Search PubMed⌕ Search

Biomedical subjects

D G Myszka

Publications and source records attributed to D G Myszka.

At least 19 recordsLinked to original sources

Two functionally distinct steps mediate high affinity binding of U1A protein to U1 hairpin II RNA.

Binding of the U1A protein to its RNA target U1 hairpin II has been extensively studied as a model for a high affinity RNA/protein interaction. However, the mechanism and kinetics by which this complex is formed remain largely unknown. Here we use real-time biomolecular interaction analysis to dissect the roles various protein and RNA structural elements play in the formation of the U1A.U1 hairpin II complex. We show that neutralization of positive charges on the protein or increasing the salt concentration slows the association rate, suggesting that electrostatic interactions play an important role in bringing RNA and protein together. In contrast, removal of hydrogen bonding or stacking interactions within the RNA/protein interface, or reducing the size of the RNA loop, dramatically destabilizes the complex, as seen by a strong increase in the dissociation rate. Our data support a binding mechanism consisting of a rapid initial association based on electrostatic interactions and a subsequent locking step based on close-range interactions that occur during the induced fit of RNA and protein. Remarkably, these two steps can be clearly distinguished using U1A mutants containing single amino acid substitutions. Our observations explain the extraordinary affinity of U1A for its target and may suggest a general mechanism for high affinity RNA/protein interactions.

Amino Acid Sequence↗

Covalent inhibition revealed by the crystal structure of the caspase-8/p35 complex.

Apoptosis is a highly regulated process that is crucial for normal development and homeostasis of multicellular organisms. The p35 protein from baculoviruses effectively prevents apoptosis by its broad-spectrum caspase inhibition. Here we report the crystal structure of p35 in complex with human caspase-8 at 3.0 A resolution, and biochemical and mutagenesis studies based on the structural information. The structure reveals that the caspase is inhibited in the active site through a covalent thioester linkage to p35, which we confirmed by gel electrophoresis, hydroxylamine treatment and mass spectrometry experiments. The p35 protein undergoes dramatic conformational changes on cleavage by the caspase. The repositioning of the amino terminus of p35 into the active site of the caspase eliminates solvent accessibility of the catalytic dyad. This may be crucial for preventing hydrolysis of the thioester intermediate, which is supported by the abrogation of inhibitory activity through mutations at the N terminus of p35. The p35 protein also makes conserved contacts with the caspase outside the active-site region, providing the molecular basis for the broad-spectrum inhibitory activity of this protein. We demonstrate a new molecular mechanism of caspase inhibition, as well as protease inhibition in general.

Binding Sites↗

Structural basis of caspase inhibition by XIAP: differential roles of the linker versus the BIR domain.

The inhibitor of apoptosis proteins (IAPs) represent the only endogenous caspase inhibitors and are characterized by the presence of baculoviral IAP repeats (BIRs). Here, we report the crystal structure of the complex between human caspase-7 and XIAP (BIR2 and the proceeding linker). The structure surprisingly reveals that the linker is the only contacting element for the caspase, while the BIR2 domain is invisible in the crystal. The linker interacts with and blocks the substrate groove of the caspase in a backward fashion, distinct from substrate recognition. Structural analyses suggest that the linker is the energetic and specificity determinant of the interaction. Further biochemical characterizations clearly establish that the linker harbors the major energetic determinant, while the BIR2 domain serves as a regulatory element for caspase binding and Smac neutralization.

Apoptosis Regulatory Proteins↗

Binding kinetics and ligand specificity for the interactions of the C2B domain of synaptogmin II with inositol polyphosphates and phosphoinositides.

Synaptotagmin II (Syt II) is a key protein in the calcium-dependent exocytosis of synaptic vesicles. It contains two domains homologous to the C2 regulatory region of protein kinase C. The C2A domain acts as a calcium sensor, while the C2B domain has high affinity for inositol polyphosphates (InsP(n)()s) and phosphoinositide polyphosphates (PtdInsP(n)()s). We describe the use of a surface plasmon resonance biosensor in determining the binding kinetics of the C2B domain with InsP(n)() and PtdInsP(n) ligands. Biosensor surfaces were prepared with covalently attached Ins(1,4,5)P(3), Ins(1,3,4,5)P(4), and InsP(6) ligands. The interactions of bacterially expressed His(6)-tagged C2B and (C2A+C2B) domains of Syt II were examined in the presence and absence of competing InsP(n)s and PtdInsP(n)s. Both His(6)-C2B and His(6)-(C2A+C2B) exhibited the highest affinity for the Ins(1,3,4,5)P(4)-modified surface with a K(D) value of 6 nM. The His(6)-(C2A+C2B) had a 10-fold lower association rate constant for the InsP(6)-linked surface (k(a) = 4.6 x 10(3) M(-1) s(-1)) than for the Ins(1,3,4,5)P(4)-modified surface (k(a) = 6.8 x 10(4) M(-1) s(-1)). Two water-soluble phosphoinositides, dioctanoyl-PtdIns(3,4,5)P(3) and dioctanoyl-PtdIns(4,5)P(2), were superior to the soluble InsP(n)s in displacing binding to the Ins(1,3,4,5)P(4)-modified surface. The binding of His(6)-C2B and His(6)-(C2A+C2B) to InsP(n) surfaces did not show significant calcium dependence. These data support a model in which the binding of the C2B domain of Syt II to PtdInsP(n)s is important for the docking and/or fusion of the secretory vesicles to the synaptic plasma membrane.

Binding, Competitive↗

Energetics of the HIV gp120-CD4 binding reaction.

HIV infection is initiated by the selective interaction between the cellular receptor CD4 and gp120, the external envelope glycoprotein of the virus. We used analytical ultracentrifugation, titration calorimetry, and surface plasmon resonance biosensor analysis to characterize the assembly state, thermodynamics, and kinetics of the CD4-gp120 interaction. The binding thermodynamics were of unexpected magnitude; changes in enthalpy, entropy, and heat capacity greatly exceeded those described for typical protein-protein interactions. These unusual thermodynamic properties were observed with both intact gp120 and a deglycosylated and truncated form of gp120 protein that lacked hypervariable loops V1, V2, and V3 and segments of its N and C termini. Together with previous crystallographic studies, the large changes in heat capacity and entropy reveal that extensive structural rearrangements occur within the core of gp120 upon CD4 binding. CD spectral studies and slow kinetics of binding support this conclusion. These results indicate considerable conformational flexibility within gp120, which may relate to viral mechanisms for triggering infection and disguising conserved receptor-binding sites from the immune system.

Animals↗

A novel mechanism of TRAF signaling revealed by structural and functional analyses of the TRADD-TRAF2 interaction.

TRAF proteins are major mediators for the cell activation, cell survival, and antiapoptotic functions of the TNF receptor superfamily. They can be recruited to activated TNF receptors either by direct interactions with the receptors or indirectly via the adaptor protein TRADD. We now report the structure of the TRADD-TRAF2 complex, which is highly distinct from receptor-TRAF2 interactions. This interaction is significantly stronger and we show by an in vivo signaling assay that TRAF2 signaling is more readily initiated by TRADD than by direct receptor-TRAF2 interactions. TRADD is specific for TRAF1 and TRAF2, which ensures the recruitment of clAPs for the direct inhibition of caspase activation in the signaling complex. The stronger affinity and unique specificity of the TRADD-TRAF2 interaction are crucial for the suppression of apoptosis and provide a mechanistic basis for the perturbation of TRAF recruitment in sensitizing cell death induction.

Amino Acid Sequence↗

Surface plasmon resonance kinetic studies of the HIV TAR RNA kissing hairpin complex and its stabilization by 2-thiouridine modification.

Surface plasmon resonance (BIACORE) was used to determine the kinetic values for formation of the HIV TAR-TAR* ('kissing hairpin') RNA complex. The TAR component was also synthesized with the modified nucleoside 2-thiouridine at position 7 in the loop and the kinetics and equilibrium dissociation constants compared with the unmodified TAR hairpin. The BIACORE data show an equilibrium dissociation constant of 1.58 nM for the complex containing the s(2)U modified TAR hairpin, which is 8-fold lower than for the parent hairpin (12.5 nM). This is a result of a 2-fold faster k(a) (4.14x10(5) M(-1) s(-1) versus 2.1x10(5) M(-1) s(-1)) and a 4-fold slower k(d) (6.55x10(-4) s(-1) versus 2.63x10(-3) s(-1)). (1)H NMR imino spectra show that the secondary structure interactions involved in complex formation are retained in the s(2)U-modified complex. Magnesium has been reported to significantly stabilize the TAR-TAR* complex and we found that Mn(2+) and Ca(2+) are also strongly stabilizing, while Mg(2+) exhibited the greatest effect on the complex kinetics. The stabilizing effects of 2-thiouridine indicate that this base modification may be generally useful as an antisense RNA modification for oligonucleotide therapeutics which target RNA loops.

Calcium↗

Advances in surface plasmon resonance biosensor analysis.

The number and diversity of surface plasmon resonance (SPR) biosensor applications continue to increase. Evolutions in instrument and sensor chip technology, experimental methodology, and data analysis are making it possible to examine a wider variety of biomolecular interactions in greater mechanistic detail. SPR biosensors are poised to make a significant impact in basic research and pharmaceutical discovery.

Animals↗

HuD RNA recognition motifs play distinct roles in the formation of a stable complex with AU-rich RNA.

Human neuron-specific RNA-binding protein HuD belongs to the family of Hu proteins and consists of two N-terminal RNA recognition motifs (RRM1 and -2), a hinge region, and a C-terminal RRM (RRM3). Hu proteins can bind to AU-rich elements in the 3' untranslated regions of unstable mRNAs, causing the stabilization of certain transcripts. We have studied the interaction between HuD and prototype mRNA instability elements of the sequence UU(AUUU)(n)AUU using equilibrium methods and real-time kinetics (surface plasmon resonance using a BIACORE). We show that a single molecule of HuD requires at least three AUUU repeats to bind tightly to the RNA. Deletion of RRM1 reduced the K(d) by 2 orders of magnitude and caused a decrease in the association rate and a strong increase in the dissociation rate of the RNA-protein complex, as expected when a critical RNA-binding domain is removed. In contrast, deletion of either RRM2 or -3, which only moderately reduced the affinity, caused marked increases in the association and dissociation rates. The slower binding and stabilization of the complex observed in the presence of all three RRMs suggest that a change in the tertiary structure occurs during binding. The individual RRMs bind poorly to the RNA (RRM1 binds with micromolar affinity, while the affinities of RRM2 and -3 are in the millimolar range). However, the combination of RRM1 and either RRM2 or RRM3 in the context of the protein allows binding with a nanomolar affinity. Thus, the three RRMs appear to cooperate not only to increase the affinity of the interaction but also to stabilize the formed complex. Kinetic effects, similar to those described here, could play a role in RNA binding by many multi-RRM proteins and may influence the competition between proteins for RNA-binding sites and the ability of RNA-bound proteins to be transported intracellularly.

3' Untranslated Regions↗

Equilibrium analysis of high affinity interactions using BIACORE.

BIACORE biosensors are useful for measuring reaction kinetics and calculating affinity constants for macromolecular interactions. However, one drawback with the flow system used in these instruments is that the standard injection procedures limit the amount of time available to collect association-phase data. This is especially problematic during equilibrium analysis of high affinity interactions. Using protein-DNA interactions as a model system, we demonstrate a simple method for overcoming this limitation. By placing the analyte directly into the running buffer we were able to deliver a continuous supply of protein to the sensor surfaces for greater than 12 h at a time. Complete equilibrium binding profiles were generated by changing the concentration of analyte and allowing the surface reactions to reequilibrate. Analyte concentrations were also decreased to demonstrate that the binding reactions were fully reversible. This method of analysis is a simple and convenient way of directly measuring equilibrium dissociation constants for very high affinity interactions.

Base Sequence↗

Characterization of interactions between the anti-apoptotic protein BAG-1 and Hsc70 molecular chaperones.

The anti-cell death protein BAG-1 binds to 70-kDa heat shock proteins (Hsp70/Hsc70) and modulates their chaperone activity. Among other facilitory roles, BAG-1 may serve as a nucleotide exchange factor for Hsp70/Hsc70 family proteins and thus represents the first example of a eukaryotic homologue of the bacterial co-chaperone GrpE. In this study, the interactions between BAG-1 and Hsc70 are characterized and compared with the analogous GrpE-DnaK bacterial system. In contrast to GrpE, which binds DnaK as a dimer, BAG-1 binds to Hsc70 as a monomer with a 1:1 stoichiometry. Dynamic light scattering, sedimentation equilibrium, and circular dichroism measurements provided evidence that BAG-1 exists as an elongated, highly helical monomer in solution. Isothermal titration microcalorimetry was used to determine the complex stoichiometry and an equilibrium dissociation constant, KD, of 100 nM. Kinetic analysis using surface plasmon resonance yielded a KD consistent with the calorimetrically determined value. Molecular modeling permitted a comparison of structural features between the functionally homologous BAG-1 and GrpE proteins. These data were used to propose a mechanism for BAG-1 in the regulation of Hsp70/Hsc70 chaperone activity.

Amino Acid Sequence↗

Interpreting kinetic rate constants from optical biosensor data recorded on a decaying surface.

A capturing assay was used to monitor a Fab-antigen interaction using a BIACORE optical biosensor. The antigen, a truncated single-site mutant (F43V) version of the CD4 receptor, was captured onto the sensor surface using an immobilized nonneutralizing monoclonal antibody. While this assay design created an oriented antigen surface, the antigen slowly dissociated during subsequent binding of the Fab, thus complicating the binding responses. In this paper, we illustrate how binding events occurring on a decaying surface can be accurately described by globally fitting the response data to a model that accounts for the background surface decay. Support for the method was obtained by showing the equilibrium dissociation constant calculated from the kinetic rate constants (Kd = 2.20 +/- 0.01 nM) was similar to the value measured in solution using titration calorimetry (Kd = 2.6 +/- 0.5 nM). The ability to interpret rate constants from decaying surfaces significantly extends the types of experimental systems that can be quantitatively studied on optical biosensors.

Antigen-Antibody Reactions↗

Extending the range of rate constants available from BIACORE: interpreting mass transport-influenced binding data.

Surface-based binding assays are often influenced by the transport of analyte to the sensor surface. Using simulated data sets, we test a simple two-compartment model to see if its description of transport and binding is sufficient to accurately analyze BIACORE data. First we present a computer model that can generate realistic BIACORE data. This model calculates the laminar flow of analyte within the flow cell, its diffusion both perpendicular and parallel to the sensor surface, and the reversible chemical reaction between analyte and immobilized reactant. We use this computer model to generate binding data under a variety of conditions. An analysis of these data sets with the two-compartment model demonstrates that good estimates of the intrinsic reaction rate constants are recovered even when mass transport influences the binding reaction. We also discuss the conditions under which the two-compartment model can be used to determine the diffusion coefficient of the analyte. Our results illustrate that this model can significantly extend the range of association rate constants that can be accurately determined from BIACORE.

Binding Sites↗