Search PubMed⌕ Search

Biomedical subjects

D L Stokes

Publications and source records attributed to D L Stokes.

At least 37 records · Page 2Linked to original sources
PubMed1998

Structure of the Ca2+ pump of sarcoplasmic reticulum: a view along the lipid bilayer at 9-A resolution.

We have used multilamellar crystals of the ATP-driven calcium pump from sarcoplasmic reticulum to address the structural effects of calcium binding to the enzyme. They are stacks of disk-shaped two-dimensional crystals. A density map projected along the lipid bilayer was obtained at 9-A resolution by frozen-hydrated electron microscopy. Although only in projection, much more details of the structure were revealed than previously available, especially in the transmembrane region. Quantitative comparison was made with the model obtained from the tubular crystals of this enzyme formed in the absence of calcium. Unexpectedly large differences in conformation were found, particularly in the cytoplasmic domain.

Animals↗
PubMed1997

The ATP-binding site of Ca(2+)-ATPase revealed by electron image analysis.

The location of the ATP-binding site of a P-type ion pump, Ca(2+)-ATPase from rabbit sarcoplasmic reticulum, was examined by cryoelectron microscopy. A nonhydrolyzable analog of ATP, beta, gamma-bidentate chromium (III) complex of ATP (CrATP), was used to stabilize the enzyme in the Ca(2+)-occluded state. Tubular crystals were then induced by vanadate in the presence of EGTA, keeping CrATP bound to the enzyme. The three-dimensional structures of the crystals were determined at 14 A resolution by cryoelectron microscopy and helical image analysis. Statistical comparison of the structures with and without CrATP showed clear and significant differences at the groove proposed previously as the ATP-binding pocket.

Adenosine Triphosphate↗
PubMed1997

How to make tubular crystals by reconstitution of detergent-solubilized Ca2(+)-ATPase.

In an attempt to better define the parameters governing reconstitution and two-dimensional crystallization of membrane proteins, we have studied Ca2(+)-ATPase from rabbit sarcoplasmic reticulum. This ion pump forms vanadate-induced crystals in its native membrane and has previously been reconstituted at high lipid-to-protein ratios for functional studies. We have characterized the reconstitution of purified Ca2(+)-ATPase at low lipid-to-protein ratios and discovered procedures that produce long, tubular crystals suitable for helical reconstruction. C12E8 (n-dodecyl-octaethylene-glycol monoether) was used to fully solubilize various mixtures of lipid and purified Ca2(+)-ATPase, and BioBeads were then used to remove the C12E8. Slow removal resulted in two populations of vesicles, and the proteoliposome population was separated from the liposome population on a sucrose density gradient. These proteoliposomes had a lipid-to-protein ratio of 1:2, and virtually 100% of molecules faced the outside of vesicles, as determined by fluorescein isothiocyanate labeling. Cycles of freeze-thaw caused considerable aggregation of these proteoliposomes, and, if phosphatidyl ethanolamine and phosphatidic acid were included, or if the bilayers were doped with small amounts of C12E8, vanadate-induced tubular crystals grew from the aggregates. Thus our procedure comprised two steps-reconstitution followed by crystallization-allowing us to consider mechanisms of bilayer formation separately from those of crystallization and tube formation.

Animals↗
PubMed1997

Keeping calcium in its place: Ca(2+)-ATPase and phospholamban.

Electron microscopy is gradually revealing more and more about the structure of the calcium pump from the sarcoplasmic reticulum, Ca(2+)-ATPase. The most recent result reveals the ATP-binding site, and two different avenues are being pursued towards achieving a higher resolution structure. Although no such structures are currently available for phospholamban, various spectroscopies and site-directed mutagenesis have been combined to produce a compelling structural model for its regulation of Ca(2+)-ATPase.

Binding Sites↗
PubMed1996

Purified, reconstituted cardiac Ca2+-ATPase is regulated by phospholamban but not by direct phosphorylation with Ca2+/calmodulin-dependent protein kinase.

Regulation of calcium transport by sarcoplasmic reticulum provides increased cardiac contractility in response to beta-adrenergic stimulation. This is due to phosphorylation of phospholamban by cAMP-dependent protein kinase or by calcium/calmodulin-dependent protein kinase, which activates the calcium pump (Ca2+-ATPase). Recently, direct phosphorylation of Ca2+-ATPase by calcium/calmodulin-dependent protein kinase has been proposed to provide additional regulation. To investigate these effects in detail, we have purified Ca2+-ATPase from cardiac sarcoplasmic reticulum using affinity chromatography and reconstituted it with purified, recombinant phospholamban. The resulting proteoliposomes had high rates of calcium transport, which was tightly coupled to ATP hydrolysis (approximately 1.7 calcium ions transported per ATP molecule hydrolyzed). Co-reconstitution with phospholamban suppressed both calcium uptake and ATPase activities by approximately 50%, and this suppression was fully relieved by a phospholamban monoclonal antibody or by phosphorylation either with cAMP-dependent protein kinase or with calcium/calmodulin-dependent protein kinase. These effects were consistent with a change in the apparent calcium affinity of Ca2+-ATPase and not with a change in Vmax. Neither the purified, reconstituted cardiac Ca2+-ATPase nor the Ca2+-ATPase in longitudinal cardiac sarcoplasmic reticulum vesicles was a substrate for calcium/calmodulin-dependent protein kinase, and accordingly, we found no effect of calcium/calmodulin-dependent protein kinase phosphorylation on Vmax for calcium transport.

Adenosine Triphosphate↗
PubMed1996

Lamellar stacking in three-dimensional crystals of Ca(2+)-ATPase from sarcoplasmic reticulum.

Electron microscopy of multilamellar crystals of CA(2+)-ATPase currently offers the best opportunity for obtaining a high-resolution structure of this ATP-driven ion pump. Under certain conditions small, wormlike crystals are formed and provide views parallel to the lamellar plane, from which parameters of lamellar stacking can be directly measured. Assuming that molecular packing is the same, data from these views could supplement those obtained by tilting large, thin platelike crystals. However, we were surprised to discover that the lamellar spacing was variable and depended on the amount of glycerol present during crystallization (20% versus 5%). Projection maps (h,0,l) from these womklike crystals suggest different molecular contacts that give rise to the different lamellar spacings. Based on an orthogonal projection map (h,k,0) from collapsed, wormlike crystals and on x-ray powder patterns, we conclude that molecular packing within the lamellar plane is the same as that in thin, platelike crystals and is unaffected by glycerol. Finally, the orientation of molecules in the lamellar plane was characterized from freeze-dried, shadowed crystals. Comparing the profile of molecules in these multilamellar crystals with that previously observed in helical tubes induced by vanadate gives structural evidence of the conformational change that accompanies binding of calcium of Ca(2+)-ATPase.

Animals↗
PubMed1995

Functional reconstitution of recombinant phospholamban with rabbit skeletal Ca(2+)-ATPase.

Phospholamban (PLB) is a small, transmembrane protein that resides in the cardiac sarcoplasmic reticulum (SR) and regulates the activity of Ca(2+)-ATPase in response to beta-adrenergic stimulation. We have used the baculovirus expression system in Sf21 cells to express milligram quantities of wild-type PLB. After purification by antibody affinity chromatography, the function of this recombinant PLB was tested by reconstitution with Ca(2+)-ATPase purified from skeletal SR. The results obtained with recombinant PLB were indistinguishable from those obtained with purified, canine cardiac PLB. In particular, PLB reduced the apparent calcium affinity of Ca(2+)-ATPase but had no effect on Vmax. At pCa 6.8, PLB inhibited both calcium uptake and ATPase activity of Ca(2+)-ATPase by 50%. This inhibition was fully reversed by addition of a monoclonal antibody to PLB, which mimics the physiological effects of PLB phosphorylation. Maximal PLB regulatory effects occurred at a molar stoichiometry of approximately 3:1, PLB/Ca(2+)-ATPase. We also investigated peptides corresponding to the two main domains of PLB. The membrane-spanning domain, PLB26-52, appeared to uncouple ATPase hydrolysis from calcium transport, even though the permeability of the reconstituted vesicles was not altered. The cytoplasmic peptide, PLB1-31, had little effect, even at a 300:1 molar excess over Ca(2+)-ATPase.

Animals↗
PubMed1995

Secondary structure and orientation of phospholamban reconstituted in supported bilayers from polarized attenuated total reflection FTIR spectroscopy.

We have studied the secondary structure of native phospholamban (PLB), a 52-residue integral membrane protein that regulates calcium uptake into the cardiac sarcoplasmic reticulum, as well as its 27-residue carboxy-terminal transmembrane segment (PLB26-52). The relative contents of alpha-helix, beta-strand, and random coil, as well as the spatial orientations of the alpha-helices of these molecules, reconstituted in dimyristoylphosphatidylcholine (DMPC) and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) bilayer membranes, were determined using polarized attenuated total reflection (ATR) Fourier transform infrared (FTIR) spectroscopy. The major component of the amide I' bands of PLB and PLB26-52 was centered at 1654-1657 cm-1 and was assigned to alpha-helix. The fraction of alpha-helix in native PLB was 64-67% (33-35 residues), and the transmembrane peptide PLB26-52 contained 73-82% alpha-helix (20-22 residues); small fractions of beta- and random structures were also identified. The orientational order parameter (S) of the alpha-helical component of PLB26-52 in DMPC was S = 0.86 +/- 0.09, indicating that the transmembrane helix was oriented approximately perpendicular to the membrane plane. Assuming the transmembrane domain of PLB resembles the peptide PLB26-52, the additional alpha-helical residues in PLB were assigned to the cytoplasmic helix and determined to have an order parameter S = -0.15 +/- 0.30. This may imply that the cytoplasmic helix was tilted from the membrane normal by an angle of 61 +/- 13 degrees or, alternatively, may indicate a wide angular distribution.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗
PubMed1995

Preparation and analysis of large, flat crystals of Ca(2+)-ATPase for electron crystallography.

Obtaining large, flat, well ordered crystals represents the key to structure determination by electron crystallography. Multilamellar crystals of Ca(2+)-ATPase are a good candidate for this methodology, and we have optimized methods of crystallization and of preparation for cryoelectron microscopy. In particular, high concentrations of glycerol were found to prevent nucleation and to reduce stacking; thus, by seeding solutions containing 40% glycerol, we obtained thin crystals that were 5-30 microns in diameter and 2-10 unit cells thick. We found that removing vesicles and minimizing concentrations of divalent cations were critical to preparing flat crystals in the frozen-hydrated state. Finally, we developed two methods for determining the number of lamellae composing individual crystals, information that is required for structure determination of this crystal form. The first method, using low magnification images of freeze-dried crystals, is more practical in our case. Nevertheless, the alternative method, involving analysis of Laue zones from electron diffraction patterns of slightly tilted crystals, may be of general use in structure determination from thin, three-dimensional crystals.

Animals↗
PubMed1994

Surface-enhanced Raman gene probes.

We report for the first time a new type of DNA gene probe based on surface-enhanced Raman scattering (SERS) label detection. The surface-enhanced Raman gene (SERG) probes do not require the use of radioactive labels and have great potential to provide both sensitivity and selectivity. The SERG probe can be used to detect DNA biotargets (e.g., gene sequences, bacteria, viral DNA fragments) via hybridization to DNA sequences complementary to that probe. The analytical figures of merit and its applications in environmental and biomedical areas are discussed.

DNA Probes↗
PubMed1994

Structure, transmembrane topology and helix packing of P-type ion pumps.

Electron microscopy has recently provided improved structures for P-type ion pumps. In the case of Ca(2+)-ATPase, the use of unstained specimens revealed the structure of the transmembrane domain. The composition of this domain has been controversial due to the variety of methods used to study the number and exact locations of transmembrane crossings within the sequence. After reviewing the results from several members of the family, we found a consensus for 10 transmembrane segments, and also that 10 helices fitted well into the structure of Ca(2+)-ATPase. Thus, we present the most detailed model for transmembrane structure so far, in the hope of stimulating more precise experimental strategies.

Calcium-Transporting ATPases↗
PubMed1994

Conformation of Ca(2+)-ATPase in two crystal forms. Effects of Ca2+, thapsigargin, adenosine 5'-(beta, gamma-methylene)triphosphate), and chromium(III)-ATP on crystallization.

The structure of Ca(2+)-ATPase has been studied by electron microscopy of two different crystal forms: one tubular form induced by vanadate in native sarcoplasmic reticulum (SR) membranes and another multilamellar form grown from detergent-solubilized SR. To determine the conformation of Ca(2+)-ATPase within each crystal form, the respective effects of Ca2+, thapsigargin, adenosine 5'-(beta, gamma-methylene)triphosphate) (AMP-PCP), and chromium(III) (Cr-ATP) on crystallization have been studied. Vanadate-induced tubes were prevented from forming by micromolar Ca2+, but if preformed in the absence of Ca2_, millimolar Ca2+ was required to disrupt these crystals. Thapsigargin promoted tube formation even in the presence of 10 mM Ca2+. Neither AMP-PCP nor Cr-ATP prevented tube formation, and the Ca2+ sensitivity of tube formation from Cr-ATP-inhibited SR was identical to controls. Multilamellar crystals required at least 0.2 mM Ca2+ and were prevented from forming by thapsigargin, AMP-PCP, or Cr-ATP. It is concluded that helical tubes are composed of the Ca(2+)-free, dephosphorylated conformation (E), and the nucleotide-bound conformation (E-ATP) is also tolerated. In contrast, multilamellar crystals are composed of the Ca(2+)-bound conformation (E.Ca2) and do not tolerate nucleotide binding. Thus, comparison of structures obtained from the two crystal forms should reveal physiologically relevant conformational differences.

Adenosine Triphosphate↗
PubMed1993

Three-dimensional cryo-electron microscopy of the calcium ion pump in the sarcoplasmic reticulum membrane.

The ATP-driven calcium pump (Ca(2+)-ATPase) is an integral membrane protein (M(r) 110K) which relaxes striated muscle by pumping calcium out of the cytoplasm into the sarcoplasmic reticulum against a large concentration gradient. Recent efforts have attempted to relate the sequence of Ca(2+)-ATPase to its structure and function. In particular, site-directed mutagenesis has identified critical amino-acid residues, and its predicted secondary structure, which includes ten transmembrane helices, has gained experimental support. But direct visualization of the molecule has so far been limited to the cytoplasmic domains at low resolution. We present here the three-dimensional structure of Ca(2+)-ATPase in the native sarcoplasmic reticulum membrane at 14 A resolution, determined by cryo-electron microscopy and helical image analysis. The structure shows an unexpected transmembrane organization, consisting of three distinct segments, one of which is highly inclined. These features can be related to earlier predictions of secondary structure.

Amino Acid Sequence↗
PubMed1992

Atomic force microscopy of three-dimensional membrane protein crystals. Ca-ATPase of sarcoplasmic reticulum.

We have observed three-dimensional crystals of the calcium pump from sarcoplasmic reticulum by atomic force microscopy (AFM). From AFM images of dried crystals, both on graphite and mica, we measured steps in the crystal thickness, corresponding to the unit cell spacing normal to the substrate. It is known from transmission electron microscopy that crystal periodicity in the plane of the substrate is destroyed by drying, and it was therefore not surprising that we were unable to observe this periodicity by AFM. Thus, we were motivated to use the AFM on hydrated crystals. In this case, crystal adsorption appeared to be a limiting factor, and our studies indicate that adsorption is controlled by the composition of the medium and by the physical-chemical properties of the substrate. We used scanning electron microscopy to determine the conditions yielding the highest adsorption of crystals, and, under these conditions, we have obtained AFM images of hydrated crystals with a resolution similar to that observed with dried samples (i.e., relatively poor). In the same preparations, we have observed lipid bilayers with a significantly better resolution, indicating that the poor quality of crystal images was not due to instrumental limitations. Rather, we attribute poor images to the intrinsic flexibility of these multilamellar crystals, which apparently allow movement of one layer relative to another in response to shear forces from the AFM tip. We therefore suggest some general guidelines for future studies of membrane proteins with AFM.

Animals↗
PubMed1992

Structural modelling of P-type ion pumps.

Over forty sequences of P-type ion pumps have been determined. They fall into five families showing between 20% and 50% identity in sequence. The conserved residues are concentrated in several regions which are found in all the pumps. All the defined functional sites are associated with conserved segments and provide a basis for subdivision into domains, to which tentative secondary and tertiary structures can be assigned. The domains have been assembled into a structure consisting of a conserved core with variable loops and deletions on the surface, which accommodates site mutants, affinity labels and known epitopes. This model has been correlated with the results of an electron crystallographic study of the Ca++ pump. Two types of crystal have been examined in negative stain and in amorphous ice; thin plates which diffract to 4A and long helical tubes which diffract to 15A. The plates have given a 6A projection map, some of which can be interpreted by difference from the map of the negatively stained crystal, as transmembrane helices. Three dimensional interpretation will require a tilt series. In the meantime, analysis of the tubes has given a 14A 3D map which clearly defines the cytoplasmic domains and their relation to the transmembrane region (Stokes and Toyoshima in preparation). Although it is not yet possible to assign specific functions to the cytoplasmic lobes, the structure at this resolution is consistent with the model.

Animals↗
PubMed1991

Growth conditions control the size and order of actin bundles in vitro.

The bonding rules for actin filament bundles do not lead to a particular packing symmetry, but allow for either regular or disordered filament packing. Indeed, both hexagonal and disordered types of packing are observed in vivo. To investigate factors which control bundle order, as well as size, we examined the effect of protein concentration on the growth of actin-fascin bundles in vitro. We found that bundles require 4-8 d to achieve both maximum size and order. The largest and best ordered bundles were grown at low fascin and high actin concentrations (an initial fascin/actin ratio of 1:200). In contrast, a much larger number of poorly ordered bundles were formed at ratios of 1:25 and 1:50, and most surprisingly, no bundles were formed at 1:300 or 1:400. Based on these observations we propose a two-stage mechanism for bundle growth. The first stage is dominated by nucleation, which requires relatively high concentrations of fascin and which is therefore accompanied by rapid growth. Below some concentration threshold, nucleation ceases and bundles enter the second stage of slow growth, which continues until the supply of fascin is exhausted. By analogy with crystallization, we hypothesize that slower growth produces better order. We are able to use this mechanism to explain our observations as well as previous observations of bundle growth both in vitro and in vivo.

Actin Cytoskeleton↗