Search PubMed⌕ Search

Biomedical subjects

D L Kaplan

Publications and source records attributed to D L Kaplan.

At least 19 recordsLinked to original sources
PubMed2006

Silk based biomaterials to heal critical sized femur defects.

Bone auto- and allografts have inherent drawbacks, therefore the treatment of non-unions and critical size defects in load bearing long bones would benefit from the use of osteopromotive biodegradable, biocompatible and mechanically durable matrices to enhance migration or delivery of cell populations and/or morphogens/cytokines. Silk fibroin biomaterial scaffolds were evaluated as osteopromotive matrices in critical sized mid-femoral segmental defects in nude rats. Four treatment groups were assessed over 8 weeks in vivo: silk scaffolds (SS) with human mesenchymal stem cells (hMSCs) that had previously been differentiated along an osteoblastic lineage in vitro (group I; pdHMSC/SS); SS with undifferentiated hMSCs (group II; udHMSC/SS); SS alone (group III; SS); and empty defects (group IV). When hMSCs were cultured in vitro in osteogenic medium for 5 weeks, bone formation was characterized with bimodal peak activities for alkaline phosphatase at 2 and 4 weeks. Calcium deposition started after 1 week and progressively increased to peak at 4 weeks, reaching cumulative levels of deposited calcium at 16 mug per mg scaffold wet weight. In vivo osteogenesis was characterized by almost bridged defects with newly formed bone after 8 weeks in group I. Significantly (P < 0.01) greater bone volumes were observed with the pdHMSC/SS (group I) implants than with groups II, III or IV. These three groups failed to induce substantial new bone formation and resulted in the ingrowth of cells with fibroblast-like morphology into the defect zone. The implantation of pdHMSC/SS resulted in significantly (P < 0.05) greater maximal load and torque when compared to the other treatment regimens. The pdHMSC/SS implants demonstrated osteogenic ability in vitro and capacity to thrive towards the healing of critical size femoral segmental defects in vivo. Thus, these new constructs provide an alternative protein-based biomaterial for load bearing applications.

Alkaline Phosphatase↗
PubMed2006

Silk fibroin as an organic polymer for controlled drug delivery.

The pharmaceutical utility of silk fibroin (SF) materials for drug delivery was investigated. SF films were prepared from aqueous solutions of the fibroin protein polymer and crystallinity was induced and controlled by methanol treatment. Dextrans of different molecular weights, as well as proteins, were physically entrapped into the drug delivery device during processing into films. Drug release kinetics were evaluated as a function of dextran molecular weight, and film crystallinity. Treatment with methanol resulted in an increase in beta-sheet structure, an increase in crystallinity and an increase in film surface hydrophobicity determined by FTIR, X-ray and contact angle techniques, respectively. The increase in crystallinity resulted in the sustained release of dextrans of molecular weights ranging from 4 to 40 kDa, whereas for less crystalline films sustained release was confined to the 40 kDa dextran. Protein release from the films was studied with horseradish peroxidase (HRP) and lysozyme (Lys) as model compounds. Enzyme release from the less crystalline films resulted in a biphasic release pattern, characterized by an initial release within the first 36 h, followed by a lag phase and continuous release between days 3 and 11. No initial burst was observed for films with higher crystallinity and subsequent release patterns followed linear kinetics for HRP, or no substantial release for Lys. In conclusion, SF is an interesting polymer for drug delivery of polysaccharides and bioactive proteins due to the controllable level of crystallinity and the ability to process the biomaterial in biocompatible fashion under ambient conditions to avoid damage to labile compounds to be delivered.

Adsorption↗
PubMed2005

Bacterial cellulose as a potential scaffold for tissue engineering of cartilage.

Tissue constructs for cartilage with native mechanical properties have not been described to date. To address this need the bacterial cellulose (BC) secreted by Gluconacetobacter xylinus (= Acetobacter xylinum) was explored as a novel scaffold material due to its unusual material properties and degradability. Native and chemically modified BC materials were evaluated using bovine chondrocytes. The results indicate that unmodified BC supports chondrocyte proliferation at levels of approximately 50% of the collagen type II substrate while providing significant advantages in terms of mechanical properties. Compared to tissue culture plastic and calcium alginate, unmodified BC showed significantly higher levels of chondrocyte growth. Chemical sulfation and phosphorylation of the BC, performed to mimic the glucosaminoglycans of native cartilage, did not enhance chondrocyte growth while the porosity of the material did affect chondrocyte viability. The BC did not induce significant activation of proinflammatory cytokine production during in vitro macrophage screening. Hence, unmodified BC was further explored using human chondrocytes. TEM analysis and RNA expression of the collagen II from human chondrocytes indicated that unmodified BC supports proliferation of chondrocytes. In addition, ingrowth of chondrocytes into the scaffold was verified by TEM. The results suggest the potential for this biomaterial as a scaffold for tissue engineering of cartilage.

Animals↗
PubMed2004

Mechanical stimulation promotes osteogenic differentiation of human bone marrow stromal cells on 3-D partially demineralized bone scaffolds in vitro.

Bone is a dynamic tissue that is able to sense and adapt to mechanical stimuli by modulating its mass, geometry, and structure. Bone marrow stromal cells (BMSCs) are known to play an integral part in bone formation by providing an osteoprogenitor cell source capable of differentiating into mature osteoblasts in response to mechanical stresses. Characteristics of the in vivo bone environment including the three dimensional (3-D) lacunocanalicular structure and extracellular matrix composition have previously been shown to play major roles in influencing mechanotransduction processes within bone cells. To more accurately model this phenomenon in vitro, we cultured human BMSCs on 3-D, partially demineralized bone scaffolds in the presence of four-point bending loads within a novel bioreactor. The effect of mechanical loading and dexamethasone concentration on BMSC osteogenic differentiation and mineralized matrix production was studied for 8 and 16 days of culture. Mechanical stimulation after 16 days with 10 nM dexamethasone promoted osteogenic differentiation of BMSCs by significantly elevating alkaline phosphatase activity as well as alkaline phosphatase and osteopontin transcript levels over static controls. Mineralized matrix production also increased under these culture conditions. Dexamethasone concentration had a dramatic effect on the ability of mechanical stimulation to modulate these phenotypic and genotypic responses. These results provide increased insight into the role of mechanical stimulation on osteogenic differentiation of human BMSCs in vitro and may lead to improved strategies in bone tissue engineering.

Adult↗
PubMed2002

Bioengineered emulsans from Acinetobacter calcoaceticusRAG-1 transposon mutants.

Transposon mutants of Acinetobacter calcoaceticus strain RAG-1 were studied in an effort to control fatty acid (FA) substitution patterns of emulsan, a bioemulsifier secreted by the organism. The disrupted genes, involved in the biosynthetic pathways of biotin, histidine, cysteine or purines, influenced the level and types of FAs incorporated into emulsan. The structural variants of emulsan generated by the transposon mutants were characterized for yield, FA content, molecular weight, and emulsification behavior when grown on a series of FAs of different chain lengths from C11 to C18. Yields of emulsan from the transposon mutants were found to be lower than the parent strain and depended on the type of FA used to supplement the growth medium. Mutants 13D (His-) and 52D (Cys-) grown on LB plus C16 or C14, respectively, exhibited enhanced emulsifying activity compared to A. calcoaceticus RAG-1. The presence and composition of long chain FAs on the polysaccharide backbone influenced emulsification behavior: particularly a high mole percentage of C16 (48%) and C18 (42%). The results provide important insight into the bioengineering of bioemulsifier-producing microorganisms and provide a path towards highly tailored novel amphipathic structures to utilize as biodegradable in environmental, biomedical, and personal care applications.

Acinetobacter calcoaceticus↗
PubMed2001

Surface organization and nanopatterning of collagen by dip-pen nanolithography.

Collagen is a key fibrous protein in biological systems, characterized by a complex structural hierarchy as well as the ability to self-assemble into liquid crystalline mesophases. The structural features of collagen influence cellular responses and material properties, with importance for a wide range of biomaterials and tissue architectures. The mechanism by which fibrillar collagen structures form from liquid crystalline mesophases is not well characterized. We report positive printing of collagen and a collagen-like peptide down to 30-50-nm line widths, using the atomic force microscopy technique of dip-pen nanolithography. The method preserved the triple-helical structure and biological activity of collagen and even fostered the formation of characteristic higher levels of structural organization. The "direct-write" capability of biologically relevant molecules, while preserving their structure and functionality, provides tremendous flexibility in future biological device applications and in proteomics arrays, as well as a new strategy to study the important hierarchical assembly processes of biological systems.

Collagen↗
PubMed2001

Functionalized silk-based biomaterials for bone formation.

Silks are being reassessed as biomaterial scaffolds due to their unique mechanical properties, opportunities for genetic tailoring of structure and thus function, and recent studies clarifying biocompatibility. We report on the covalent decoration of silk films with integrin recognition sequences (RGD) as well as parathyroid hormone (PTH, 1-34 amino acids) and a modified PTH 1-34 (mPTH) involved in the induction of bone formation. Osteoblast-like cell (Saos-2) responses to the decorated silk films indicate that the proteins serve as suitable bone-inducing matrices. Osteoblast-like cell adhesion was significantly increased on RGD and PTH compared to plastic, mPTH, and the control peptide RAD. At 2 weeks of culture, message levels of alkaline phosphatase were similar on all substrates, but by 4 weeks, alkaline phosphatase mRNA was greatest on RGD. At 2 weeks of culture, alpha 1(I) procollagen mRNA was elevated on silk, RGD, RAD, and PTH, and hardly detectable on mPTH and plastic. However, by 4 weeks RGD demonstrated the highest level compared to the other substrates. Osteocalcin message levels detected by RT-PCR were greatest on RGD at both time points. Calcification was also significantly elevated on RGD compared to the other substrates with an increase in number and size of the mineralized nodules in culture. Thus, RGD covalently decorated silk appears to stimulate osteoblast-based mineralization in vitro.

Animals↗
PubMed2001

Reducing maltreated children's reluctance to answer hypothetical oath-taking competency questions.

Before allowing child witnesses to testify, courts routinely require children to describe what would happen to them if they lied. However, young children often refuse to reason hypothetically if they view the premises as implausible or undesirable, and might be more willing to discuss the consequences of lying if they are asked about another child rather than themselves. On the other hand, children might view themselves as invulnerable to punishment, and therefore believe that whereas other children will be punished for lying, they will not be. In this study, 64 maltreated 5- and 6-year-old children were asked to describe the consequences of lying to three professionals (a judge, a social worker, and a doctor). Participants in the "self" condition were asked what would happen to them if they lied, whereas participants in the "other" condition were asked to describe what would happen to a story child if he or she lied. Asking children about "other" children increased responsiveness, and did not reveal perceptions of invulnerability. The results suggest that young children's understanding that they will be punished for lying may make them reluctant to discuss the consequences of lying, leading to underestimation of their oath-taking competency.

Child↗
PubMed2001

Direct incorporation of glucosamine and N-acetylglucosamine into exopolymers by Gluconacetobacter xylinus (=Acetobacter xylinum) ATCC 10245: production of chitosan-cellulose and chitin-cellulose exopolymers.

Gluconacetobacter xylinus (=Acetobacter xylinum) ATCC 10245 incorporated 2-amino-2-deoxy-D-glucose (glucosamine) and 2-acetamido-2-deoxy-D-glucose (N-acetylglucosamine), but not 3-O-methyl-D-glucose or 2-deoxy-D-glucose into exopolymers. Incorporation was confirmed by gas chromatography with and without mass spectrometry, Fourier transform infrared, and 1H nuclear magnetic resonance. The average molar percentage of glucosamine and N-acetylglucosamine in the exopolymers was about 18%.

Acetylglucosamine↗
PubMed2001

Randomized controlled trial of the tolerability, safety, and efficacy of adapalene gel 0.1% and tretinoin microsphere gel 0.1% for the treatment of acne vulgaris.

A prior meta-analysis of 5 randomized controlled trials indicates that adapalene gel 0.1% is as effective as tretinoin gel 0.025% against acne and has greater tolerability. To determine the tolerability and efficacy of adapalene gel 0.1% versus tretinoin microsphere gel 0.1% in 168 patients with acne vulgaris, we conducted a 12-week, multicenter, randomized, controlled, investigator-masked, parallel-group design study. Efficacy variables included noninflammatory, inflammatory, and total lesion counts; global grade; and global assessment of improvement in acne severity. Skin tolerability variables included erythema, desquamation (scaling), dryness, pruritus, and stinging/burning. Our results showed that the efficacy of adapalene gel 0.1% was comparable to that of tretinoin microsphere gel, and both treatments had similar onset of action. Cutaneous tolerability was noted in both groups, with scores significantly better with adapalene gel 0.1% than with tretinoin microsphere gel 0.1%, and significantly fewer treatment-related adverse events were reported with adapalene gel 0.1%.

Acne Vulgaris↗
PubMed2000

Controlling beta-sheet assembly in genetically engineered silk by enzymatic phosphorylation/dephosphorylation.

Enzymatic phosphorylation and dephosphorylation reactions were used to modify a genetically engineered variant of spider dragline silk. The approximately 25 kDa protein was phosphorylated with cyclic AMP-dependent kinase and dephosphorylated with calf intestinal alkaline phosphatase. Phosphorylation inhibited beta-sheet assembly of the protein and enhanced solubility to about 5 mg/mL in water, compared to about 20% of this level upon enzymatic dephosphorylation. The cyclability of the phosphorylation-dephosphorylation system was confirmed by MALDI with a model peptide. Kinetic studies conducted with [gamma-(32)P]ATP illustrate that the phosphorylation reaction proceeds over 6 h. Secondary structure of the phosphorylated and dephosphorylated proteins was determined by CD and FTIR. The results illustrate that an enzymatic phosphorylation event can be used to control the solution structure of a protein like silk, which has a tendency to prematurely precipitate due to the formation of beta-sheets.

Amino Acid Sequence↗
PubMed2000

The 3'-tail of a forked-duplex sterically determines whether one or two DNA strands pass through the central channel of a replication-fork helicase.

DnaB helicase is a ring-shaped hexamer that unwinds DNA at a replication fork. To understand how this protein interacts with DNA during unwinding, DnaB from Thermus aquaticus was incubated with chemically modified forked-duplex DNA substrates and the unwinding rates were measured. Unwinding was inhibited by modifications made to the 5'-tail, but not the 3'-tail, suggesting that the helicase interacts with the 5'-tail but not the 3'-tail during unwinding. Using oligonucleotides of mixed polarity, it was confirmed that DnaB translocates in the 5' to 3' direction as it unwinds DNA. A substrate was synthesized that contained two duplexes in tandem. Experiments involving various modifications of this tandem duplex demonstrated that when the 3'-tail is short, two stands of DNA pass through the central channel of DnaB with no resultant unwinding. Thus, the role of the 3'-tail in stimulating unwinding has been elucidated. The 3'-tail does not bind to DnaB during unwinding, but sterically determines whether one or two DNA strands pass through the central channel of DnaB. Furthermore, a new substrate for DnaB locomotion has been discovered. DnaB may actively translocate in the 5' to 3' direction along single-stranded DNA, even when a complementary strand is also present within the protein's central channel. This new mode of action may regulate DnaB activity by inhibiting unwinding at regions of DNA that are not forked. Furthermore, this new function for DnaB may coordinate abortion of leading and lagging strand replication if a nick is encountered on the leading strand.

Bacterial Proteins↗
PubMed2000

Sequence-specific liquid crystallinity of collagen model peptides. I. Transmission electron microscopy studies of interfacial collagen gels.

The conformation, crystal structure and self-assembly behavior of three peptides with collagen-like repetitive sequences [(1) peptide GAPGPP: (Glu)(5)(Gly-Ala-Pro-Gly-Pro-Pro)(6)(Glu)(5); (2) peptide GVPGPP: (Glu)(5)(Gly-Val-Pro-Gly-Pro-Pro)(6)(Glu)(5); and (3) peptide GAPGPA: (Glu)(5)(Gly-Ala-Pro-Gly-Pro-Ala)(6)(Glu)(5)] were compared. The peptides were characterized using transmission electron microscopy, electron diffraction, environmental scanning electron microscopy, and Fourier transform ir spectroscopy in order to determine how the molecular geometry dictated by each sequence affects the spontaneous generation of long-range ordered structures. Samples of each peptide, at ambient temperature and at 5 degrees C, were examined as films dried from aqueous solution, air-water interfacial films, and chloroform-water interfacial films. Peptide GAPGPP prepared at 5 degrees C and dried from bulk solution was found to have a collagen-like triple-helical structure. A sinusoidally textured gel, suggestive of cholesteric behavior was observed for peptides GAPGPP and GVPGPP at the aqueous chloroform interface at 5 degrees C. Peptide GAPGPA also formed a gel, but less reproducibly and the sinusoidal texture was not as well defined. The periodicities of the sinusoidal textures were reproducibly 10 microm for peptide GAPGPP, 7 microm for peptide GVPGPP, and 6 microm for peptide GAPGPA. The differences in the periodicity of the banded structure and in the crystallization behavior of the three peptides is attributed to differences in the symmetry of the preferred packing arrangement for each peptide, as evidenced by electron diffraction from crystallites that coexist with the sinusoidal gel. These differences are believed to be a measure of the effective symmetry and shape of the molecular cross section.

Amino Acid Sequence↗
PubMed2000

Molecular biology of spider silk.

Spider silks are an intriguing family of fibrous proteins due to their highly repetitive primary sequence, their solution properties and their assembly and processing into fibers with remarkable mechanical properties. Current research efforts aimed at understanding and manipulating genes encoding these proteins are helping to gain insight into the relationships between protein sequence, protein assembly and macromolecular properties.

Animals↗
PubMed2000

Enzyme-mediated free radical polymerization of styrene.

Horseradish peroxidase-mediated polymerization of styrene at ambient temperature is reported. Molecular weight and yield of polystyrene were influenced by solvent, concentration of hydrogen peroxide, and initiator (beta-diketones, coumarin). THF:H2O (v/v) and hydrogen peroxide (0.082 mol/L) provided maximum yield of polymer (21.2% weight conversion of styrene to polystyrene) with 2,4-pentanedione as initiator. 1,3-Cyclopentanedione and dibenzoylmethane as initiators resulted in higher yield of polymer (approximately 60%) and a higher molecular weight (Mn = 96,504, polydispersity = 2.16), respectively. This enzymatic strategy was also used for the synthesis of polymers from styrene derivatives, 4-methylstyrene and 2-vinylnaphthalene, the latter resulting in a > 90% yield of polymer. The presence of the initiators in the polymer chains is reported.

Free Radicals↗
PubMed2000

Reduction-oxidation control of beta-sheet assembly in genetically engineered silk.

Genetically engineered spider dragline silk protein was modified to incorporate methionines flanking the beta-sheet forming polyalanine regions. The methionines could be selectively chemically oxidized and reduced. This chemical change altered the bulkiness and charge of the sulfhydryl groups, and in turn, the beta-sheet forming tendencies of the polyalanine domains and solubility of the protein. The genes encoding these redesigned proteins were constructed, cloned and expressed in Escherichia coli. In the reduced state (beta-mercaptoethanol) the approximately 25 kDa protein behaved similarly to native spider dragline silk, crystallizing into beta-sheets based on diffraction analysis and appearing fibrous by TEM. The addition of the methionines into the consensus dragline silk sequence did not disrupt the normal macromolecular assembly behavior of the protein. In the oxidized state (phenacyl bromide) the protein did not form beta-sheet crystals and appeared morphologically featureless based on TEM. A reduction in beta-strand content was also observed upon oxidation based on FTIR and TEM analysis and confirmed by X-ray diffraction analysis. To further confirm changes in assembly behavior observed for the recombinant protein containing the methionines, a model peptide with the same repeat amino acid sequence was synthesized and characterized. Shifts in molecular weight, observed by MALDI, along with corresponding changes in crystallinity, by electron diffraction, agreed with the changes expected on activation and deactivation of the redox trigger. These results support the use of a redox trigger as a useful feature with which to control the assembly of beta-sheet forming proteins.

Amino Acid Sequence↗
PubMed1999

Streptavidin-based containment systems for genetically engineered microorganisms.

The use of genetically modified microorganisms for environmental remediation continues to be debated. Conditional lethal systems with tightly regulated gene expression can be used to contain released microorganisms and ameliorate some of the concerns about horizontal gene transfer. We have described streptavidin-based suicide systems to address these concerns and evaluated their function in Pseudomonas putida containing the TOL plasmid for aromatic hydrocarbon metabolism. Tight regulation of expression of a truncated streptavidin gene was required to avoid premature production of the toxic protein. Streptavidin expression was induced by the absence of 3-methyl benzoate (hydrocarbon substrate) which resulted in the elimination of 99.9% of the bacterial culture within eight hours. Low mutant escape rates at 10(-7) per cell per generation were also realized.

Bacteria↗