Search PubMed⌕ Search

Biomedical subjects

D Leckband

Publications and source records attributed to D Leckband.

At least 19 recordsLinked to original sources

End-grafted low-molecular-weight PNIPAM does not collapse above the LCST.

The interfacial properties of end-grafted temperature-responsive poly(N-isopropylacryamide) (PNIPAM) were quantified by direct force measurements both above and below the lower critical solution temperature (LCST) of 32 degrees C. The forces were measured between identical, opposing PNIPAM films and between a PNIPAM film and a lipid membrane. At the grafting densities and molecular weights investigated, the polymer extension did not change significantly above the LCST, and the polymers did not adhere. Below the LCST, the force-distance profiles suggest a vertical phase separation, which results in a diluter outer layer and a dense surface proximal layer. At large separations, the force profiles agree qualitatively with simple polymer theory but deviate at small separations. Importantly, at these low grafting densities and molecular weights, the end-grafted PNIPAM does not collapse above the LCST. This finding has direct implications for triggering liposomal drug release with end-grafted PNIPAM, but it increases the temperature range where these short PNIPAM chains function as steric stabilizers.

Acrylic Resins↗

pH-dependent mucoadhesion of a poly(N-isopropylacrylamide) copolymer reveals design rules for drug delivery.

This study investigated the mucoadhesive property of a hydrophobically modified copolymer N-isopropylacryamide and glycidylacrylamide NIPAM-N-Gly-(C18)2 (NIPAM-Gly). Prior studies demonstrated that the interfacial properties of this copolymer are pH dependent and that the chains form strong hydrogen bonds at pH < 7 via the carboxylic acid side chains of the glycine moieties. Mucin interactions with the copolymer brushes were investigated by surface plasmon resonance and by direct force measurements. Mucin adsorption was determined as a function of pH, ionic strength, and mucin concentration. It adsorbs to the copolymer strongly at pH 5, but the adsorption decreases with increasing pH. The adsorbed amount is also ionic-strength dependent, decreasing with increasing monovalent salt concentrations at all pH values investigated. When compared with similar investigations with poly(ethylene oxide), these results provide insights into both the chemical characteristics and the solution conditions that determine the mucoadhesive properties of polymers.

Acrylic Resins↗

Mechanism of homophilic adhesion by the neural cell adhesion molecule: use of multiple domains and flexibility.

The extracellular regions of adhesion proteins of the Ig superfamily comprise multiple, tandemly arranged domains. We used directforce measurements to investigate how this modular architecture contributes to the adhesive interactions of the neural cell adhesion molecule (NCAM), a representative of this protein class. The extracellular region of NCAM comprises five immunoglobulin and two fibronectin domains. Previous investigations generated different models for the mechanism of homophilic adhesion that each use different domains. We use force measurements to demonstrate that NCAM binds in two spatially distinct configurations. Igdomain deletion mutants identified the domains responsible for each of the adhesive bonds. The measurements also confirmed the existence of a flexible hinge that alters the orientation of the adhesive complexes and the intermembrane distance. These results suggest that a combination of multiple bound states and internal molecular flexibility allows for sequentially synergistic bond formation and the ability to accommodate differences in intercellular space.

Animals↗

Tuning the interfacial properties of grafted chains with a pH switch.

Environmentally responsive, water-soluble polymers have a wide variety of uses ranging from drug delivery to viscosity modifiers. Their utility lies in the ability to use environmental perturbations to dramatically alter the material properties. Here, we describe the interfacial properties of a hydrophobically modified copolymer of N-isopropylacrylamide and glycinylacrylamide (NIPAM-N-Gly-(C18)2), which is both temperature and pH responsive. Direct force measurements quantified the substantial pH-dependent change in the molecular properties of end-grafted NIPAM-N-Gly-(C18)2 monolayers. At pH 8.0, where the glycine side chains are ionized, the polymers exhibit stereotypical polyelectrolyte behavior. Side chain neutralization at pH 5.0 causes a substantial decrease in the film thickness, and the polymer films adhere strongly. The adhesion is presumably through H-bonding between the glycine side chains. Our findings revealed the likely molecular basis of pH-dependent changes in the copolymer films and identified clear design criteria for tuning the interfacial properties of these polymer films.

Journal Article↗

Forced dissociation of the strand dimer interface between C-cadherin ectodomains.

The force-induced dissociation of the strand dimer interface in C-cadherin has been studied using steered molecular dynamics simulations. The dissociation occurred, without domain unraveling, after the extraction of the conserved trypthophans (Trp2) from their respective hydrophobic pockets. The simulations revealed two stable positions for the Trp2 side chain inside the pocket. The most internal stable position involved a hydrogen bond between the ring Nepsilon of Trp2 and the backbone carbonyl of Glu90. In the second stable position, the aromatic ring is located at the pocket entrance. After extracting the two tryptophans from their pockets, the complex exists in an intermediate bound state that involves a close packing of the tryptophans with residues Asp1 and Asp27 from both domains. Dissociation occurred after this residue association was broken. Simulations carried out with a complex formed between W2A mutants showed that the mutant complex dissociates more easily than the wild type complex does. These results correlate closely with the role of the conserved tryptophans suggested previously by site directed mutagenesis.

Amino Acids↗

Forced detachment of the CD2-CD58 complex.

The force-induced detachment of the adhesion protein complex CD2-CD58 was studied by steered molecular dynamics simulations. The forced detachment of CD2 and CD58 shows that the system can respond to an external force by two mechanisms, which depend on the loading rate. At the rapid loading rates of 70 and 35 pN/ps (pulling speeds of 1 and 0.5 A/ps) the two proteins unfold before they separate, whereas at slower loading rates of 7 and 3.5 pN/ps (pulling speeds of 0.1 and 0.05 A/ps), the proteins separate before the domains can unfold. When subjected to a constant force of 400 pN, the two proteins separated without significant structural distortion. These findings suggest that protein unfolding is not coupled to the adhesive function of CD2 and CD58. The simulations further confirm that salt bridges primarily determine the tensile strength of the protein-to-protein bond, and that the order of salt bridge rupture depends mainly on the position of the bond, relative to the line of action of the applied force. Salt bridges close to this line break first. The importance of each of the salt bridges for adhesion, determined from the simulations, correlates closely with their role in cell-to-cell adhesion and equilibrium binding determined by site-directed mutagenesis experiments.

Binding Sites↗

Functional analysis of the structural basis of homophilic cadherin adhesion.

The structures of many cell surface adhesion proteins comprise multiple tandem repeats of structurally similar domains. In many cases, the functional significance of this architecture is unknown, and there are several cases in which evidence for individual domain involvement in adhesion has been contradictory. In particular, the extracellular region of the adhesion glycoprotein cadherin consists of five tandemly arranged domains. One proposed mechanism postulated that adhesion involves only trans interactions between the outermost domains. However, subsequent investigations have generated several competing models. Here we describe direct measurements of the distance-dependent interaction potentials between cadherin mutants lacking different domains. By quantifying both the absolute distances at which opposed cadherin fragments bind and the quantized changes in the interaction potentials that result from deletions of individual domains, we demonstrate that two domains participate in homophilic cadherin binding. This finding contrasts with the current view that cadherins bind via a single, unique site on the protein surface. The potentials that result from interactions involving multiple domains generate a novel, modular binding mechanism in which opposed cadherin ectodomains can adhere in any of three antiparallel alignments.

Binding Sites↗

Chain-length dependence of the protein and cell resistance of oligo(ethylene glycol)-terminated self-assembled monolayers on gold.

Oligo(ethylene glycol) (O-EG(n))-terminated alkanethiol surface-assembled monolayers (SAMs) have been reported to demonstrate protein-resistant properties similar to those of poly(ethylene glycol) (PEG). In this study, we compared the relative protein resistance of short and long ethylene oxide chains, SAMs of PEG 5000, PEG 2000, O-EG(3) (molecular weight = 120), and O-EG(6) (molecular weight = 240), on gold surfaces. Surface plasmon resonance showed that these monolayers were all protein-resistant within the uncertainty of the measurement. However, they exhibited different adhesive properties toward 3T3 mouse fibroblast adhesion in supplemented Dulbecco's modified Eagles medium. The results show that the cell adhesion was sensitive to the concentration of proteins supplemented in the culture medium and to the length of PEG chains.

3T3 Cells↗

Direct measurements of multiple adhesive alignments and unbinding trajectories between cadherin extracellular domains.

Direct measurements of the interactions between antiparallel, oriented monolayers of the complete extracellular region of C-cadherin demonstrate that, rather than binding in a single unique orientation, the cadherins adhere in three distinct alignments. The strongest adhesion is observed when the opposing extracellular fragments are completely interdigitated. A second adhesive alignment forms when the interdigitated proteins separate by 70 +/- 10 A. A third complex forms at a bilayer separation commensurate with the approximate overlap of cadherin extracellular domains 1 and 2 (CEC1-2). The locations of the energy minima are independent of both the surface density of bound cadherin and the stiffness of the force transducer. Using surface element integration, we show that two flat surfaces that interact through an oscillatory potential will exhibit discrete minima at the same locations in the force profile measured between hemicylinders covered with identical materials. The measured interaction profiles, therefore, reflect the relative separations at which the antiparallel proteins adhere, and are unaffected by the curvature of the underlying substrate. The successive formation and rupture of multiple protein contacts during detachment can explain the observed sluggish unbinding of cadherin monolayers. Velocity-distance profiles, obtained by quantitative video analysis of the unbinding trajectory, exhibit three velocity regimes, the transitions between which coincide with the positions of the adhesive minima. These findings suggest that cadherins undergo multiple stage unbinding, which may function to impede adhesive failure under force.

Animals↗

Force as a probe of membrane protein structure and function.

Force measurement techniques are being used increasingly to explore the mechanical properties of proteins, as well as the structural origins of intermolecular forces. Developments in instrumentation and the increasing availability of engineered and purified membrane proteins have widely expanded the range of biological systems that can be addressed. Within the past year, force measurements have identified novel mechanisms of binding between cell-surface proteins, as well as the mechanical properties of integral membrane proteins and the intramolecular interactions that stabilize their structures.

Cadherins↗

Mechanism of homophilic cadherin adhesion.

Direct measurements of the distance-dependent forces between membrane-bound cadherins were used to test current models of homophilic cadherin interactions. The results reveal a complex binding mechanism in which the proteins adhere in multiple alignments that involve more than the amino-terminal domains.

Animals↗

Measuring the forces that control protein interactions.

Although the force fields and interaction energies that control protein behavior can be inferred indirectly from equilibrium and kinetic measurements, recent developments have made it possible to quantify directly (a) the ranges, magnitudes, and time dependence of the interaction energies and forces between biological materials; (b) the mechanical properties of isolated proteins; and (c) the strength of single receptor-ligand bonds. This review describes recent results obtained by using the atomic force microscope, optical tweezers, the surface force apparatus, and micropipette aspiration to quantify short-range protein-ligand interactions and the long-range, nonspecific forces that together control protein behavior. The examples presented illustrate the power of force measurements to quantify directly the force fields and energies that control protein behavior.

Chemical Phenomena↗

Direct molecular force measurements of multiple adhesive interactions between cadherin ectodomains.

Direct-force measurements of the interactions between recombinant C-cadherin from Xenopus demonstrated that the ectodomain of cadherin exhibits multiple adhesive contacts that involve successive domains along the extracellular region of the protein. Contacts between the fully interdigitated antiparallel proteins form the strongest adhesive interaction. A second weaker minimum was measured when the interdigitated proteins were separated by a distance equal to the length of one domain of the extracellular (EC) fragment and corresponding to the antiparallel alignment of domains one through four (EC1 through EC4). The successive rupture of these interactions generates an unbinding force profile that may be optimized to impede the abrupt failure of cadherin-mediated junctions under force.

Journal Article↗

Grafted poly(ethylene oxide) brushes as nonfouling surface coatings.

The identification of design criteria for the prevention of surface fouling by protein adsorption has been an elusive research goal. The current ideas in this domain assume two different directions. One focuses on correlating protein adsorption with macroscopic surface properties such as the water wettability. The second approach involves tailoring the molecular interactions between the adsorbing proteins and the surface. In this paper, we focus on the experimental results and theoretical ideas concerned with tuning the interfacial forces by means of terminally grafted PEO chains.

Adsorption↗

Direct molecular level measurements of the electrostatic properties of a protein surface.

In this work, we used direct measurements with the surface force apparatus to determine the pH-dependent electrostatic charge density of a single binding face of streptavidin. Mean field calculations have been used with considerable success to model electrostatic potential fields near protein surfaces, but these models and their inherent assumptions have not been tested directly at the molecular level. Using the force apparatus and immobilized, oriented monolayers of streptavidin, we measured a pI of 5-5.5 for the biotin-binding face of the protein. This differs from the pI of 6.3 for the soluble protein and confirms that we probed the local electrostatic features of the macromolecule. With finite difference solutions of the linearized Poisson-Boltzmann equation, we then calculated the pH-dependent charge densities adjacent to the same face of the protein. These calculated values agreed quantitatively with those obtained by direct force measurements. Although our study focuses on the pH-dependence of surface electrostatics, this direct approach to probing the electrostatic features of proteins is applicable to investigations of any perturbations that alter the charge distribution of the surfaces of immobilized molecules.

Binding Sites↗

Molecular forces between membranes displaying neutral glycosphingolipids: evidence for carbohydrate attraction.

The surface force apparatus was used to determine the fundamental forces governing the adhesion between mixed bilayer membranes comprising lactosyl ceramide (LacCer) and di-tridecanoyl-phosphatidyl choline. Forces between membranes were quantified as a function of the glycolipid surface densities, which ranged from 0 to 30 mol %. Control measurements of the forces between pure phosphatidylcholine membranes and mixed bilayers of lactosyl ceramide with phosphocholine showed that the steric thickness of the carbohydrate headgroups increased from 19 to 25 A when the glycolipid density increased from 10 to 20 mol %. The layer compressibility also decreased with increasing carbohydrate coverage, but the corresponding adhesion between lactosyl ceramide-containing membranes increased with increasing amounts of glycosphingolipid in them. The nonspecific van der Waals forces accounted for the attraction measured in the control experiments and that between identical 10 mol % LacCer bilayers. However, the increase in the adhesion with increasing glycolipid density was 2-4 times greater than predicted by Lifschitz theory. Additionally, the forces measured during separation of membranes containing 20 and 30 mol % glycosphingolipid indicated that the headgroups bind and rearrange during bilayer detachment. The interactions between the carbohydrates are weak and apparently dynamic, and they generate an additional density-dependent intermembrane attraction that is on the order of the van der Waals force.

Adsorption↗

Measurements of attractive forces between proteins and end-grafted poly(ethylene glycol) chains.

The surface force apparatus was used to measure directly the molecular forces between streptavidin and lipid bilayers displaying grafted Mr 2,000 poly(ethylene glycol) (PEG). These measurements provide direct evidence for the formation of relatively strong attractive forces between PEG and protein. At low compressive loads, the forces were repulsive, but they became attractive when the proteins were pressed into the polymer layer at higher loads. The adhesion was sufficiently robust that separation of the streptavidin and PEG uprooted anchored polymer from the supporting membrane. These interactions altered the properties of the grafted chains. After the onset of the attraction, the polymer continued to bind protein for several hours. The changes were not due to protein denaturation. These data demonstrate directly that the biological activity of PEG is not due solely to properties of simple polymers such as the excluded volume. It is also coupled to the competitive interactions between solvent and other materials such as proteins for the chain segments and to the ability of this material to adopt higher order intrachain structures.

Bacterial Proteins↗