Biomedical subjects

D L Cochran

Publications and source records attributed to D L Cochran.

At least 55 records · Page 3Linked to original sources

PubMed2000

Maturation state determines the response of osteogenic cells to surface roughness and 1,25-dihydroxyvitamin D3.

In this study we assessed whether osteogenic cells respond in a differential manner to changes in surface roughness depending on their maturation state. Previous studies using MG63 osteoblast-like cells, hypothesized to be at a relatively immature maturation state, showed that proliferation was inhibited and differentiation (osteocalcin production) was stimulated by culture on titanium (Ti) surfaces of increasing roughness. This effect was further enhanced by 1,25-dihydroxyvitamin D3 [1,25(OH)2D3]. In the present study, we examined the response of three additional cell lines at three different maturation states: fetal rat calvarial (FRC) cells (a mixture of multipotent mesenchymal cells, osteoprogenitor cells, and early committed osteoblasts), OCT-1 cells (well-differentiated secretory osteoblast-like cells isolated from calvaria), and MLO-Y4 cells (osteocyte-like cells). Both OCT-1 and MLO-Y4 cells were derived from transgenic mice transformed with the SV40 large T-antigen driven by the osteocalcin promoter. Cells were cultured on Ti disks with three different average surface roughnesses (Ra): PT, 0.5 microm; SLA, 4.1 microm; and TPS, 4.9 microm. When cultures reached confluence on plastic, vehicle or 10(-7) M or 10(-8) M 1,25(OH)2D3 was added for 24 h to all of the cultures. At harvest, cell number, alkaline phosphatase-specific activity, and production of osteocalcin, transforming growth factor beta1 (TGF-beta1) and prostaglandin E2 (PGE2) were measured. Cell behavior was sensitive to surface roughness and depended on the maturation state of the cell line. Fetal rat calvarial (FRC) cell number and alkaline phosphatase-specific activity were decreased, whereas production of osteocalcin, TGF-beta1, and PGE2 were increased with increasing surface roughness. Addition of 1,25(OH)2D3 to the cultures further augmented the effect of roughness for all parameters in a dose-dependent manner; only TGF-beta1 production on plastic and PT was unaffected by 1,25(OH)2D3. OCT-1 cell number and alkaline phosphatase (SLA > TPS) were decreased and production of PGE2, osteocalcin, and TGF-beta1 were increased on SLA and TPS. Response to 1,25(OH)2D3 varied with the parameter being measured. Addition of the hormone to the cultures had no effect on cell number or TGF-beta1 production on any surface, while alkaline phosphatase was stimulated on SLA and TPS; osteocalcin production was increased on all Ti surfaces but not on plastic; and PGE2 was decreased on plastic and PT, but unaffected on SLA and TPS. In MLO-Y4 cultures, cell number was decreased on SLA and TPS; alkaline phosphatase was unaffected by increasing surface roughness; and production of osteocalcin, TGF-beta1, and PGE2 were increased on SLA and TPS. Although 1,25(OH)2D3 had no effect on cell number, alkaline phosphatase, or production of TGF-beta1 or PGE2 on any surface, the production of osteocalcin was stimulated by 1,25(OH)2D3 on SLA and TPS. These results indicate that surface roughness promotes osteogenic differentiation of less mature cells, enhancing their responsiveness to 1,25(OH)2D3. As cells become more mature, they exhibit a reduced sensitivity to their substrate but even the terminally differentiated osteocyte is affected by changes in surface roughness.

Alkaline Phosphatase↗

PubMed2000

Clinical evaluation of wound healing following multiple exposures to enamel matrix protein derivative in the treatment of intrabony periodontal defects.

BACKGROUND: Multiple exposures to enamel matrix protein derivative (EMD) during periodontal therapy have been shown to be safe for the patient. The purpose of this study was to clinically determine if an altered course of wound healing would occur after multiple exposures to EMD in the treatment of intrabony defects. A secondary aim was to assess the efficacy of EMD in probing depth reduction and clinical attachment level gain. METHODS: Thirty-two systemically healthy patients (18 females, 14 males, 33 to 69 years old) who were being treated for moderate to advanced periodontal disease were selected for the study. Surgical procedures involving 2 sites were separated by at least 8 weeks, and wound healing comparisons were made between the first and second procedure. Patients were given a diary card the day of surgery, which consisted of questions concerning the presence and severity of headaches, root hypersensitivity, tooth pain, swelling, and itching. Patients were also examined at postoperative visits to clinically assess wound healing and discuss responses to the questionnaire. Soft tissue measurements were taken the day of surgery and 6 months postoperatively to ascertain probing depth reduction (PD) and gains in clinical attachment levels (CAL). RESULTS: The results revealed no clinically detectable reaction that could not be attributed to normal postoperative sequelae. There were no differences in reported symptoms between patient gender, first and second procedures, or intrabony and non-intrabony defects. Smokers were found to have a statistically significantly higher incidence of severe symptoms in root hypersensitivity, tooth pain, and swelling compared to non-smokers (n = 21). The mean probing depth reduction was 3.8 +/- 1.5 mm (2 to 9 mm), while the mean clinical attachment level gain was 2.8 +/- 1.7 mm (0 to 8 mm). CONCLUSIONS: The findings of this study demonstrate that EMD is a clinically safe product to use in the treatment of periodontal defects and that multiple uses do not have a negative impact on periodontal wound healing. In addition, a statistically significant gain in clinical attachment and reduction in probing depth were demonstrated.

Adult↗

PubMed2000

Position paper: sonic and ultrasonic scalers in periodontics. Research, Science and Therapy Committee of the American Academy of Periodontology.

Ultrasonic and sonic scalers appear to attain similar results as hand instruments for removing plaque, calculus, and endotoxin. Ultrasonic scalers used at medium power seem to produce less root surface damage than hand or sonic scalers. Due to instrument width, furcations may be more accessible using ultrasonic or sonic scalers than manual scalers. It is not clear whether root surface roughness is more or less pronounced following power-driven scalers or manual scalers. It is also unclear if root surface roughness affects long-term wound healing. Periodontal scaling and root planing includes thorough calculus removal, but complete cementum removal should not be a goal of periodontal therapy. Studies have established that endotoxin is weakly adsorbed to the root surface, and can be easily removed with light, overlapping strokes with an ultrasonic scaler. A significant disadvantage of power-driven scalers is the production of contaminated aerosols. Because ultrasonics and sonics produce aerosols, additional care is required to achieve and maintain good infection control when incorporating these instrumentation techniques into dental practice. Preliminary evidence suggests that the addition of certain antimicrobials to the lavage during ultrasonic instrumentation may be of minimal clinical benefit. However, more randomized controlled clinical trials need to be conducted over longer periods of time to better understand the long-term benefits of ultrasonic and sonic debridement.

Aerosols↗

PubMed2000

Development of an in vitro wound healing model for periodontal cells.

BACKGROUND: Periodontal wound healing and regeneration are influenced by a multitude of factors. While many in vitro investigations have compared the proliferation of periodontal ligament (PDL) cells and gingival fibroblasts (GF), there are no reports directly comparing the abilities of these 2 cell types to fill a wound site. As such, the goals of this research were: 1) to develop an in vitro model of wound healing which would allow for the investigation of the biologic basis of periodontal wound healing and regeneration and 2) to compare the rates of PDL cells and GF to fill an in vitro wound site. METHODS: Using both human PDL cells and GF confluent cultures, in vitro wounds were mechanically created, removing a 3 mm wide band of the cell layer. Wounded cultures were then incubated for time periods up to 12 days in media containing fetal bovine serum (FBS) concentrations (0, 0.1, 1, 5, 10, and 20%) as appropriate for each experiment. Slides were fixed, stained, and cells quantified within the wound boundaries by computer-assisted histomorphometry. The effect of wounding a cell layer was determined by comparing wounded cells as described above with a cell layer margin created without physically disrupting the cell layer. RESULTS: The in vitro model for periodontal wound healing established in this study showed that GF fill in the wound site at a significantly (P <0.0025) faster rate than PDL cells over 12 days of healing. In addition, PDL cells and GF were found to have unique concentration-dependent responses to FBS (P<0.0025). It was also shown that wounding resulted in a significant delay (P <0.01) in the initial healing response of an in vitro wound. CONCLUSION: This in vitro model demonstrated that the characteristics of wound healing are dependent on cell type, disruption (wounding) of the cell layer, and serum concentration. In addition, this model has incorporated both proliferation and migration to provide the first direct evidence demonstrating GF has a significantly greater ability to fill a wound site than PDL cells. This in vitro model may be utilized in future investigations of the biologic basis of periodontal wound healing.

Analysis of Variance↗

PubMed2000

Osteoblast proliferation and differentiation on dentin slices are modulated by pretreatment of the surface with tetracycline or osteoclasts.

BACKGROUND: Implant surface roughness and chemical composition, as well as other factors, affect the ability of osteogenic cells to form bone adjacent to an implant. The same principles may also apply to the tooth root and some reports have shown that surface modification of the root may lead to improved restoration of the periodontal apparatus. The most common of these surface modification techniques involves demineralization with citric acid or treatment with tetracycline to expose collagen fibrils. In addition, during normal bone remodeling, osteoclasts demineralize the extracellular matrix, leaving resorption pits and exposed collagen fibrils. In this study, the effect of different dentin surface-preparation techniques on osteoblasts were compared. METHODS: Slices of sperm whale dentin were mechanically polished and surfaces were treated with tetracycline-HCl (TCN) or were cultured with mouse bone marrow cells to create a surface with osteoclast (OC) resorption pits or left untreated. Profilometry, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were used to evaluate the 3 different dentin surfaces. MG63 osteoblast-like cells were cultured on the 3 different surfaces and the effect of dentin surface preparation technique on MG63 cell proliferation (cell number), differentiaton (alkaline phosphatase specific activity of isolated cells and cell layer lysates; osteocalcin production), and local factor production (transforming growth factor (TGF)-beta1 and prostaglandin E2 (PGE2) compared. RESULTS: Profilometry showed the polished and TCN surfaces were smooth with comparable Ra values, whereas the OC surfaces were slightly rougher due to resorption pits which covered 3.7% of the surface. XPS measurements showed that TCN treatment reduced the Ca and P content of the surface, indicating that it had dissolved the mineral. Osteoclast-resorption also reduced the Ca and P content, but to a lesser extent. MG63 cell proliferation on polished dentin and tissue culture polystyrene was equivalent. In contrast, cells grown on the TCN- and OC-treated surfaces exhibited increased proliferation. No effect of surface treatment on cell alkaline phosphatase activity was observed, but activity in the cell layer lysates was increased on the TCN- and OC-treated surfaces. Osteocalcin production was reduced on all dentin surfaces, but the greatest reduction was found on the TCN-treated surface. Production of both TGF-beta1 and PGE2 was increased on the treated surfaces. All effects were greatest in cultures grown on the TCN-treated dentin. CONCLUSIONS: These data indicate that demineralization of the dentin surface promotes proliferation of osteoblasts and early differentiation events like production of alkaline phosphatase and autocrine mediators such as PGE2 and TGF-beta1. However, later differentiation events like osteocalcin production are decreased. Osteoclast-mediated bone resorption elicits similar responses; less than 4% of the dentin surface resulted in approximately 75% of the response caused by TCN treatment. These observations suggest that greater attention should be paid to the effects of osteoclastic resorption in designing methods for enhancing bone and cementum formation adjacent to root surfaces.

Alkaline Phosphatase↗

PubMed2000

Effects of bisphosphonate on matrix metalloproteinase enzymes in human periodontal ligament cells.

BACKGROUND: The host response is a critical component in the pathogenesis of periodontitis. In fact, the clinical benefits associated with regulating the host response have been demonstrated in studies using several different classes of drugs. Biophosphates are one host-modulating class of drugs that has demonstrated this ability. These drugs are clinically effective at reducing bone resorption and have shown the ability to inhibit host degradative enzymes, specifically the matrix metalloproteinases (MMPs). Therefore, the purpose of this study was to investigate the regulatory effects of a bisphosphonate, tiludronate, on MMP levels and activity in human periodontal cells. METHODS: MMP-1 and MMP-3 were assessed in cultured human periodontal ligament cells treated with a bisphosphonate, tiludronate. Reverse transcription-polymerase chain reaction was used to identify mRNA levels for both enzymes, and also for tissue inhibitors (TIMP-1). Enzyme immunoassay (EIA) and immunocytochemistry were used to assess MMP proteins in these cell cultures. Enzyme activity was assessed using FITC-conjugated substrates and quantitated using spectrophotofluorometry. RESULTS: Tiludronate significantly inhibited both MMP-1 and MMP-3 activity in a concentration-dependent manner. A maximal reduction in activity of 35% was achieved for each of the enzymes at a 10(-4) M concentration. Tiludronate did not have a significant effect on the mRNA levels for MMP-1, MMP-3, or TIMP-1. Similarly, there were no effects noted for either MMP-1 or MMP-3 on the protein level. CONCLUSIONS: This study demonstrates an inhibitory effect of tiludronate on the activity of both MMP-1 and MMP-3. These effects appear to occur without altering either mRNA or protein levels for these enzymes, supporting a possible mechanism of action that involves the ability of bisphosphonates to chelate cations from the MMPs. Furthermore, these results support the continued investigation of these drugs as potential therapeutic agents in periodontal disease.

Analysis of Variance↗

PubMed2000

Evaluation of recombinant human bone morphogenetic protein-2 in oral applications including the use of endosseous implants: 3-year results of a pilot study in humans.

BACKGROUND: This study evaluated patients who had been treated with recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded in an absorbable collagen sponge (ACS) in human extraction sites or in sites that required alveolar ridge augmentation. An earlier report on the same patients revealed that after 4 months, implantation of rhBMP-2/ACS was safe, as determined by clinical, radiographic, systemic, and immunological analyses. In this longer-term follow-up, eligible patients were restored with endosseous dental implants in the area treated with rhBMP-2/ACS and bone biopsy samples were taken for histological analysis of the treated human bone tissue. The primary objective was to monitor the long-term safety of patients treated with rhBMP-2/ACS. Another objective was to evaluate the dental implants placed in the sites treated with rhBMP-2. METHODS: Patient safety was evaluated by clinical examinations, periapical radiographs, and occurrence of adverse experiences. Dental implants were evaluated by radiographic and clinical examination. All 12 patients have been followed for 3 years. RESULTS: Two years following surgical implantation of rhBMP-2/ACS, no serious or unexpected adverse experiences occurred. The adverse experiences that did occur were mostly benign and compatible with the dental implant surgeries performed in these patients. No adverse experiences were deemed as related to the rhBMP-2/ACS. Furthermore, no safety concerns in the local area of rhBMP-2/ACS placement were noted, based on oral wound examinations. In the 10 patients (6 extraction socket patients and 4 augmentation patients) who received endosseous implants, all implants were clinically stable at all assessments and all 10 patients have been functionally restored. Histological evaluation of the human bone core biopsies revealed normal bone tissue formation identical to the surrounding native bone. Three-year follow-up clinical examinations revealed that all implants had stable marginal bone levels and healthy peri-implant tissues. CONCLUSIONS: These 3-year results demonstrate that rhBMP-2/ACS can be used safely in human patients. Human bone biopsies reveal normal bone formation in areas treated with rhBMP-2/ACS. Endosseous implants placed in these areas were all stable with no radiographic or clinical complications. The results from this study suggest that rhBMP-2/ACS (0.43 mg/ml) can be safely used in tooth extraction sites and in local ridge augmentation procedures and that endosseous dental implants placed in bony areas treated with rhBMP-2/ACS are stable and can be functionally restored without complication.

Alveolar Process↗

PubMed2000

Ability of deproteinized cancellous bovine bone to induce new bone formation.

BACKGROUND: Preclinical and clinical studies indicate that deproteinized cancellous bovine bone is osteoconductive and may be osteopromotive. Previous studies using commercial preparations failed to demonstrate the presence of protein, implicating bone-mineral composition and 3-dimensional structure as reasons for clinical success; however, these studies did not examine whether osteoinductive factors might be present in close association with the mineral phase. METHODS: Deproteinized cancellous bovine bone was decalcified and any protein present released by chaotropic solvents using the protocol described for purification of bone morphogenetic proteins (BMPs). Three extracts were obtained and tested for their ability to support osteoinduction in the calf muscle of nude mice. RESULTS: Protein content averaged 11 microg/g based on absorbance at 280 nm using bovine serum albumin as a standard. All extracts contained material that stained positively with silver stain after sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Western blots of these gels indicated the presence of transforming growth factor-beta (TGF-beta) and BMP-2. All 3 extracts were osteoinductive in the nude mouse model when combined with inactive DFDBA, and bone formation was comparable to that induced by active DFDBA. Deproteinized cancellous bovine bone by itself was not osteoinductive in the nude mouse, but in a clinical case, exhibited osteoclastic resorption with adjacent new bone formation. CONCLUSIONS: The results suggest that small amounts of protein are present in deproteinized cancellous bovine bone in close association with the mineral phase. Some of the extracted material has osteoinductive potential and may contain growth factors. This may explain the osteopromotive ability of deproteinized cancellous bovine bone clinically.

Adult↗

PubMed2000

In vitro wound healing responses to enamel matrix derivative.

BACKGROUND: Enamel matrix derivative (EMD) contains a variety of hydrophobic enamel matrix proteins and is extracted from developing embryonal enamel of porcine origin. EMD has been associated with the formation of acellular cementum and it has been found to stimulate periodontal regeneration. The present study was established to investigate the influence of EMD on human periodontal ligament (PDL) cells, gingival fibroblasts (GF), and osteosarcoma (MG-63) cells on wound-fill rates using an in vitro wound model. METHODS: Wounds were created by making 3 mm incisions in cell monolayers across the length of tissue culture plates. The wounded PDL, GF, and MG-63 cell monolayers were treated with media containing EMD over a concentration range of 5 to 100 microg/ml, platelet-derived growth factor (PDGF-BB) at 20 ng/ml as a positive control and insulin-like growth factor (IGF-I) at 100 ng/ml as a negative control. PDL cell wounded monolayers also were treated in EMD coated tissue culture plates. After an incubation period (up to 9 days), the cells were fixed and stained and cellular fill was measured across the width of the wound by computer-assisted histomorphometry. RESULTS: When PDL, GF, and MG-63 cells were exposed to EMD in culture medium, an enhanced wound-fill was observed for all cells compared to untreated conditions. At early time points, PDL wound-fill rates in the presence of EMD were statistically greater than the rates of GF and MG-63 treated with EMD (P<0.001). There were no significant differences in wound-fill rates of PDL cells treated with EMD in medium versus EMD coated on culture plates. At days 3 and 6 post-wounding, PDL cells showed a significantly greater response to EMD than to PDGF-BB (P <0.001). EMD also had a greater effect on GF wound-fill rates than PDGF-BB at days 6 and 9. MG-63 cells were less responsive to PDGF-BB and EMD than PDL cells and GF. All 3 cell types treated with IGF-I showed no significant increase of wound-fill rates. CONCLUSION: The present data support the concept that clinical application of enamel matrix derivative may enhance periodontal wound regeneration by specifically modifying periodontal ligament cell proliferation and migration.

Adolescent↗

PubMed2000

Porcine fetal enamel matrix derivative enhances bone formation induced by demineralized freeze dried bone allograft in vivo.

BACKGROUND: Embryonic enamel matrix proteins are involved in the formation of acellular cementum during development of the periodontal attachment apparatus, suggesting that these proteins might be used clinically to promote periodontal regeneration. At present, it is unknown if these proteins are osteoinductive, osteoconductive, or osteopromotive. To address this question, we examined the ability of a commercially prepared embryonic porcine enamel matrix derivative to induce new bone formation in nude mouse calf muscle, or to enhance the bone induction ability of a demineralized freeze-dried bone allograft (DFDBA). METHODS: Porcine fetal enamel matrix derivative (EMD) was implanted bilaterally in the calf muscle of 4 male Nu/Nu mice per treatment group (N = 8 implants): 2 mg EMD alone; 4 mg EMD alone; inactive human DFDBA alone; inactive DFDBA + 2 mg EMD; inactive DFDBA + 4 mg EMD; active DFDBA alone; active DFDBA + 2 mg EMD; and active DFDBA + 4 mg EMD. Implants were harvested after 56 days and examined histologically for bone induction using a semi-quantitative score and histomorphometrically for area of new bone, cortical bone, bone marrow, and residual DFDBA. RESULTS: Implants containing inactive DFDBA, 2 mg EMD, 4 mg EMD, and inactive DFDBA + 2 or 4 mg EMD did not induce new bone. Active DFDBA and active DFDBA + 2 mg EMD induced new bone to a similar extent. In contrast, active DFDBA + 4 mg EMD resulted in enhanced bone induction, area of new bone, and cortical bone. Residual DFDBA was also increased in this group. CONCLUSIONS: EMD is not osteoinductive. However, it is osteopromotive, due in part to its osteoconductive properties, but a threshold concentration is required.

Animals↗

PubMed2000

Porcine fetal enamel matrix derivative stimulates proliferation but not differentiation of pre-osteoblastic 2T9 cells, inhibits proliferation and stimulates differentiation of osteoblast-like MG63 cells, and increases proliferation and differentiation of normal human osteoblast NHOst cells.

BACKGROUND: Embryonic enamel matrix proteins are hypothesized to be involved in the formation of acellular cementum during tooth development, suggesting that these proteins can be used to regenerate periodontal tissues. Enamel matrix protein derived from embryonic porcine tooth germs is used clinically, but the mechanisms by which it promotes the formation of cementum, periodontal ligament, and bone are not well understood. METHODS: This study examined the response of osteoblasts at 3 stages of osteogenic maturation to porcine fetal enamel matrix derivative (EMD). Proliferation (cell number and [3H]-thymidine incorporation), differentiation (alkaline phosphatase and osteocalcin), matrix synthesis ([35S]-sulfate incorporation; percentage of collagen production), and local factor production (prostaglandin E2 [PGE2] and transforming growth factor-beta 1 [TGF-beta1]) were measured in cultures of 2T9 cells (pre-osteoblasts which exhibit osteogenesis in response to bone morphogenetic protein-2 [BMP-2]), MG63 human osteoblast-like osteosarcoma cells, and normal human osteoblasts (NHOst cells). RESULTS: EMD regulated osteoblast proliferation and differentiation, but the effects were cell-specific. In 2T9 cell cultures, EMD increased proliferation but had no effect on alkaline phosphatase-specific activity. EMD decreased proliferation of MG63 cells and increased cellular alkaline phosphatase and osteocalcin production. There was no effect on collagen synthesis, proteoglycan sulfation, or PGE2 production; however, TGF-beta1 content of the conditioned media was increased. There was a 60-fold increase in cell number in third passage NHOst cells cultured for 35 days in the presence of EMD. EMD also caused a biphasic increase in alkaline phosphatase that was maximal at day 14. CONCLUSIONS: EMD affects early states of osteoblastic maturation by stimulating proliferation, but as cells mature in the lineage, EMD enhances differentiation.

Alkaline Phosphatase↗

PubMed2000

Crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged and submerged implants in the canine mandible.

BACKGROUND: Today, implants are placed using both non-submerged and submerged approaches, and in 1- and 2-piece configurations. Previous work has demonstrated that peri-implant crestal bone reactions differ radiographically under such conditions and are dependent on a rough/smooth implant border in 1-piece implants and on the location of the interface (microgap) between the implant and abutment/restoration in 2-piece configurations. The purpose of this investigation was to examine histometrically crestal bone changes around unloaded non-submerged and submerged 1- and 2-piece titanium implants in a side-by-side comparison. METHODS: A total of 59 titanium implants were randomly placed in edentulous mandibular areas of 5 foxhounds, forming 6 different implant subgroups (types A-F). In general, all implants had a relatively smooth, machined coronal portion as well as a rough, sandblasted and acid-etched (SLA) apical portion. Implant types A-C were placed in a non-submerged approach, while types D-F were inserted in a submerged fashion. Type A and B implants were 1-piece implants with the rough/smooth border (r/s) at the alveolar crest (type A) or 1.0 mm below (type B). Type C implants had an abutment placed at the time of surgery with the interface located at the bone crest level. In the submerged group, types D-F, the interface was located either at the bone crest level (type D), 1 mm above (type E), or 1 mm below (type F). Three months after implant placement, abutment connection was performed in the submerged implant groups. At 6 months, all animals were sacrificed. Non-decalcified histology was analyzed by evaluating peri-implant crestal bone levels. RESULTS: For types A and B, mean crestal bone levels were located adjacent (within 0.20 mm) to the rough/smooth border (r/s). For type C implants, the mean distance (+/- standard deviation) between the interface and the crestal bone level was 1.68 mm (+/- 0.19 mm) with an r/s border to first bone-to-implant contact (fBIC) of 0.39 mm (+/- 0.23 mm); for type D, 1.57 mm (+/- 0.22 mm) with an r/s border to fBIC of 0.28 mm (+/- 0.21 mm); for type E, 2.64 mm (+/- 0.24 mm) with an r/s border to fBIC of 0.06 mm (+/- 0.27 mm); and for type F, 1.25 mm (+/- 0.40 mm) with an r/s border to fBIC of 0.89 mm (+/- 0.41 mm). CONCLUSIONS: The location of a rough/smooth border on the surface of non-submerged 1-piece implants placed at the bone crest level or 1 mm below, respectively, determines the level of the fBIC. In all 2-piece implants, however, the location of the interface (microgap), when located at or below the alveolar crest, determines the amount of crestal bone resorption. If the same interface is located 1 mm coronal to the alveolar crest, the fBIC is located at the r/s border. These findings, as evaluated by non-decalcified histology under unloaded conditions, demonstrate that crestal bone changes occur during the early phase of healing after implant placement. Furthermore, these changes are dependent on the surface characteristics of the implant and the presence/absence as well as the location of an interface (microgap). Crestal bone changes were not dependent on the surgical technique (submerged or non-submerged).

Alveolar Bone Loss↗

PubMed1999

Interface shear strength of titanium implants with a sandblasted and acid-etched surface: a biomechanical study in the maxilla of miniature pigs.

The purpose of the present study was to evaluate the interface shear strength of unloaded titanium implants with a sandblasted and acid-etched (SLA) surface in the maxilla of miniature pigs. The two best documented surfaces in implant dentistry, the machined and the titanium plasma-sprayed (TPS) surfaces served as controls. After 4, 8, and 12 weeks of healing, removal torque testing was performed to evaluate the interface shear strength of each implant type. The results revealed statistically significant differences between the machined and the two rough titanium surfaces (p <.00001). The machined surface demonstrated mean removal torque values (RTV) between 0.13 and 0.26 Nm, whereas the RTV of the two rough surfaces ranged between 1.14 and 1.56 Nm. At 4 weeks of healing, the SLA implants yielded a higher mean RTV than the TPS implants (1.39 vs. 1. 14 Nm) without reaching statistical significance. At 8 and 12 weeks of healing, the two rough surfaces showed similar mean RTVs. The implant position also had a significant influence on removal torques for each implant type primarily owing to differences in density in the periimplant bone structure. It can be concluded that the interface shear strength of titanium implants is significantly influenced by their surface characteristics, since the machined titanium surface demonstrated significantly lower RTV in the maxilla of miniature pigs compared with the TPS and SLA surfaces.

Animals↗

PubMed1999

Surface roughness modulates the response of MG63 osteoblast-like cells to 1,25-(OH)(2)D(3) through regulation of phospholipase A(2) activity and activation of protein kinase A.

Implant surface roughness influences osteoblast proliferation, differentiation, and local factor production. Moreover, the responsiveness of osteoblasts to systemic hormones such as 1, 25-(OH)(2)D(3) is altered by the effects of surface roughness; on the roughest Ti surfaces the effects of roughness and 1, 25-(OH)(2)D(3) are synergistic. Prostaglandin E(2) (PGE(2)) appears to be involved in mediating the effects of surface roughness on the cells, as well as in the response to 1,25-(OH)(2)D(3). However, it is not yet known through which signaling pathways surface roughness exerts its effects on the response of osteoblasts to 1, 25-(OH)(2)D(3). The present study examined the potential role of protein kinase A (PKA), phospholipase A(2)(PLA(2)), and protein kinase C (PKC) in this process. MG63 osteoblast-like human osteosarcoma cells were cultured on cpTi disks with R(a) values of 0. 54 microm (PT), 4.14 microm (SLA), or 4.92 microm (TPS). PKA was inhibited by adding H8 to the cultures; similarly, PLA(2) was inhibited with quinacrine or activated with melittin, and PKC was inhibited with chelerythrine. Inhibitors or activators were included in the culture media through the entire culture period or for the last 24 h of culture. In addition, cultures were treated for 24 h with inhibitors or activators in the presence of 1,25-(OH)(2)D(3). The effects on cell number and alkaline phosphatase specific activity were determined after 24 h; PKC activity was determined after 9 min and at 24 h. Cell number was reduced on rough surfaces, and alkaline phosphatase activity was increased. 1,25-(OH)(2)D(3) had a synergistic effect with surface roughness on alkaline phosphatase. However, neither surface roughness nor 1,25-(OH)(2)D(3) had an effect on PKC. H8 treatment for 24 h inhibited cell number and alkaline phosphatase on all surfaces; however, when it was present throughout the culture period, the PKA inhibitor had no effect on cell number, but decreased alkaline phosphatase-specific activity. H8 reduced the 1,25-(OH)(2)D(3)-mediated effect on cell number and alkaline phosphatase. Quinacrine inhibited cell proliferation and alkaline phosphatase on all surfaces and further reduced the 1,25-(OH)(2)D(3)-dependent decreases in both parameters. Melittin had no effect when applied for 24 h and did not modify the 1,25-(OH)(2)D(3) effect; however, when present throughout the culture period, it caused a decrease in proliferation and an increase in enzyme activity. Chelerythrine, the PKC inhibitor, only inhibited cell proliferation when it was present throughout the entire culture period. However, it decreased alkaline phosphatase in cultures treated for 24 h, but increased enzyme activity when it was present for the entire culture period. The results indicate that surface roughness and 1,25-(OH)(2)D(3) both mediate their effects through PLA(2) which catalyzes the rate-limiting step in PGE(2) production. Further downstream, PGE(2) activates PKA. Surface roughness-dependent effects are also mediated through PKC, but only after the cells have reached confluence and are undergoing phenotypic maturation. The effect of surface roughness on responsiveness to 1,25-(OH)(2)D(3) is mediated through PLA(2)/PKA and not through PKC.

Bioprosthesis↗

PubMed1999

Effect of surface roughness and composition on costochondral chondrocytes is dependent on cell maturation state.

During endochondral bone formation, as occurs in fracture healing, chondrocytes are one of the first cells to see an implant surface. We tested the hypothesis that chemical composition and surface roughness affect chondrocyte differentiation, matrix synthesis, and local factor production and that the nature of the response is dependent on the state of maturation of the cells. To do this, we harvested rat growth zone and resting zone chondrocytes and examined their response to smooth and rough disk surfaces manufactured from either commercially pure titanium or titanium alloy. Profilometry, scanning electron microscopy, Auger spectroscopy, and Fourier transform infrared spectroscopy were used to characterize the surfaces. Average roughness values were 0.22 microm for smooth titanium surfaces, 0.23 microm for smooth titanium alloy surfaces, 4.24 microm for rough titanium surfaces, and 3.20 microm for rough titanium alloy surfaces. Cells were grown on the different disk surfaces until the cultures had reached confluence on plastic. The effect of the surfaces was determined by assaying cell number and [3H]thymidine incorporation as measures of cell proliferation, cell layer and cell alkaline phosphatase specific activity as markers of differentiation, and collagen production and [35S]sulfate incorporation as indicators of extracellular matrix production. In addition, the synthesis of prostaglandin E2 and transforming growth factor-beta were examined to measure changes in local factor synthesis. In growth zone and resting zone cultures, cell number and [3H]thymidine incorporation were decreased on rough surfaces; however, this effect was greater on commercially pure titanium surfaces. Cell layer and cell alkaline phosphatase specific activity were decreased in resting zone cells grown on rough surfaces. Cell alkaline phosphatase specific activity in growth zone cells was decreased on rough surfaces, whereas cell layer alkaline phosphatase specific activity was increased only in growth zone cells grown on rough commercially pure titanium surfaces. Resting zone cell collagen production was decreased only on rough commercially pure titanium, whereas in growth zone cells, collagen production was increased. Increased prostaglandin E2 release into the media was found for growth zone and resting zone cell cultures on the disks with rough surfaces. The observed effect was greater on rough commercially pure titanium. Production of transforming growth factor-beta by resting zones was similarly affected, whereas an increase in its production by growth zone cells was measured only on rough commercially pure titanium. These results indicate that surface roughness affects chondrocyte proliferation, differentiation, matrix synthesis, and local factor production and that these parameters are also affected by chemical composition. Furthermore, the nature and extent of the cell response is dependent on cell maturation. The overriding variable in response to an implant material, however, appears to be roughness of the surface.

Alloys↗

PubMed1999

Surface roughness mediates its effects on osteoblasts via protein kinase A and phospholipase A2.

Earlier studies have shown that implant surface roughness influences osteoblast proliferation, differentiation, matrix synthesis and local factor production. Moreover, the responsiveness of osteoblasts to systemic hormones, such as 1,25-(OH)2D3, at the implant surface is also influenced by surface roughness and this effect is mediated by changes in prostaglandins. At present, it is not known which signaling pathways are involved in mediating cell response to surface roughness and how 1,25-(OH)2D3 treatment alters the activation of these pathways. This paper reviews a series of studies that have addressed this question. MG63 osteoblast-like cells were cultured on commercially pure titanium (cpTi) surfaces of two different roughnesses (Ra 0.54 and 4.92 microm) in the presence of control media or media containing 1,25-(OH)2D3 or 1,25-(OH)2D3 plus H8 (a protein kinase A inhibitor) or quinacrine (a phospholipase A2 inhibitor). At harvest, the effect of these treatments on cell number and alkaline phosphatase specific activity was measured. Compared to cultures grown on the smooth surface, cell number was reduced on the rough surface. 1,25-(OH)2D3 inhibited cell number on both surfaces and inhibition of protein kinase A in the presence of 1,25-(OH)2D3 restored cell number to that seen in the control cultures. Inhibition of phospholipase A2 in the presence of 1,25-(OH)2D3 caused a further reduction in cell number on the smooth surface, and partially reversed the inhibitory effects of 1,25-(OH)2D3 on the rough surface. Alkaline phosphatase specific activity was increased in cultures grown on the rough surface compared with those grown on the smooth surface; 1,25-(OH)2D3 treatment increased enzyme specific activity on both surfaces. Cultures treated with H8 and 1,25-(OH)2D3 displayed enzyme specific activity that approximated that seen in control cultures. Inhibition of phospholipase A2 also inhibited the 1,25-(OH)2D3-dependent effect on the smooth surface, but on the rough surface there was an inhibition of the 1,25-(OH)2D3 effect as well as a partial inhibition of the surface roughness-dependent effect. The results indicate that surface roughness and 1,25-(OH)2 D3 mediate their effects through phospholipase A2, which catalyzes one of the rate-limiting steps in prostaglandin E2 production. Further downstream, prostaglandin E2 activates protein kinase A.

Alkaline Phosphatase↗

PubMed1999

Clinical evaluation of Bio-Oss: a bovine-derived xenograft for the treatment of periodontal osseous defects in humans.

The purpose of this study was to compare the bovine derived xenograft (BDX) Bio-Oss to demineralized freeze dried bone allograft (DFDBA) in human intrabony defects. 17 healthy patients with no systemic disease with moderate-severe periodontitis (7 males, 10 females; aged 34-67), were treated. Surgically, defects were included only if the intraosseous defect depth was >3.0 mm. Final selection included 30 defects. The sites were randomly assigned treatment with DFDBA or BDX. Soft tissue and osseous defect measurements were taken the day of surgery and 6 months post-operatively at re-entry. Average baseline PD, CAL, and surgical defect depth for the DFDBA group were not statistically different from the BDX group. No adverse healing response occurred. The results showed a statistically significant improvement in PD and AL for both materials at 6 months in 26 defects (4 defects did not respond to therapy). Soft tissue measurements for the DFDBA group included PD reduction of 2.0+/-1.3 mm, and AL gain of 2.6+/-1.6 mm, while the BDX group showed a PD reduction of 3.0+/-1.7 mm, and AL gain of 3.6+/-1.8 mm. Osseous measurements showed bone fill of 2.4 mm (46.8%) for the DFDBA group and 3.0 mm (55.8%) for the BDX group. Defect resolution was 59.4% for the DFDBA group and 77.6% for the BDX group. Statistical analysis revealed there was no statistical difference between the 2 materials in all measurements.

Adult↗

PubMed1999

Racial differences in the multiple social roles of older women: implications for depressive symptoms.

The relationship between multiple role participation and depressive symptoms experienced by African American (n = 547) and White (n = 2,152) women aged 55-61 was explored. Data were obtained from the Health and Retirement Study (HRS). Racial differences in the social roles of marriage, employment, grandmother, care provider, and volunteer and their influence on level of depressive symptoms were examined. African Americans reported higher levels of depressive symptoms than Whites. Additionally, marriage, employment, and total number of social roles were the most powerful predictors of depressive symptoms for both African American and White women. However, employment was more important in diminishing depressive symptoms among African American than White women occupying multiple social roles.

Black or African American↗