Search PubMed⌕ Search

Biomedical subjects

D G Kilburn

Publications and source records attributed to D G Kilburn.

At least 37 records · Page 2Linked to original sources
PubMed1998

Characterization and affinity applications of cellulose-binding domains.

Cellulose-binding domains (CBDs) are discrete protein modules found in a large number of carbohydrolases and a few nonhydrolytic proteins. To date, almost 200 sequences can be classified in 13 different families with distinctly different properties. CBDs vary in size from 4 to 20 kDa and occur at different positions within the polypeptides; N-terminal, C-terminal and internal. They have a moderately high and specific affinity for insoluble or soluble cellulosics with dissociation constants in the low micromolar range. Some CBDs bind irreversibly to cellulose and can be used for applications involving immobilization, others bind reversibly and are more useful for separations and purifications. Dependent on the CBD used, desorption from the matrix can be promoted under various different conditions including denaturants (urea, high pH), water, or specific competitive ligands (e.g. cellobiose). Family I and IV CBDs bind reversibly to cellulose in contrast to family II and III CBDs which are in general, irreversibly bound. The binding of family II CBDs (CBD(Cex)) to crystalline cellulose is characterized by a large favourable increase in entropy indicating that dehydration of the sorbent and the protein are the major driving forces for binding. In contrast, binding of family IV CBDs (CBD(N1)) to amorphous or soluble cellulosics is driven by a favourable change in enthalpy which is partially offset by an unfavourable entropy change. Hydrogen bond formation and van der Waals interactions are the main driving forces for binding. CBDs with affinity for crystalline cellulose are useful tags for classical column affinity chromatography. The affinity of CBD(N1) for soluble cellulosics makes it suitable for use in large-scale aqueous two-phase affinity partitioning systems.

Binding Sites↗
PubMed1998

Stability and oligosaccharide binding of the N1 cellulose-binding domain of Cellulomonas fimi endoglucanase CenC.

Differential scanning calorimetry has been used to study the thermal stability and oligosaccharide-binding thermodynamics of the N-terminal cellulose-binding domain of Cellulomonas fimi beta-1,4-glucanase CenC (CBDN1). CBDN1 has a relatively low maximum stability (delta Gmax = 33 kJ/mol = 216 J/residue at 1 degree C and pH 6.1) compared to other small single-domain globular proteins. The unfolding is fully reversible between pH 5.5 and 9 and in accordance with the two-state equilibrium model between pH 5.5 and 11. When the single disulfide bond in CBDN1 is reduced, the protein remains unfolded at all conditions, as judged by NMR spectroscopy. This indicates that the intramolecular cross-link makes a major contribution to the stability of CBDN1. The measured heat capacity change of unfolding (delta Cp = 7.5 kJ mol-1 K-1) agrees well with that calculated from the predicted changes in the solvent accessible nonpolar and polar surface areas upon unfolding. Extrapolation of the specific enthalpy and entropy of unfolding to their respective convergence temperature indicates that per residue unfolding energies for CBDN1, an isolated domain, are in accordance with those found by Privalov (1) for many single-domain globular proteins. DSC thermograms of the unfolding of CBDN1 in the presence of various concentrations of cellopentaose were fit to a thermodynamic model describing the linkage between protein-ligand binding and protein unfolding. A global two-dimensional minimization routine is used to regress the binding enthalpy, binding constant, and unfolding thermodynamics for the CBDN1-cellopentaose system. Extrapolated binding constants are in quantitative agreement with those determined by isothermal titration calorimetry at 35 degrees C.

Binding Sites↗
PubMed1998

Analysis of molecular size distributions of cellulose molecules during hydrolysis of cellulose by recombinant Cellulomonas fimi beta-1,4-glucanases.

Four beta-1,4-glucanases (cellulases) of the cellulolytic bacterium Cellulomonas fimi were purified from Escherichia coli cells transformed with recombinant plasmids. Previous analyses using soluble substrates had suggested that CenA and CenC were endoglucanases while CbhA and CbhB resembled the exo-acting cellobiohydrolases produced by cellulolytic fungi. Analysis of molecular size distributions during cellulose hydrolysis by the individual enzymes confirmed these preliminary findings and provided further evidence that endoglucanase CenC has a more processive hydrolytic activity than CenA. The significant differences between the size distributions obtained during hydrolysis of bacterial microcrystalline cellulose and acid-swollen cellulose can be explained in terms of the accessibility of beta-1,4-glucan chains to enzyme attack. Endoglucanases and cellobiohydrolases were much more easily distinguished when the acid-swollen substrate was used.

Actinomycetales↗
PubMed1997

Surface diffusion of cellulases and their isolated binding domains on cellulose.

The surface diffusion rate of bacterial cellulases from Cellulomonas fimi on cellulose was quantified using fluorescence recovery after photobleaching analysis. Studies were performed on an exo-beta-1-4-glycanase (Cex), an endo-beta-1-4-glucanase (CenA), and their respective isolated cellulose-binding domains (CBDs). Although these cellulose-binding domains bind irreversibly to microcrystalline cellulose, greater than 70% of bound molecules are mobile on the cellulose surface. Surface diffusion rates are dependent on surface coverage and range from a low of 2 x 10(-11) to a maximum of 1.2 x 10(-10) cm2/s. The fraction of mobile molecules increases only slightly with increasing fractional surface coverage density. Results demonstrate that the packing of C. fimi cellulases and their isolated binding domains onto the cellulose surface is a dynamic process. This suggests that the exclusion of potential CBD binding sites on the cellulose due to steric effects of neighboring bound CBDs may not fully explain the apparent negative cooperativity exhibited in CBD adsorption isotherms. Comparison with the kinetics of cellulase hydrolysis of crystalline substrate suggests that surface diffusion rates do not limit cellulase activity.

Cellulase↗
PubMed1996

Structure of the N-terminal cellulose-binding domain of Cellulomonas fimi CenC determined by nuclear magnetic resonance spectroscopy.

Multidimensional heteronuclear nuclear magnetic resonance (NMR) spectroscopy was used to determine the tertiary structure of the 152 amino acid N-terminal cellulose-binding domain from Cellulomonas fimi 1,4-beta-glucanase CenC (CBDN1). CBDN1 was studied in the presence of saturating concentrations of cellotetraose, but due to spectral overlap, the oligosaccharide was not included in the structure calculations. A total of 1705 interproton nuclear Overhauser effect (NOE), 56 phi, 88 psi, 42 chi 1, 9 chi 2 dihedral angle, and 88 hydrogen-bond restraints were used to calculate 25 final structures. These structures have a rmsd from the average of 0.79 +/- 0.11 A for all backbone atoms excluding disordered termini and 0.44 +/- 0.05 A for residues with regular secondary structures. CBDN1 is composed of 10 beta-strands, folded into two antiparallel beta-sheets with the topology of a jelly-roll beta-sandwich. The strands forming the face of the protein previously determined by chemical shift perturbations to be responsible for cellooligosaccharide binding [Johnson, P. E., Tomme, P., Joshi, M. D., & McIntosh, L. P. (1996) Biochemistry 35, 13895-13906] are shorter than those forming the opposite side of the protein. This results in a 5-stranded binding cleft, containing a central strip of hydrophobic residues that is flanked on both sides by polar hydrogen-bonding groups. The presence of this cleft provides a structural explanation for the unique selectivity of CBDN1 for amorphous cellulose and other soluble oligosaccharides and the lack of binding to crystalline cellulose. The tertiary structure of CBDN1 is strikingly similar to that of the bacterial 1,3-1,4-beta-glucanases, as well as other sugar-binding proteins with jelly-roll folds.

Actinomycetales↗
PubMed1996

Interaction of polysaccharides with the N-terminal cellulose-binding domain of Cellulomonas fimi CenC. 1. Binding specificity and calorimetric analysis.

The carbohydrate-binding specificity of the N-terminal cellulose-binding domain (CBDN1) from Cellulomonas fimi beta-1,4-glucanase C (CenC) was investigated using affinity electrophoresis, binding assays and microcalorimetry in parallel with NMR and difference ultraviolet absorbance spectroscopy [Johnson, P.E., Tomme, P., Joshi, M.D., & McIntosh, I., P. (1996) Biochemistry 35, 13895-13906]. Binding of CBDN1 on insoluble cellulose is distinctly different from other cellulose-binding domains. CBDN1 binds amorphous cellulose (phosphoric acid-swollen) with high affinity (Kr = 5.1 L g-1), binds Avicel weakly and does not bind highly crystalline bacterial or tunicin cellulose. Moreover, CBDN1 binds soluble cellooligosaccharides and beta-1,4-linked oligomers of glucose such as hydroxyethycellulose, soluble beta-1,3-1,4-glucans from barley and oat, but has no affinity for alpha-1,4-, beta-1,3-, or beta-1,6-polymers of glucose. This is the first report of a cellulose-binding domain with strong and specific affinity for soluble glycans. The thermodynamics for binding of CBDN1 to oligosaccharides, soluble glycans, and phosphoric acid-swollen cellulose were investigated by titration microcalorimetry. At least four beta-1,4-linked glucopyranosides are required to detect binding. For larger glucans, with five or more glucopyranoside units, the binding constants and standard free energy changes are virtually independent of the glucan chain length, indicating that cellopentaose completely fills the binding site. Binding is moderately strong with binding constants ranging from 3,200 +/- 500 M-1 for cellotetraose, to 25,000 +/- 3,000 M-1 for the larger sugars. The reactions are controlled by favorable standard free enthalpy changes which are compensated in a linear fashion by a significant decrease in entropy. A predominance of polar interactions such as hydrogen bonding together with van der Waals interactions provide the major driving forces for the binding event.

Actinomycetales↗
PubMed1996

Binding of the cellulose-binding domain of exoglucanase Cex from Cellulomonas fimi to insoluble microcrystalline cellulose is entropically driven.

Isothermal titration microcalorimetry is combined with solution-depletion isotherm data to analyze the thermodynamics of binding of the cellulose-binding domain (CBD) from the beta-1,4-(exo)glucanase Cex of Cellulomonas fimi to insoluble bacterial microcrystalline cellulose. Analysis of isothermal titration microcalorimetry data against two putative binding models indicates that the bacterial microcrystalline cellulose surface presents two independent classes of binding sites, with the predominant high-affinity site being characterized by a Langmuir-type Ka of 6.3 (+/-1.4) x 10(7) M-1 and the low-affinity site by a Ka of 1.1 (+/-0.6) x 10(6) M-1. CBDCex binding to either site is exothermic, but is mainly driven by a large positive change in entropy. This differs from protein binding to soluble carbohydrates, which is usually driven by a relatively large exothermic standard enthalpy change for binding. Differential heat capacity changes are large and negative, indicating that sorbent and protein dehydration effects make a dominant contribution to the driving force for binding.

Binding Sites↗
PubMed1996

Probing the role of tryptophan residues in a cellulose-binding domain by chemical modification.

The cellulose-binding domain (CBDCex) of the mixed function glucanase-xylanase Cex from Cellulomonas fimi contains five tryptophans, two of which are located within the beta-barrel structure and three exposed on the surface (Xu GY et al., 1995, Biochemistry 34:6993-7009). Although all five tryptophans can be oxidized by N-bromosuccinimide (NBS), stopped-flow measurements show that three tryptophans react faster than the other two. NMR analysis during the titration of CBDCex with NBS shows that the tryptophans on the surface of the protein are fully oxidized before there is significant reaction with the two buried tryptophans. Additionally, modification of the exposed tryptophans does not affect the conformation of the backbone of CBDCex, whereas complete oxidation of all five tryptophans denatures the polypeptide. The modification of the equivalent of one and two tryptophans by NBS reduces binding of CBDCex to cellulose by 70% and 90%, respectively. This confirms the direct role of the exposed aromatic residues in the binding of CBDCex to cellulose. Although adsorption to cellulose does afford some protection against NBS, as evidenced by the increased quantity of NBS required to oxidize all of the tryptophan residues, the polypeptide can still be oxidized completely when adsorbed. This suggests that, whereas the binding appears to be irreversible overall [Ong E et al., 1989, Bio/Technology 7:604-607], each of the exposed tryptophans interacts reversibly with cellulose.

Binding Sites↗
PubMed1996

Characterization of CenC, an enzyme from Cellulomonas fimi with both endo- and exoglucanase activities.

The cenC gene, encoding beta-1,4-glucanase C (CenC) from Cellulomonas fimi, was overexpressed in Escherichia coli with a tac-based expression vector. The resulting polypeptide, with an apparent molecular mass of 130 kDa, was purified from the cell extracts by affinity chromatography on cellulose followed by anion-exchange chromatography. N-terminal sequence analysis showed the enzyme to be properly processed. Mature CenC was optimally active at pH 5.0 and 45 degrees C. The enzyme was extremely active on soluble, fluorophoric, and chromophoric glycosides (4-methylumbelliferyl beta-glycosides, 2'-chloro-4'-nitrophenyl-beta-D-cellobioside, and 2'-chloro-4'-nitrophenyl-lactoside) and efficiently hydrolyzed carboxymethyl cellulose, barley beta-glucan, lichenan, and, to a lesser extent, glucomannan. CenC also hydrolyzed acid-swollen cellulose, Avicel, and bacterial microcrystalline cellulose. However, degradation of the latter was slow compared with its degradation by CenB, another C. fimi cellulose belonging to the same enzyme family. CenC acted with inversion of configuration at the anomeric carbon, in accordance with its classification as a family 9 member. The enzyme released mainly cellobiose from soluble cellodextrins and insoluble cellulose. Attack appeared to be from the reducing chain ends. Analysis of carboxymethyl cellulose hydrolysis suggests that CenC is semiprocessive enzyme with both endo- and exoglucanase activities.

Base Sequence↗
PubMed1996

Detection of cellulose with improved specificity using laser-based instruments.

Specific detection of cellulose has not been possible using laser based instruments such as laser scanning confocal microscopes (LSCM) and fluorescently activated cell sorters (FACS). Common cellulose dyes are nonspecific and/or nonexcitable with common lasers. Furthermore, many lasers emit wavelengths that overlap with autofluorescence from chlorophyll and other plant molecules. We demonstrate that a cellulase and an isolated bacterial cellulose binding domain (CBD) conjugated to fluorescent dyes can be used for laser detection of cellulose with improved specificity. Cell walls of differentiating tracheary elements and spores of Dictyostelium discoideum were tested in this study. For double labeling, autofluorescence interfering with the rhodamine signal was eliminated by collecting each excitation channel separately followed by computer recombination or by using a narrow band pass barrier filter allowing simultaneous channel collection. Using these methods, cellulose and microtubules tagged with a monoclonal antibody to alpha-tubulin were effectively colocalized in chlorophyll-containing tracheary elements using a LSCM. Also, Dictyostelium discoideum spores labeled or unlabeled with CBD-FITC were separated into two populations by FACS indicating that this tag should be useful in future mutagenesis experiments. Therefore, the presence or absence of cellulose can now be analyzed using common lasers.

Animals↗
PubMed1995

Cellobiohydrolase B, a second exo-cellobiohydrolase from the cellulolytic bacterium Cellulomonas fimi.

The gene cbhB from the cellulolytic bacterium Cellulomonas fimi encodes a polypeptide of 1090 amino acids. Cellobiohydrolase B (CbhB) is 1037 amino acids long, with a calculated molecular mass of 109765 Da. The enzyme comprises five domains: an N-terminal catalytic domain of 643 amino acids, three fibronectin type III repeats of 97 amino acids each, and a C-terminal cellulose-binding domain of 104 amino acids. The catalytic domain belongs to family 48 of glycosyl hydrolases. CbhB has a very low activity on CM-cellulose. Viscometric analysis of CM-cellulose hydrolysis indicates that the enzyme is an exoglucanase. Cellobiose is the major product of hydrolysis of cellulose. In common with two other exoglycanases from C. fimi, CbhB has low but detectable endoglucanase activity. CbhB is the second exo-cellobiohydrolase found in C. fimi. Therefore, the cellulase system of C. fimi resembles those of fungi in comprising multiple endoglucanases and cellobiohydrolases.

Actinomycetales↗
PubMed1995

Solution structure of a cellulose-binding domain from Cellulomonas fimi by nuclear magnetic resonance spectroscopy.

Multidimensional, multinuclear nuclear magnetic resonance spectroscopy combined with dynamical simulated annealing has been used to determine the structure of a 110 amino acid cellulose-binding domain (CBD) from Cex, a beta-1,4-glycanase from the bacterium Cellulomonas fimi (CBDcex). An experimental data set comprising 1795 interproton NOE-derived restraints, 50 phi, 34 chi 1, and 106 hydrogen bond restraints was used to calculate 20 final structures. The calculated structures have an average root-mean-square (rms) deviation about the mean structure of 0.41 A for backbone atoms and 0.67 A for all heavy atoms when fitted over the secondary structural elements. Chromatography, ultracentrifugation, and 15N NMR relaxation experiments demonstrate that CBDcex is a dimer in solution. While attempts to measure NOEs across the dimer interface were unsuccessful, a computational strategy was employed to generate dimer structures consistent with the derived data set. The results from the dimer calculations indicate that, while the monomer topologies produced in the context of the dimer can be variable, the relative positioning of secondary structural elements and side chains present in the monomer are restored upon dimer formation. CBDcex forms an extensive beta-sheet structure with a beta-barrel fold. Titration with cellohexaose, [beta-D-glucopyranosyl-(1,4)]5-D-glucose, establishes that Trp 54 and 72 participate in cellulose binding. Analysis of the structure shows that these residues are adjacent in space and exposed to solvent. Together with other proximate hydrophilic residues, these residues form a carbohydrate-binding cleft, which appears to be a feature common to all CBDs of the same family.

Actinomycetales↗
PubMed1995

The pTugA and pTugAS vectors for high-level expression of cloned genes in Escherichia coli.

Plasmids pTugA and pTugAS, designed for expression of cloned genes in Escherichia coli, possess the features of high-level inducible transcription, enhanced RNA translation, portability, high copy number, stability and versatility. In addition, pTugAS can be used to produce fusion proteins comprising a target protein and a cellulose-binding domain. Such fusion proteins can be purified in a single step by affinity chromatography on cellulose. Expression of two model gene fusions using the pTug plasmids resulted in yields of 500 mg of intracellular and 250 mg of extracellular recombinant protein per liter.

Alkaline Phosphatase↗
PubMed1995

Enhancement of the endo-beta-1,4-glucanase activity of an exocellobiohydrolase by deletion of a surface loop.

In the commonly accepted mechanism for enzymatic hydrolysis of cellulose, endo-beta-1,4-glucanases randomly cleave glucosidic bonds within glucan polymers, providing sites for attack by exo-cellobiohydrolases (EC 3.2.1.91). It has been proposed that hydrolysis by Trichoderma reesei cellobiohydrolase II is restricted to the ends of cellulose polymers because two surface loops cover its active site to form a tunnel. In a closely related endoglucanase, E2 from Thermomonospora fusca, access to the substrate appears to be relatively unhindered because the carboxyl-proximal loop is shortened, and the amino-proximal loop is displaced. The hypothesis was examined by deletion of a region in Cellulomonas fimi cellobiohydrolase A corresponding to part of the carboxyl-proximal loop of T. reesei cellobiohydrolase II. The mutation enhanced the endoglucanase activity of the enzyme on soluble O-(carboxymethyl)cellulose and altered its activities on 2',4'-dinitrophenyl-beta-D-cellobioside, insoluble cellulose, and cellotetraose.

Amino Acid Sequence↗
PubMed1995

Site-directed mutation of the putative catalytic residues of endoglucanase CenA from Cellulomonas fimi.

The catalytic domains of beta-1,4-glucanases can be grouped into families of related amino acid sequences. The endoglucanase CenA from Cellulomonas fimi is a member of family B. All enzymes from this family are believed to hydrolyze beta-1,4-glucosidic bonds using a general acid-base catalytic mechanism resulting in inversion of anomeric configuration at the scissile bond. Three-dimensional structures for two cellulases from family B have been determined by X-ray crystallographic analysis. These structures show that there are four Asp residues which are in a position to function as acid catalyst, base catalyst, and/or transition state stabilizers. These aspartates are conserved in all members of family B. The roles of Asp216, Asp252, Asp287, and Asp392, the corresponding amino acids in CenA, were determined. These aspartates have been systematically replaced with alanine and glutamate via site-directed mutagenesis, and the resulting effect on activity, substrate specificity, and overall structure has been determined. Changes in overall structure were monitored using circular dichroism spectroscopy, and no significant differences between the wild-type and mutant proteins were found. Active site structure was also found to be intact as all proteins bound to a cellobiose affinity column. The Michaelis-Menten parameters of the enzyme were determined on 2,4-dinitrophenyl cellobioside as well as (carboxymethyl)-cellulose and phosphoric acid-swollen cellulose. Initial characterization of mutant proteins indicates that Asp252 and Asp392 are the acid and base catalysts, respectively, in CenA. Residue Asp287 appears to aid Asp252 in acid catalysis, and Asp216 is not absolutely required for catalysis.

Aspartic Acid↗
PubMed1995

Comparison of a fungal (family I) and bacterial (family II) cellulose-binding domain.

A family II cellulose-binding domain (CBD) of an exoglucanase/xylanase (Cex) from the bacterium Cellulomonas fimi was replaced with the family I CBD of cellobiohydrolase I (CbhI) from the fungus Trichoderma reesei. Expression of the hybrid gene in Escherichia coli yielded up to 50 mg of the hybrid protein, CexCBDCbhI, per liter of culture supernatant. The hybrid was purified to homogeneity by affinity chromatography on cellulose. The relative association constants (Kr) for the binding of Cex, CexCBDCbhI, the catalytic domain of Cex (p33), and CbhI to bacterial microcrystalline cellulose (BMCC) were 14.9, 7.8, 0.8, and 10.6 liters g-1, respectively. Cex and CexCBDCbhI had similar substrate specificities and similar activities on crystalline and amorphous cellulose. Both released predominantly cellobiose and cellotriose from amorphous cellulose. CexCBDCbhI was two to three times less active than Cex on BMCC, but significantly more active than Cex on soluble cellulose and on xylan. Unlike Cex, the hybrid protein neither bound to alpha-chitin nor released small particles from dewaxed cotton fibers.

Amino Acid Sequence↗