Search PubMed⌕ Search

Biomedical subjects

D E Ingber

Publications and source records attributed to D E Ingber.

At least 19 recordsLinked to original sources
PubMed1997

Vinculin promotes cell spreading by mechanically coupling integrins to the cytoskeleton.

Mouse F9 embryonic carcinoma 5.51 cells that lack the cytoskeletal protein vinculin spread poorly on extracellular matrix compared with wild-type F9 cells or two vinculin-transfected clones (5.51Vin3 and Vin4; Samuels et al., 1993, J. Cell Biol. 121, 909-921). In the present study, we used this model system to determine how the presence of vinculin promotes cytoskeletal alterations and associated changes in cell shape. Microscopic analysis of cell spreading at early times, revealed that 5.51 cells retained the ability to form filopodia; however, they could not form lamellipodia, assemble stress fibers, or efficiently spread over the culture substrate. Detergent (Triton X-100) studies revealed that these major differences in cell morphology and cytoskeletal organization did not result from differences in levels of total polymerized or cross-linked actin. Biochemical studies showed that 5.51 cells, in addition to lacking vinculin, exhibited slightly reduced levels of alpha-actinin and paxillin in their detergent-insoluble cytoskeleton. The absence of vinculin correlated with a decrease in the mechanical stiffness of the integrin-cytoskeleton linkage, as measured using cell magnetometry. Furthermore, when vinculin was replaced by transfection in 5.51Vin3 and 5.51Vin4 cells, the levels of cytoskeletal-associated alpha-actinin and paxillin, the efficiency of transmembrane mechanical coupling, and the formation of actin stress fibers were all restored to near wild-type levels. These findings suggest that vinculin may promote cell spreading by stabilizing focal adhesions and transferring mechanical stresses that drive cytoskeletal remodeling, rather than by altering the total level of actin polymerization or cross-linking.

Actinin↗
PubMed1997

Demonstration of mechanical connections between integrins, cytoskeletal filaments, and nucleoplasm that stabilize nuclear structure.

We report here that living cells and nuclei are hard-wired such that a mechanical tug on cell surface receptors can immediately change the organization of molecular assemblies in the cytoplasm and nucleus. When integrins were pulled by micromanipulating bound microbeads or micropipettes, cytoskeletal filaments reoriented, nuclei distorted, and nucleoli redistributed along the axis of the applied tension field. These effects were specific for integrins, independent of cortical membrane distortion, and were mediated by direct linkages between the cytoskeleton and nucleus. Actin microfilaments mediated force transfer to the nucleus at low strain; however, tearing of the actin gel resulted with greater distortion. In contrast, intermediate filaments effectively mediated force transfer to the nucleus under both conditions. These filament systems also acted as molecular guy wires to mechanically stiffen the nucleus and anchor it in place, whereas microtubules acted to hold open the intermediate filament lattice and to stabilize the nucleus against lateral compression. Molecular connections between integrins, cytoskeletal filaments, and nuclear scaffolds may therefore provide a discrete path for mechanical signal transfer through cells as well as a mechanism for producing integrated changes in cell and nuclear structure in response to changes in extracellular matrix adhesivity or mechanics.

Acrylamide↗
PubMed1997

Tensegrity: the architectural basis of cellular mechanotransduction.

Physical forces of gravity, hemodynamic stresses, and movement play a critical role in tissue development. Yet, little is known about how cells convert these mechanical signals into a chemical response. This review attempts to place the potential molecular mediators of mechanotransduction (e.g. stretch-sensitive ion channels, signaling molecules, cytoskeleton, integrins) within the context of the structural complexity of living cells. The model presented relies on recent experimental findings, which suggests that cells use tensegrity architecture for their organization. Tensegrity predicts that cells are hard-wired to respond immediately to mechanical stresses transmitted over cell surface receptors that physically couple the cytoskeleton to extracellular matrix (e.g. integrins) or to other cells (cadherins, selectins, CAMs). Many signal transducing molecules that are activated by cell binding to growth factors and extracellular matrix associate with cytoskeletal scaffolds within focal adhesion complexes. Mechanical signals, therefore, may be integrated with other environmental signals and transduced into a biochemical response through force-dependent changes in scaffold geometry or molecular mechanics. Tensegrity also provides a mechanism to focus mechanical energy on molecular transducers and to orchestrate and tune the cellular response.

Animals↗
PubMed1997

Cytoskeletal mechanics in pressure-overload cardiac hypertrophy.

We have shown that the cellular contractile dysfunction characteristic of pressure-overload cardiac hypertrophy results not from an abnormality intrinsic to the myofilament portion of the cardiocyte cytoskeleton but rather from an increased density of the microtubule component of the extramyofilament portion of the cardiocyte cytoskeleton. To determine how, in physical terms, this increased microtubule density mechanically overloads the contractile apparatus at the cellular level, we measured cytoskeletal stiffness and apparent viscosity in isolated cardiocytes via magnetic twisting cytometry, a technique by which magnetically induced force is applied directly to the cytoskeleton through integrin-coupled ferromagnetic beads coated with Arg-Gly-Asp (RGD) peptide. Measurements were made in two groups of cardiocytes from cats with right ventricular (RV) hypertrophy induced by pulmonary artery banding: (1) those from the pressure-overloaded RV and (2) those from the normally loaded same-animal control left ventricle (LV). Cytoskeletal stiffness increased almost twofold, from 8.53 +/- 0.77 dyne/cm2 in the normally loaded LV cardiocytes to 16.46 +/- 1.32 dyne/cm2 in the hypertrophied RV cardiocytes. Cytoskeletal apparent viscosity increased almost fourfold, from 20.97 +/- 1.92 poise in the normally loaded LV cardiocytes to 87.85 +/- 6.95 poise in the hypertrophied RV cardiocytes. In addition to these baseline data showing differing stiffness and, especially, apparent viscosity in the two groups of cardiocytes, microtubule depolymerization by colchicine was found to return both the stiffness and the apparent viscosity of the pressure overload-hypertrophied RV cells fully to normal. Conversely, microtubule hyperpolymerization by taxol increased the stiffness and apparent viscosity values of normally loaded LV cardiocytes to the abnormal values given above for pressure-hypertrophied RV cardiocytes. Thus, increased microtubule density constitutes primarily a viscous load on the cardiocyte contractile apparatus in pressure-overload cardiac hypertrophy.

Animals↗
PubMed1996

Controlling cell attachment on contoured surfaces with self-assembled monolayers of alkanethiolates on gold.

This paper describes a method based on experimentally simple techniques--microcontact printing and micromolding in capillaries--to prepare tissue culture substrates in which both the topology and molecular structure of the interface can be controlled. The method combines optically transparent contoured surfaces with self-assembled monolayers (SAMs) of alkanethiolates on gold to control interfacial characteristics; these tailored interfaces, in turn, control the adsorption of proteins and the attachment of cells. The technique uses replica molding in poly(dimethylsiloxane) molds having micrometer-scale relief patterns on their surfaces to form a contoured film of polyurethane supported on a glass slide. Evaporation of a thin (< 12 nm) film of gold on this surface-contoured polyurethane provides an optically transparent substrate, on which SAMs of terminally functionalized alkanethiolates can be formed. In one procedure, a flat poly(dimethylsiloxane) stamp was used to form a SAM of hexadecanethiolate on the raised plateaus of the contoured surface by contact printing hexadecanethiol [HS(CH2)15CH3]; a SAM terminated in tri(ethylene glycol) groups was subsequently formed on the bare gold remaining in the grooves by immersing the substrate in a solution of a second alkanethiol [HS(CH2)11(OCH2CH2)3OH]. Then this patterned substrate was immersed in a solution of fibronectin, the protein adsorbed only on the methyl-terminated plateau regions of the substrate [the tri(ethylene glycol)-terminated regions resisted the adsorption of protein]; bovine capillary endothelial cells attached only on the regions that adsorbed fibronectin. A complementary procedure confined protein adsorption and cell attachment to the grooves in this substrate.

Animals↗
PubMed1996

A microstructural approach to cytoskeletal mechanics based on tensegrity.

Mechanical properties of living cells are commonly described in terms of the laws of continuum mechanics. The purpose of this report is to consider the implications of an alternative approach that emphasizes the discrete nature of stress bearing elements in the cell and is based on the known structural properties of the cytoskeleton. We have noted previously that tensegrity architecture seems to capture essential qualitative features of cytoskeletal shape distortion in adherent cells (Ingber, 1993a; Wang et al., 1993). Here we extend those qualitative notions into a formal microstructural analysis. On the basis of that analysis we attempt to identify unifying principles that might underlie the shape stability of the cytoskeleton. For simplicity, we focus on a tensegrity structure containing six rigid struts interconnected by 24 linearly elastic cables. Cables carry initial tension ("prestress") counterbalanced by compression of struts. Two cases of interconnectedness between cables and struts are considered: one where they are connected by pin-joints, and the other where the cables run through frictionless loops at the junctions. At the molecular level, the pinned structure may represent the case in which different cytoskeletal filaments are cross-linked whereas the looped structure represents the case where they are free to slip past one another. The system is then subjected to uniaxial stretching. Using the principal of virtual work, stretching force vs. extension and structural stiffness vs. stretching force relationships are calculated for different prestresses. The stiffness is found to increase with increasing prestress and, at a given prestress, to increase approximately linearly with increasing stretching force. This behavior is consistent with observations in living endothelial cells exposed to shear stresses (Wang & Ingber, 1994). At a given prestress, the pinned structure is found to be stiffer than the looped one, a result consistent with data on mechanical behavior of isolated, cross-linked and uncross-linked actin networks (Wachsstock et al., 1993). On the basis of our analysis we concluded that architecture and the prestress of the cytoskeleton might be key features that underlie a cell's ability to regulate its shape.

Animals↗
PubMed1996

Integrin-dependent control of inositol lipid synthesis in vascular endothelial cells and smooth muscle cells.

Extracellular matrix (ECM) molecules, such as fibronectin (FN), regulate fibroblast sensitivity to soluble growth factors, in part, by controlling cellular levels of phosphatidylinositol bis-phosphate (PIP2), the substrate for phospholipase C-gamma (McNamee et al., 1993, J. Cell Biol. 121, 673-678). In the present study, we extended these investigations by exploring whether cells of the vascular wall also exhibit this response and analyzing the mechanism by which adhesion to ECM regulates intracellular PIP2 mass. Capillary endothelial cells, pulmonary vascular smooth muscle cells, and C3H 101/2 fibroblasts were all found to exhibit a similar two- to threefold increase in PIP2 mass within 3 h after binding to dishes coated with FN. Furthermore, similar effects were observed using dishes coated with a variety of different ECM molecules, including collagen types I and IV as well as a synthetic RGD-containing peptide. An increase in PIP2 mass also was produced when suspended cells bound to microbeads (4.5 micron diameter; coated with RGD-peptide or anti-integrin beta 1 antibody) that induce local integrin clustering and focal adhesion formation, independently of cell spreading. In contrast, neither binding of soluble FN nor binding of microbeads coated with ligands for other transmembrane surface receptors (e.g., acetylated low-density lipoprotein, antibodies against heparan sulfate) had any effect on PIP2 mass. While these results suggest that integrin clustering stimulates PIP2 synthesis, no change in total cellular or cytoskeletal-associated phosphatidylinositol-4-phosphate kinase (PIP kinase) activity could be detected when cells bound to immobilized integrin ligands. However, when focal adhesion complexes were isolated from these cells using a magnetic procedure (G. Plopper and D. E. Ingber, 1993, Biochem. Biophys. Res. Commun. 193, 571-578), this subfraction of the cytoskeleton was found to be enriched for PIP kinase activity by more than twofold relative to the whole cytoskeleton. These data suggest that ECM binding may increase PIP2 mass in vascular cells by clustering cell surface integrin receptors and activating cytoskeletal-associated PIP kinases locally within the focal adhesion complex.

Animals↗
PubMed1996

Modulation of adhesion-dependent cAMP signaling by echistatin and alendronate.

We measured intracellular cAMP levels in cells during attachment and spreading on different extracellular matrix (ECM) proteins. Increases in cAMP were observed within minutes when cells attached to fibronectin, vitronectin, and a synthetic RGD-containing fibronectin peptide (Petite 2000), but not when they adhered to another integrin alpha nu beta 3 ligand, echistatin. Because echistatin also inhibits bone resorption, we measured the effects of adding another osteoporosis inhibitor, alendronate, in this system. Alendronate inhibited the cAMP increase induced by ligands that primarily utilize integrin alpha nu beta 3 (vitronectin, Peptite 2000), but not by fibronectin which can also use integrin alpha 5 beta 1. These results show that cell adhesion to ECM can increase intracellular cAPM levels and raise the possibility that inhibitors of osteoporosis may act, in part, by preventing activation of this pathway by integrins.

Alendronate↗
PubMed1996

Leukocyte adhesion to vascular endothelium induces E-selectin linkage to the actin cytoskeleton.

We have examined functions of the cytoplasmic domain of E-selectin, an inducible endothelial transmembrane protein, especially its ability to associate with the cytoskeleton during leukocyte adhesion. Confocal microscopy of interleukin-1 beta (IL-1 beta)-activated human umbilical vein endothelial cells (HUVEC) visualized clustering of E-selectin molecules in the vicinity of leukocyte-endothelial cell attachment sites. A detergent based extraction and Western blotting procedure demonstrated an association of E-selectin with the insoluble (cytoskeletal) fraction of endothelial monolayers that correlated with adhesion of leukocytes via an E-selectin-dependent mechanism. A mutant form of E-selectin lacking the cytoplasmic domain (tailless E-selectin) was expressed in COS-7 cell and supported leukocyte attachment (in a nonstatic adhesion assay) in a fashion similar to the native E-selectin molecule, but failed to become associated with the cytoskeletal fraction. To identify the cytoskeletal components that associate with the cytoplasmic domain of E-selectin, paramagnetic beads coated with the adhesion-blocking anti-E-selectin monoclonal antibody H18/7 were incubated with IL-1 beta-activated HUVEC, and then subjected to detergent extraction and magnetic separation. Certain actin-associated proteins, including alpha-actinin, vinculin, filamin, paxillin, as well as focal adhesion kinase (FAK), were copurified by this procedure, however talin was not. When a mechanical stress was applied to H18/7-coated ferromagnetic beads bound to the surface of IL-1 beta-activated HUVEC, using a magnetical twisting cytometer, the observed resistance to the applied stress was inhibited by cytochalasin D, thus demonstrating transmembrane cytoskeletal mechanical linkage. COS-7 cells transfected with the tailless E-selectin failed to show resistance to the twisting stress. Taken together, these data indicate that leukocyte adhesion to cytokine-activated HUVEC induces transmembrane cytoskeletal linkage of E-selectin through its cytoplasmic domain, a process which may have important implications for cell-cell signaling as well as mechanical anchoring during leukocyte-endothelial adhesive interactions.

Actins↗
PubMed1996

Integrin-dependent induction of early growth response genes in capillary endothelial cells.

Studies were carried out to explore how extracellular matrix molecules, such as fibronectin (FN), promote capillary endothelial (CE) cell growth. When G0-synchronized cells were plated on FN-coated dishes, expression of the immediate-early mRNAs, c-fos, c-myc and c-jun, was rapidly induced, even in the absence of serum or soluble growth factors. Moreover, plating cells on different FN densities (5-200 micrograms/150 mm dish), resulted in a dose-dependent increase in the steady state levels of these mRNAs. Addition of FGF potentiated gene activation and was required for maximal DNA synthesis, however, the overall steady-state level of gene induction was dictated primarily by the density of immobilized FN. Expression of junB also was induced when suspended cells bound RGD-peptide coated microbeads that promote integrin clustering, but not when the suspended cells bound beads coated with other receptor ligands (e.g. acetylated low density protein) or when they were stimulated by soluble FN or FGF in the absence of substrate adhesion. c-Jun exhibited a similar requirement for gene induction except that it also was partially induced by binding to soluble FN alone. In contrast, c-fos expression was induced by all stimuli tested. Interestingly, inhibition of Na+/H+ exchange using hexamethylene-amiloride prevented most of the FN-induced increase in c-jun expression whereas it was relatively ineffective when cells were simultaneously stimulated by both FN and FGF. These data demonstrate that cell adhesion to extracellular matrix and associated integrin binding can directly activate signaling cascades in quiescent CE cells that lead to induction of immediate-early genes associated with the G0/G1 transition and thereby, stimulate these cells to reenter the growth cycle.

Animals↗
PubMed1995

Direct binding of F actin to the cytoplasmic domain of the alpha 2 integrin chain in vitro.

The transmembrane integrins have been shown to interact with the cytoskeleton via noncovalent binding between cytoplasmic domains (CDs) of integrin beta chains and various actin binding proteins within the focal adhesion complex. Direct or indirect integrin alpha chain CD binding to the actin cytoskeleton has not been reported. We show here that actin, as an abundant constituent of focal adhesion complex proteins isolated from fibroblasts, binds strongly and specifically to alpha 2 CD, but not to alpha 1 CD peptide. Similar specific binding to alpha 2 CD peptide was seen for highly purified F actin, free of putative actin-binding proteins. The bound complex of actin and peptide was visualized directly by coprecipitation, and actin binding was abrogated by removal of a five amino acid sequence from the alpha 2 CD peptide. Our findings may explain the earlier observation that, while integrins alpha 2 beta 1 and alpha 1 beta 1 both bind to collagen, only alpha 2 beta 1 can mediate contraction of extracellular collagen matrices.

Actins↗
PubMed1995

Cell shape, cytoskeletal mechanics, and cell cycle control in angiogenesis.

Capillary endothelial cells can be switched between growth and differentiation by altering cell-extracellular matrix interactions and thereby, modulating cell shape. Studies were carried out to determine when cell shape exerts its growth-regulatory influence during cell cycle progression and to explore the role of cytoskeletal structure and mechanics in this control mechanism. When G0-synchronized cells were cultured in basic fibroblast growth factor (FGF)-containing defined medium on dishes coated with increasing densities of fibronectin or a synthetic integrin ligand (RGD-containing peptide), cell spreading, nuclear extension, and DNA synthesis all increased in parallel. To determine the minimum time cells must be adherent and spread on extracellular matrix (ECM) to gain entry into S phase, cells were removed with trypsin or induced to retract using cytochalasin D at different times after plating. Both approaches revealed that cells must remain extended for approximately 12-15 h and hence, most of G1, in order to enter S phase. After this restriction point was passed, normally 'anchorage-dependent' endothelial cells turned on DNA synthesis even when round and in suspension. The importance of actin-containing microfilaments in shape-dependent growth control was confirmed by culturing cells in the presence of cytochalasin D (25-1000 ng ml-1): dose-dependent inhibition of cell spreading, nuclear extension, and DNA synthesis resulted. In contrast, induction of microtubule disassembly using nocodazole had little effect on cell or nuclear spreading and only partially inhibited DNA synthesis. Interestingly, combination of nocodazole with a suboptimal dose of cytochalasin D (100 ng ml-1) resulted in potent inhibition of both spreading and growth, suggesting that microtubules are redundant structural elements which can provide critical load-bearing functions when microfilaments are partially compromised. Similar synergism between nocodazole and cytochalasin D was observed when cytoskeletal stiffness was measured directly in living cells using magnetic twisting cytometry. These results emphasize the importance of matrix-dependent changes in cell and nuclear shape as well as higher order structural interactions between different cytoskeletal filament systems for control of capillary cell growth during angiogenesis.

Actin Cytoskeleton↗
PubMed1995

Convergence of integrin and growth factor receptor signaling pathways within the focal adhesion complex.

Extracellular matrix controls capillary endothelial cell sensitivity to soluble mitogens by binding integrin receptors and thereby activating a chemical signaling response that rapidly integrates with growth factor-induced signaling mechanisms. Here we report that in addition to integrins, growth factor receptors and multiple molecules that transduce signals conveyed by both types of receptors are immobilized on the cytoskeleton (CSK) and spatially integrated within the focal adhesion complex (FAC) at the site of integrin binding. FACs were rapidly induced in round cells and physically isolated from the remainder of the CSK after detergent-extraction using magnetic microbeads coated with fibronectin or a synthetic RGD-containing peptide. Immunofluorescence microscopy revealed that multiple signaling molecules (e.g., pp60c-src, pp125FAK, phosphatidylinositol-3-kinase, phospholipase C-gamma, and Na+/H+ antiporter) involved in both integrin and growth factor receptor signaling pathways became associated with the CSK framework of the FAC within 15 min after binding to beads coated with integrin ligands. Recruitment of tyrosine kinases to the FAC was also accompanied by a local increase in tyrosine phosphorylation, as indicated by enhanced phosphotyrosine staining at the site of integrin binding. In contrast, neither recruitment of signaling molecules nor increased phosphotyrosine staining was observed when cells bound to beads coated with a control ligand (acetylated low density lipoprotein) that ligates transmembrane scavenger receptors, but does not induce FAC formation. Western blot analysis confirmed that FACs isolated using RGD-beads were enriched for pp60c-src, pp125FAK, phospholipase C-gamma, and the Na+/H+ antiporter when compared with intact CSK or basal cell surface preparations that retained lipid bilayer. Isolated FACs were also greatly enriched for the high affinity fibroblast growth factor receptor flg. Most importantly, isolated FACs continued to exhibit multiple chemical signaling activities in vitro, including protein tyrosine kinase activities (pp60c-src and pp125FAK) as well as the ability to undergo multiple sequential steps in the inositol lipid synthesis cascade. These data suggest that many of the chemical signaling events that are induced by integrins and growth factor receptors in capillary cells may effectively function in a "solid-state" on insoluble CSK scaffolds within the FAC and that the FAC may represent a major site for signal integration between these two regulatory pathways. Future investigations into the biochemical and biophysical basis of signal transduction may be facilitated by this method, which results in isolation of FACs that retain the CSK framework as well as multiple associated chemical signaling activities.

Adrenal Cortex↗
PubMed1995

Cytoskeletal filament assembly and the control of cell spreading and function by extracellular matrix.

This study was undertaken to analyze how cell binding to extracellular matrix produces changes in cell shape. We focused on the initial process of cell spreading that follows cell attachment to matrix and, thus, cell 'shape' changes are defined here in terms of alterations in projected cell areas, as determined by computerized image analysis. Cell spreading kinetics and changes in microtubule and actin microfilament mass were simultaneously quantitated in hepatocytes plated on different extracellular matrix substrata. The initial rate of cell spreading was highly dependent on the matrix coating density and decreased from 740 microns 2/h to 50 microns 2/h as the coating density was lowered from 1000 to 1 ng/cm2. At approximately 4 to 6 hours after plating, this initial rapid spreading rate slowed and became independent of the matrix density regardless of whether laminin, fibronectin, type I collagen or type IV collagen was used for cell attachment. Analysis of F-actin mass revealed that cell adhesion to extracellular matrix resulted in a 20-fold increase in polymerized actin within 30 minutes after plating, before any significant change in cell shape was observed. This was followed by a phase of actin microfilament disassembly which correlated with the most rapid phase of cell extension and ended at about 6 hours; F-actin mass remained relatively constant during the slow matrix-independent spreading phase. Microtubule mass increased more slowly in spreading cells, peaking at 4 hours, the time at which the transition between rapid and slow spreading rates was observed. However, inhibition of this early rise in microtubule mass using either nocodazole or cycloheximide did not prevent this transition. Use of cytochalasin D revealed that microfilament integrity was absolutely required for hepatocyte spreading whereas interference with microtubule assembly (using nocodazole or taxol) or protein synthesis (using cycloheximide) only partially suppressed cell extension. In contrast, cell spreading could be completely inhibited by combining suboptimal doses of cytochalasin D and nocodazole, suggesting that intact microtubules can stabilize cell form when the microfilament lattice is partially compromised. The physiological relevance of the cytoskeleton and cell shape in hepatocyte physiology was highlighted by the finding that a short exposure (6 hour) of cells to nocodazole resulted in production of smaller cells 42 hours later that exhibited enhanced production of a liver-specific product (albumin). These data demonstrate that spreading and flattening of the entire cell body is not driven directly by net polymerization of either microfilaments or microtubules.(ABSTRACT TRUNCATED AT 400 WORDS)

Animals↗
PubMed1994

Engineering cell shape and function.

An elastomeric stamp, containing defined features on the micrometer scale, was used to imprint gold surfaces with specific patterns of self-assembled monolayers of alkanethiols and, thereby, to create islands of defined shape and size that support extracellular matrix protein adsorption and cell attachment. Through this technique, it was possible to place cells in predetermined locations and arrays, separated by defined distances, and to dictate their shape. Limiting the degree of cell extension provided control over cell growth and protein secretion. This method is experimentally simple and highly adaptable. It should be useful for applications in biotechnology that require analysis of individual cells cultured at high density or repeated access to cells placed in specified locations.

Albumins↗
PubMed1994

Electrically conducting polymers can noninvasively control the shape and growth of mammalian cells.

Electrically conducting polymers are novel in that their surface properties, including charge density and wettability, can be reversibly changed with an applied electrical potential. Such properties might render conducting polymers unique for biological applications. However, the majority of research on conducting polymers has been carried out under nonbiological conditions. We synthesized optically transparent polypyrrole thin films and studied them in environments suitable for protein adsorption and mammalian cell culture. In vitro studies demonstrated that extracellular matrix molecules, such as fibronectin, adsorb efficiently onto polypyrrole thin films and support cell attachment under serum-free conditions. When aortic endothelial cells were cultured on fibronectin-coated polypyrrole (oxidized) in either chemically defined medium or the presence of serum, cells spread normally and synthesized DNA. In contrast, when the polymer was switched to its neutral state by applying an electrical potential, both cell extension and DNA synthesis were inhibited without affecting cell viability. Application of a similar electrical potential to cells cultured on indium tin oxide surfaces had no effect on cell shape or function. These data suggest that electrically conducting polymers may represent a type of culture substrate which could provide a noninvasive means to control the shape and function of adherent cells, independent of any medium alteration.

Animals↗
PubMed1994

Control of cytoskeletal mechanics by extracellular matrix, cell shape, and mechanical tension.

We have investigated how extracellular matrix (ECM) alters the mechanical properties of the cytoskeleton (CSK). Mechanical stresses were applied to integrin receptors on the apical surfaces of adherent endothelial cells using RGD-coated ferromagnetic microbeads (5.5-microns diameter) in conjunction with a magnetic twisting device. Increasing the number of basal cell-ECM contacts by raising the fibronectin (FN) coating density from 10 to 500 ng/cm2 promoted cell spreading by fivefold and increased CSK stiffness, apparent viscosity, and permanent deformation all by more than twofold, as measured in response to maximal stress (40 dyne/cm2). When the applied stress was increased from 7 to 40 dyne/cm2, the stiffness and apparent viscosity of the CSK increased in parallel, although cell shape, ECM contacts, nor permanent deformation was altered. Application of the same stresses over a lower number ECM contacts using smaller beads (1.4-microns diameter) resulted in decreased CSK stiffness and apparent viscosity, confirming that this technique probes into the depth of the CSK and not just the cortical membrane. When magnetic measurements were carried out using cells whose membranes were disrupted and ATP stores depleted using saponin, CSK stiffness and apparent viscosity were found to rise by approximately 20%, whereas permanent deformation decreased by more than half. Addition of ATP (250 microM) under conditions that promote CSK tension generation in membrane-permeabilized cells resulted in decreases in CSK stiffness and apparent viscosity that could be detected within 2 min after ATP addition, before any measurable change in cell size. Permanent deformation only decreased after 20 min, once the CSK lattice had physically contracted. Importantly, regardless of cell shape or membrane continuity, CSK stiffness increased in direct proportion to the applied stress, as predicted by tensegrity (tensional integrity) cell models. These results suggest that the effects of ECM on CSK mechanics are not due to changes in osmotic or hydrostatic pressures. Rather, ECM alters CSKstiffness and apparent viscosity by binding integrins, promoting formation of molecular links with the CSK, transmitting mechanical stresses across these linkages, and inducing structural rearrangements within a continuous, tensionally integrated CSK lattice. In contrast, permanent deformation in the CSK appears to be more tightly coupled to cell extension and depends on both passive plasticity and dynamic remodeling events.

Animals↗