Search PubMed⌕ Search

Biomedical subjects

D E Berg

Publications and source records attributed to D E Berg.

At least 145 records · Page 8Linked to original sources
PubMed1985

Sequences essential for IS50 transposition. The first base-pair.

Sequences near the ends of the insertion element IS50 are essential for its transposition, probably because they serve as sites upon which the IS50-encoded transposase protein acts. To determine if these essential sequences include the first base-pair at each end of IS50 we generated 5'C to 5'G transversions at these positions. Each mutation reduced the transposition frequency to 1% to 2% of wild-type. DNA sequence analyses showed that the mutant 5'G is preserved during transposition.

Bacteriophage lambda↗
PubMed1985

Mechanisms of transposition in bacteria.

The transposable elements of bacteria are diverse in size, functional arrangement, DNA sequence, and in their modes of transposition. We review here data suggesting that the kanamycin-resistance transposon Tn5 moves without replicating (conservative transposition), but the ampicillin-resistance transposon Tn3 is duplicated when it transposes, and that both the chloramphenicol-resistance transposon Tn9 and bacteriophage Mu are replicated in some events but not in others. A model is presented in which conservative and replicative transposition are alternative branches of a single pathway.

Bacteria↗
PubMed1985

IS50-mediated inverse transposition: specificity and precision.

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.

Base Sequence↗
PubMed1985

recA-independent recombination between repeated IS50 elements is not caused by an IS50-encoded function.

Certain pBR322-related plasmids containing direct repeats of the insertion element IS50 appear to be unstable in recA Escherichia coli because smaller recombinant derivatives accumulate rapidly in plasmid DNA populations. We show here that (i) this instability is plasmid specific, but not IS50 specific; (ii) it is due to a detrimental effect exerted by these plasmids on bacterial growth; and (iii) the growth impairment is alleviated in cells harboring the smaller recombinant plasmids. Although a recent report had concluded that accumulation of recombinants reflected an IS50-specific recombination function, when correction is made for the relative growth rates of cells containing the parental and recombinant plasmids the evidence for such a recombination function disappears.

DNA Transposable Elements↗
PubMed1984

Transcriptional control of IS1 transposition in Escherichia coli.

The movement of the bacterial insertion sequence IS1 often generates cointegrate structures in which donor and target replicons are connected by direct repeats of IS1. The experiments reported here were designed to understand how IS1 transposition is controlled. Our physical characterization of the structures of cointegrates between an F factor ( pOX38 ) and a set of pBR322::Tn9-related plasmids indicate that the relative mobilities of the two IS1 elements of Tn9 are inversely correlated with the strength of promoters upstream in the vector DNA. This implies that transcription across the ends of an IS1 element inhibits its transposition. Transcriptional inhibition may be due to interference with either the synthesis or the action of transposase.

DNA Replication↗
PubMed1984

Accessory DNAs in the bacterial gene pool: playground for coevolution.

Chemostat studies of bacteria that harbour the prokaryotic transposable elements Tn5 and Tn10 and the temperate phages lambda, Mu, P1 and P2 have shown that these accessory DNA elements confer a selective advantage on their hosts. We propose that similar selective effects provided the initial impetus for the evolution of nascent accessory DNA elements in primitive bacterial populations. In subsequent evolution the elements acquired or perfected the 'selfish' characteristics of over-replication and horizontal transmission. Such selfish traits led to the dissemination of accessory DNAs among commensal strains, species and genera, genetically interconnecting them to create a 'commonwealth' of species that potentially share a common gene pool. The involvement of accessory DNAs in genetic exchange provides selection at the population level for refinement and diversification of the elements and for regulation of their replication, transposition and transfer among cells. The diversity of intracellular environments encountered by the elements imposes constraints on their evolution while at the same time altering the selection pressures operating on conventional chromosomal genes. This process of coevolution of accessory DNAs with the genomes of their diverse hosts has led to a unique population structure and mechanism of genetic exchange among bacteria, which constitutes the most effective adaptive strategy yet devised by selection.

Adaptation, Biological↗
PubMed1984

Mechanism of IS1 transposition in E. coli: choice between simple insertion and cointegration.

Insertion element IS1 and IS1-based transposon Tn9 generate cointegrates (containing vector and target DNAs joined by duplicate copies of IS1 or Tn9) and simple insertions (containing IS1 or Tn9 detached from vector sequences). Based on studies of transposon Tn5 we had proposed a conservative (non-replicative) model for simple insertion. Others had proposed that all transposition is replicative, occurring in a rolling circle structure, and that the way DNA strands are joined when replication terminates determines whether a simple insertion or a cointegrate is formed.--We selected for the transposition of amp and cam resistance markers from pBR322::Tn9 plasmids to an F factor in recA-E. coli and identified products containing three and four copies of IS1, corresponding to true cointegrates (from monomeric plasmids), and simple insertions (from dimeric plasmids). The simple insertions with four copies of IS1 outnumbered those with three by a ratio of about 3:1, whereas true cointegrates containing three copies of IS1 were more numerous than those with four.--A straightforward rolling circle model had predicted that the simple insertions containing three copies of IS1 should be more frequent than those with four. Because we obtained the opposite result we propose that simple insertions only arise when the element fails to replicate or if replication starts but then terminates prematurely. The two classes of products, simple insertions and cointegrates, reflect alternative conservative and replicative fates, respectively, of an early intermediate in transposition.

Bacterial Proteins↗
PubMed1984

Bacterial transposon Tn5: evolutionary inferences.

Transposable elements induce spontaneous mutations, promote genome rearrangements, regulate gene expression, and participate in the horizontal spread of genes encoding traits such as antibiotic resistance among bacterial genera too distantly related to undergo homologous recombination. Here we review the bacterial transposon Tn5 and focus on those aspects of its functional organization and transposition which provide insights into how it and other elements may have arisen, proliferated, and evolved.

Biological Evolution↗
PubMed1983

Mechanism of F factor-enhanced excision of transposon Tn5.

The reversion of lac:: Tn5 insertion mutations was used to examine the control of excision of the kanamycin-resistance transposon Tn5 in Escherichia coli. Earlier work which showed that the fertility factor F enhances Tn5 excision had led another group to suggest that this is due to the product of a putative transposable element-specific "recombination" gene in the F factor which can act on Tn5 located anywhere in the genome. We show, however, that Tn5 is excised from sites in the lac operon of F'lac plasmids several orders of magnitude more efficiently than from the same sites in the chromosomes of F-, F+ or homozygous lac:: Tn5[F'lac:: Tn5] strains. Thus F enhances Tn5 excision, but only if F and Tn5 are in cis in the same DNA molecule. Bacterial crosses showed that transfer of F'lac:: Tn5 plasmids by conjugation stimulates Tn5 excision, and that transfer is frequent even within F' populations. These results suggest that the ability of F to enhance excision is the consequence of DNA transfer in conjugation.

Conjugation, Genetic↗
PubMed1983

Sequences essential for transposition at the termini of IS50.

The DNA sequences found repeated in opposite orientation at the ends of insertion (IS) elements are thought to contain sites at which transposase proteins act during transposition. Many elements have repeats of at least 15 base pairs (bp). Those of IS50 are quite short, however: just 8 of the first 9 bp. Functional tests had indicated that one end of IS50 is more effective in transposition than the other end and suggested that at least one of the recognition sites of IS50 extends beyond the common 8/9 bp. To determine the lengths of recognition sites of IS50 we mutagenized IS50 in vitro and tested the transposition proficiency of the resulting mutants. Our results show that the recognition sites at each end of IS50 are about 19 bp long. These findings suggest models for the evolution of IS elements from simpler immobile gene complexes.

Base Composition↗
PubMed1983

Structural requirement for IS50-mediated gene transposition.

Replicative transposition is signaled by the formation of cointegrates in which donor and target replicons are joined by direct repeats of a transposable element. Elements not generating such cointegrates may move by a conservative breaking and joining process. The IS50 elements forming the terminal repeats of Tn5 [which carries the determinant for kanamycin resistance (Kanr)] contain genes and sites necessary for transposition and mediate the movement of any DNA segment they bracket. To determine if IS50 generates cointegrates, the products of transposition from pBR322::Tn5 plasmids to an F factor in recA-Escherichia coli were examined. With monomeric pBR322::Tn5 plasmids, transposition of Kanr (from Tn5) was generally not accompanied by movement of the determinant for ampicillin resistance (Ampr) (from the pBR322 vector). With dimeric pBR322::Tn5 plasmids, by contrast, half of the transpositions of kanr were accompanied by transposition of ampr. Restriction endonuclease analyses indicated that these F-Kanr Ampr chimeras contained inserts of a single copy of the pBR322 vector sequence bracketed by one Tn5 element and one IS50 element or by a pair of Tn5 elements. None of 79 chimeras tested was a true cointegrate. Because IS50 seems to move only a segment of the donor replicon it is proposed that IS50 transposition is conservative.

DNA Replication↗
PubMed1983

A product of the TN5 transposase gene inhibits transposition.

The bacterial transposon Tn5 possesses a regulatory mechanism that allows it to move with higher efficiency when it is first introduced into a cell than after it is established. Tn5 is a composite transposable element containing inverted repeats of two nearly identical elements, IS50R, which encodes the transposase protein necessary for Tn5 movement, and IS50L which contains an ochre mutant allele of the transposase gene. Data presented here show that Tn5 transposition is inhibited about 50-fold in cells of Escherichia coli which already carry IS50R in the multicopy plasmid pBR322. If the cells contain a plasmid carrying either IS50L instead of IS50R, or derivatives of IS50R in which the transposase gene has been mutated, little if any inhibition of Tn5 transposition is found. Although inhibition had previously been hypothesized to require interaction between the products of IS50L and IS50R, our results show that IS50R alone is sufficient to mediate inhibition and suggest that the inhibitor is a product of the transposase gene itself.

Bacteriophage lambda↗
PubMed1983

Transductional instability of Tn5-induced mutations: generalized and specialized transduction of Tn5 by bacteriophage P1.

Generalized transduction is commonly used to move transposon-induced mutations among bacterial strains by selecting for inheritance of a transposon-encoded resistance determinant. Although complete cotransduction of the resistance determinant and the chromosomal mutation might be expected, it is often found that when Tn5(Kan) insertion mutations are transduced by bacteriophage P1 most of the nonmutant kanamycin-resistant transductants area due to specialized transduction of Tn5. Such P1::Tn5 specialized transducing phage are not found when a mutant Tn5 element lacking a functional transposase is employed.

Coliphages↗
PubMed1983

Specificity of transposon Tn5 insertion.

Genetic mapping studies had shown that the bacterial transposon Tn5 can insert into many sites in a gene, but that some sites are preferred. To begin understanding Tn5's insertion specificity at the molecular level, we selected transpositions of Tn5 from the Escherichia coli chromosome to the plasmid pBR322 and analyzed the resultant pBR322::Tn5 plasmids by restriction endonuclease digestion and DNA sequencing. Seventy-five insertions in the tet gene were found at 28 sites including one major hotspot (with 21 insertions) and four lesser hotspots (with four to ten insertions each). All five hotspots are within the first 300 of the 1250-base pair (bp) tet gene. In contrast, 31 independent insertions in the amp gene were found in at least 27 distinct sites.--Tn5 generates 9 bp target sequence duplications when it transposes. Such transposon-induced duplications are generally taken to indicate that cleavages of complementary target DNA strands are made 9 bp apart during transposition. DNA sequence analysis indicated that GC base pairs occupy positions 1 and 9 in the duplications at each of the five hotspots examined, suggesting a GC-cutting preference during Tn5 transposition.

Base Sequence↗