Search PubMed⌕ Search

Biomedical subjects

D M Lilley

Publications and source records attributed to D M Lilley.

At least 37 records · Page 2Linked to original sources
PubMed2000

Roles of topoisomerases in maintaining steady-state DNA supercoiling in Escherichia coli.

DNA supercoiling is essential for bacterial cell survival. We demonstrated that DNA topoisomerase IV, acting in concert with topoisomerase I and gyrase, makes an important contribution to the steady-state level of supercoiling in Escherichia coli. Following inhibition of gyrase, topoisomerase IV alone relaxed plasmid DNA to a final supercoiling density (sigma) of -0.015 at an initial rate of 0.8 links min(-1). Topoisomerase I relaxed DNA at a faster rate, 5 links min(-1), but only to a sigma of -0.05. Inhibition of topoisomerase IV in wild-type cells increased supercoiling to approximately the same level as in a mutant lacking topoisomerase I activity (to sigma = -0.08). The role of topoisomerase IV was revealed by two functional assays. Removal of both topoisomerase I and topoisomerase IV caused the DNA to become hyper-negatively supercoiled (sigma = -0.09), greatly stimulating transcription from the supercoiling sensitive leu-500 promoter and increasing the number of supercoils trapped by lambda integrase site-specific recombination.

DNA Topoisomerase IV↗
PubMed2000

Extensive central disruption of a four-way junction on binding CCE1 resolving enzyme.

Junction-resolving enzymes are nucleases that are selective for the structure of the four-way DNA junction that is important in genetic recombination. They exhibit selectivity for the structure of the junction, but they also manipulate the structure. Local disruption of DNA structure around the centre of the junction by CCE1 of Saccharomyces cerevisiae has been investigated using 2-aminopurine fluorescence. On binding CCE1, 2-aminopurine bases located at the point of strand exchange exhibit a large increase in fluorescence intensity (up to 39-fold enhancement), consistent with complete unstacking. This was observed for all positions around the centre of the junction, both 5' and 3' to the point of strand exchange. Thymine bases complementary to the modified adenine bases adjacent to the junction centre were strongly reactive to potassium permanganate. The results indicate that binding of CCE1 results in a complete unpairing of the four central base-pairs of the junction, with a lesser disruption of the next base-pairs.

2-Aminopurine↗
PubMed2000

Fluorescence resonance energy transfer as a structural tool for nucleic acids.

Fluorescence resonance energy transfer is a spectroscopic method that provides distance information on macromolecules in solution in the range 20-80 A. It is particularly suited to the analysis of the global structure of nucleic acids because the long-range distance information provides constraints when modelling these important structures. The application of fluorescence resonance energy transfer to nucleic acid structure has seen a resurgence of interest in the past decade, which continues to increase. An especially exciting development is the recent extension to single-molecule studies.

Nucleic Acid Conformation↗
PubMed2000

Structures of helical junctions in nucleic acids.

Our knowledge of the architectural principles of nucleic acid junctions has seen significant recent advances. The conformation of DNA junctions is now well understood, and this provides a new basis for the analysis of important structural elements in RNA. The most significant new data have come from X-ray crystallography of four-way DNA junctions; incidentally showing the great importance of serendipity in science, since none of the three groups had deliberately set out to crystallise a junction. Fortunately the results confirm, and of course extend, the earlier conformational studies of DNA junctions in almost every detail. This is important, because it means that these methods can be applied with greater confidence to new systems, especially in RNA. Methods like FRET, chemical probing and even the humble polyacrylamide gel can be rapid and very powerful, allowing the examination of a large number of sequence variants relatively quickly. Molecular modelling in conjunction with experiments is also a very important component of the general approach. Ultimately crystallography provides the gold standard for structural analysis, but the other, simple approaches have considerable value along the way. At the beginning of this review I suggested two simple folding principles for branched nucleic acids, and it is instructive to review these in the light of recent data. In brief, these were the tendency for pairwise coaxial stacking of helical arms, and the importance of metal ion interactions in the induction of folding. We see that both are important in a wide range of systems, both in DNA and RNA. The premier example is the four-way DNA junction, which undergoes metal ion-induced folding into the stacked X-structure that is based on coaxial stacking of arms. As in many systems, there are two alternative ways to achieve this depending on the choice of stacking partners. Recent data reveal that both forms often exist in a dynamic equilibrium, and that the relative stability of the two conformers depends upon base sequence extending a significant distance from the junction. The three-way junction has provided a good test of the folding principles. Perfect three-way (3H) DNA junctions seem to defy these principles in that they appear reluctant to undergo coaxial stacking of arms, and exhibit little change in conformation with addition of metal ions. Modelling suggests that such a junction is stereochemically constrained in an extended conformation. However, upon inclusion of a few additional base pairs at the centre (to create a 3HS2 junction for example) the additional stereochemical flexibility allows two arms to undergo coaxial stacking. Such a junction exhibits all the properties consistent with the general folding principles, with ion-induced folding into a form based on pairwise coaxial stacking of arms in one of two different conformers. The three-way junction is therefore very much the exception that proves the rule. It is instructive to compare the folding of corresponding species in DNA and RNA, where we find both similarities and differences. The RNA four-way junction can adopt a structure that is globally similar to the stacked X-structure (Duckett et al. 1995a), and the crystal structure of the DNAzyme shows that the stacked X-conformation can include one helical pair in the A-conformation (Nowakowski et al. 1999). However, modelling suggests that the juxtaposition of strands and grooves will be less satisfactory in RNA, and the higher magnesium ion concentration required to fold the RNA junction indicates a lower stability of the antiparallel form. Perhaps the biggest difference between the properties of the DNA and RNA four-way junctions is the lack of an unstacked structure at low salt concentrations for the RNA species. This clearly reflects a major difference in the electrostatic interactions in the RNA junction. In general the folding of branched DNA provides some good indications on the likely folding of the corresponding RNA species, but caution is required in making the extrapolation because the two polymers are significantly different. A number of studies point to the flexibility and malleability of branched nucleic acids, and this turns out to have particular significance in their interactions with proteins. Proteins such as the DNA junction-resolving enzymes exhibit considerable selectivity for the structure of their substrates, which is still not understood at a molecular level. Despite this, it appears to be universally true that these proteins distort the global, and in some cases at least the local, structure of the junctions. The somewhat perplexing result is that the proteins appear to distort the very property that they recognise. In general it seems that four-way DNA junctions are opened to one extent or another by interaction with proteins. (ABSTRACT TRUNCATED)

Animals↗
PubMed2000

The folding of the hairpin ribozyme: dependence on the loops and the junction.

In its natural context, the hairpin ribozyme is constructed around a four-way helical junction. This presents the two loops that interact to form the active site on adjacent arms, requiring rotation into an antiparallel structure to bring them into proximity. In the present study we have compared the folding of this form of the ribozyme and subspecies lacking either the loops or the helical junction using fluorescence resonance energy transfer. The complete ribozyme as a four-way junction folds into an antiparallel structure by the cooperative binding of magnesium ions, requiring 20-40 microM for half-maximal extent of folding ([Mg2+]1/2) and a Hill coefficient n = 2. The isolated junction (lacking the loops) also folds into a corresponding antiparallel structure, but does so noncooperatively (n = 1) at a higher magnesium ion concentration ([Mg2+]1/2 = 3 mM). Introduction of a G + 1A mutation into loop A of the ribozyme results in a species with very similar folding to the simple junction, and complete loss of ribozyme activity. Removal of the junction from the ribozyme, replacing it either with a strand break (serving as a hinge) or a GC5 bulge, results in greatly impaired folding, with [Mg2+]1/2 > 20 mM. The results indicate that the natural form of the ribozyme undergoes ion-induced folding by the cooperative formation of an antiparallel junction and loop-loop interaction to generate the active form of the ribozyme. The four-way junction thus provides a scaffold in the natural RNA that facilitates the folding of the ribozyme into the active form.

Base Sequence↗
PubMed1999

Sequence and functional-group specificity for cleavage of DNA junctions by RuvC of Escherichia coli.

RuvC is the DNA junction-resolving enzyme of Escherichia coli. While the enzyme binds to DNA junctions independently of base sequence, it exhibits considerable sequence selectivity for the phosphodiester cleavage reaction. We have analyzed the sequence specificity using a panel of DNA junctions, measuring the rate of cleavage of each under single-turnover conditions. We have found that the optimal sequence for cleavage can be described by (A approximately T)TT downward arrow(C>G approximately A), where downward arrow denotes the position of backbone scission. Cleavage is fastest when the cleaved phosphodiester linkage is located at the point of strand exchange. However, cleavage is possible one nucleotide 3' of this position when directed by the sequence, with a rate that is 1 order of magnitude slower than the optimal. The maximum sequence discrimination occurs at the central TT in the tetranucleotide site, where any alteration of sequence results in a rate reduction of at least 100-fold and cleavage is undetectable for some changes. However, certain sequences in the outer nucleotides are strongly inhibitory to cleavage. Introduction of base analogues around the cleavage site reveals a number of important functional groups and suggests that major-groove contacts in the center of the tetranucleotide are important for the cleavage process. Since RuvC binds to all the variant junctions with very similar affinity, any contacts affecting the rate of cleavage must be primarily important in the transition state. Introduction of the optimal cleavage sequence into a three-way DNA junction led to relatively efficient cleavage by RuvC, at a rate only 3-fold slower than the optimal four-way junction. This is consistent with a protein-induced alteration in the conformation of the DNA.

Bacterial Proteins↗
PubMed1999

Folding and catalysis by the hairpin ribozyme.

The hairpin ribozyme undergoes a site-specific transesterification cleavage of the phosphodiester backbone. The natural form of the ribozyme is a four-way helical junction, where two arms contain unpaired loops. This folds by pairwise coaxial stacking of helical arms, and a rotation into an antiparallel conformation in which there is close association between the loops. This probably generates the local conformation required to facilitate the trajectory into an in-line SN2 transition state. Folding is induced by the cooperative binding of at least two divalent metal ions, which are probably distributed between the junction and the loop-loop interface. The junction forms the structural scaffold on which the geometry of the ribozyme is built, and structural perturbation of the junction leads to impaired catalytic activity.

Base Sequence↗
PubMed1999

Binding of U1A protein to the 3' untranslated region of its pre-mRNA.

We have studied the global structure of the U1A 3' untranslated region (UTR) element using fluorescence resonance energy transfer. Comparison of a single UTR-box with a series of oligoadenine bulges indicates that the UTR-box introduces a significant kink into the axis of the RNA, and quantification of the results suggests an included bend angle of approximately 100 degrees (i.e. 80 degrees from linear). The complete 3'-UTR element is also severely kinked by the two UTR-boxes. We can observe binding of U1A protein to the 3'-UTR element by a change in the fluorescence anisotropy of Cy3 attached to one of the helical ends. In parallel with the binding, we observe a marked increase in fluoresence resonance energy transfer efficiency between fluorophores attached at the two 5' termini, indicating a significant change in global conformation induced by the binding of the protein.

3' Untranslated Regions↗
PubMed1999

RNA folding and misfolding of the hammerhead ribozyme.

The hammerhead ribozyme undergoes a well-defined two-stage folding process induced by the sequential binding of two magnesium ions. These probably correspond to the formation of domain 2 (0-500 microM magnesium ions) and domain 1 (1-20 mM magnesium ions), respectively. In this study we have used fluorescence resonance energy transfer (FRET) to analyze the ion-induced folding of a number of variants of the hammerhead ribozyme. We find that both A14G and G8U mutations are highly destabilizing, such that these species are essentially unfolded under all conditions. Thus they appear to be blocked in the first stage of the folding process, and using uranyl-induced photocleavage we show that the core is completely accessible to this probe under these conditions. Changes at G5 do not affect the first transition but appear to provide a blockage at the second stage of folding; this is true of changes in the sugar (removal of the 2'-hydroxyl group) and base (G5C mutation, previously studied by comparative gel electrophoresis). Arrest of folding at this intermediate stage leads to a pattern of uranyl-induced photocleavage that is changed from the wild-type, but suggests a structure less open than the A14G mutant. Specific photocleavage at G5 is found only in the wild-type sequence, suggesting that this ion-binding site is formed late in the folding process. In addition to folding that is blocked at selected stages, we have also observed misfolding. Thus the A13G mutation appears to result in the ion-induced formation of a novel tertiary structure.

Adenine↗
PubMed1999

Transcription-induced hypersupercoiling of plasmid DNA.

Transcription can induce high levels of negative supercoiling into plasmid DNA under some circumstances. This is especially true when the plasmid carries a functional tetracycline-resistance gene tetA, and is borne in a topA strain of Escherichia coli or Salmonella typhimurium. An important mechanism in transcription-induced supercoiling is believed to be the twin supercoiled-domain effect resulting from hindered rotation of the transcriptional complex, and this is very much more efficient where there is coupled transcription, translation and membrane insertion of the gene product. However, we have noted that strong promoters inserted into tetA-carrying plasmids can greatly increase the fraction of hypersupercoiled DNA. We show here that this effect is clearly present when the inserted promoter transcribes a very short segment of DNA (down to transcript lengths of approximately 45 nt), and where there is no possibility of translation of the RNA transcript. We suggest that the repeated helical opening due to transcriptional initiation is a significant contributor to the induction of high levels of supercoiling.

Base Sequence↗
PubMed1999

Catalytic and binding mutants of the junction-resolving enzyme endonuclease I of bacteriophage t7: role of acidic residues.

Endonuclease I is a 149 amino acid protein of bacteriophage T7 that is a Holliday junction-resolving enzyme, i.e. a four-way junction-selective nuclease. We have performed a systematic mutagenesis study of this protein, whereby all acidic amino acids have been individually replaced by other residues, mainly alanine. Out of 21 acidic residues, five (Glu20, Glu35, Glu65, Asp55 and Asp74) are essential. Replacement of these residues by other amino acids leads to a protein that is inactive in the cleavage of DNA junctions, but which nevertheless binds selectively to DNA junctions. The remaining 16 acidic residues can be replaced without loss of activity. The five critical amino acids are located within one section of the primary sequence. It is rather likely that their function is to bind one or more metal ions that coordinate the water molecule that brings about hydrolysis of the phosphodiester bond. We have also constructed a mutant of endonuclease I that lacks nine amino acids (six of which are arginine or lysine) at the C-terminus. Unlike the acidic point mutants, the C-terminal truncation is unable to bind to DNA junctions. It is therefore likely that the basic C-terminus is an important element in binding to the DNA junction.

Alanine↗
PubMed1999

Structure, folding and catalysis of the small nucleolytic ribozymes.

The small nucleolytic ribozymes are largely (but not exclusively) found in the RNA of plant pathogens and are involved in the self-catalysed processing of the concatameric RNA resulting from rolling circle replication. They catalyse a site-specific transesterification reaction in which their 2' hydroxyl attacks the 3' phosphate, with the exclusion of the 5' oxyanion. This requires an in-line geometry, which is not present in normal RNA structure. A significant part of the activation is probably provided by a distortion of the local conformation in order to facilitate the trajectory into the transition state and, thus, RNA folding and catalysis are intimately connected. A second element of the catalysis is provided by bound metal ions; however, a number of recent experiments cast doubt on the direct role of metal ions in the catalytic chemistry.

Catalysis↗
PubMed1999

The influence of junction conformation on RNA cleavage by the hairpin ribozyme in its natural junction form.

In the natural form of the hairpin ribozyme the two loop-carrying duplexes that comprise the majority of essential bases for activity form two adjacent helical arms of a four-way RNA junction. In the present work we have manipulated the sequence around the junction in a way known to perturb the global folding properties. We find that replacement of the junction by a different sequence that has the same conformational properties as the natural sequence gives closely similar reaction rate and Arrhenius activation energy for the substrate cleavage reaction. By comparison, rotation of the natural sequence in order to alter the three-dimensional folding of the ribozyme leads to a tenfold reduction in the kinetics of cleavage. Replacement with the U1 four-way junction that is resistant to rotation into the antiparallel structure required to allow interaction between the loops also gives a tenfold reduction in cleavage rate. The results indicate that the conformation of the junction has a major influence on the catalytic activity of the ribozyme. The results are all consistent with a role for the junction in the provision of a framework by which the loops are presented for interaction in order to create the active form of the ribozyme.

Base Sequence↗
PubMed1999

RNA folding and catalysis.

Catalysis in RNA is intimately connected to the folding. The small nucleolytic ribozymes function by a nucleophilic attack of the 2'-oxygen on the 3'-phosphate, in an SN2 mechanism. This requires an alignment of the 2'-O, 3'-P and 5'-O, that does not occur in normal A-form RNA. It is therefore likely that structural distortion plays a major role in the enhancement of the reaction rate, facilitating the trajectory into the in-line transition state. Given the polyelectrolyte nature of nucleic acids, metal ions are critical to folding processes in RNA. We have shown that two small nucleolytic ribozymes, the hammerhead and hairpin ribozymes, undergo metal ion-induced folding processes. The hammerhead ribozyme folds in two stages, each of which is induced by the binding of a single structural ion. The first corresponds to the formation of the ribozyme scaffold, while the second is the formation of the catalytic core of the ribozyme. By contrast, the hairpin ribozyme undergoes a single folding event induced by the binding of at least two metal ions, and involves the close interaction between two internal loops to form the active ribozyme.

Catalysis↗
PubMed1998

Folding of the four-way RNA junction of the hairpin ribozyme.

The hairpin ribozyme consists of two loop-carrying duplexes (called A and B) that are adjacent arms of a four-way junction in its natural context in the viral RNA. We have shown previously that the activity of the ribozyme is strongly influenced by the structure adopted by the junction. In this study, we have used fluorescence resonance energy transfer to analyze the conformation and folding of the isolated four-way junction. Like other four-way RNA junctions, in the absence of added metal ions this junction adopts a square configuration of coaxially stacked arms, based on A on D and B on C stacking. Upon addition of magnesium ions, the junction undergoes an ion-induced transition to an antiparallel conformation. The data are consistent with folding induced by the binding of a single ion, with an apparent association constant in the range of 2000 M-1. Other divalent metal ions (calcium or manganese) can also induce this change in structure; however, sodium ions are unable to substitute for these ions, and are slightly inhibitory with respect to the transition. The loop-free hairpin junction adopts the same stacking conformer as the full ribozyme, but forms a more symmetrical X-shaped structure. In addition, the apparent stoichiometry of structural ion binding is lower for the isolated junction, and the affinity is considerably lower.

Calcium↗
PubMed1998

Interaction of the resolving enzyme YDC2 with the four-way DNA junction.

Holliday junctions (four-way DNA junctions), formed during homologous recombination, are bound and resolved by junction-specific endonucleases to yield recombinant duplex DNA products. The junction-resolving enzymes are a structurally diverse class of proteins that nevertheless have many properties in common; in particular a high structure specificity for binding and metal-dependent, (frequently) sequence-specific cleavage activity. In Saccharomyces cerevisiae, the enzyme CCE1 is necessary for the resolution of recombining mitochondrial genomes, and in Schizosaccharomyces pombe the homologous protein YDC2 is thought to have a similar function. We have generated an inactive mutant of YDC2, D226N, that retains structure-specific junction binding and have analysed the interaction of this protein with the four-way DNA junction. YDC2 binds the four-way junction in two specific complexes (I and II), unfolding the stacked X-structure into a conformation where the arms extend to the four corners of a square. This structure is reminiscent of that of the free junction in the absence of metal ions and of the structures imposed on the Holliday junction by CCE1 and RuvA. DNase I probing reveals footprints specific for complexes I and II which extend from the junction centre on all four arms. No protection is observed with the small, hydrophobic probe DMS.

Binding Sites↗