Search PubMed⌕ Search

Biomedical subjects

David A Weitz

Publications and source records attributed to David A Weitz.

At least 19 recordsLinked to original sources
PubMed2006

Slip, yield, and bands in colloidal crystals under oscillatory shear.

We study dense colloidal crystals under oscillatory shear using a confocal microscope. At large strains the crystals yield and the suspensions form shear bands. The pure harmonic response exhibited by the suspension rules out the applicability of nonlinear rheology models typically used to describe shear banding in other types of complex fluids. Instead, we show that a model based on the coexistence of linearly responding phases of the colloidal suspension accounts for the observed flows. These results highlight a new use of oscillatory measurements in distinguishing the contribution of linear and nonlinear local rheology to a globally nonlinear material response.

Journal Article↗
PubMed2006

Synthesis of nonspherical colloidal particles with anisotropic properties.

We describe a promising and flexible technique for fabricating uniform nonspherical particles with anisotropic phase and surface properties. Our approach is based on the seeded polymerization technique in which monomer-swollen particles are polymerized. The polymerization causes a phase separation to occur, giving rise to two-phase nonspherical particles. We show that the elastic contraction of the swollen polymer particles induced by elevated polymerization temperatures plays an important role in the phase separation. Moreover, chemical anisotropy of nonspherical particles can be obtained by using immiscible polymer pairs and by employing surface treatments. Furthermore, we are able to produce amphiphilic dumbbell particles consisting of two different bulbs: hydrophilic poly (ethylene imine)-coated polystyrene and hydrophobic polystyrene. Controlled geometries of these amphiphilic nonspherical particles will allow a wide range of potential applications, such as engineered colloid surfactants.

Journal Article↗
PubMed2006

Microfluidic assembly of homogeneous and Janus colloid-filled hydrogel granules.

The microfluidic assembly of colloid-filled hydrogel granules of varying shape and composition is described. First, drops are formed by shearing a concentrated colloidal microsphere-acrylamide suspension in a continuous oil phase using a sheath-flow device. Both homogeneous and Janus (hemispherically distinct) spheres and disks are produced by confining the assembled drops in microchannels of varying geometry. Next, photopolymerization is carried out shortly after drop breakup to preserve their morphology. Representative wet and dried granules are characterized using fluorescence and scanning electron microscopy, respectively. Our approach offers a facile route for assembling colloid-filled hydrogel granules with controlled shape and composition.

Colloids↗
PubMed2006

Direct imaging of repulsive and attractive colloidal glasses.

Coherent anti-Stokes Raman scattering microscopy is performed on glassy systems of poly(methylmethacrylate) colloidal particles in density- and refractive-index-matched solvents. Samples are prepared with varying amounts of linear polystyrene, which induces a depletion driven attraction between the nearly hard-sphere particles. Images collected over several hours confirm the existence of a reentrant glass transition. The images also reveal that the dynamics of repulsive and attractive glasses are qualitatively different. Colloidal particles in repulsive glasses exhibit cage rattling and escape, while those in attractive glasses are nearly static while caged but exhibit large displacements upon (infrequent) cage escape.

Journal Article↗
PubMed2006

Fast and slow dynamics of the cytoskeleton.

Material moduli of the cytoskeleton (CSK) influence a wide range of cell functions. There is substantial evidence from reconstituted F-actin gels that a regime exists in which the moduli scale with frequency with a universal exponent of 3/4. Such behaviour is entropic in origin and is attributable to fluctuations in semiflexible polymers driven by thermal forces, but it is not obvious a priori that such entropic effects are responsible for the elasticity of the CSK. Here we demonstrate the existence of such a regime in the living cell, but only at high frequencies. Fast events scaled with frequency in a manner comparable to semiflexible-polymer dynamics, but slow events scaled with a non-universal exponent that was systematically smaller than 3/4 and probably more consistent with a soft-glass regime. These findings strongly suggest that at smaller timescales elasticity arises from entropic fluctuations of a semiflexible-filament network, whereas on longer timescales slow (soft-glass-like) dynamics of a different origin prevail. The transition between these two regimes occurred on timescales of the order of 0.01 s, thus setting within the slow glassy regime cellular events such as spreading, crawling, contracting, and invading.

Actins↗
PubMed2006

Buckling and crumpling of drying droplets of colloid-polymer suspensions.

Spray drying of complex liquids to form solid powders is important in many industrial applications. One of the challenges associated with spray drying is controlling the morphologies of the powders produced; this requires an understanding of how drying mechanics depend on the ingredients and conditions. We demonstrate that the morphology of powders produced by spray drying colloidal polystyrene (PS) suspensions can be significantly altered by changing the molecular weight of dissolved poly(ethylene oxide) (PEO). Samples containing high-molecular-weight PEO produce powders with more crumpled morphologies than those containing low-molecular-weight PEO. Observations of drying droplets suspended by a thin film of vapor suggest that this occurs because the samples with high-molecular-weight PEO buckle earlier in the drying process when the droplets are larger. Earlier buckling times are likely caused by the decreased stability, demonstrated by bulk rheology experiments, of PS particles in the presence of high-molecular-weight PEO at elevated temperatures. We present a consistent picture in which decreased particle stability hastens droplet buckling and leads to more crumpled powder morphologies; this underscores the importance of interparticle forces in determining the buckling of particle-laden droplets.

Journal Article↗
PubMed2006

Microtubules can bear enhanced compressive loads in living cells because of lateral reinforcement.

Cytoskeletal microtubules have been proposed to influence cell shape and mechanics based on their ability to resist large-scale compressive forces exerted by the surrounding contractile cytoskeleton. Consistent with this, cytoplasmic microtubules are often highly curved and appear buckled because of compressive loads. However, the results of in vitro studies suggest that microtubules should buckle at much larger length scales, withstanding only exceedingly small compressive forces. This discrepancy calls into question the structural role of microtubules, and highlights our lack of quantitative knowledge of the magnitude of the forces they experience and can withstand in living cells. We show that intracellular microtubules do bear large-scale compressive loads from a variety of physiological forces, but their buckling wavelength is reduced significantly because of mechanical coupling to the surrounding elastic cytoskeleton. We quantitatively explain this behavior, and show that this coupling dramatically increases the compressive forces that microtubules can sustain, suggesting they can make a more significant structural contribution to the mechanical behavior of the cell than previously thought possible.

Actomyosin↗
PubMed2006

Dewetting instability during the formation of polymersomes from block-copolymer-stabilized double emulsions.

We investigate the formation of polymer vesicles, or polymersomes, of polystyrene-block-poly(ethylene oxide) diblock copolymers using double emulsion droplets of controlled architecture as templates. To engineer the structure of the polymersomes, it is important to consider the concentration of diblock copolymer in the middle phase of the double emulsion. We describe how the presence of excess polymer can induce a transition from complete wetting to partial wetting of the middle phase, resulting in polymer shells with inhomogeneous thicknesses.

Journal Article↗
PubMed2006

Visualizing dislocation nucleation by indenting colloidal crystals.

The formation of dislocations is central to our understanding of yield, work hardening, fracture, and fatigue of crystalline materials. While dislocations have been studied extensively in conventional materials, recent results have shown that colloidal crystals offer a potential model system for visualizing their structure and dynamics directly in real space. Although thermal fluctuations are thought to play a critical role in the nucleation of these defects, it is difficult to observe them directly. Nano-indentation, during which a small tip deforms a crystalline film, is a common tool for introducing dislocations into a small volume that is initially defect-free. Here, we show that an analogue of nano-indentation performed on a colloidal crystal provides direct images of defect formation in real time and on the single particle level, allowing us to probe the effects of thermal fluctuations. We implement a new method to determine the strain tensor of a distorted crystal lattice and we measure the critical dislocation loop size and the rate of dislocation nucleation directly. Using continuum models, we elucidate the relation between thermal fluctuations and the applied strain that governs defect nucleation. Moreover, we estimate that although bond energies between particles are about fifty times larger in atomic systems, the difference in attempt frequencies makes the effects of thermal fluctuations remarkably similar, so that our results are also relevant for atomic crystals.

Journal Article↗
PubMed2006

Fluids of clusters in attractive colloids.

We show that colloidal particles with attractive interactions induced by a nonadsorbing polymer exhibit a stable phase consisting of a fluid of clusters of particles. This phase persists even in the absence of any long-range repulsion due to charge, contrary to expectations based on simulation and theory. Cluster morphology depends strongly on the range of the interparticle attraction: With a shorter range, clusters are tenuous and branched; with a longer range, they are more compact.

Journal Article↗
PubMed2005

Cytoskeletal remodelling and slow dynamics in the living cell.

The cytoskeleton (CSK) is a crowded network of structural proteins that stabilizes cell shape and drives cell motions. Recent studies on the dynamics of the CSK have established that a wide variety of cell types exhibit rheology in which responses are not tied to any particular relaxation times and are thus scale-free. Scale-free rheology is often found in a class of materials called soft glasses, but not all materials expressing scale-free rheology are glassy (see plastics, wood, concrete or some metals for example). As such, the extent to which dynamics of the CSK might be regarded as glassy remained an open question. Here we report both forced and spontaneous motions of microbeads tightly bound to the CSK of human muscle cells. Large oscillatory shear fluidized the CSK matrix, which was followed by slow scale-free recovery of rheological properties (aging). Spontaneous bead motions were subdiffusive at short times but superdiffusive at longer times; intermittent motions reflecting nanoscale CSK rearrangements depended on both the approach to kinetic arrest and energy release due to ATP hydrolysis. Aging, intermittency, and approach to kinetic arrest establish a striking analogy between the behaviour of the living CSK and that of inert non-equilibrium systems, including soft glasses, but with important differences that are highly ATP-dependent. These mesoscale dynamics link integrative CSK functions to underlying molecular events, and represent an important intersection of topical issues in condensed matter physics and systems biology.

Adaptation, Physiological↗
PubMed2005

Self-assembled shells composed of colloidal particles: fabrication and characterization.

We construct shells with tunable morphology and mechanical response with colloidal particles that self-assemble at the interface of emulsion droplets. Particles self-assemble to minimize the total interfacial energy, spontaneously forming a particle layer that encapsulates the droplets. We stabilize these layers to form solid shells at the droplet interface by aggregating the particles, connecting the particles with adsorbed polymer, or fusing the particles. These techniques reproducibly yield shells with controllable properties such as elastic moduli and breaking forces. To enable diffusive exchange through the particle shells, we transfer them into solvents that are miscible with the encapsulant. We characterize the mechanical properties of the shells by measuring the response to deformation by calibrated microcantilevers.

Colloids↗
PubMed2005

Effect of temperature on carbon-black agglomeration in hydrocarbon liquid with adsorbed dispersant.

Suspensions of carbon black in oil, stabilized with adsorbed polyisobutylene succinimide (PIBSI) dispersant, are commonly used as model systems for investigating the soot-handling characteristics of motor oils. The structure of the carbon-black agglomerates changes dramatically with temperature; this results in a concomitant change in the suspension rheology. Linear and nonlinear rheological experiments indicate a large increase of the interparticle attractions as the temperature is raised. To elucidate the origin of this behavior, we investigate the effect of temperature on the stabilizing effect of the dispersant. Measurements of adsorption isotherms of the dispersant on carbon black indicate that there is little variation of the binding energy with temperature. Intrinsic viscosity measurements of PIBSI dispersants in solution clearly exhibit an inverse dependence of the dispersant chain dimension with temperature. These results suggest that the temperature-dependent changes in the chain conformation of the PIBSI dispersant are primarily responsible for the changes in the dispersion rheology, and we propose a simple model to account for these data.

Journal Article↗
PubMed2004

Self-assembled polymer membrane capsules inflated by osmotic pressure.

We fabricate and characterize capsules that are composite membranes, made of a polymer network stabilized by adsorption to colloids and inflated by osmotic pressure from internal free polyelectrolyte; here, poly-l-lysine forms the network and inflates the capsules. To assess these capsules' properties and structure, we deform capsules using microcantilevers and use finite element modeling to describe these deformations. Additional experimental tests confirm the model's validity. These capsules' resilient response to mechanical forces indicates that loading and shear should be good triggers for the release of contents via deformation. The osmotic pressure inflating these capsules has the potential to trigger release of contents via deflation in response to changes in the capsules' environment; we demonstrate addition of salt as a trigger for deflating capsules. Because these capsules have a variety of release triggers available and the technique used to fabricate them is very flexible and allows high encapsulation efficiency, these capsules have very high potential for application in many areas.

Capsules↗
PubMed2004

Visualization of dislocation dynamics in colloidal crystals.

The dominant mechanism for creating large irreversible strain in atomic crystals is the motion of dislocations, a class of line defects in the crystalline lattice. Here we show that the motion of dislocations can also be observed in strained colloidal crystals, allowing detailed investigation of their topology and propagation. We describe a laser diffraction microscopy setup used to study the growth and structure of misfit dislocations in colloidal crystalline films. Complementary microscopic information at the single-particle level is obtained with a laser scanning confocal microscope. The combination of these two techniques enables us to study dislocations over a range of length scales, allowing us to determine important parameters of misfit dislocations such as critical film thickness, dislocation density, Burgers vector, and lattice resistance to dislocation motion. We identify the observed dislocations as Shockley partials that bound stacking faults of vanishing energy. Remarkably, we find that even on the scale of a few lattice vectors, the dislocation behavior is well described by the continuum approach commonly used to describe dislocations in atomic crystals.

Journal Article↗
PubMed2004

Rheology of binary colloidal structures assembled via specific biological cross-linking.

The selectivity and range of energies offered by specific biological interactions serve as valuable tools for engineering the assembly of colloidal particles into novel materials. In this investigation, high affinity biological interactions between biotin-coated "A" particles (RA = 0.475 microm) and streptavidin-coated "B" particles (RB = 2.75 microm) drive the self-assembly of a series of binary colloidal structures, from colloidal micelles (a large B particle coated by smaller A particles) to elongated chain microstructures (alternating A and B particles), as the relative number of small (A) to large (B) particles (2 < or = NA/NB < or = 200) is decreased at a low total volume fraction (10(-4) < or = phiT < or = 10(-3)). At a significantly higher total volume fraction (phiT > or = 10(-1)) and a low number ratio (NA/NB = 2), the rheological behavior of volume-filling particle networks connected by streptavidin-biotin bonds is characterized. The apparent viscosity (eta) as a function of the shear rate gamma, measured for networks at phiT = 0.1 and 0.2, exhibits shear-rate-dependent flow behavior, and both the apparent viscosity and the extent of shear thinning increase upon an increase of a factor of 2 in the total volume fraction. Micrographs taken before and after shearing show a structural breakdown of the flocculated binary particle network into smaller flocs, and ultimately a fluidlike suspension, with increasing shear rate. Rheological measurements provide further proof that suspension microstructure is governed by specific biomolecular interactions, as control experiments in which the streptavidin molecules on particles were blocked displayed Newtonian flow behavior. This investigation represents the first attempt at measuring the rheology of colloidal suspensions where assembly is driven by biomolecular cross-linking.

Biotin↗
PubMed2004

Shear-induced configurations of confined colloidal suspensions.

We show that geometric confinement dramatically affects the shear-induced configurations of dense monodisperse colloidal suspensions; a new structure emerges, where layers of particles buckle to stack in a more efficient packing. The volume fraction in the shear zone is controlled by a balance between the viscous stresses and the osmotic pressure of a contacting reservoir of unsheared particles. We present a model that accounts for our observations and helps elucidate the complex interplay between particle packing and shear stress for confined suspensions.

Journal Article↗