Biomedical subjects

David C Deubner

Publications and source records attributed to David C Deubner.

5 recordsLinked to original sources

PubMed2006

Exposure pathway assessment at a copper-beryllium alloy facility.

Controlling beryllium inhalation exposures to comply with regulatory levels (2 micro g m(-3) of air) does not appear to prevent beryllium sensitization and chronic beryllium disease (CBD). Additionally, it has proven difficult to establish a clear inhalation exposure-response relationship for beryllium sensitization and CBD. Thus, skin may be an important route of exposure that leads to beryllium sensitization. A 2000 survey had identified prevalence of sensitization (7%) and CBD (4%) in a beryllium alloy facility. An improved particulate migration control program, including dermal protection in production areas, was completed in 2002 at the facility. The purpose of this study was to evaluate levels of beryllium in workplace air, on work surfaces, on cotton gloves worn by employees over nitrile gloves, and on necks and faces of employees subsequent to implementation of the program. Over a 6 day period, we collected general area air samples (n = 10), wipes from routinely handled work surfaces (n = 252), thin cotton glove samples (n = 113) worn by employees, and neck wipes (n = 109) and face wipes (n = 109) from the same employees. In production, production support and office areas geometric mean (GM) levels of beryllium were 0.95, 0.59 and 0.05 micro g per 100 cm(2) on work surfaces; 42.8, 73.8 and 0.07 micro g per sample on cotton gloves; 0.07, 0.09 and 0.003 micro g on necks; and 0.07, 0.12 and 0.003 micro g on faces, respectively. Correlations were strong between beryllium in air and on work surfaces (r = 0.79), and between beryllium on cotton gloves and on work surfaces (0.86), necks (0.87) and faces (0.86). This study demonstrates that, even with the implementation of control measures to reduce skin contact with beryllium as part of a comprehensive workplace protection program, measurable levels of beryllium continue to reach the skin of workers in production and production support areas. Based on our current understanding of the multiple exposure pathways that may lead to sensitization, we support prudent control practices such as use of protective gloves to minimize skin exposure to beryllium salts and fine particles.

Air Pollutants, Occupational↗

PubMed2006

Assessment of the beryllium lymphocyte proliferation test using statistical process control.

Despite more than 20 years of surveillance and epidemiologic studies using the beryllium blood lymphocyte proliferation test (BeBLPT) as a measure of beryllium sensitization (BeS) and as an aid for diagnosing subclinical chronic beryllium disease (CBD), improvements in specific understanding of the inhalation toxicology of CBD have been limited. Although epidemiologic data suggest that BeS and CBD risks vary by process/work activity, it has proven difficult to reach specific conclusions regarding the dose-response relationship between workplace beryllium exposure and BeS or subclinical CBD. One possible reason for this uncertainty could be misclassification of BeS resulting from variation in BeBLPT testing performance. The reliability of the BeBLPT, a biological assay that measures beryllium sensitization, is unknown. To assess the performance of four laboratories that conducted this test, we used data from a medical surveillance program that offered testing for beryllium sensitization with the BeBLPT. The study population was workers exposed to beryllium at various facilities over a 10-year period (1992-2001). Workers with abnormal results were offered diagnostic workups for CBD. Our analyses used a standard statistical technique, statistical process control (SPC), to evaluate test reliability. The study design involved a repeated measures analysis of BeBLPT results generated from the company-wide, longitudinal testing. Analytical methods included use of (1) statistical process control charts that examined temporal patterns of variation for the stimulation index, a measure of cell reactivity to beryllium; (2) correlation analysis that compared prior perceptions of BeBLPT instability to the statistical measures of test variation; and (3) assessment of the variation in the proportion of missing test results and how time periods with more missing data influenced SPC findings. During the period of this study, all laboratories displayed variation in test results that were beyond what would be expected due to chance alone. Patterns of test results suggested that variations were systematic. We conclude that laboratories performing the BeBLPT or other similar biological assays of immunological response could benefit from a statistical approach such as SPC to improve quality management.

Air Pollutants, Occupational↗

PubMed2006

Sensitization and chronic beryllium disease among workers in copper-beryllium distribution centers.

OBJECTIVE: Little is known about the risk of sensitization and chronic beryllium disease (CBD) among workers performing limited processing of copper-beryllium alloys downstream of the primary beryllium industry. In this study, we performed a cross-sectional survey of employees at three copper-beryllium alloy distribution centers. METHODS: One hundred workers were invited to be tested for beryllium sensitization using the beryllium blood lymphocyte proliferation test (BeLPT); a sensitized worker was further evaluated for CBD. Available beryllium mass concentration air sampling data were obtained for characterization of airborne exposure. RESULTS: One participant, who had exposure to other forms of beryllium, was found to be sensitized and to have CBD, resulting in a prevalence of sensitization/CBD of 1% for all tested. CONCLUSIONS: The overall prevalence of beryllium sensitization and CBD for workers in these three copper-beryllium alloy distribution centers is lower than for workers in primary beryllium production facilities.

Adult↗

PubMed2005

Process-related risk of beryllium sensitization and disease in a copper-beryllium alloy facility.

BACKGROUND: Chronic beryllium disease (CBD), which primarily affects the lungs, occurs in sensitized beryllium-exposed individuals. At a copper-beryllium alloy strip and wire finishing facility we performed a cross-sectional survey to examine prevalences of beryllium sensitization and CBD, and relationships between sensitization and CBD and work areas/processes. METHODS: Current employees (185) were offered beryllium lymphocyte proliferation testing (BeLPT) for sensitization, clinical evaluation for CBD (if sensitized), and questionnaires. We obtained historical airborne beryllium measurements. RESULTS: Participation was 83%. Prevalences of sensitization and CBD were 7% (10/153) and 4% (6/153), respectively; this included employees with abnormal BeLPTs from two laboratories, four diagnosed with CBD during the survey, and one each diagnosed preceding and following the survey. Potential BeLPT laboratory problems were noted; one laboratory was twice as likely to have reported an abnormal result (P < 0.05, all tests), and five times as likely to have reported a borderline or uninterpretable result (P < 0.05, first blood draw and all tests). CBD risk was highest in rod and wire production (P < 0.05), where air levels were highest. CONCLUSIONS: Sensitization and CBD were associated with an area in which beryllium air levels exceeded 0.2 microg/m3, and not with areas where this level was rarely exceeded. Employees at this copper-beryllium alloy facility had similar prevalences of sensitization and CBD as workers at facilities with higher beryllium air levels.

Adult↗

PubMed2005

Beryllium.

Explore the source record for details and available documents.

Berylliosis↗