Search PubMed⌕ Search

Biomedical subjects

C Li

Publications and source records attributed to C Li.

At least 433 records · Page 24Linked to original sources

[A mutation of platelet glycoprotein I balpha results in defects in its interaction with immobilized vWF].

OBJECTIVE: To study the importance of glycoprotein (GP) I balpha mutation (A156V) in interaction between mutant expressing cell and immobilized vWF under fluid shear stress. METHODS: Mutant GP I balpha cDNA was cloned into the EcoR I site of the mammalian expression vector pDX, mutant cDNA was then transfected into CHO betaIX cells. Human vWF was purified from blood cryoprecipitate by glycine and NaCl precipitation and subsequent separation on sepharose 4B column. The purified vWF was immobilized onto a coverslip. Cell rolling was induced in a parallel-plate flow chamber and observed by phase-contrast video microscope. RESULTS: CHO cells expressing GP I b-IX-V complex could adhere to and roll on immobilized vWF. The A156V mutant cells retained the ability to adhere and roll on vWF matrix, but the rolling speed was significantly faster than that of wild type cells, indicating that the off-rate of the ligand-receptor bond between the mutant and vWF was impaired. Binding of monoclonal antibody AN51 to mutant GP I balpha decreased significantly, indicating that the A156V mutation altered the conformation of the N-terminal ligand-binding region of GP I balpha. CONCLUSION: The mutant GP I balpha has a faster off-rate for its interaction with immobilized vWF. The mutant polypeptide adopts an altered conformation in N-terminal ligand-binding region of GP I balpha. The parallel-plate flow chamber is an extremely useful system in evaluating interaction between GP I balpha and vWF.

Animals↗

[Experimental study on treatment of chronic renal failure with yishen qudu capsule].

OBJECTIVE: To study the mechanism of action of Yishen Qudu capsule (YSQDC) in experimental rat model of chronic renal failure (CRF). METHODS: Membranous nephropathy model was induced by cationized bovine serum albumin intravenous administration in rats for 7 weeks and developed to CRF. The model was then treated with YSQDC of large or small dose by gastrogavage for 5 weeks. Oxidated starch was used in the control group. RESULTS: YSQDC could reduce proteinuria, serum creatinine, blood urea nitrogen, total cholesterol, triglyceride and serum circulating immune complex (P < 0.01 or P < 0.05), it also reduced the kidney coefficient, glomerular cells and tubular protein cast significantly (all P < 0.01). The strength of immune fluorescence weakened remarkably (P < 0.01). The pathological lesions improved significantly after treatment under light and electron-microscopic examination. CONCLUSION: YSQDC could improve renal function significantly and inhibit the progression of CRF.

Animals↗

[Effects of microinjection of amino acids into pre-Bötzinger complex on respiration in adult rats].

Experiments were performed on sodium pentobarbital anesthetized and bilaterally vagotomized adult SD rats. Microinjection of an excitatory neurotoxin, kainic acid, into pre-Bötzinger complex initially lengthened the duration of inspiration, shortened the duration of expiration and increased the respiratory frequency, and subsequently abolished rhythmic respiration. Injection of an excitatory amino acid, L-glutamate, shortened the duration of expiration. Injection of the inhibitory amino acids (either glycine or gamma-aminobutyric acid) shortened the duration of inspiration. These results suggest that the pre-Bötzinger complex in adult rats plays an important role in neurogenesis and maintenance of rhythmic respiration.

Animals↗

[Study the chemical constituents from Phlomis mongolica turcz].

OBJECTIVE: To investigate the chemical constituents from the root of Phlomis mongolica. METHOD: The chemical constituents were extracted with solvent and separated with chromatographic methods. Three compounds were obtained and identified by MS, 1H-NMR, 13C-NMR, DEPT, HMQC and HMBC methods. RESULT: The structures were established as phloyoside III, phloyoside I and cistanoside B. CONCLUSION: These compounds were obtained from P. mongolica for the first time. Phloyoside III is a new compound.

Catechols↗

[Adsorption behavior of chromate onto activated carbon particles].

In this paper, the adsorption behavior of chromate onto activated carbon particles was studied as a function of pH, flow rate and the concentration of tested anion. The results showed that chromate anion was not only reduced but also adsorbed by activated carbon particles, the percentages of reduction and adsorption were strongly dependent on the pH value and the flow rate. In the medium of pH < 10, chromate anion could be adsorbed directly onto the activated carbon particles and the adsorbed chromate could be eluted from activated carbon particles by 1 mol/L NaOH without valence change. The reduced product of chromate anion was mainly Cr (VI), Cr(VI) could be adsorbed in the pH > 4 medium by the activated carbon particles and eluted with 1%H2SO4.

Adsorption↗

[Chemical constituents from Eremurus chinensis Fedtsch].

OBJECTIVE: To investigate the chemical constituents from the herb Eremurus chinensis. METHOD: The chemical constituents were extracted with solvent and separated with column chromatography. RESULT: The structures were identified as chrysophanol 8-Me ether, aloesaponol III, daucosterol and beta-sitosterol. CONCLUSION: These compounds were separated from genus Eremurus first time.

Liliaceae↗

[Chemical constituents from Speranskia tuberculata (Bge.) Baill].

OBJECTIVE: To investigate the chemical constituents from the herb Speranskia tuberculata. METHOD: The chemical constituents were extracted with solvent and separated with column chromatography. The structures were elucidated by spectral analysis. RESULT: Two compounds were isolated from the plant and identified as 18-hydroxy(-)-manool and beta-sitosterol. CONCLUSION: Both were separated from this plant first time.

Diterpenes↗

[The expression of cell adhesion molecules on lymphatic endothelial cells in rectum adenocarcinoma of human].

This study was conducted to explore the mechanism of lymphatic dissemination and metastasis of cancer cells; the specific aim was to investigate the expression of cells adhesion molecules on lymphatic endothelial cells. Immunohistochemical method was used. The rectum tissues and lymphnodes were taken from five normal human subjects. The cancer peripheral tissues and lymphnodes, and the metastasized lymphnodes were taken from eight patients with rectum adenocarcinoma. The result showed that the intercellular adhesion molecule-1 (ICAM-1) and carcinoma embryonic antigen (CEA) were expressed on lymphatic endothelial cells in cancer peripheral tissues and metastasized lymphnode. The expression of ICAM-1 and CEA in cancer peripheral tissues and lymphnodes was much more remarkable than that in metastasized lymphnodes. These data suggest that ICAM-1 and CEA be cell adhesion molecules between cancer cells and lymphatic endothelial cells.

Adenocarcinoma↗

[Effects of 6 kinds of metal elements on meiotic maturation and in vitro fertilization on mouse oocyte].

To study the effects of Cd, Pb, Ni, Mn, Cr and Al on reproductive toxicity, the meiotic maturation and in vitro fertilization(IVF) of mouse oocytes were studied using in vitro culture and IVF of mouse oocytes. The results showed that except Al(NO3)2, the other groups [CdCl2, Pb(NO3)2, NiCl2, MnSO4 and CrCl3] could significantly reduce the number of superovulation oocyte. All of them could inhibit the meiotic maturation, the rates of IVF and extruding of the first polar body, but there was no impact on the germinal vesicle breakdown (GVBD) in vivo. The results also showed that except Al(NO3)3, other elements could obviously inhibit germinal vesicle breakdown of mouse oocytes. The results suggested that these elements might damage the process of meiotic maturation of oocyte of women at child-bearing age oocyte and reduce the fertility and reproductive capacity and result in sterile.

Animals↗

[Three-dimensional surface reconstruction of spiral CT for teeth and clinical use in examining impacted teeth of jaws].

OBJECTIVE: To establish a new technique for three-dimensional surface reconstruction of teeth (dental surface reconstruction), and apply it to investigate impacted teeth in bone before operation. METHODS: On the basis of three-dimensional surface reconstruction of teeth and jaws, the dental surface reconstruction is obtained with the technique of shaded surface display (SSD), making transparent bone around. This technique is applied to investigate 9 cases of supernumerary and impacted teeth. RESULTS: Dental surface reconstruction image can present the dental surface image including crown, root, neck and root bifurcation in three-dimensional way, without presenting the image of other tissue around. In 4 cases, the abnormal configuration, labial or palatal location, and relation with dentition in anterior maxilla of 5 supernumerary were shown. In 1 case, the shape, location, eruption orientation and the angle of orthodontic distraction of 1 impacted permanent canine were displayed. In 3 cases, the shape, location, and extraction resistance of 6 impacted wisdom teeth were revealed. In 1 case, the configuration, distance to adjacent molar of 1 impacted wisdom tooth, which is a transposition tooth in maxillary sinus, were also demonstrated. CONCLUSION: The dental surface reconstruction is a new technique to display three-dimensional surface configuration of teeth. This technique can be applied to examine impacted and supernumerary teeth before surgical and orthodontic treatment.

Adult↗

[A surface reacted layer study of titanium-zirconium alloy after dental casting].

OBJECTIVE: To investigate the influence of the mold temperature on the surface reacted layer of Ti-Zr alloy castings. METHODS: Ti-Zr alloy was casted into a mold which was made of a zircon (ZrO2.SiO2) for inner coating and a phosphate-bonded material for outer investing with a casting machine (China) designed as vacuum, pressure and centrifuge. At three mold temperatures (room temperature, 300 degrees C, 600 degrees C) the Ti-Zr alloy was casted separately. The surface roughness of the castings was calculated by instrument of smooth finish (China). From the surface to the inner part the Knoop hardness and thickness in reacted layer of Ti-Zr alloy casting was measured. The structure of the surface reacted layer was analysed by SEM. Elemental analyses of the interfacial zone of the casting was made by element line scanning observation. RESULTS: The surface roughness of the castings was increased significantly with the mold temperature increasing. At a higher mold temperature the Knoop hardness of the reactive layer was increased. At the three mold temperature the outmost surface was very hard, and microhardness data decreased rapidly where they reached constant values. The thickness was about 85 microns for castings at room temperature and 300 degrees C, 105 microns for castings at 600 degrees C. From the SEM micrograph of the Ti-Zr alloy casting, the surface reacted layer could be divided into three different layers. The first layer was called non-structure layer, which thickness was about 10 microns for room temperature group, 20 microns for 300 degrees C and 25 microns for 600 degrees C. The second layer was characterized by coarse-grained acicular crystal, which thickness was about 50 microns for three mold temperatures. The third layer was Ti-Zr alloy. The element line scanning showed non-structure layer with higher level of element of O, Al, Si and Zr, The higher the mold temperature during casting, the deeper the Si permeating and in the second layer the element Si could also be found. CONCLUSION: The mold temperature is one of the major factors influencing to casting quality. In order to reduce the surface reacted layer of Ti-Zr alloy castings, the lower mold temperature and the investment without Si should be chosen.

Dental Alloys↗

[Study on biodegradation of phenols in river water].

This study on the biodegradation of phenols (phenol, o-methylphenol, o-chlorophenol and resorcinol) in river water was conducted by changing the main influential factors respectively. The results of experiment showed the phenols were greatly degradated in mild temperature, neutral pH and plenty of oxygen and the rank of the phenols biodegradation from great to small was resorcinol, phenol, o-methylphenol and o-chlorophenol. Presented in this paper is also a discussion on the biodegradation mechanism of phenols.

Biodegradation, Environmental↗

[Study on the mechanism of hemocompatibility of titanium oxide films].

In this paper a study on the facts affecting blood compatibility of titanium oxide films synthesized by ion beam assisted deposition is presented, and the mechanism of blood compatibility is discussed. We think that the blood compatibility is determined by surface energy and work function of the film. The protein adsorption is determined by surface energy. An area with a range of values of polar and dispersion components of surface energies, where good protein adsorption property will exhibit, was defined. That is, more human serum albumin (HSA) and less human fibrinogen (HFG) will be adsorbed in this area. Work function is also an important factor to influence blood compatibility. Low work function can inhibit the decomposition of HFG and improve thromboresistance.

Adsorption↗

[Alteration of free radical generation in pulmonary tissue after quick decompression].

The purpose of this experiment was to evaluate decompression-induced pulmonary injury by means of measurement of ascorbate free radical (Vc-.) alteration in pulmonary tissue of the rats which experienced rapid decompression. 29 male S-D rats were divided into 4 groups: A was executed at 45 min post-decompression; B was control for A; C was executed at 90 min; D was ontrol for C. Group A and group C were to compress up to 0.5 MPa(air) and stay for 60 min, then were decompressed smoothly to normbaric in 1 min. The 0.05 M N-tert-butyl-alpha-phenylnitrone (PBN) was given at 20 min after completion of decompression (groups A and B) or at 65 min (groups C and D). At 25 min after PBN injection the animals were killed by cutting arteria coeliaca, and 0.75 g pulmonary tissues were taken. These tissues were homogenized for electron paramagnetic resonance (EPR) assay. The results demonstrated that the ascorbate free radical (Vc-.) signals were obtained at all samples. The intensity of signals measured in group C rose markedly (P < 0.05) and that in group A was close to control's. So it can be concluded that rapid decompression would increase the generation of free radical in lung.

Animals↗

Quantitative study of basic fibroblast growth factor in vitreous with proliferative vitreoretinopathy.

OBJECTIVE: To quantitatively study basic fibroblast growth factor (bFGF) in the vitreous of proliferative vitreoretinopathy (PVR) in order to understand the role of bFGF in the development of PVR. METHOD: High sensitive sandwich enzyme immunoassay technique (ELISA) was used to measure bFGF level in vitreous of normal eyes, the eyes of PVR-C or PVR-D grade, eyes of vitreous hemorrhage and the serum levels of bFGF in PVR-D patients. RESULTS: The levels of bFGF in the vitreous were: median 5.20 ng/L, quartile 15.47 ng/L in 20 normal eyes; median 3.12 ng/L, quartile 10.48 ng/L in 35 PVR-C eyes; median 46.56 ng/L, quartile 113.96 ng/L in 26 PVR-D eyes; median 1.40 ng/L, quartile 6.25 ng/L in 25 vitreous hemorrhage eyes. The vitreous bFGF level in PVR-D group was significantly higher than that in the normal group, PVR-C group and vitreous hemorrhage group (P < 0.01). The mean of serum-bFGF level was 18.33 +/- 3.39 ng/L. The vitreous bFGF level of PVR-D group was significantly higher than serum-bFGF level (P < 0.01). And the vitreous-bFGF level in PVR-D group was significantly higher in larger retinal tear subgroup. CONCLUSION: The results suggested that bFGF is involved in the development of PVR.

Adult↗

[The development of an intelligent acoustic impedance middle ear analyzer].

This thesis introduces the measuring principle, device composition and main functions of an intelligent acoustic impedance middle ear analyzer. As well the results of clinical trial are analyzed in this paper. As an objective diagnostic method, aural acoustic impedance measuring device holds a very important position in diagnosing ear diseases and hearing obstacles.

Acoustic Impedance Tests↗

[Upper airway occlusion sites of obstructive sleep apnea].

OBJECTIVE: To locate the obstruction sites in patients with obstructive sleep apnea syndrome (OSAS) during sleep by MRI imaging and dynamic fiberoptic pharyngoscopy. METHODS: Fifteen OSAS patients confirmed by polysomnography (PSG) underwent ultrafast MR imaging during sleep. Their sequential midline sagittal and axial images were obtained and displayed in the cine mode. Then we examined the upper airway of the retropalate region (RP), retroglottal region (RG) and epiglottal region (EPG). We also did dynamic fiberoptic pharyngoscopy examination during sleep in 8 patients in another night. RESULTS: Among the 15 patients, 3 had only RP region obstruction, 2 had only RG region obstruction, and the other 10 had both RP & RG airway obstruction. In the 8 cases monitored with both MRI and fiberoptic pharyngoscopy, the results obtained from the 2 methods were identical. CONCLUSION: MRI and fiberoptic pharyngoscopy are useful in locating the pharyngeal airway obstruction sites of OSAS patients and would be helpful in selecting treatment measures.

Adult↗