Search PubMed⌕ Search

Biomedical subjects

Chong-Su Cho

Publications and source records attributed to Chong-Su Cho.

33 records · Page 2Linked to original sources

Mucoadhesive microspheres prepared by interpolymer complexation and solvent diffusion method.

Mucoadhesive microspheres were prepared to increase gastric residence time using an interpolymer complexation of poly(acrylic acid) (PAA) with poly(vinyl pyrrolidone) (PVP) and a solvent diffusion method. The complexation between poly(acrylic acid) and poly(vinyl pyrrolidone) as a result of hydrogen bonding was confirmed by the shift in the carbonyl absorption bands of poly(acrylic acid) using FT-IR. A mixture of ethanol/water was used as the internal phase, corn oil was used as the external phase of emulsion, and span 80 was used as the surfactant. Spherical microspheres were prepared and the inside of the microspheres was completely filled. The optimum solvent ratio of the internal phase (ethanol/water) was 8/2 and 7/3, and the particle size increased as the content of water was increased. The mean particle size increased with the increase in polymer concentration. The adhesive force of microspheres was equivalent to that of Carbopol. The release rate of acetaminophen from the complex microspheres was slower than the PVP microspheres at pH 2.0 and 6.8.

Adhesives↗

Galactosylated chitosan (GC)-graft-poly(vinyl pyrrolidone) (PVP) as hepatocyte-targeting DNA carrier: in vitro transfection.

Galactosylated chitosan-graft-poly(vinyl pyrrolidone) (GCPVP) was synthesized and characterized for hepatocyte-targeting gene carrier. GCPVP itself as well as GCPVP/DNA complex had negligible cytotoxicity regardless of the concentration of GCPVP and the charge ratio, but GCPVP/DNA complex had slightly cytotoxic effect on HepG2 cells only in the case of the higher charge ratio and 20 mM of Ca2+ concentration used. Through the confocal laser scanning microscopy, it is shown that the endocytosis by interaction between galactose ligands of GCPVP and ASGPR of the hepatocytes was the major route of transfection of GCPVP/F-plasmid complexes.

Animals↗

Controlled release of Bordetella bronchiseptica dermonecrotoxin (BBD) vaccine from BBD-loaded chitosan microspheres in vitro.

Chitosan microspheres were prepared by ionic gelation process with sodium sulfate for nasal vaccine delivery. Bordetella Bronchiseptica Dermonecrotoxin (BBD) as a major virulence factor of a causative agent of atrophic rhinitis (AR) was loaded to the chitosan microspheres for vaccination. Morphology of BBD-loaded chitosan microspheres was observed as spherical shapes. The average particle sizes of the BBD-loaded chitosan microspheres were about 2.69 microm. More BBD was released with an increase of molecular weight of chitosan and with an increase of medium pH in vitro due to weaker intermolecular interaction between chitosan and BBD. Tumor necrosis factor-alpha (TNFalpha) and nitric oxide (NO) from RAW264.7 cells stimulated with BBD-loaded chitosan microspheres were gradually secreted, suggesting that released BBD from chitosan microspheres had immune stimulating activity of AR vaccine.

Animals↗

In vitro study of the immune stimulating activity of an atrophic [correction of athrophic] rhinitis vaccine associated to chitosan microspheres.

Chitosan microspheres (CMs) were prepared by an ionic gelation process with tripolyphosphate and characterized. Bordetella Bronchiseptica Dermonecrotoxin (BBD), a major virulence factor of a causative agent of atrophic rhinitis (AR), was loaded on to the CMs for nasal vaccination. BBD-loaded CMs were observed as aggregated shapes although unloaded CMs were observed as relatively spherical ones. The average particle size of the BBD-loaded CMs was 4.39 microm. The lower the molecular weight of chitosan and the higher the medium pH, the greater was the release of BBD from the BBD-loaded CMs in vitro due to weaker intermolecular interaction between chitosan and BBD. Tumor necrosis factor alpha and nitric oxide from RAW264.7 cells exposed to BBD-loaded CMs were gradually secreted with time, suggesting that released BBD from CMs had immune stimulating activity of AR vaccine in vitro.

Adjuvants, Immunologic↗

Preparation of semi-interpenetrating polymer networks composed of silk fibroin and poloxamer macromer.

A system was designed to utilize silk fibroin (SF) as a matrix for wound dressing. For this system, we prepared a sponge type of porous semi-interpenetrating networks (SIPNs) hydrogel composed of SF and poloxamer 407 macromer to enhance the mechanical and functional properties of SF. The thermal and mechanical properties of the hydrogels as well as their swelling behaviors were studied by means of differential scanning calorimetry, compressive modulus measurement, and gravimetric method, respectively. The morphology and crystalline structure of these SIPN hydrogels were also investigated by scanning electron microscopy (SEM) and wide-angle diffractometry, respectively. Conformational change of SF from random coil to beta-sheet structure was accelerated by formation of SIPNs with poloxamer. The melting temperature of poloxamer in the SIPNs decreased due to the prevention of crystallization by the incorporation of SF. The mechanical strength of SIPNs hydrogel was much higher than those of SF itself or SF/poloxamer blend and increased with the poloxamer content. The equilibrium water content of SF was remarkably increased by formation of SIPNs with poloxamer due to the hydrophilicity of poloxamer. The crystallinity and morphology of SIPNs hydrogel were affected by SIPNs hydrogel composition.

Biological Dressings↗

Xyloglucan as a synthetic extracellular matrix for hepatocyte attachment.

The possibility of employing naturally derived xyloglucan (XG) having galactose moieties in the side chain for the development of synthetic extracellular matrix in tissue engineering was studied. Hepatocyte adhesion to the XG-coated polystyrene (PS) dish was 73.9% after 30 min incubation, whereas that to the PS dish as a negative control was 59.1%. The hepatocyte adhesion to the XG-coated surface was dependent on the presence of Ca2+ ions, whereas that to the XG-coated surface could not be induced by Mg2+ ions alone, indicating specific interaction between galactose moieties of XG and asialoglycoprotein receptors of hepatocytes. From the results of fluorescence, confocal laser micrographs and flow cytometry, it was suggested that XG was internalized by hepatocytes through a receptor-mediated mechanism. The DNA synthesis of hepatocytes attached to the XG-coated surface was decreased with an increase of the coating concentration of XG and in the presence of epidermal growth factor (EGF). The spreading shapes of the hepatocytes attached to the surface in the presence of EGF at low concentration of XG (1 microg/ml) were enhanced. The hepatocytes attached to the surface at a high concentration of XG (200 microg/ml) showed round shapes with spheroids after 16 h in the presence of EGF.

Animals↗

Helical structure of sugar-carrying polystyrene in aqueous solution by circular dichroism.

Radical polymerization of N-p-vinylbenzyl-D-lactonamide (VLA) gave an optically active helical polymer. The stereoregularity of poly(N-p-vinylbenzyl-D-lactonamide) (PVLA) measured by 13C NMR spectroscopy showed a well-resolved sharp-line width, which was assigned to the phenyl C-1 carbon of the isotactic polystyrene (PS). The helical structure of PVLA shown by circular dichroism (CD) indicated that the aromatic groups were chirally supramolecular-packed giving optically active disaccharide units in the side chain covalently linked via an amide linkage with PS, the original PS not being optically active. The intensity of CD for PVLA (a) decreased with increasing temperature due to the change in the conformation of the phenyl group or to the breakdown of intermolecular hydrogen bonding of amide groups and (b) increased in a mixture of water and alcohol due to the increased hydrophobicity. The CD intensity for maltose-carrying PS (PVMA) was slightly higher than that of PVLA CD due to the more hydrophobic property of PVMA than PVLA.

Circular Dichroism↗

Production of interferon-beta by fibroblast cells on membranes prepared with RGD-containing peptides.

The production of interferon-beta by NB1-RGB fibroblast cells cultured on protein and peptide membranes prepared from silk fibroin, motif peptides of silk fibroin [(AG)(n)] containing arginine-glycine-aspartic acid (RGD) peptide, and Pronectin was investigated. The cell density on various protein and peptide membranes was approximately the same, although the production of interferon-beta depended significantly on the membranes where the cells were cultured. The highest production of interferon-beta was observed when the cells were cultured on (AG)(6)RGD(AG)(7) membranes prepared with hexafluoroacetone (HFA) as the casting solvent. On RGD-containing peptide membranes more centrally located in the peptides, the cells produced more interferon-beta when the peptide membranes were prepared with HFA as the casting solvent. However, there was no enhanced production of interferon-beta by cells on (AG)(6)RGD(AG)(7) membranes prepared with 9 mol/L LiBr or 4.5 mol/L LiClO(4) solution as the casting solvent. Therefore, both the chemical composition and the secondary and higher order structure of the peptide membranes are important for enhanced production of interferon-beta. The blocking of integrin beta(1) on the cells by anti-integrin beta(1) antibody prevented the enhanced production of interferon-beta on (AG)(6)RGD(AG)(7) membranes prepared with HFA. We suggest that the cells must bind to the RGD sequence having the appropriate conformation through their integrin beta(1) for enhanced production of interferon-beta.

Amino Acid Sequence↗

Controlled release of epidermal growth factor (EGF) from EGF-loaded polymeric nanoparticles composed of polystyrene as core and poly(methacrylic acid) as corona in vitro.

Polymeric nanoparticles composed of polystyrene (PS) as core and poly(methacrylic acid) (PMA) as corona were prepared by the dispersion copolymerization. The potential of the nanoparticles as carriers for recombinant human epidermal growth factor (EGF) was investigated. The nanoparticles showed monodispersity and good water-dispersibility. The loading content of EGF to the nanoparticles was very high due to electrostatic interaction between EGF and nanoparticles. EGF was released as a pseudo-zero order pattern after initial burst effect. The nanoparticles were sufficient for A431 cells proliferation.

DNA↗

Effect of methyl alcohol on the morphology and conformational characteristics of silk sericin.

Effects of methyl alcohol on the morphology and conformational characteristics of silk sericin (SS) were studied. Scanning electron microscope showed that morphology of SS lyophilized was dramatically changed from sponge-like structure to spherical fine particle type. X-ray diffraction method, infrared spectroscopy, and differential scanning calorimetry showed that the conformation of SS was random coil structure regardless of the addition of methyl alcohol. On the other hand, circular dichroism showed that the molecular states of SS were more densely packed.

Animals↗

Galactosylated chitosan as a synthetic extracellular matrix for hepatocytes attachment.

Galactose moiety as the hepatocyte anchorage was covalently coupled with chitosan for the development of synthetic extracellular matrix. Hepatocytes adhesion to galactosylated chitosan (GC)-coated polystyrene (PS) dish became as high as 94.7% after 2 h incubation whereas the hepatocytes adhesion to chitosan-coated PS dish was 69.1%, indication of galactose-specific recognition between GC molecules and asialoglycoprotein receptors of hepatocytes. The DNA synthesis of the hepatocytes adhered to GC-coated dish was increased in the presence of epidermal growth factor (EGF) at low concentration of GC (0.05 microg/ml) whereas the DNA synthesis of the hepatocytes adhered to GC-coated dish was decreased in the presence of EGF at high concentration of GC (5 microg/ml). The spreading shapes of the hepatocytes adhered to the surface in the presence of EGF at low concentration of GC (0.05 microg/ml) were enhanced than in the absence of EGF. The hepatocytes adhered to the surface at high concentration of GC (5 microg/ml) showed round shapes and exhibited many spheroid formation after 24 h in the presence of EGF.

Animals↗

Galactosylated alginate as a scaffold for hepatocytes entrapment.

Galactose moieties were covalently coupled with alginate through ethylenediamine as the spacer for enhancing the interaction of hepatocytes with alginate. Adhesion of hepatocytes onto the galactosylated alginate (GA)-coated polystyrene (PS) surface showed an 18-fold increase as compared with that of the alginate-coated surface and it increased with an increase in the concentration of GA. The morphologies of attached hepatocytes were observed to spread out at the 0.15 wt% GA-coated PS surface while round cells were observed at the 0.5 wt% GA-coated PS surface. Inhibition of hepatocytes attachment onto the galactose-carrying PS-coated surface occurred with the addition of the GA into the hepatocyte suspension, indicating the binding of GA with hepatocytes via the patch of asialoglycoprotein receptors. Primary hepatocytes were entrapped in the GA/Ca2+ capsules (GAC). Higher cell viability and more spheroid formation of hepatocytes were obtained in the GAC than in the alginate/Ca2+ capsules (AC). Moreover, liver functions of the hepatocytes such as albumin secretion and urea synthesis in the GAC were improved in comparison with those in the AC.

Alginates↗

Release of triamcinolone acetonide from mucoadhesive polymer composed of chitosan and poly(acrylic acid) in vitro.

Transmucosal drug delivery (TMD) system using mucoadhesive polymer has been recently interested due to the rapid onset of action, high blood level, avoidance of the first-pass effect and the exposure of the drug to the gastrointestinal tract. A novel mucoadhesive polymer complex composed of chitosan and poly(acrylic acid) (PAA) was prepared by template polymerization of acrylic acid in the presence of chitosan for the TMD system. Triamcinolone acetonide (TAA) was loaded into the chitosan/PAA polymer complex film. TAA was evenly dispersed in chitosan, PAA polymer complex film without interaction with polymer complex. Release behavior of TAA from the mucoadhesive polymer film was dependent on time, pH, loading content of drug, and chitosan PAA ratio. The analysis of the drug release from the mucoadhesive film showed that TAA might be released from the chitosan/PAA polymer complex film through non-Fickian diffusion mechanism.

Acrylic Resins↗

Difference in the attachment of hepatocytes between a poly(gamma-benzyl L-glutamate) (PBLG)/poly(N-isopropylacrylamide) (PNIPAAm) diblock copolymer cast surface and a PBlg/PNIPAAm Langmuir-Blodgett one.

The effects of temperature on the monolayer behavior of the poly(gamma-benzyl L-glutamate) (PBLG)/poly(N-isopropylacrylamide) (PNIPAAm) diblock copolymer at the air-water interface were examined. Differences in the adhesion and morphology of hepatocytes between Langmuir-Blodgett (LB) films and cast surfaces of the PBLG/PNIPAAm diblock copolymer were investigated. The surface pressure (pi)-area (A) curve of the block copolymer had a tendency to expand with the temperature, due to a change in the conformation of PNIPAAm with the temperature change. Attachment of hepatocytes onto the PBLG/PNIPAAm block copolymer LB surface decreased slightly with an increase of the PNIPAAm content in the block copolymer, whereas that onto the cast surface decreased rapidly with an increase of the PNIPAAm content, due to the hydrophilic property of PNIPAAm in the microphase-separated structure. Rapid morphological changes of the hepatocytes adhered to the LB surfaces, from round shapes to spreading ones, were observed, compared with the cast films. The hepatocytes that adhered to the block copolymer LB surfaces showed less flattened and spread shapes than those that adhered to the PBLG one. Also, the spheroid formation of the hepatocytes increased with an increase of the PNIPAAm content in the block copolymer cast films.

Acrylic Resins↗

High transfection efficiency of poly(4-vinylimidazole) as a new gene carrier.

Poly(4-vinylimidazole) (P4V) was obtained by free radical polymerization of 4-vinylimidazole (4V) prepared by decarboxylation of urocanic acid. P4V formed a complex with DNA that exhibited higher transfection effiency on Hela cells than polyethylenimine (PEI), through the proton sponge mechanism of the imidazole groups in the side chain of the P4V, and low cell toxicity.

3T3 Cells↗