Search PubMed⌕ Search

Biomedical subjects

Darryl W Hawker

Publications and source records attributed to Darryl W Hawker.

9 recordsLinked to original sources
PubMed2006

Evaluation of performance reference compounds in polyethylene-based passive air samplers.

Polyethylene-based passive air samplers (PSDs) were loaded with performance reference compounds (PRCs) and deployed in a wind tunnel to examine the effects of wind speed on sampler performance. PRCs could be loaded reproducibly into PSDs, with coefficients of variation only exceeding 20% for the more volatile compounds. When PSDs were exposed to low (0.5-1.5 m s-1) and high (3.5-4.5 m s-1) wind speeds, PRC loss rate constants generally increased with increasing wind speed and decreased with increasing sampler/air partition coefficients. PSD-based air concentrations calculated using PRC loss rate constants and sampler/air partition coefficients and air concentrations measured using active samplers compared closely. PRCs can be used to account for the effect of differences in wind speeds on sampler performance and measure air concentrations with reasonable accuracy.

Air Pollutants↗
PubMed2005

Tributyltin partitioning in sediments: effect of aging.

The effect of aging on the solid/pore-water partitioning and desorption behaviour of tributyltin (TBT) in sediments was examined. Three sediment samples with contrasting physical and chemical properties were spiked with 10 mg/kg TBT and aged under sterile conditions for periods of time ranging from 1 to 84 days. Aging had a negligible effect on partitioning and desorption behaviour in a sandy sample with very low organic carbon content (0.2% w/w). In contrast, for samples with larger amounts of organic carbon (2.6% and 4.8% w/w), aging caused substantial increases in TBT sorption. For these samples, apparent distribution coefficients (KD,app) obtained from sequential 2 h desorption experiments also exhibited a twofold increase between spiked sediments subjected to aging for 1 day and 84 days. This study demonstrates that aging effects may be an important aspect of TBT fate in contaminated sediments.

Adsorption↗
PubMed2005

Trace metal distribution and enrichment in benthic, estuarine sediments: Southport Broadwater, Australia.

The distribution and enrichment of selected trace metals (Cd, Cr, Cu, Ni, Pb, Sn, Zn) in benthic sediments of the Southport Broadwater, a semi-enclosed coastal body of water adjacent to the Gold Coast city, south-eastern Queensland, Australia, was studied with the objective of assessing the extent and degree of sediment contamination. Sediment samples from the 0-10 cm and 10-20 cm depth intervals of 32 sites within the Southport Broadwater and surrounding residential canals were analysed for particle size distribution, pH, organic C and 'near-total' major (Al, Ca, Fe, Mn) and trace (Cd, Cr, Cu, Ni, Pb, Sn, Zn) metal contents. Sediment contamination for each trace metal was assessed by (1) comparison with Australian sediment quality guidelines, (2) calculation of the index of geoaccumulation based on regional background values, and (3) geochemical normalisation against Al (i.e. the abundance of alumino-silicate clay minerals). Based on this approach, the results indicate that submerged sediments in the study area are not presently enriched with Cd, Cr or Ni, with the spatial distribution of these metals being very well explained by the abundance of alumino-silicate clay minerals. However, several sites were strongly enriched with Cu, Pb, Sn and Zn, arising from sources related to either urban runoff or vessel maintenance activities. The study indicates that several varying approaches are needed for a satisfactory assessment of contaminant enrichment in estuarine sediments.

Aluminum Silicates↗
PubMed2005

Passive air sampling theory for semivolatile organic compounds.

The mathematical modelling underlying passive air sampling theory can be based on mass transfer coefficients or rate constants. Generally, these models have not been inter-related. Starting with basic models, the exchange of chemicals between the gaseous phase and the sampler is developed using mass transfer coefficients and rate constants. Importantly, the inter-relationships between the approaches are demonstrated by relating uptake rate constants and loss rate constants to mass transfer coefficients when either sampler-side or air-side resistance is dominating chemical exchange. The influence of sampler area and sampler volume on chemical exchange is discussed in general terms and as they relate to frequently used parameters such as sampling rates and time to equilibrium. Where air-side or sampler-side resistance dominates, an increase in the surface area of the sampler will increase sampling rates. Sampling rates are not related to the sampler/air partition coefficient (K(SV)) when air-side resistance dominates and increase with K(SV) when sampler-side resistance dominates.

Air Pollutants↗
PubMed2004

Sorption and desorption behavior of tributyltin with natural sediments.

Tributyltin (TBT) sorption to four natural sediment samples in artificial seawater was examined under a range of modified pH and salinity conditions. Three of the sediment samples were relatively pristine with regard to TBT contamination, but the fourth was a TBT-contaminated sediment from a commercial marina. Sorption of TBT was described well by linear sorption isotherms, with distribution coefficients ranging from 6.1 to 5210 L/kg depending on the pH and salinity. The sediment organic C content and particle size distribution were important determinants of sorption behavior. The presence of resident TBT in the contaminated marina sediment caused a substantial reduction in further TBT sorption. Desorption of TBT from the marina sediment was described by relatively large observed distribution coefficients ranging from 5100 to 9400 L/kg, suggesting that aging effects may reduce sorption reversibility. Increased artificial seawater salinity generally reduced TBT sorption at pH 4 and 6, but enhanced TBT sorption at pH 8. Regardless of salinity, maximum sorption of TBT was observed at pH 6, which is attributed to an optimal balance between the abundance of cationic TBT+ species and deprotonated surface ligands. Consideration of aqueous TBT speciation along with octanol-water partitioning behavior suggests that hydrophobic partitioning of TBTCl(0) to nonpolar organic matter was important for pH < 6, while partitioning of TBTOH(0) was important at higher pH.

Adsorption↗
PubMed2004

In-situ partitioning of butyltin compounds in estuarine sediments.

The in-situ solid/pore-water partitioning of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) was determined for an estuarine sediment profile collected from a commercial marina. Total butyltin levels exceeded sediment quality guideline values, and were 220-8750 microg/kg for TBT, 150-5450 microg/kg for DBT and 130-4250 microg/kg for MBT. Pore-water butyltin concentrations ranged from 0.05 to 2.35 microg/l for TBT, 0.07-3.25 microg/l for DBT, and 0.05-0.53 microg/l for MBT. The partitioning of butyltin compounds between the sediment solid-phase and pore-water was described by an organic carbon normalised distribution ratio (D(OC)). The observed D(OC) values were similar for TBT, DBT and MBT, and were 10(5)-10(6) l/kg. Values for the Butyltin Degradation Index (BDI) were larger than 1 at depths greater than 10 cm below the sediment/water-column interface. This indicates that substantial TBT degradation has occurred in the sediments, and suggests that natural attenuation may be a viable sediment remediation strategy.

Carbon↗
PubMed2004

Characterizing uptake kinetics of PAHs from the air using polyethylene-based passive air samplers of multiple surface area-to-volume ratios.

Polyethylene passive sampling devices (PSDs) were deployed to investigate how passive samplers of multiple surface area-to-volume ratios could be used to characterize uptake kinetics for polyaromatic hydrocarbons (PAHs). Theoretically, uptake profiles for different thickness PSDs of the same surface area should show the following: where uptake is linear, the amount of compound accumulated in the different PSDs will be the same and where equilibrium is approached, the amount accumulated by the different PSDs will be proportional to sampler thickness. Polyethylene sheets of the same surface area and approximately 100 and 200 microm thickness were collected after 30, 60, and 90 days of exposure along with samples from a codeployed high volume sampler. Twelve priority pollutant PAHs could be routinely quantified in replicate PSDs. Overall, reproducibility between replicate PSDs was satisfactory, with normalized differences rarely exceeding 25%. The smallest analytes quantified, fluorene, phenanthrene, and anthracene, were shown to approach equilibrium during the deployment period, whereas uptake for fluoranthene and pyrene moved into the curvilinear stage. For most of the larger molecular weight PAHs such as indeno[1,2,3-cd]pyrene, uptake could be described using a linear uptake model. Preliminary sampling rates for the compounds which remained in the linear stage of uptake ranged between 0.5 and 1.5 m3 d(-1) dm(-2). Sampler to air partition coefficients were estimated for PAHs which approached equilibrium and predicted for some of the other compounds. Results suggest that a single deployment of PSDs with multiple surface area-to-volume ratios can be sufficient to determine whether uptake was linear or approaching equilibrium for a range of PAHs.

Air Pollutants↗
PubMedDate not supplied

Geochemical partitioning of copper, lead, and zinc in benthic, estuarine sediment profiles.

The geochemical partitioning of copper (Cu), lead (Pb), and zinc (Zn) was examined in benthic sediment profiles (0- to 20-cm depth interval) composed of relatively coarse (65-90% sand-sized particles), noncohesive, suboxic material (Eh +120 to +260 mV). Total Cu, Pb, and Zn concentrations ranged from 8.3 to 194, 16.3 to 74.8, and 30.1 to 220 mg/kg, respectively, and were related to vertical trends in sediment texture. The observed distribution coefficients describing solid-solution partitioning were in the range of 100 to 1000 L/kg. The geochemical partitioning of solid-phase Cu, Pb, and Zn between six operationally defined fractions was examined with a sequential extraction scheme. The association of Cu, Pb, and Zn with amorphous oxides, crystalline oxides, and organic matter was linearly dependent on the abundance of each respective phase. For retention by amorphous oxide minerals, the observed stoichiometry ranged from 5.2 to 23.7 mg/g for Cu, 12.8 to 21.5 mg/g for Pb, and 23.1 to 85.7 mg/g for Zn. Corresponding values for association with crystalline oxides were an order of magnitude less than those for amorphous oxides, indicating a lesser affinity of trace metals for crystalline oxides. The stoichiometric relationships describing association with organic matter ranged from 17.6 to 54.0 mg/g for Cu, 6.1 to 9.6 mg/g for Pb, and 6.4 to 16.4 mg/g for Zn. The results from this study provide an insight into processes controlling trace metal partitioning in coarse-textured, suboxic, estuarine sediments.

Copper↗