve implant biocompatibility, we developed a simple cost-effective thermal surface treatment allowing an increase in the oxide layer thickness of a titanium (Ti) alloy used in orthopaedic implants. The goal of this study was to test in vitro the reaction of osteoblasts to the developed surface treatment and to compare it to the osteoblast reaction to two other surface treatments currently used in the practice of implant surgery. Quantification of osteoblast gene expression on a large scale was used in this study. The kinetics of gene expression over 120 h was followed for 58 genes to quantify the effect of the developed surface treatment. Twenty eight genes were further selected to compare the effects of surface treatments on osteoblasts. Based on the genes studied, we could propose a general pathway for the cell reaction according to the surface treatments used: (1) metal ion release changes the time course of gene expression in the FAK pathway; (2) once the accumulation of metal ions released from the Ti surface exceeds a threshold value, cell growth is diminished and apoptosis may be activated; (3) PTK up-regulation is also induced by metal ion release; (4) the expression of Bcl-2 family and Bax may suggest that metal ions induce apoptosis. The developed treatment seems to increase the Ti-6Al-4V biocompatibility as highlighted by the lower impact of this treatment by the different pathways studied, on the lower inflammatory reaction that could be induced, as well as by the lower induced osteoblast apoptosis compared to the two other surface treatments.

Alloys↗

PubMedDate not supplied

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells.

The aim of this investigation was to test the biocompatibility of three-dimensional bioresorbable foams made of poly(L-lactic acid) (PLA), alone or filled with hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), with human primary osteoblasts, using a direct contact method. Porous constructs were processed by supercritical gas foaming, after a melt-extrusion of ceramic/polymer mixture. Three neat polymer foams, with pore sizes of 170, 310, and 600 microm, and two composite foams, PLA/5 wt% HA and PLA/5 wt% beta-TCP, were examined over a 4-week culture period. The targeted application is the bone tissue-engineering field. For this purpose, human fetal and adult bone cells were chosen because of their highly osteogenic potential. The association of fetal bone cells and composite scaffold should lead to in vitro bone formation. The polymer and composite foams supported adhesion and intense proliferation of seeded cells, as revealed by scanning electron microscopy. Cell differentiation toward osteoblasts was demonstrated by alkaline phosphatase (ALP) enzymatic activity, gamma-carboxylated Gla-osteocalcin production, and the onset of mineralization. The addition of HA or beta-TCP resulted in higher ALP enzymatic activity for fetal bone cells and a stronger production of Gla-osteocalcin for adult bone cells.

Bone Substitutes↗