Biomedical subjects

C Marriott

Publications and source records attributed to C Marriott.

At least 19 recordsLinked to original sources

PubMed2004

A high power ultrasonic array based test cell.

This paper describes the use of finite element (FE) analysis as a tool in the design process for laboratory based ultrasonic test cells. The system was designed to incorporate an array of ultrasonic transducers to provide a pressure focus in the centre of the cell and importantly, operate both above and below the cavitation threshold of the load medium. Furthermore, the cell incorporates a coolant jacket to accommodate temperature control of the load material associated with the process. A 2D FE model corresponding to a slice through the operational plane of the cell was developed and used to investigate the influence of cell wall material and thickness, transducer configuration, rotation of a metallic stirrer blade and heat transfer fluid on the cell acoustic response. Importantly, experimentally measured pressure field maps demonstrate good correlation with the FE predicted fields. A final manufactured test cell is shown to produce a highly focussed region of cavitation. Finally, the importance in accurately representing the acoustic properties of the constituent materials used in such FE models is demonstrated through an illustrated example.

Journal Article↗

PubMed2004

A comparison of topical formulations for the prevention of human schistosomiasis.

Recently, a dimeticone formulation has been shown to be effective at preventing Schistosoma cercariae infecting skin, while DEET (N,N-diethyl-m-toluamide), a highly effective insecticide, has been shown to have activity against cercariae. Seven formulations, 3 containing DEET, were prepared and applied to excised human skin in Franz cells for 1 h. Schistosoma cercariae were applied for 30 min at 1 and 24 h, and the number that penetrated the skin calculated (n = 9). DEET could not be incorporated into the dimeticone formulation, yet it remained the most effective at preventing cercarial penetration, both 1 and 24 h after application. The ointments that contained DEET did prevent penetration but their mode of action was due to the toxicity of DEET against the cercariae. The persistence of the protection afforded by the dimeticone formulation after washing suggests that the formulation may be interacting with the stratum corneum to prevent cercarial recognition of skin.

Animals↗

PubMed2003

Delayed tail loss during the invasion of human skin by schistosome cercariae.

Schistosomiasis is initiated when cercarial larvae invade human skin. Contrary to long-held assumptions, most cercariae of Schistosoma mansoni do not shed their propulsive tails as they penetrate. Scanning electron microscopy studies and infection experiments with entire human skin and differentiated, stratum corneum-like, human keratinocyte cultures, have shown that most cercarial tails enter the skin along with their bodies. We propose that this behaviour is an adaptive trait linked with concomitant immunity.

Animals↗

PubMed2003

Penetration of human skin by the cercariae of Schistosoma mansoni: an investigation of the effect of multiple cercarial applications.

It has previously been postulated that L-arginine emitted by penetrating Schistosoma mansoni cercariae serves as an intraspecific signal guiding other cercariae to the penetration site. It was suggested that penetrating in groups offers a selective advantage. If this hypothesis is correct and group penetration at one site on the host offers an advantage, it would follow that at such a site, successive groups of cercariae would be able to penetrate skin in either greater numbers or at a faster rate. This prediction was tested by the use of an in vitro model of cercarial penetration based on the Franz cell and using human skin. It was demonstrated that there was no increase in the percentage of cercariae able to penetrate the skin with subsequent exposures. Consequently, it seems unlikely that the release of L-arginine by cercariae during penetration could have evolved as a specific orientation system based on a selective advantage offered by group penetration.

Animals↗

PubMed2002

Dimethicone barrier cream prevents infection of human skin by schistosome cercariae: evidence from Franz cell studies.

One approach to the prevention of schistosomiasis is the use of topical formulations to inhibit cercarial penetration of skin. A number of formulations containing either cercaricidal ingredients or components designed to inhibit penetration have been studied, but with variable results. Such studies have rarely considered the persistence of inhibitory effects through time, and to date, there have been no systematic investigations of barrier formulations. The aim of this study was to use Franz cells to investigate the effect of such barrier creams on the penetration of S. mansoni cercariae into human skin. The results show that a single application of a barrier cream based on dimethicone offers a high level of protection against penetration that is sustained for at least 48 hr.

Administration, Topical↗

PubMed2001

Effects of molecular weight of polyvinylpyrrolidone on the glass transition and crystallization of co-lyophilized sucrose.

The purpose of the present study was to investigate the effects of molecular weight (MW) of polyvinylpyrrolidone (PVP) on glass transition and crystallization of sucrose. Thus, sucrose was co-lyophilized with 2.5 and 5.0% w/w PVP of different molecular weights, which were characterized using gel permeation chromatography. Freeze drying was carried out for 48 h at a shelf temperature of -40 degrees C and a pressure of about 36 Pa. The samples were then dried in a vacuum oven at 24 degrees C for 12 h before drying for a further 12 h at 40 degrees C. Differential scanning calorimetry (DSC) was employed to measure the glass transition temperature (Tg), dynamic crystallization temperature (Tc) and isothermal crystallization induction time (tc) at 85 degrees C of sucrose. Isothermal water vapour sorption of each sample was also measured at different relative humidities. Tg values of sucrose varied from 48.3+/-0.8 degrees C for freeze-dried (FD) sucrose alone to 58.8+/-0.8 degrees C for the mixture containing 5.0% PVP of nominal MW 300 K. PVP increased sucrose T(g) significantly (ANOVA P<0.05). Although there was no significant difference (P>0.05) in Tg of the mixtures containing 2.5% w/w PVP of different MW, samples with 5.0% PVP of MW 300 K produced a significantly higher (P<0.05) Tg than the other mixtures. All mixtures were shown to possess higher (P<0.01) Tc than FD sucrose alone, which exhibited a T(c) of approximately 85 degrees C. PVP of MW 300 K consistently induced a significantly (P<0.05) higher Tc of sucrose than PVP of smaller MW. Increasing PVP concentration from 2.5 to 5.0% also resulted in a substantial increase in sucrose Tc. Using isothermal water vapour absorption, sucrose tc was found to increase up to over 10 times when it was co-lyophilized with 2.5% PVP, the actual value of tc being dependent upon the MW of the PVP. For example, PVP of MW 300 K resulted in a sucrose tc at 85 degrees C (89.1-95.6 min), which was approximately seven times higher than that of 2.5% PVP of MW 24 or 40 K. A longer tc of sucrose was also observed for mixtures containing PVP of MW 300 K than when sucrose was mixed with PVP of smaller MW. Thus the effect of PVP on sucrose Tg, Tc and tc was found to be dependent upon MW. PVP of higher MW was more efficient in inhibiting sucrose crystallization and by stabilizing glassy structures of the sugar, these polymers may improve the stability of co-lyophilized proteins and peptides.

Calorimetry, Differential Scanning↗

PubMed2001

Lactose as a carrier in dry powder formulations: the influence of surface characteristics on drug delivery.

The aim of the study was to investigate the interdependence of carrier particle size, surface treatment of the carrier, and inclusion of fines on the drug delivery from dry power inhaler formulations. Two size fractions (< 63 and 63-90 microm) of alpha-lactose monohydrate were subjected to treatment with 95% (v/v) ethanol to introduce small asperities or cavities onto the otherwise smooth surface without substantially changing the particle shape. After blending with albuterol sulfate [ALB; volume median diameter (VMD), 1.9 microm; geometric standard deviation (GSD), 1.5], the solvent-treated lactose produced a fine particle fraction (FPF; < 6.18 microm) and dispersibility of the drug that was significantly (ANOVA p < 0.01) lower than that which resulted from formulations containing untreated lactose of a similar size fraction, after aerosolization at 60 L min(-1) via a Rotahaler. The two size fractions of the treated lactose resulted in similar deposition profiles of ALB. The effects of such surface asperities or cavities of lactose were offset by introducing a small amount (5% w/w) of smaller-sized lactose (5-10 microm) to the powder formulations. The fine lactose increased the FPF and dispersibility of ALB to such a level that all lactose batches, regardless of particle size or whether solvent treated, produced a similar fraction of aerosolized ALB. The inclusion of recrystallized needle lactose (5-15 microm) was superior to micronized lactose in improving the aerosolization of ALB. The findings of this study indicate that the presence and characteristics of the finer fraction of lactose carrier particles dominate over the particle size and surface smoothness of the carrier particles in determining dispersion and deaggregation of drugs from dry powder formulations for inhalation.

Chemistry, Pharmaceutical↗

PubMed2001

The use of lactose recrystallised from carbopol gels as a carrier for aerosolised salbutamol sulphate.

Lactose was crystallised either from Carbopol gel without stirring or from a constantly-stirred aqueous solution, to obtain lactose crystals designated as Carbo and control lactose, respectively. The Carbo lactose was shown to have a more regular shape with smoother surface as compared with the control lactose. These lactoses were fractionated by sieving to produce batches with different sizes before blending separately with salbutamol sulphate (SS, VMD 5.8 microm) in a ratio of 67.5:1 w/w using the same mixing procedure. SS dispersion and deaggregation were investigated using a 4-stage liquid impinger after aerosolisation at 28.3, 60.0 and 96.0 l/min via a Rotahaler. At all flow rates, the Carbo lactose produced significantly higher (ANOVA, P<0.01) emission of SS from the Rotahaler as compared with the control lactose of a similar size. The Carbo lactose also resulted in a significantly (P<0.05) higher fine particle fraction of SS than the control lactose. Moreover, drug emission from formulations containing the Carbo lactose was consistently more reproducible than those of the control lactose blends. In conclusion, the efficiency and reproducibility of drug delivery by dry powder inhalers can be improved using carrier particles of precisely defined morphological features.

Acrylic Resins↗

PubMed2001

Mucus altering agents as adjuncts for nonviral gene transfer to airway epithelium.

Nonviral vectors have been shown to be a safe and valid alternative to recombinant viruses for gene therapy of cystic fibrosis (CF). Nevertheless, gene transfer efficiency needs to be increased before clinical efficacy is likely in man. One barrier to increased efficacy is normal airway mucus. Using an ex vivo model of sheep tracheal epithelium, we show that this barrier can, in part, be overcome by treatment with the mucolytic agents, Nacystelyn or N-acetylcysteine using either a cationic lipid or a cationic polymer as the gene transfer agent. Further, in vivo application of either Nacystelyn or the anticholinergic glycopyrrolate, both clinically used agents, resulted in increased reporter gene expression in the mouse lung, but no significant correction of the bioelectric defect in CF null mice. These results, whilst unlikely to be sufficient in themselves to achieve clinically relevant gene therapy, may be a further useful step in the attainment of this goal.

Acetylcysteine↗

PubMed2000

The use of different sugars as fine and coarse carriers for aerosolised salbutamol sulphate.

The aim of this study was to investigate the dispersion and deaggregation of a model drug, salbutamol sulphate (SS), using lactose, mannitol or sorbitol as coarse and fine carriers. Binary and tertiary formulations containing micronised salbutamol sulphate (SS) and sieved (63-90 microm) coarse sugar crystals or salbutamol sulphate (SS) with a mixture of coarse and fine sugar particles were prepared. Factorial design was employed to investigate the effects of three variables, i.e. the chemical entity of the coarse sugar carrier, the chemical entity of the fine sugar and the concentration of fine sugar, on the dispersion and deaggregation of salbutamol sulphate after aerosolisation at 60 l/min via a Rotahaler(R) into a twin stage liquid impinger (TSI). The binary formulations containing the different sugar entities produced differences in the fine (<6.4 microm) particle fraction (FPF) of SS in a decreasing order of mannitol >sorbitol >lactose, but failed to produce efficient dispersion of SS since the FPF was <10%. Adding fine sugar particles and increasing their concentration to the binary mixtures generally resulted in an increase in the FPF of salbutamol sulphate. The chemical nature of the fine carriers was found to play a less important role in determining respirable fraction of the drug than the coarse carriers. In conclusion, other sugars such as mannitol or sorbitol, besides lactose, may be employed as coarse and/or fine carriers for incorporation into dry powder aerosol formulations to increase FPF.

Aerosols↗

PubMed2000

The influence of carrier morphology on drug delivery by dry powder inhalers.

Alpha-lactose monohydrate was prepared to have different morphological features but with similar particle size. The crystal shape and surface smoothness of lactose were quantified by a number of shape descriptors and these were supported qualitatively by the visual examination of scanning electron (SE) micrographs of the crystals. All batches of lactose were subjected to a similar history of processing before blending separately with micronised salbutamol sulphate (SS) in a ratio of 67.5:1, w/w, using similar procedures. In vitro deposition of SS from these formulations was investigated after aerosolisation of the formulations at 60 l min(-1) via the Rotahaler and the Cyclohaler into a twin stage liquid impinger. The formulations prepared using the different batches of lactose produced different deposition profiles of SS. The fine particle (< 6.4 microm) fraction (FPF) of aerosolised SS varied from 12.6 +/- 2.4 to 25.6 +/- 1.5% after aerosolisation from the Cyclohaler whilst it changed from 15.0 +/- 2.2 to 24.4 +/- 0.8% after aerosolisation from the Rotahaler. The fine particle dose (FPD) and dispersibility of SS followed a similar trend to the change in the FPF of the drug. No significant difference (ANOVA P > 0.05) was observed for the deposition profiles of SS after aerosolisation from the Rotahaler and the Cyclohaler. The FPF and dispersibility of SS increased with either the surface smoothness (P < 0.01) or elongation ratio (P < 0.01) of lactose crystals. The t-ratio values of FPF and dispersibility of SS generated by changes in the surface smoothness were similar to those resulting from changes in elongation ratio. Increasing either the surface smoothness or the elongation ratio of lactose crystals will increase the potentially respirable fraction of SS from dry powder formulations for inhalation.

Administration, Inhalation↗

PubMed2000

Anti-mucus polyclonal antibody production, purification and linkage to the surface of albumin microspheres.

This aim of this study was to develop a microparticulate based oral drug delivery system, which could prolong gut transit time by binding via specific interactions to the gut mucus layer. Porcine gastric mucus was semi-purified and used as an antigen to raise a polyclonal antiserum in rabbits. The immunoglobulin fraction of this serum was isolated, purified and tested for homogeneity and cross reactivity. High cross-reactivity was displayed when the antiserum was challenged against types of mucus other than that used as an antigen, but no significant cross-reactivity occurred when challenged against some other common macromolecules. The antibody fraction of this serum was covalently linked to three types of albumin microspheres (MS) using 1-ethyl-3(3-dimethyl aminopropyl) carbodiimide. The MS employed had either a hydrophobic, a hydrophilic or a carboxymethylated surface, and were prepared and characterised as described earlier (MacAdam, A.B., Shafi, Z.B., Martin, G.P. and James, S.L. 1997. Preparation of hydrophobic and hydrophilic MS and determination of surface carboxylic acid and amino residues. Int. J. Pharm. 151, 47-55). Binding of these MS to both radioiodinated mucin in suspension and to isolated gut segments was measured. Hydrophilic and carboxymethylated MS with surface-associated antibody bound significantly more mucin from a suspension than did uncoated controls. Similarly, anti-mucus antibody-coated hydrophilic and carboxymethylated MS bound more strongly to an isolated gut segment than did uncoated controls or controls coated in an antibody specific for albumin. These results suggest anti-mucus antibody coated albumin MS may be a useful model to act as comparators in studies aimed at developing drug delivery systems with delayed gastrointestinal transit.

Albumins↗

PubMed2000

Use of alveolar cell monolayers of varying electrical resistance to measure pulmonary peptide transport.

The apparent permeability coefficient (P(app)) of two fluorescently tagged model hydrophilic peptides, acXASNH(2) and acXAS(GAS)(7)NH(2), and (14)C-mannitol across monolayers of cultured rat alveolar epithelial cells of varying transepithelial electrical resistance (TER) has been examined. In line with their design features, the peptides were not degraded under the conditions of the test. Furthermore, no concentration dependence of transport of the tripeptide acXASNH(2) was observed over the concentration range studied, nor was any directional transport seen for either of the model peptides, indicating that under the conditions of the test they were not substrates for any transporters or efflux pumps. From the hydrophilic nature of the peptides (as assessed by their log P), and their inverse dependence of transport with molecular weight and TER, it was assumed that the peptides were transported across the cell monolayer passively via the paracellular route. The observed P(app) for the transport of (14)C-mannitol and the peptides across rat alveolar epithelial cell monolayers were found to be inversely (though not linearly) related to the measured TER and could be well-modeled assuming the presence of two populations of "pores" in the cell monolayer, namely, cylindrical pores of diameter 1.5 nm and large pores of diameter 20 nm. The relative populations of the two types of pores varied with the TER of the monolayer, with the number of large pores decreasing with an increase in TER (and the number of small pores taken as fixed). These results suggest that if the cell monolayer is well characterized with respect to the passage of a range of probe molecules across monolayers of varying electrical resistance, it should be possible to predict the P(app) of any hydrophilic peptide or drug crossing the membrane by the paracellular route at any desired TER using a monolayer of any electrical resistance, above a minimum value.

Alanine↗

PubMed2000

The infection of human skin by schistosome cercariae: studies using Franz cells.

Franz cells (2-chambered, air/fluid phase static diffusion devices, previously used for the study of drugs across viable human skin) are utilized for the first time to investigate the process of infection of human skin by Schistosoma mansoni cercariae. Skin obtained from cosmetic surgery sources was used in the Franz cells to describe the temporal dynamics of the early interaction of cercariae with skin. At 38 degrees C, about 50% of cercariae applied in water to the epidermal surface of the skin were irreversibly attached within 1 min and after 5 min about 85%, were similarly irrecoverable. The technique also provides the means of following the early penetration path of cercariae by histological methods. Franz cell results on the dynamics of attachment/early penetration have been compared with those obtained using artificial skin equivalents and non-human mammalian skin models in the context of the physical and chemical differences between these systems and viable human skin. It is concluded that Franz cells provide a convenient system for directly investigating the early phases of S. mansoni cercariae interaction with human skin.

Animals↗

PubMed2000

Systematic investigations of the influence of molecular structure on the transport of peptides across cultured alveolar cell monolayers.

PURPOSE: To determine how the structures of peptides influence their alveolar permeability. METHODS: The studies were performed using 14 synthetic 'model' peptides, labelled with a novel, non-intrusive amino acid fluorophore, and their transport studied using rat alveolar cell monolayers cultured on permeable supports. RESULTS: The passage of the peptides across the epithelial cell monolayers is shown to be primarily paracellular, with an inverse dependence on molecular size, and an enhanced flux observed for cationic peptides. The apparent permeability coefficients (Papp) for the peptides (together with those for other organic solutes, taken from the literature) are shown to be well-modelled assuming two populations of 'pores' in the monolayers, modelled as cylindrical channels of radii 15 A and 22 nm. The former pores are shown to be numerically equitable with the monolayer tri-junctional complexes, and the latter are taken as monolayer defects. CONCLUSIONS: The various monolayer Papp values correlate well with the results from in vivo transport experiments, and the conclusion is drawn that the pulmonary delivery of peptide drugs is perfectly exploitable.

Animals↗

PubMed2000

Crystallization of lactose from carbopol gels.

PURPOSE: To crystallize lactose under static conditions with a view to preparing crystals of well-defined morphology. METHODS: et-Lactose monohydrate was crystallized from neutralized Carbopol 934 gels. When the majority of crystals had grown to maturity, the gels were acidified using diluted hydrochloric acid and the crystals were harvested by filtration or centrifugation and washed with ethanol-water mixtures. RESULTS: Crystals prepared from the gel had a consistently narrower size distribution than control crystals, prepared from solution under constant stirring. If crystallization was effected in the gel without sedimentation of the crystals, then the resultant crystals had smooth surfaces without visually detectable surface roughness or asperities viewed by optical microscopy. The crystals from Carbopol gels also exhibited the uniform shape of an elongated tomahawk regardless of the crystallization conditions, in contrast to crystallization under constant stirring, where the crystal shape of lactose changed with crystallization conditions especially as a function of the initial concentration of lactose. All batches of lactose crystals prepared from Carbopol gels existed as alpha-lactose monohydrate, which showed better flowability than the controls of a similar particle size. CONCLUSIONS: Crystallization from Carbopol gel produces lactose crystals of uniform size, regular shape, smooth surface, and improved flowability.

Acrylic Resins↗

PubMed2000

The influence of hydrocolloid patch composition on the bioavailability of triamcinolone acetonide in humans.

Triamcinolone acetonide (TACA) is a corticosteroid; it is used in the systemic and topical treatment of a variety of inflammatory conditions, including eczema and psoriasis. Conventionally, for topical use, the drug is formulated in a cream or ointment. However, it has been observed in vitro that percutaneous penetration of corticosteroids can be influenced by hydrocolloid patches. Corticosteroids produce a pallor or blanching when applied to the skin that correlates with anti-inflammatory activity; this property has been used extensively as a bioassay. The aim of this study therefore was to evaluate the occlusive properties of a range of hydrocolloid patches containing TACA on the drug's penetration in vivo using visual assessment and a graded multiple measurement. The in vivo hydration of these dermatological patches was also investigated. Statistical analysis of the weight gains of patches containing either NaCMC 39% or pectin 39% showed that there was a significant difference in the rates of hydration of the two types of patch (p < .005). An increase in application time of the hydrocolloid patches allowed more TACA to be released, which was illustrated by an increase in both the maximum percentage total possible score (%TPS) values and AUC, although changes in the hydrocolloid composition did not significantly alter the blanching response. All of the patches adhered well, were unobtrusive to the normal activity of the wearers, and showed great potential for the convenient, localized, prolonged delivery of drugs to the skin.

Administration, Cutaneous↗

PubMed2000

The influence of crystallization conditions on the morphology of lactose intended for use as a carrier for dry powder aerosols.

Lactose has been widely used as a carrier for inhalation aerosols. The carrier morphology is believed to affect the delivery of the drug. The aim of this study was to investigate the effects of crystallization conditions on the morphology of alpha-lactose monohydrate intended for use as the carrier for dry powder aerosols. The crystallization of lactose was carried out from aqueous solutions at different supersaturations, temperatures, different stages of crystallization and in the presence of different water-miscible organic solvents. The majority of lactose crystals were found to be either tomahawk-shaped or pyramidal after crystallization at an initial lactose concentration between 33-43% w/w, but these became prismatic if the lactose concentration was increased to 50% w/w. A further increase in the lactose concentration to 60% w/w led to the preparation of elongated cuboidal crystals. Higher initial lactose concentrations tended to result in the crystallization of more elongated particles. Crystallization at 40 degrees C was shown to prepare lactose crystals with a more regular shape and a smoother surface than those crystallized at 0 degrees C. Lactose particles generated during the later stage of crystallization were found to be more regular in shape with a smoother surface than those prepared in the earlier stage. The addition of 10% (v/v) methanol or ethanol or acetone to the mother liquor increased the growth rate of lactose particles whereas addition of propanol or glycerine inhibited the rate of crystal growth. Lactose crystals prepared in the presence of glycerine were more regularly shaped with a smoother surface than those prepared in the presence of ethanol or acetone. All the resultant crystals were shown to comprise alpha-lactose monohydrate. Lactose crystals could be prepared with a precisely defined morphology by means of carefully controlling the crystallization conditions.

Aerosols↗