Biomedical subjects

Christine Chappard

Publications and source records attributed to Christine Chappard.

7 recordsLinked to original sources

PubMed2006

Imaging techniques for evaluating bone microarchitecture.

At present, fracture risk prediction in the individual patient relies chiefly on bone mineral density (BMD) measurements. However, many lines of evidence indicate that the decreased bone strength characteristic of osteoporosis is dependent not only on BMD, but also on other factors, most notably bone microarchitecture. Here, we review available tools for characterizing trabecular microarchitecture (in terms of morphology, topology, and texture) and for obtaining 2D and 3D images (using radiography, computed tomography, and magnetic resonance imaging). Bone microarchitecture imaging is a noninvasive method that may improve fracture risk prediction in the individual patient, shed light on the pathophysiology of osteoporosis, and help to monitor the effects of treatments. Among the various methods available to date, magnetic resonance imaging has the advantage of involving no radiation exposure, although its limited availability restricts its usefulness for studying vast populations. Regardless of the methods selected to assess bone microarchitecture, there is a need for validated standardized parameters capable of improving fracture risk prediction in longitudinal studies.

Bone Density↗

PubMed2006

Comparison of synchrotron radiation and conventional x-ray microcomputed tomography for assessing trabecular bone microarchitecture of human femoral heads.

Microcomputed tomography (microCT) produces three-dimensional (3D) images of trabecular bone. We compared conventional microCT (CmicroCT) with a polychromatic x-ray cone beam to synchrotron radiation (SR) microCT with a monochromatic parallel beam for assessing trabecular bone microarchitecture of 14 subchondral femoral head specimens from patients with osteoarthritis (n=10) or osteoporosis (n=4). SRmicroCT images with a voxel size of 10.13 microm were reconstructed from 900 2D radiographic projections (angular step, 0.2 degrees). CmicroCT images with a voxel size of 10.77 microm were reconstructed from 205, 413, and 825 projections obtained using angular steps of 0.9 degrees, 0.45 degrees, and 0.23 degrees, respectively. A single threshold was used to binarize the images. We computed bone volume/ tissue volume (BV/TV), bone surface/bone volume (BS/BV), trabecular number (Tb.N), trabecular thickness (Tb.Th and Tb.Th*), trabecular spacing (Tb.Sp), degree of anisotropy (DA), and Euler density. With the 0.9 degrees angular step, all CmicroCT values were significantly different from SRmicroCT values. With the 0.23 degrees and 0.45 degrees rotation steps, BV/TV, Tb.Th, and BS/BV by CmicroCT differed significantly from the values by SRmicroCT. The error due to slice matching (visual site matching +/- 10 slices) was within 1% for most parameters. Compared to SRmicroCT, BV/TV, Tb.Sp, and Tb.Th by CmicroCT were underestimated, whereas Tb.N and Tb. Th* were overestimated. A Bland and Altman plot showed no bias for Tb.N or DA. Bias was -0.8 +/- 1.0%, +5.0 +/- 1.1 microm, -5.9 +/- 6.3 microm, and -5.7 +/- 29.1 microm for BV/TV, Tb.Th*, Tb.Th, and Tb.Sp, respectively, and the differences did not vary over the range of values. Although systematic differences were noted between SRmicroCT and CmicroCT values, correlations between the techniques were high and the differences would probably not change the discrimination between study groups. CmicroCT provides a reliable 3D assessment of human defatted bone when working at the 0.23 degrees or 0.45 degrees rotation step; the 0.9 degrees rotation step may be insufficiently accurate for morphological bone analysis.

Femur Head↗

PubMed2005

A new anisotropy index on trabecular bone radiographic images using the fast Fourier transform.

BACKGROUND: The degree of anisotropy (DA) on radiographs is related to bone structure, we present a new index to assess DA. METHODS: In a region of interest from calcaneus radiographs, we applied a Fast Fourier Transform (FFT). All the FFT spectra involve the horizontal and vertical components corresponding respectively to longitudinal and transversal trabeculae. By visual inspection, we measured the spreading angles: Dispersion Longitudinal Index (DLI) and Dispersion Transverse Index (DTI) and calculated DA = 180/(DLI+DTI). To test the reliability of DA assessment, we synthesized images simulating radiological projections of periodic structures with elements more or less disoriented. RESULTS: Firstly, we tested synthetic images which comprised a large variety of structures from highly anisotropic structure to the almost isotropic, DA was ranging from 1.3 to 3.8 respectively. The analysis of the FFT spectra was performed by two observers, the Coefficients of Variation were 1.5% and 3.1 % for intra-and inter-observer reproducibility, respectively. In 22 post-menopausal women with osteoporotic fracture cases and 44 age-matched controls, DA values were respectively 1.87 +/- 0.15 versus 1.72 +/- 0.18 (p = 0.001). From the ROC analysis, the Area Under Curve (AUC) were respectively 0.65, 0.62, 0.64, 0.77 for lumbar spine, femoral neck, total femoral BMD and DA. CONCLUSION: The highest DA values in fracture cases suggest that the structure is more anisotropic in osteoporosis due to preferential deletion of trabeculae in some directions.

Journal Article↗

PubMed2005

Bone status in primary hyperparathyroidism assessed by regional bone mineral density from the whole body scan and QUS imaging at calcaneus.

To assess the bone mineral density status in primary hyperparathyroidism (PHPT), we studied 64 females with PHPT and 17 healthy women. Regional BMD (arms, trunk, legs) from the whole body scan and conventional sites (lumbar spine, femur, radius) were assessed by DXA. Quantitative ultrasound (QUS) imaging measurements were performed at calcaneus. Sixteen women had history of renal lithiasis, 11 had low impact fracture and 37 women had neither renal lithiasis nor fracture. In the entire group, the mean Z-scores were significantly decreased at all sites (lumbar spine, femur, radius). In all clinical subgroups, the mean Z-scores were significantly decreased at radius. The mean Z-scores in premenopausal women were significantly decreased comparatively to postmenopausal women at lumbar spine and femur. In a group of PHPT females matched to controls for age and BMI, only BMD values at radius were lower in PHPT patients than in control (P < 0.03). However, from the whole body scan data, all sites but no trunk were significantly involved in PHPT patients (P < 0.04). Using QUS measurements at calcaneus, the BUA but not SOS in PHPT females was significantly lower (P = 0.03) than in controls. Our results suggest that low BMD at lumbar spine and femur is encountered preferentially in premenopausal women. The BMD decrease predominates at limbs in PHPT with presumably a gradient from proximal to distal part of the limbs. Indeed, the distal part of the limbs are the most affected areas in PHPT whatever the amount of cortical or trabecular bone.

Absorptiometry, Photon↗

PubMed2005

Anisotropy changes in post-menopausal osteoporosis: characterization by a new index applied to trabecular bone radiographic images.

Bone intrinsic strength is conditioned by several factors, including material property and trabecular micro-architecture. Bone mineral density (BMD) is a good surrogate for material property. Architectural anisotropy is of special interest in mechanics-architecture relations and characterizes the degree of directional organization of a material. We have developed anisotropy indices from the Fast Fourier Transform (FFT) on bone radiographs. We have validated these indices in a cross-sectional uni-center case-control study including 39 postmenopausal women with vertebral fracture and 70 age-matched control cases. BMD was measured at the lumbar spine and femoral neck. A fractal analysis of texture was performed on calcaneus radiographs at three regions of interest (ROIs), and the result was expressed as the H parameter (fractal dimension =H-2). The anisotropy evaluation was based on the FFT spectrum of these three ROIs extracted on calcaneus radiographs. On the FFT spectrum, we have measured the spreading angle of the longitudinal trabeculae called the dispersion longitudinal index (DLI) and the spreading angle of the transversal trabeculae called the dispersion transversal index (DTI). From the measured parameters, an anisotropy index was derived, and the degree of anisotropy (DA) calculated with DLI and DTI. We have compared the results from the vertebral fracture cases and control cases. The best distinction was obtained for the largest ROI located in the great tuberosity of the calcaneus for all parameters ( P <10(-4)).( )The DA parameter showed a higher value in vertebral fracture cases (1.746+/-0.169) than in control cases (1.548+/-0.136); P <10(-4), and the difference persisted after removal of the subjects with hormonal replacement therapy. The analysis of the receiver operating characteristics (ROC) has shown the best results with DA and Hmean: areas under curves (AUCs) respectively of 0.765 and 0.683, while AUCs associated to LS-BMD and FN-BMD were 0.614 and 0.591 lower, respectively. We determined the odds ratios (OR) by uni- and multivariate analysis. Crude ORs were respectively 3.91 (95% CI: 2.22-6.87) and 3.08 (95% CI: 1.72-5.52) for DA and Hmean. Crude ORs were respectively 1.71 (95% CI: 1.15-2.56) and 1.56 (95% CI: 1.05-2.31) for LS-BMD and FN-BMD. All ORs were statistically significant, and those associated to Hmean and anisotropy indices were higher than those of BMD measurements. From a multivariate analysis including anisotropy indices, Hmean, age and FN-BMD, the remaining significant ORs were respectively 6.33 (95% CI: 2.80-14.30) and 3.08 (95% CI: 1.48-6.37) for DA and Hmean. These data have shown that anisotropy indices on calcaneus radiographs can distinguish vertebral fracture cases from control cases. This analysis provides complementary information concerning the BMD and fractal parameter. These data suggest that we can improve the fracture risk evaluation by adding information related to the directional organization of trabecular bone derived from the FFT spectrum on conventional radiographic images.

Aged↗

PubMed2004

Inactivation of the Na-Cl co-transporter (NCC) gene is associated with high BMD through both renal and bone mechanisms: analysis of patients with Gitelman syndrome and Ncc null mice.

UNLABELLED: Chronic thiazide treatment is associated with high BMD. We report that patients and mice with null mutations in the thiazide-sensitive NaCl cotransporter (NCC) have higher renal tubular Ca reabsorption, higher BMD, and lower bone remodeling than controls, as well as abnormalities in Ca metabolism, mainly caused by Mg depletion. INTRODUCTION: Chronic thiazide treatment decreases urinary Ca excretion (UVCa) and increases BMD. To understand the underlying mechanisms, Ca and bone metabolism were studied in two models of genetic inactivation of the thiazide-sensitive NaCl cotransporter (NCC): patients with Gitelman syndrome (GS) and Ncc knockout (Ncc(-/-)) mice. MATERIALS AND METHODS: Ca metabolism was analyzed in GS patients and Ncc(-/-) mice under conditions of low dietary Ca. BMD was measured by DXA in patients and mice, and bone histomorphometry was analyzed in mice. RESULTS: GS patients had low plasma Mg. They exhibited reduced UVCa, but similar serum Ca and GFR as control subjects, suggesting increased renal Ca reabsorption. Blood PTH was lower despite lower serum ionized Ca, and Mg repletion almost corrected both relative hypoparathyroidism and low UVCa. BMD was significantly increased in GS patients at both lumbar (+7%) and femoral (+16%) sites, and osteocalcin was reduced. In Ncc(-/-) mice, serum Ca and GFR were unchanged, but UVCa was reduced and PTH was elevated; Mg repletion largely corrected both abnormalities. Trabecular and cortical BMD were higher than in Ncc(+/+) mice (+4% and +5%, respectively), and despite elevated PTH, were associated with higher cortical thickness and lower endosteal osteoclastic surface. CONCLUSIONS: Higher BMD is observed in GS patients and Ncc(-/-) mice. Relative hypoparathyroidism (human) and bone resistance to PTH (mice), mainly caused by Mg depletion, can explain the low bone remodeling and normal/low serum Ca despite increased renal Ca reabsorption.

Adolescent↗

PubMed2004

Segmentation of quantitative ultrasonographic images of the calcaneus using elastic deformation of the flexible Fourier contour.

OBJECTIVE: This study investigated a new technique for automatic model-based segmentation of broadband ultrasound attenuation (BUA) images of the calcaneus. We determined whether this technique was able to improve osteoporotic fracture discrimination. METHODS: The segmentation process included 2 major steps: a model-building stage and the automatic segmentation of new image data sets via an elastic deformation of contour models. Broadband ultrasound attenuation was then averaged within the final contour (BUAwhole). The results of the segmentation were validated on a database of 256 patients by comparison of the clinical results obtained with the automatic circular region of interest (BUAcirc) currently implemented on a commercially available ultrasonography unit. All patients were selected by the same physician, who assessed that the fractures were caused by bone fragility on the basis of the circumstances under which fractures occurred and radiologic data. RESULTS: Short-term reproducibility assessed in 49 women was 3.5% and 3.98% for BUAcirc and BUAwhole, respectively. Both BUAcirc (age-adjusted T score, -3.78; P < .0005; age-adjusted odds ratio, 1.92; 95% confidence interval, 1.34-2.75; area under the receiver operating characteristic curve, 0.70) and BUAwhole (age-adjusted T score,-2.73; P < .01; age-adjusted odds ratio, 1.57; 95% confidence interval, 1.12-2.21; area under the curve, 0.67) performed equally well in discriminating healthy postmenopausal patients (n = 150) from those with fractures (n = 60). CONCLUSIONS: Fully automatic segmentation by parametrically deformable elastic models for contour using Fourier descriptors can be achieved with reasonable reproducibility and fracture risk prediction. The method is similar to existing methods (automatic circular region of interest); however, the new contour-based region of interest allows more flexible region of interest geometries and placement and potential adaptation to individual anatomy. The method could also possibly be extended to quantitative ultrasonographic imaging at different skeletal sites.

Adult↗