Search PubMed⌕ Search

Biomedical subjects

Christoph Bräuchle

Publications and source records attributed to Christoph Bräuchle.

12 recordsLinked to original sources
PubMed2006

Double-labelled HIV-1 particles for study of virus-cell interaction.

Human immunodeficiency virus (HIV) delivers its genome to a host cell through fusion of the viral envelope with a cellular membrane. While the viral and cellular proteins involved in entry have been analyzed in detail, the dynamics of virus-cell fusion are largely unknown. Single virus tracing (SVT) provides the unique opportunity to visualize viral particles in real time allowing direct observation of the dynamics of this stochastic process. For this purpose, we developed a double-coloured HIV derivative carrying a green fluorescent label attached to the viral matrix protein combined with a red label fused to the viral Vpr protein designed to distinguish between complete virions and subviral particles lacking MA after membrane fusion. We present here a detailed characterization of this novel tool together with exemplary live cell imaging studies, demonstrating its suitability for real-time analyses of HIV-cell interaction.

Biological Transport↗
PubMed2006

Modified chemistry of siloxanes under tensile stress: interaction with environment.

We present first principles molecular dynamics simulations of stretched siloxane oligomers in an environment representative of that present in single molecule atomic force microscopy experiments. We determine that the solvent used (hexamethyldisiloxane) does not influence the stretching of the siloxane in the high force regime or the rupture process, but trace amounts of water can induce rupture before the maximum siloxane extension has been attained. This would result in a significantly lower rupture force. The simulations show that the rupture of a covalent bond through a reaction with a molecule from the environment, which would not normally occur between the species when the polymer is not stressed, is possible, opening a route to mechanically induced chemical reactions. The attack of the normally hydrophobic siloxane by water when it is stretched has wider implications for the material failure under tensile stress, where trace amounts of water could induce tearing of the material.

Materials Testing↗
PubMed2006

A new photostable terrylene diimide dye for applications in single molecule studies and membrane labeling.

A new terrylene diimide-based dye (WS-TDI) that is soluble in water has been synthesized, and its photophysical properties are characterized. WS-TDI forms nonfluorescing H-aggregates in water that show absorption bands being blue-shifted with respect to those of the fluorescing monomeric form. The ratio of monomeric WS-TDI to aggregated WS-TDI was determined to be 1 in 14 400 from fluorescence correlation spectroscopy (FCS) measurements, suggesting the presence of a large amount of soluble, nonfluorescent aggregates in water. The presence of a surfactant such as Pluronic P123 or CTAB leads to the disruption of the aggregates due to the formation of monomers in micelles. This is accompanied by a strong increase in fluorescence. A single molecule study of WS-TDI in polymeric films of PVA and PMMA reveals excellent photostability with respect to photobleaching, far above the photostability of other common water-soluble dyes, such as oxazine-1, sulforhodamine-B, and a water-soluble perylenediimide derivative. Furthermore, labeling of a single protein such as avidin is demonstrated by FCS and single molecule photostability measurements. The high tendency of WS-TDI to form nonfluorescent aggregates in water in connection with its high affinity to lipophilic environments is used for the fluorescence labeling of lipid membranes and membrane containing compartments such as artificial liposomes or endosomes in living HeLa cells. The superior fluorescence imaging quality of WS-TDI in such applications is demonstrated in comparison to other well-known membrane staining dyes such as Alexa647 conjugated with dextran and FM 4-64 lipophilic styryl dye.

Cell Membrane↗
PubMed2006

A single-molecule Förster resonance energy transfer analysis of fluorescent DNA-protein conjugates for nanobiotechnology.

The development of nanobiotechnological devices requires the ability to build various components with nanometer accuracy. DNA is a well-established nanoscale building block that self assembles due to specific interactions that are encoded in its sequence. Recently, it has become possible to couple proteins to DNA, thereby expanding the capabilities of DNA for use with molecular photonics and bioelectronics. Here, we present the design and characterization of a supramolecular Förster resonance energy transfer (FRET) system by using a fluorescent protein bound to single-stranded DNA (ssDNA), a fluorophore attached to a second ssDNA molecule, and a complementary strand for hybridizing the two fluorophores together. The FRET efficiency was studied by using both ensemble and single-pair FRET measurements. The distance between the two fluorophores was determined from the single-pair FRET efficiency and could be described by a simple cylindrical model for the DNA. Hence, DNA can be used as a scaffold for positioning fluorescent proteins, as well as traditional fluorophores, with nanometer accuracy and shows great potential for use in the future of nanobiotechnology.

Biotechnology↗
PubMed2005

Light-driven unidirectional rotation in a molecule: ROKS simulation.

We present a first-principles molecular dynamics study of the excited-state motion in a molecule that has recently been proven to exhibit light-driven unidirectional rotation. The simulations show that the directed motion is due to the complex excited-state dynamics on ultrashort timescales in the chiral system.

Journal Article↗
PubMed2005

Pulsed interleaved excitation.

In this article, we demonstrate the new method of pulsed interleaved excitation (PIE), which can be used to extend the capabilities of multiple-color fluorescence imaging, fluorescence cross-correlation spectroscopy (FCCS), and single-pair fluorescence resonance energy transfer (spFRET) measurements. In PIE, multiple excitation sources are interleaved such that the fluorescence emission generated from one pulse is complete before the next excitation pulse arrives. Hence, the excitation source for each detected photon is known. Typical repetition rates used for PIE are between approximately 1 and 50 MHz. PIE has many applications in various fluorescence methods. Using PIE, dual-color measurements can be performed with a single detector. In fluorescence imaging with multicolor detection, spectral cross talk can be removed, improving the contrast of the image. Using PIE with FCCS, we can eliminate spectral cross talk, making the method sensitive to weaker interactions. FCCS measurements with complexes that undergo FRET can be analyzed quantitatively. Under specific conditions, the FRET efficiency can be determined directly from the amplitude of the measured correlation functions without any calibration factors. We also show the application of PIE to spFRET measurements, where complexes that have low FRET efficiency can be distinguished from those that do not have an active acceptor.

Biophysics↗
PubMed2005

Restricted open-shell Kohn-Sham theory for pi-pi* transitions. III. Dynamics of aggregates.

We present molecular-dynamics simulations for 1,3-butadiene, 2,3-dimethyl-1,3-butadiene, and cyclopentadiene at finite temperature using periodic boundary conditions. These systems form weakly bound aggregates in the ground state and exhibit bond formation in the excited state. Monomeric excitation of an ensemble of butadiene molecules leads to a transfer of the excitation between two molecules in the excited state with an intermediate delocalization of the wave function over both moieties.

Journal Article↗
PubMed2005

Simultaneous AFM manipulation and fluorescence imaging of single DNA strands.

We report combined atomic force and far-field fluorescence microscopic experiments which allow the simultaneous atomic force manipulation and optical observation of individual dye-labeled DNA molecules. A detailed understanding of the binding properties of DNA to different transparent surfaces is prerequisite for these investigations. Atomic force spectroscopy and fluorescence microscopy of single DNA strands yielded detailed insight into two different types of DNA binding onto transparent polylysine-coated and silanized glass surfaces. We subsequently demonstrate how the different binding can be exploited to perform two types of nanomanipulation experiments: On polylysine, strong electrostatic interactions over the whole length of the DNA strand enable the writing of micrometer-sized patterns. By contrast, the strong pointwise attachment of DNA to silanized surfaces allows horizontal stretching of single DNA strands to lengths exceeding 1.6 times the contour length of the DNA strand. With this new approach it is possible to directly observe the rupture of the strongly bonded DNA strand.

Bacteriophage lambda↗
PubMed2005

Vibronic excitation of single molecules: a new technique for studying low-temperature dynamics.

Herein, we present vibronic excitation and detection of purely electronic zero-phonon lines (ZPL) of single molecules as a new tool for investigating dynamics at cryogenic temperatures. Applications of this technique to study crystalline and amorphous matrix materials are presented. In the crystalline environment, spectrally stable ZPLs are observed at moderate excitation powers. By contrast, investigations at higher excitation intensities reveal the opening of local degrees of freedom and spectral jumps, which we interpret as the observation of elementary steps in the melting of a crystal. We compare these results to spectral single-molecule trajectories recorded in a polymer. The way in which much more complicated spectral features can be analysed is shown. Surprisingly, pronounced spectral shifts on a previously not accessible large energy scale are observed, which are hard to reconcile with the standard two-level model system used to describe low-temperature dynamics in disordered systems.

Journal Article↗
PubMed2003

Highly substituted azulene dyes as multifunctional NLO and electron-transfer compounds.

Two highly substituted azulene derivatives were synthesised by Pd-mediated dimerisation from the corresponding tolan species. One azulene derivative (2) has donor functionalities (dianisylaminophenyl and dianisylamino) in the 1-, 2-, 3- and 6-positions, while the other (1) has donors (dianisylaminophenyl) in the 2- and 6-positions and acceptors (nitrophenyl) in the 1- and 3-positions. Each azulene derivative shows strong bond length alternation in the solid state, determined by X-ray crystal analysis, and an intense CT band around 450-500 nm in its UV/Vis spectrum. The first-order hyperpolarisability of 1 and of 2 was measured by hyper-Rayleigh scattering and is about that of disperse red DR1. Both azulene derivatives show multiple oxidation processes. The intramolecular adiabatic ET behaviour of the mixed valence radical cations of 1 and of 2 was investigated by UV/Vis/NIR spectroelectrochemistry. The intervalence-CT band of 1(+) could be analysed by the Generalised Mulliken-Hush theory, which yields an electronic coupling V=1140 cm(-1) for the optically induced adiabatic hole transfer.

Journal Article↗