Biomedical subjects

Csaba Magyar

Publications and source records attributed to Csaba Magyar.

9 recordsLinked to original sources

PubMed2006

Phosphorylation-induced transient intrinsic structure in the kinase-inducible domain of CREB facilitates its recognition by the KIX domain of CBP.

Phosphorylation at Ser-133 of the kinase inducible domain of CREB (KID) triggers its binding to the KIX domain of CBP via a concomitant coil-to-helix transition. The exact role of this key event is still puzzling: it does not switch between disordered and ordered states, nor its direct interactions fully account for selectivity. Hence, we reasoned that phosphorylation may shift the conformational preferences of KID towards a binding-competent state. To this end we investigated the intrinsic structural properties of the unbound KID in phosphorylated and unphosphorylated forms by simulated annealing and molecular dynamics simulations. Although helical populations show subtle differences, phosphorylation reduces the flexibility of the turn segment connecting the two helices in the complexed structure and induces a transient structural element that corresponds to its bound conformation. It is stabilized by the pSer-133-Arg-131 interaction, which is absent from the unphosphorylated KID. Diminishing this coupling decreases the 3.1 kcal/mol contribution of pSer-133 to the binding free energy (DeltaGbind) of the phosphorylated KID to KIX by 1.1 kcal/mol, as computed in reference to Ser-133. In a binding competent form of the S133E KID mutant, the contribution of Glu-133 to DeltaGbind is by 1.5 kcal/mol smaller than that of pSer, suggesting that altered structural properties due to pSer --> Glu replacement impair the binding affinity. Thus, we propose that phoshorylation contributes to selectivity not merely by the direct interactions of the phosphate group with KIX, but also by promoting the formation of a transient structural element in the highly conserved turn segment.

Amino Acid Sequence↗

PubMed2005

Flexibility of prolyl oligopeptidase: molecular dynamics and molecular framework analysis of the potential substrate pathways.

The flexibility of prolyl oligopeptidase has been investigated using molecular dynamics (MD) and molecular framework approaches to delineate the route of the substrate to the active site. The selectivity of the enzyme is mediated by a seven-bladed beta-propeller that in the crystal structure does not indicate the possible passage for the substrate to the catalytic center. Its open topology however, could allow the blades to move apart and let the substrate into the large central cavity. Flexibility analysis of prolyl oligopeptidase structure using the FIRST (Floppy Inclusion and Rigid Substructure Topology) approach and the atomic fluctuations derived from MD simulations demonstrated the rigidity of the propeller domain, which does not permit the substrate to approach the active site through this domain. Instead, a smaller tunnel at the inter-domain region comprising the highly flexible N-terminal segment of the peptidase domain and a facing hydrophilic loop from the propeller (residues 192-205) was identified by cross-correlation analysis and essential dynamics as the only potential pathway for the substrate. The functional importance of the flexible loop has been also verified by kinetic analysis of the enzyme with a split loop. Catalytic effect of engineered disulfide bridges was rationalized by characterizing the concerted motions of the two domains.

Animals↗

PubMed2005

SRide: a server for identifying stabilizing residues in proteins.

Residues expected to play key roles in the stabilization of proteins [stabilizing residues (SRs)] are selected by combining several methods based mainly on the interactions of a given residue with its spatial, rather than its sequential neighborhood and by considering the evolutionary conservation of the residues. A residue is selected as a stabilizing residue if it has high surrounding hydrophobicity, high long-range order, high conservation score and if it belongs to a stabilization center. The definition of all these parameters and the thresholds used to identify the SRs are discussed in detail. The algorithm for identifying SRs was originally developed for TIM-barrel proteins [M. M. Gromiha, G. Pujadas, C. Magyar, S. Selvaraj, and I. Simon (2004), Proteins, 55, 316-329] and is now generalized for all proteins of known 3D structure. SRs could be applied in protein engineering and homology modeling and could also help to explain certain folds with significant stability. The SRide server is located at http://sride.enzim.hu.

Amino Acids↗

PubMed2004

Functionally and structurally relevant residues of enzymes: are they segregated or overlapping?

There is a delicate balance between stability and flexibility needed for enzyme function. To avoid undesirable alteration of the functional properties during the evolutionary optimization of the structural stability under certain circumstances, and vice versa, to avoid unwanted changes of stability during the optimization of the functional properties of proteins, common sense would suggest that parts of the protein structure responsible for stability and parts responsible for function developed and evolved separately. This study shows that nature did not follow this anthropomorphic logic: the set of residues involved in function and those involved in structural stabilization of enzymes are rather overlapping than segregated.

Amino Acids↗

PubMed2004

Locating the stabilizing residues in (alpha/beta)8 barrel proteins based on hydrophobicity, long-range interactions, and sequence conservation.

In nature, 1 out of every 10 proteins has an (alpha/beta)(8) (TIM)-barrel fold, and in most cases, pairwise comparisons show no sequence similarity between them. Hence, delineating the key residues that induce very different sequences to share a common fold is important for understanding the folding and stability of TIM-barrel domains. In this work, we propose a new consensus approach for locating these stabilizing residues based on long-range interactions, hydrophobicity, and conservation of amino acid residues. We have identified 957 stabilizing residues in 63 proteins from a nonredundant set of 71 TIM-barrel domains. Most of these residues are located in the 8-stranded beta-sheet, with nearly one half of them oriented toward the interior of the barrel and the other half oriented toward the surrounding alpha-helices. Several stabilizing residues are found in the N- and C-terminal loops, whereas very few appear in the alpha-helices that surround the internal beta-sheet. Further, these 957 residues are placed in 434 stabilizing segments of various sizes, and each domain contains 1-10 of these segments. We found that 8 segments per domain is the most abundant one, and two thirds of the proteins have 7-9 stabilizing segments. Finally, we verified the identified residues with experimental temperature factors and found that these residues are among the ones with less mobility in the considered proteins. We suggest that our new protocol serves as a powerful tool to identify the stabilizing residues in TIM-barrel domains, which can be used as potential candidates for studying protein folding and stability by means of protein engineering experiments.

Conserved Sequence↗

PubMed2003

Servers for sequence-structure relationship analysis and prediction.

We describe several algorithms and public servers that were developed to analyze and predict various features of protein structures. These servers provide information about the covalent state of cysteine (CYSREDOX), as well as about residues involved in non-covalent cross links that play an important role in the structural stability of proteins (SCIDE and SCPRED). We also discuss methods and servers developed to identify helical transmembrane proteins from large databases and rough genomic data, including two of the most popular transmembrane prediction methods, DAS and HMMTOP. Several biologically interesting applications of these servers are also presented. The servers are available through http://www.enzim.hu/servers.html.

Algorithms↗

PubMed2003

SCide: identification of stabilization centers in proteins.

SUMMARY: SCide is a program to identify stabilization centers from known protein structures. These are residues involved in cooperative long-range contacts, which can be formed between various regions of a single polypeptide chain, or they can belong to different peptides or polypeptides in a complex. The server takes a PDB file as an input, and the result is presented in graphical or text format. AVAILABILITY: SCide is available on the web at http://www.enzim.hu/scide. The source code can be obtained from the authors on request.

Amino Acid Sequence↗

PubMed2002

Increasing the thermal stability of cellulase C using rules learned from thermophilic proteins: a pilot study.

Some structural features underlying the increased thermostability of enzymes from thermophilic organisms relative to their homologues from mesophiles are known from earlier studies. We used cellulase C from Clostridium thermocellum to test whether thermostability can be increased by mutations designed using rules learned from thermophilic proteins. Cellulase C has a TIM barrel fold with an additional helical subdomain. We designed and produced a number of mutants with the aim to increase its thermostability. Five mutants were designed to create new electrostatic interactions. They all retained catalytic activity but exhibited decreased thermostability relative to the wild-type enzyme. Here, the stabilizing contributions are obviously smaller than the destabilization caused by the introduction of the new side chains. In another mutant, the small helical subdomain was deleted. This mutant lost activity but its melting point was only 3 degrees C lower than that of the wild-type enzyme, which suggests that the subdomain is an independent folding unit and is important for catalytic function. A double mutant was designed to introduce a new disulfide bridge into the enzyme. This mutant is active and has an increased stability (deltaT(m)=3 degrees C, delta(deltaG(u))=1.73 kcal/mol) relative to the wild-type enzyme. Reduction of the disulfide bridge results in destabilization and an altered thermal denaturation behavior. We conclude that rules learned from thermophilic proteins cannot be used in a straightforward way to increase the thermostability of a protein. Creating a crosslink such as a disulfide bond is a relatively sure-fire method but the stabilization may be smaller than calculated due to coupled destabilizing effects.

Calorimetry, Differential Scanning↗

PubMedDate not supplied

Noncovalent cross-links in context with other structural and functional elements of proteins.

Proteins are heteropolymers with evolutionary selected native sequences of residues. These native sequences code for unique and stable 3D structures indispensable for biochemical activity and for proteolysis resistance, the latter which guarantees an appropriate lifetime for the protein in the protease rich cellular environment. Cross-links between residues close in space but far in the primary structure are required to maintain the folded structure of proteins. Some of these cross-links are covalent, most frequently disulfide bonds, but the majority of the cross-links are sets of cooperative noncovalent long-range interactions. In this paper we focus on special clusters of noncovalent long-range interactions: the Stabilization Centers (SCs). The relation between the SCs and secondary structural elements as well as the relation between SCs and functionally important regions of proteins are presented to show a detailed picture of these clusters, which are believed to be primarily responsible for major aspects of protein stability.

Cross-Linking Reagents↗