Search PubMed⌕ Search

Biomedical subjects

Dat T Tran

Publications and source records attributed to Dat T Tran.

5 recordsLinked to original sources
PubMed2006

Microfabrication using elastomeric stamp deformation.

Elastomeric stamp deformation has been utilized for the contact printing (CP) of self-assembled monolayers (SAMs) and, more recently, polymers and proteins. Here, we take advantage of this well-studied phenomenon to fabricate a series of new metal thin-film patterns not present on the original stamp. The rounded patterns are of nanoscale thickness, long-range order, and are created from elastomeric stamps with only straight-edged features. The metal was printed onto the surface of an alpha,omega-alkanedithiol self-assembled monolayer (SAM). The new shapes are controlled by a combination of stamp geometry design and the application of external pressure. Previously published rules on stamp deformation for contact printing of SAMs are invalid because the coating is instead a thin-metal film. This method represents a new pathway to micropatterning metal thin films, leading to shapes with higher complexity than the original lithographic masters.

Journal Article↗
PubMed2005

Open metal-organic framework containing cuprate chains.

A three-dimensional Cu(II) metal-organic framework, copper hydroxide p-pyridinecarboxylate hydrate, [Cu(OH)(C5H4NCO2).H2O], was synthesized by hydrothermally reacting copper nitrate with p-pyridinecarboxylic acid. The crystals were suitable for single-crystal X-ray diffraction analysis, which showed that the Cu(II) centers adopt a slightly distorted square pyramidal geometry. They coordinate to both the pyridyl and carboxylate functionalities of the pyridinecarboxylate bridging ligands. Infinite copper oxide chains run through the structure and are connected by p-pyridinecarboxylate (p-PyC) ligands. Crystal data: monoclinic, space group P2(1)/n, a = 3.5521(2) A, b = 15.8665(11) A, c = 12.9977(9) A, beta = 95.285(2) degrees , and Z = 4. Thermogravimetric analysis (TGA) revealed that the guest H2O molecules in the channels may be removed, and the material is stable to ca. 245 degrees C. Magnetic measurements indicated the material has one-dimensional (1D) antiferromagnetic ordering within the Cu2+ chains with a Néel temperature of ca. 51 K. Data fitting to the Bonner-Fisher model yielded a coupling constant, J, of -7.3 cm(-1) and g factor of 2.15. The Curie tail below 20 K is due to a small amount of paramagnetic impurities, calculated to be approximately 0.2% in concentration. Further characterization of crystallinity and morphology are discussed, including powder X-ray diffraction (PXRD), elemental analysis, and optical microscopy.

Journal Article↗
PubMed2003

Structural diversity and polytypism of lead phenylphosphonates: BING-6 and BING-9.

We report the solvothermal synthesis and characterization of a series of layered lead phenylphosphonates. The crystals were suitable for single crystal X-ray diffraction data, and the two new structures we denote BING-6 [SUNY at Binghamton, Structure No. 6, Pb(PO(3)C(6)H(5)).0.25C(5)H(5)N, triclinic space group Ponemacr;, Z = 2, a = 7.0770(4) A, b = 9.3113(6) A, c = 14.6785(9) A, alpha = 80.456(1) degrees, beta = 78.023(1) degrees, gamma = 73.265(1)(o)] and BING-9 [Pb(PO(3)HC(6)H(5))(PO(3)HC(6)H(4)CH(3)), monoclinic space group C2/c, Z = 4, a = 32.663(8) A, b = 5.6220(13) A, c = 8.3307(19) A, beta = 101.419(4)(o)]. The third structure, a polytype of BING-9, was previously known only from powder X-ray diffraction methods and is denoted 3 [Pb(PO(3)HC(6)H(5))(2), monoclinic space group C2/c, Z = 4, a = 31.681(6) A, b = 5.5639(11) A, c = 8.2515(16) A, beta = 101.814(4)(o)]. All three structures possess Pb(II) and P centers connected by doubly and triply bridging oxygens. The phenyl groups cap and separate the charge-neutral layers. The phosphonates of BING-6 are nonprotonated, and the structure therefore has a Pb/P ratio of 1:1. Neutral, partially disordered pyridine solvent molecules also reside in the interlamellar space, increasing the layer to layer distance. BING-9 and 3 are polytypes and contain singly protonated phosphonates, for a Pb/P ratio of 1:2. Further characterization methods are discussed, including powder X-ray diffraction, in-situ variable temperature powder X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. Related work in the Ge, Sn, and Mn systems is also discussed. These low-dimensional materials may be useful intercalation compounds for ion-exchange or sensor applications.

Journal Article↗
PubMed2002

Pb(3)F(5)NO(3), a cationic layered material for anion-exchange.

Our research involves the development of new cationic materials for anion-based applications. We report the solvothermal synthesis and characterization of Pb(3)F(5)NO(3), a new layered lead fluoride material that, unlike the majority of layered and open-framework materials, is cationic in charge. The structure consists of polyhedral lead centers connected by doubly and triply bridging fluoride groups. We quantitatively exchanged the interlamellar nitrate groups of Pb(3)F(5)NO(3) for dichromate, under ambient aqueous conditions. Nuclear magnetic resonance and UV-vis spectroscopy show the reaction proceeds to 61.0% completion in several days. The material is also stable to 450 degrees C, which is vastly superior to organic resins that are still the standard for anion-exchange. The presence of extraframework anions also opens up other potentially unique anion-based properties, such as new catalytic reactions, anion intercalation, or growth of anionic clusters within the void spaces of the cationic material.

Journal Article↗