Biomedical subjects

D Fotiadis

Publications and source records attributed to D Fotiadis.

11 recordsLinked to original sources

PubMed2003

Atomic force bio-analytics.

The atomic force microscope (AFM) allows biomolecules to be observed and manipulated under native conditions. It operates in buffer solution, produces molecular images with outstanding signal-to-noise ratio, and addresses single molecules. Progress in sample preparation and instrumentation has led to topographs that reveal sub-nanometer details and surface dynamics of biomolecules. Antibodies or oligonucleotides immobilized on cantilevers induce bending upon binding of the cognate biomolecule, allowing sub-picomolar concentrations to be measured. Biomolecules tethered between support and retracting AFM-tip produce force extension curves that reflect the mechanical stability of secondary structure elements. Furthermore, multifunctional tips may activate single molecules to observe them at work. In all cases, the cantilever is critical: its mechanical properties dictate the force-sensitivity and the scanning speed.

Microscopy, Atomic Force↗

PubMed2002

Progress in the analysis of membrane protein structure and function.

Structural information on membrane proteins is sparse, yet they represent an important class of proteins that is encoded by about 30% of all genes. Progress has primarily been achieved with bacterial proteins, but efforts to solve the structure of eukaryotic membrane proteins are also increasing. Most of the structures currently available have been obtained by exploiting the power of X-ray crystallography. Recent results, however, have demonstrated the accuracy of electron crystallography and the imaging power of the atomic force microscope. These instruments allow membrane proteins to be studied while embedded in the bi-layer, and thus in a functional state. The low signal-to-noise ratio of cryo-electron microscopy is overcome by crystallizing membrane proteins in a two-dimensional protein-lipid membrane, allowing its atomic structure to be determined. In contrast, the high signal-to-noise ratio of atomic force microscopy allows individual protein surfaces to be imaged at sub-nanometer resolution, and their conformational states to be sampled. This review summarizes the steps in membrane protein structure determination and illuminates recent progress.

Crystallization↗

PubMed2001

Two-dimensional crystals: a powerful approach to assess structure, function and dynamics of membrane proteins.

Electron crystallography and atomic force microscopy allow the study of two-dimensional membrane protein crystals. While electron crystallography provides atomic scale three-dimensional density maps, atomic force microscopy gives insight into the surface structure and dynamics at sub-nanometer resolution. Importantly, the membrane protein studied is in its native environment and its function can be assessed directly. The approach allows both the atomic structure of the membrane protein and the dynamics of its surface to be analyzed. In this way, the function-related conformational changes can be assessed, thus providing a detailed insight on the molecular mechanisms of essential biological processes.

Cell Membrane↗

PubMed2001

Bacterial Na(+)-ATP synthase has an undecameric rotor.

Synthesis of adenosine triphosphate (ATP) by the F(1)F(0) ATP synthase involves a membrane-embedded rotary engine, the F(0) domain, which drives the extra-membranous catalytic F(1) domain. The F(0) domain consists of subunits a(1)b(2) and a cylindrical rotor assembled from 9-14 alpha-helical hairpin-shaped c-subunits. According to structural analyses, rotors contain 10 c-subunits in yeast and 14 in chloroplast ATP synthases. We determined the rotor stoichiometry of Ilyobacter tartaricus ATP synthase by atomic force microscopy and cryo-electron microscopy, and show the cylindrical sodium-driven rotor to comprise 11 c-subunits.

Bacteria, Anaerobic↗

PubMed2000

Structural characterization of two aquaporins isolated from native spinach leaf plasma membranes.

Two members of the aquaporin family, PM28A and a new one, PM28C, were isolated and shown to be the major constituents of spinach leaf plasma membranes. These two isoforms were identified and characterized by matrix-assisted laser desorption ionization-mass spectrometry. Edman degradation yielded the amino acid sequence of two domains belonging to the new isoform. PM28B, a previously described isoform, was not found in our preparations. Scanning transmission electron microscopy mass analysis revealed both PM28 isoforms to be tetrameric. Two types of particles, a larger and a smaller one, were found by transmission electron microscopy of negatively stained solubilized proteins and by atomic force microscopy of PM28 two-dimensional crystals. The ratio of larger to smaller particles observed by transmission electron microscopy and single particle analysis correlated with the ratio of PM28A to PM28C determined by matrix-assisted laser desorption ionization-mass spectrometry. The absence of PM28B and the ratio of PM28A to PM28C indicate that these plasma membrane intrinsic proteins are differentially expressed in spinach leaves. These findings suggest that differential expression of the various aquaporin isoforms may regulate the water flux across the plasma membrane, in addition to the known mechanism of regulation by phosphorylation.

Amino Acid Sequence↗

PubMed2000

Surface tongue-and-groove contours on lens MIP facilitate cell-to-cell adherence.

The lens major intrinsic protein (MIP, AQP0) is known to function as a water and solute channel. However, MIP has also been reported to occur in close membrane contacts between lens fiber cells, indicating that it has adhesive properties in addition to its channel function. Using atomic force and cryo-electron microscopy we document that crystalline sheets reconstituted from purified ovine lens MIP mostly consisted of two layers. MIP lattices in the apposing membranes were in precise register, and determination of the membrane sidedness demonstrated that MIP molecules bound to each other via their extracellular surfaces. The surface structure of the latter was resolved to 0.61 nm and revealed two protruding domains providing a tight "tongue-and-groove" fit between apposing MIP molecules. Cryo-electron crystallography produced a projection map at 0.69 nm resolution with a mirror symmetry axis at 45 degrees to the lattice which was consistent with the double-layered nature of the reconstituted sheets. These data strongly suggest an adhesive function of MIP, and strengthen the view that MIP serves dual roles in the lens.

Aluminum Silicates↗

PubMed2000

Conformations of the rhodopsin third cytoplasmic loop grafted onto bacteriorhodopsin.

BACKGROUND: The third cytoplasmic loop of rhodopsin (Rho EF) is important in signal transduction from the retinal in rhodopsin to its G protein, transducin. This loop also interacts with rhodopsin kinase, which phosphorylates light-activated rhodopsin, and arrestin, which displaces transducin from light-activated phosphorylated rhodopsin. RESULTS: We replaced eight residues of the EF loop of bacteriorhodopsin (BR) with 24 residues from the third cytoplasmic loop of bovine Rho EF. The surfaces of purple membrane containing the mutant BR (called IIIN) were imaged by atomic force microscopy (AFM) under physiological conditions to a resolution of 0.5-0.7 nm. The crystallinity and extracellular surface of IIIN were not perturbed, and the cytoplasmic surface of IIIN increased in height compared with BR, consistent with the larger loop. Ten residues of Rho EF were excised by V8 protease, revealing helices E and F in the AFM topographs. Rho EF was modeled onto the BR structure, and the envelope derived from the AFM data of IIIN was used to select probable models. CONCLUSIONS: A likely conformation of Rho EF involves some extension of helices E and F, with the tip of the loop lying over helix C and projecting towards the C terminus. This is consistent with mutagenesis data showing the TTQ transducin-binding motif close to loop CD, and cysteine cross-linking data indicating the C-terminal part of Rho EF to be close to the CD loop.

Amino Acid Sequence↗

PubMed1999

The reaction center complex from the green sulfur bacterium Chlorobium tepidum: a structural analysis by scanning transmission electron microscopy.

The three-dimensional (3D) structure of the reaction center (RC) complex isolated from the green sulfur bacterium Chlorobium tepidum was determined from projections of negatively stained preparations by angular reconstitution. The purified complex contained the PscA, PscC, PscB, PscD subunits and the Fenna-Matthews-Olson (FMO) protein. Its mass was found to be 454 kDa by scanning transmission electron microscopy (STEM), indicating the presence of two copies of the PscA subunit, one copy of the PscB and PscD subunits, three FMO proteins and at least one copy of the PscC subunit. An additional mass peak at 183 kDa suggested that FMO trimers copurify with the RC complexes. Images of negatively stained RC complexes were recorded by STEM and aligned and classified by multivariate statistical analysis. Averages of the major classes indicated that different morphologies of the elongated particles (length=19 nm, width=8 nm) resulted from a rotation around the long axis. The 3D map reconstructed from these projections allowed visualization of the RC complex associated with one FMO trimer. A second FMO trimer could be correspondingly accommodated to yield a symmetric complex, a structure observed in a small number of side views and proposed to be the intact form of the RC complex.

Bacterial Proteins↗

PubMed1999

Electrostatically balanced subnanometer imaging of biological specimens by atomic force microscope.

To achieve high-resolution topographs of native biological macromolecules in aqueous solution with the atomic force microscope (AFM) interactions between AFM tip and sample need to be considered. Short-range forces produce the submolecular information of high-resolution topographs. In contrast, no significant high-resolution information is provided by the long-range electrostatic double-layer force. However, this force can be adjusted by pH and electrolytes to distribute the force applied to the AFM tip over a large sample area. As demonstrated on fragile biological samples, adjustment of the electrolyte solution results in a local reduction of both vertical and lateral forces between the AFM tip and proteinous substructures. Under such electrostatically balanced conditions, the deformation of the native protein is minimized and the sample surface can be reproducibly contoured at a lateral resolution of 0.6 nm.

Bacterial Proteins↗

PubMed1998

Mapping flexible protein domains at subnanometer resolution with the atomic force microscope.

The mapping of flexible protein domains with the atomic force microscope is reviewed. Examples discussed are the bacteriorhodopsin from Halobacterium salinarum, the head-tail-connector from phage phi29, and the hexagonally packed intermediate layer from Deinococcus radiodurans which all were recorded in physiological buffer solution. All three proteins undergo reversible structural changes that are reflected in standard deviation maps calculated from aligned topographs of individual protein complexes. Depending on the lateral resolution (up to 0.8 nm) flexible surface regions can ultimately be correlated with individual polypeptide loops. In addition, multivariate statistical classification revealed the major conformations of the protein surface.

Bacterial Proteins↗

PubMed1998

Surface analysis of the photosystem I complex by electron and atomic force microscopy.

Two-dimensional (2D) crystals of the photosystem I (PSI) reaction center from Synechococcus sp. OD24 were analyzed by electron and atomic force microscopy. Surface relief reconstructions from electron micrographs of freeze-dried unidirectionally shadowed samples and topographs recorded with the atomic force microscope (AFM) provided a precise definition of the lumenal and stromal PSI surfaces. The lumenal surface was composed of four protrusions that surrounded an indentation. One of the protrusions, the PsaF subunit, was often missing. Removal of the extrinsic proteins with the AFM stylus exposed the stromal side of the PSI core, whose surface structure could then be imaged at a resolution better than 1.4 nm. This interfacial surface between core and extrinsic subunits, had a pseudo-2-fold symmetry and protrusions that correlated with the surface helices e and e' or were at the sites of putative alpha-helix-connecting loops estimated from the 4 A map of the complex. The molecular dissection achieved with the AFM, opens new possibilities to unveil the interfaces between subunits of supramolecular assemblies.

Amino Acid Sequence↗