Search PubMed⌕ Search

Biomedical subjects

Christopher S Chen

Publications and source records attributed to Christopher S Chen.

8 recordsLinked to original sources
PubMed2003

Repositioning of cells by mechanotaxis on surfaces with micropatterned Young's modulus.

Adherent cells are strongly influenced by the mechanical aspects of biomaterials, but little is known about the cellular effects of spatial variations in these properties. This work describes a novel method to produce polymeric cell culture surfaces containing micrometer-scale regions of variable stiffness. Substrates made of acrylamide or poly(dimethylsiloxane) were patterned with 100- or 10-microm resolution, respectively. Cells were cultured on fibronectin-coated acrylamide having Young's moduli of 34 kPa and 1.8 kPa, or fibronectin-coated PDMS having moduli of 2.5 MPa and 12 kPa. Over several days, NIH/3T3 cells and bovine pulmonary arterial endothelial cells accumulated preferentially on stiffer regions of substrates. The migration, not proliferation, of cells in response to mechanical patterning (mechanotaxis) was responsible for the accumulation of cells on stiffer regions. Differential remodeling of extracellular matrix protein on stiff versus compliant regions was observed by immunofluorescence staining, and may have been responsible for the observed mechanotaxis. These results suggest that mechanically patterned substrates might provide a general means to study mechanotaxis, and a new approach to patterning cells.

Acrylamide↗
PubMed2003

Cell shape provides global control of focal adhesion assembly.

Cell spreading was controlled independently of the amount and density of immobilized integrin ligand by culturing cells on single adhesive islands of different sizes (100-2500 microm(2)) and shapes (squares, circles, and lines) or on many smaller (3-5 microm diameter) circular islands that were coated with a saturating density of fibronectin and separated by non-adhesive regions. The amount of focal adhesions (FAs) containing vinculin and phosphotyrosine increased in direct proportion to cell spreading under all conditions. FAs localized asymmetrically along the periphery of the small islands that experienced highest tensional stress, and FA staining increased when cytoskeletal tension was stimulated with thrombin, whereas inhibitors of contractility promoted FA disassembly. Thus, these findings demonstrate the existence of an "inside-out" mechanism whereby global cell distortion produces increases in cytoskeletal tension that feed back to drive local changes in FA assembly. This complex interplay between cell morphology, mechanics, and adhesion may be critical to how cells integrate from and function in living tissues.

Actins↗
PubMed2003

VE-cadherin simultaneously stimulates and inhibits cell proliferation by altering cytoskeletal structure and tension.

Engagement of vascular endothelial (VE)-cadherin leads to the cessation of proliferation commonly known as 'contact inhibition'. We show that VE-cadherin inhibits growth by mediating changes in cell adhesion to the extracellular matrix. Increasing cell-cell contact decreased cell spreading and proliferation, which was reversed by blocking engagement of VE-cadherin. Using a new system to prevent the cadherin-induced changes in cell spreading, we revealed that VE-cadherin paradoxically increased proliferation. Treating cells with inhibitors of PKC and MEK abrogated the stimulatory signal at concentrations that disrupted the formation of actin fibers across the cell-cell contact. Directly disrupting actin fibers, blocking actin-myosin-generated tension, or inhibiting signaling through Rho specifically inhibited the cadherin-induced proliferative signal. By progressively altering the degree to which cell-cell contact inhibited cell spreading, we show that cell-cell contact ultimately increased or decreased the overall proliferation rate of the population by differentially shifting the balance between the two opposing proliferative cues. The existence of opposing growth signals induced by VE-cadherin that are both mediated through crosstalk with cytoskeletal structure highlights the complex interplay of mechanical and chemical signals with which cells navigate in their physical microenvironment.

Actins↗
PubMed2003

Cells lying on a bed of microneedles: an approach to isolate mechanical force.

We describe an approach to manipulate and measure mechanical interactions between cells and their underlying substrates by using microfabricated arrays of elastomeric, microneedle-like posts. By controlling the geometry of the posts, we varied the compliance of the substrate while holding other surface properties constant. Cells attached to, spread across, and deflected multiple posts. The deflections of the posts occurred independently of neighboring posts and, therefore, directly reported the subcellular distribution of traction forces. We report two classes of force-supporting adhesions that exhibit distinct force-size relationships. Force increased with size of adhesions for adhesions larger than 1 microm(2), whereas no such correlation existed for smaller adhesions. By controlling cell adhesion on these micromechanical sensors, we showed that cell morphology regulates the magnitude of traction force generated by cells. Cells that were prevented from spreading and flattening against the substrate did not contract in response to stimulation by serum or lysophosphatidic acid, whereas spread cells did. Contractility in the unspread cells was rescued by expression of constitutively active RhoA. Together, these findings demonstrate a coordination of biochemical and mechanical signals to regulate cell adhesion and mechanics, and they introduce the use of arrays of mechanically isolated sensors to manipulate and measure the mechanical interactions of cells.

3T3 Cells↗
PubMed2002

Engineering cellular microenvironments to improve cell-based drug testing.

Recent progress in the biology of cell adhesion is enabling cell culture models to better reproduce in vivo functions. Cues from adhesion to extracellular matrix and neighboring cells are important regulators of cell behaviors. The recent adaptation of semiconductor tools to spatially organize cells and their adhesions has enhanced our ability to engineer cell functions ex vivo. By using these tools to create more in vivo-like cultures, cell-based drug discovery and target validation could be improved. This review explores the biological advances made by these microfabrication tools and discusses how they could enable high-throughput cell-based assays.

Animals↗
PubMed2002

Cell-cell signaling by direct contact increases cell proliferation via a PI3K-dependent signal.

We report a novel mechanism of cellular growth control. Increasing the density of endothelial or smooth muscle cells in culture increased cell-cell contact and decreased cell spreading, leading to growth arrest. Using a new method to independently control cell-cell contact and cell spreading, we found that introducing cell-cell contact positively regulates proliferation, but that contact-mediated proliferation can be masked by changes in cell spreading: Round cells with many contacts proliferated less than spread cells with none. Physically blocking cell-cell contact or inhibiting PI3K signaling abrogated cell-cell induced proliferation, but inhibiting diffusible paracrine signaling did not. Thus, direct cell-cell contact induces proliferation in these cells.

Animals↗
PubMed2002

Fabrication of aligned microstructures with a single elastomeric stamp.

The fabrication of complex patterns of aligned microstructures has required the use of multiple applications of lithography. Here we describe an approach for microfabrication that encodes the two-dimensional spatial information of several photomasks onto a single elastomeric stamp by mapping each photomask onto distinct heights on the surface of the stamp. Pressing the stamp against a surface collapses the topography of the stamp such that each recessed layer contacts the surface in stepwise sequence; the greater the applied pressure, the larger the area of the stamp that contacts the surface. After contact of each new layer with the surface, we use techniques of soft lithography (microcontact printing, microfluidics, and patterning through membranes) to pattern the surfaces that contact the stamp and those that do not with inorganic, organic, or living materials. Microfabrication through the use of multilevel stamps provides a promising alternative to conventional lithography for the construction of multicomponent, aligned surfaces; these structures may find use as components of microfluidic devices or biological patterns.

Animals↗