Search PubMed⌕ Search

Biomedical subjects

Clarissa Consolandi

Publications and source records attributed to Clarissa Consolandi.

12 recordsLinked to original sources
PubMed2006

Polymerase chain reaction of 2-kb cyanobacterial gene and human anti-alpha1-chymotrypsin gene from genomic DNA on the In-Check single-use microfabricated silicon chip.

The microfabricated chip is a promising format for automating and miniaturizing the multiple steps of genotyping. We tested an innovative silicon biochip (In-Check Lab-on-Chip; STMicroelectronics, Agrate Brianza, Italy) designed for polymerase chain reaction (PCR) analysis of complex biological samples. The chip is mounted on a 1x3-in(2). plastic slide that provides the necessary mechanical, thermal, electrical, and fluidic connections. A temperature control system drives the chip to the desired temperatures, and a graphical user interface allows experimenters to define cycling conditions and monitor reactions in real time. During thermal cycling, we recorded a cooling rate of 3.2 degrees C/s and a heating rate of 11 degrees C/s. The temperature maintained at each thermal plateau was within 0.13 degrees C of the programmed temperature at three sensors. From 0.5 ng/microl genomic DNA, the In-Check device successfully amplified the 2060-bp cyanobacterial 16S rRNA gene and the 330-bp human anti-alpha(1)-chymotrypsin gene. The shortest PCR protocol that produced an amplicon by capillary electrophoresis comprised 30 cycles and was 22.5 min long. These thermal cycling characteristics suggest that the In-Check device will permit future development of a genotyping lab-on-a-chip device, yielding results in a short time from a limited amount of biological starting material.

Cyanobacteria↗
PubMed2006

Application of the Taguchi method to the analysis of the deposition step in microarray production.

Every microarray experiment is affected by many possible sources of variability that may even corrupt biological evidence on analyzed sequences. We applied a "Taguchi method" strategy, based on the use of orthogonal arrays to optimize the deposition step of oligonucleotide sequences on glass slides. We chose three critical deposition parameters (humidity, surface, and buffer) at two levels each, in order to establish optimum settings. A L8 orthogonal array was used in order to monitor both the main effects and interactions on the deposition of a 25 mer oligonucleotide hybridized to its fluorescent-labeled complementary. Signal-background ratio and deposition homogeneity in terms of mean intensity and spot diameter were considered as significant outputs. An analysis of variance (ANOVA) was applied to raw data and to mean results for each slide and experimental run. Finally we calculated an overall evaluation coefficient to group together important outputs in one number. Environmental humidity and surface-buffer interaction were recognized as the most critical factors, for which a 50% humidity, associated to a chitosan-covered slide and a sodium phosphate + 25% dimethyl sulfoxide (DMSO) buffer gave best performances. Our results also suggested that Taguchi methods can be efficiently applied in optimization of microarray procedures.

Algorithms↗
PubMed2004

Detection of genetically modified soybean using peptide nucleic acids (PNAs) and microarray technology.

Peptide nucleic acid (PNA) microarrays for the detection of Roundup Ready soybeans in food have been prepared. PNA probes are known to be more efficient and selective in binding DNA sequences than the analogous oligonucleotides and are very suitable to be used for diagnostics in food. PNAs of different lengths were carefully designed and synthesized by solid-phase synthesis on an automatic synthesizer adopting the BOC strategy. PNAs were purified by HPLC and characterized by HPLC/MS. The probes were spotted on a functionalized surface to produce a microarray to be hybridized with PCR products. DNA extracted from reference material was amplified using Cy3- and Cy5-labeled primers, and the fluorescent PCR products obtained were hybridized on the microarray. Two protocols were adopted: the hybridization with dsDNA or with ssDNA obtained by digestion with the enzyme lambda exonuclease. The best results were obtained using a 15-mer PNA probe in combination with the ssPCR product derived from enzymatic digestion. The method was applied to the analysis of a sample of certified transgenic soybean flour.

DNA, Plant↗
PubMed2004

Detection and quantitation of genetically modified maize (Bt-176 transgenic maize) by applying ligation detection reaction and universal array technology.

We have applied the ligation detection reaction (LDR) combined with a universal array approach to the detection and quantitation of the polymerase chain reaction (PCR) amplified cry1A(b) gene from Bt-176 transgenic maize. We demonstrated excellent specificity and high sensitivity. Down to 0.5 fmol (nearly 60 pg) of PCR amplified transgenic material was unequivocally detected with excellent linearity within the 0.1-2.0% range with respect to wild-type maize. We suggest the feasibility of extending the LDR/universal array format to detect in parallel several transgenic sequences that are being developed for food applications.

Bacillus thuringiensis Toxins↗
PubMed2004

Polymorphism analysis within the HLA-A locus by universal oligonucleotide array.

Human leukocyte antigen (HLA) class I genes present some of the most complex single nucleotide polymorphism (SNP) patterns in the human genome. HLA typing is therefore extremely challenging. In this article, we use the ligation detection reaction (LDR) combined with a universal array (UA) as a robust and efficient method to analyze SNPs within the HLA-A region that includes HLA-A alleles of interest for immunotherapy in tumor diseases. The LDR, combined with a UA platform, has been optimized for the detection of 27 alleles distributed within exons 2 and 3 of HLA-A. The assay involves the amplification by PCR of the HLA-A genomic region (1,900 bp), the cycled ligation reaction, followed by the capture of ligated products through hybridization onto a UA. Each slide was designed to allow the detection of up to eight samples in parallel. The PCR/LDR/UA HLA-A assay was evaluated by analyzing 62 individuals (31 homozygous and 31 heterozygous) previously typed by direct sequencing. We demonstrate that the microarray genotyping procedure described here is a robust and efficient method for unambiguous detection of HLA alleles. HLA genotyping by PCR/LDR/UA is in perfect agreement with typing obtained by direct sequencing. Our results clearly demonstrate that the combination of enzymatic processing (LDR) and a demultiplexing hybridization onto a UA is a robust tool for SNP discrimination within the highly polymorphic HLA region. We demonstrate the specificity and efficiency of such an approach, suggesting the feasibility of a PCR/LDR/UA low resolution HLA typing procedure.

Alleles↗
PubMed2004

Development of a universal microarray based on the ligation detection reaction and 16S rrna gene polymorphism to target diversity of cyanobacteria.

The cyanobacteria are photosynthetic prokaryotes of significant ecological and biotechnological interest, since they strongly contribute to primary production and are a rich source of bioactive compounds. In eutrophic fresh and brackish waters, their mass occurrences (water blooms) are often toxic and constitute a high potential risk for human health. Therefore, rapid and reliable identification of cyanobacterial species in complex environmental samples is important. Here we describe the development and validation of a microarray for the identification of cyanobacteria in aquatic environments. Our approach is based on the use of a ligation detection reaction coupled to a universal array. Probes were designed for detecting 19 cyanobacterial groups including Anabaena/Aphanizomenon, Calothrix, Cylindrospermopsis, Cylindrospermum, Gloeothece, halotolerants, Leptolyngbya, Palau Lyngbya, Microcystis, Nodularia, Nostoc, Planktothrix, Antarctic Phormidium, Prochlorococcus, Spirulina, Synechococcus, Synechocystis, Trichodesmium, and Woronichinia. These groups were identified based on an alignment of over 300 cyanobacterial 16S rRNA sequences. For validation of the microarrays, 95 samples (24 axenic strains from culture collections, 27 isolated strains, and 44 cloned fragments recovered from environmental samples) were tested. The results demonstrated a high discriminative power and sensitivity to 1 fmol of the PCR-amplified 16S rRNA gene. Accurate identification of target strains was also achieved with unbalanced mixes of PCR amplicons from different cyanobacteria and an environmental sample. Our universal array method shows great potential for rapid and reliable identification of cyanobacteria. It can be easily adapted to future development and could thus be applied both in research and environmental monitoring.

Bacterial Typing Techniques↗
PubMed2003

Detection of HLA polymorphisms by ligase detection reaction and a universal array format: a pilot study for low resolution genotyping.

We present our results in the identification of polymorphic sites within the second exon of the human leukocyte antigen A (HLA-A) region using the DNA microarray technology. Allele specific detection was performed by polymerase chain reaction followed by ligase detection reaction (LDR) in combination with a universal array, a powerful method for high throughput DNA sequence analysis. By this approach we confirmed 32 human samples previously characterized by direct DNA sequencing, thus demonstrating the interest of this approach.

DNA Ligases↗
PubMed2002

Bacterial discrimination by means of a universal array approach mediated by LDR (ligase detection reaction).

BACKGROUND: PCR amplification of bacterial 16S rRNA genes provides the most comprehensive and flexible means of sampling bacterial communities. Sequence analysis of these cloned fragments can provide a qualitative and quantitative insight of the microbial population under scrutiny although this approach is not suited to large-scale screenings. Other methods, such as denaturing gradient gel electrophoresis, heteroduplex or terminal restriction fragment analysis are rapid and therefore amenable to field-scale experiments. A very recent addition to these analytical tools is represented by microarray technology. RESULTS: Here we present our results using a Universal DNA Microarray approach as an analytical tool for bacterial discrimination. The proposed procedure is based on the properties of the DNA ligation reaction and requires the design of two probes specific for each target sequence. One oligo carries a fluorescent label and the other a unique sequence (cZipCode or complementary ZipCode) which identifies a ligation product. Ligated fragments, obtained in presence of a proper template (a PCR amplified fragment of the 16s rRNA gene) contain either the fluorescent label or the unique sequence and therefore are addressed to the location on the microarray where the ZipCode sequence has been spotted. Such an array is therefore "Universal" being unrelated to a specific molecular analysis. Here we present the design of probes specific for some groups of bacteria and their application to bacterial diagnostics. CONCLUSIONS: The combined use of selective probes, ligation reaction and the Universal Array approach yielded an analytical procedure with a good power of discrimination among bacteria.

Bacteria↗
PubMed2002

Investigation of the multiple anchors approach in oligonucleotide microarray preparation using linear and stem-loop structured probes.

Enzyme-mediated reactions are a useful tool in mutation detection when using a microarray format. Discriminating probes attached to the surface of a DNA chip have to be accessible to target DNA and to the enzyme (ligase or polymerase) that catalyses the formation of a new phosphodiester bond. This requires an appropriate chemical platform. Recently, an oligonucleotide hairpin architecture incorporating multiple phosphorothioate moieties along the loop has been proposed as an effective approach to solid-phase minisequencing. We have explored in depth several variables (stem length, number of phosphorothioates, stem-loop architecture versus linear structure) involved in this strategy by using a solid-phase ligation reaction. Microarrays were fabricated either from aminosilyl-modified glass or from aminated polymeric surfaces made of poly-lysine. Both platforms were bromoacetylated and reacted with thiophosphorylated oligonucleotides. The resulting microarrays were tested using either a synthetic template or a PCR-amplified 16S rRNA genomic region as the target sequence. Our results confirm the robustness of the proposed chemistry. We extend its range of application to solid-phase ligation, demonstrating the effectiveness of multiple anchors and suggest that linear oligonucleotides incorporating multiple phosphorothioates are equivalent to their hairpin-structured counterparts.

Base Sequence↗
PubMed2002

Two efficient polymeric chemical platforms for oligonucleotide microarray preparation.

In this report we describe two robust procedures for oligonucleotide microarray preparation based on polymeric coatings. The proposed chemical approaches include: 1) a glass functionalisation step with appropriate silanes (gamma-aminopropyltriethoxysilane-APTES or 3-glycidoxypropyltrimethoxysilane-GOPS), 2) a coating step using polymers (poly-L-Lysine or poly(acrylic acid-co-acrylamide) copolymer) covalently bound to the modified glass and 3) a surface activation step to allow for the attachment of amino-modified oligonucleotides. Results obtained using these chemistries in oligo microarray preparation show: 1) an overall high loading capacity and availability to hybridisation against targets, 2) a good uniformity, 3) resistance to consecutive probing/ stripping cycles, 4) stability to thermal cycles, 5) effectiveness in hybridisation-mediated mutation detection procedures and 6) the possibility to perform enzymatic reactions, such as ligation.

Acrylamides↗
PubMedDate not supplied

A structured chitosan-based platform for biomolecule attachment to solid surfaces: application to DNA microarray preparation.

A structured chemical platform based on chitosan, an amine-rich polysaccharide, is presented as an alternative chemistry to functionalize solid support (in this case, glass slides) for grafting biomolecules. This approach has been adopted for generating arrays using amino-modified oligonucleotides with two different lengths (25-mer and 70-mer) for different purposes. Results using these chitosan-activated surfaces indicate high oligonucleotide loading capacity, good availability to hybridization against targets, and effectiveness in enzyme-mediated single nucleotide polymorphism (SNP) detection procedures by DNA polymerase and DNA ligase enzymes with low background. Universal arrays have been prepared and extensively used with excellent results in different applications. The chitosan-treated surfaces were also evaluated for their performance in a gene expression experiment.

Chitosan↗