Search PubMed⌕ Search

Biomedical subjects

C Lazdunski

Publications and source records attributed to C Lazdunski.

At least 37 records · Page 2Linked to original sources

Maturation and localization of the TolB protein required for colicin import.

The tolB gene has been shown previously to encode two proteins of 47.5 kDa (TolB) and 43 kDa (TolB*). To explain the presence of these two forms, two hypotheses have been proposed: TolB might be posttranslationally processed to TolB*, or an internal in-frame translation initiation resulting in TolB* may occur (S. K. Levengood and R. E. Webster, J. Bacteriol. 171:6600-6609, 1989). To address this question, TolB was tagged by inserting in its C-terminal region an epitope recognized by monoclonal antibody 1C11 without altering the function of TolB. It was then demonstrated that the functional protein corresponded to TolB*, the mature periplasmic protein, and that TolB was its precursor form, which was observed only when the protein was overexpressed. These two forms were purified by immunoprecipitation, and their N-terminal sequences were determined. An antibody directed against TolB was raised, which confirmed the results obtained with the tagged TolB.

Amino Acid Sequence↗

DNA sequence determinants of LexA-induced DNA bending.

The LexA repressor from Escherichia coli induces DNA bending upon interaction with the two overlapping operators which regulate the transcription of the colicin A encoding gene caa. Both caa operators harbor T-tracts adjacent to their recognition motifs. These tracts have been suggested to be especially favorable for the promotion of LexA-induced DNA bending. Here we show that this is indeed the case, since disruption of the TTTT-tract adjacent to operator O1 by the replacement of the two central thymine bases by AA, GA or CG markedly reduces LexA-induced DNA bending. Simple A.T-richness in this position is thus not sufficient to promote full LexA-induced bending, albeit a TAAT sequence is always more efficient to promote bending than those sequences containing one or two C/G base pairs.

Bacterial Proteins↗

Recognition of the colicin A N-terminal epitope 1C11 in vitro and in vivo in Escherichia coli by its cognate monoclonal antibody.

We demonstrate that the 1C10 monoclonal antibody (mAb) directed against the N-terminal domain of the colicin A recognizes a 13 residue-region (13Thr-Gly-Trp-Ser-Ser-Glu-Arg-Gly-Ser-Gly-Pro- Asp-Pro25). When this peptide is inserted into a protein in the amino-terminal or an internal position, the tagged protein is efficiently detected by the 1C11 mAb either by immunoblotting or immunoprecipitation. In vitro, the minimal structure required for detection using the pepscan system is 19Arg-Gly-Ser-Gly-Pro-Glu-Pro25, indicating that in vivo the proper exposure of the epitope requires additional residues. The construction of a versatile vector allowing overproduction of tagged proteins is described. Various applications of the 1C11 epitope are mentioned. This epitope did not alter the function of any of the proteins so far tested.

Amino Acid Sequence↗

Characterization of the arcD arginine:ornithine exchanger of Pseudomonas aeruginosa. Localization in the cytoplasmic membrane and a topological model.

The arcDABC operon of Pseudomonas aeruginosa encodes the enzymes of the arginine deiminase pathway and is induced by oxygen limitation. The arcD gene specifies a 53-kDa protein with arginine: ornithine exchange activity. The ArcD protein of P. aeruginosa, like the LysI lysine transporter of Corynebacterium glutamicum, has 13 hydrophobic regions which could span the cytoplasmic membrane. Fusion of a Caa (colicin A) epitope to the N-terminal part of ArcD permitted the localization, by immunoblotting, of the hybrid protein in the inner membrane of P. aeruginosa. Fusion of PhoA (alkaline phosphatase) to the very C terminus of ArcD produced another hybrid protein, which exhibited PhoA activity. Both ArcD hybrid proteins retained arginine transport activity and served to support a topological model which proposes that the N terminus is oriented toward the cytoplasm and the C terminus faces the periplasm. Further ArcD-PhoA fusions were consistent with this model. When the Caa epitope was fused to a C-terminal ArcD fragment consisting of only 5 hydrophobic domains, the resulting hybrid protein could be recovered intact from the inner membrane, suggesting that the C-terminal part of ArcD contains sufficient information for insertion into the membrane. This study illustrates the utility of the Caa epitope to tag membrane proteins.

Alkaline Phosphatase↗

Colicin A lysis protein promotes extracellular release of active human growth hormone accumulated in Escherichia coli cytoplasm.

The colicin A lysis protein (Cal) was used to direct the extracellular release of recombinant proteins produced in Escherichia coli. The cal gene, under the control of its inducible promoter, was introduced into an expression vector encoding the human growth hormone devoid of its signal sequence (Met-hGH). Cal and Met-hGH were simultaneously expressed at two different levels of Met-hGH induction. The results indicate that Cal causes the excretion of non-aggregated Met-hGH from the cytoplasm to the culture medium and that the Met-hGH is correctly folded since the released Met-hGH is antigenically indistinguishable from the authentic mature hGH and is biologically active in binding to specific receptor sites.

Bacterial Proteins↗

Targeting of interleukin-2 to the periplasm of Escherichia coli.

A synthetic gene coding for interleukin-2 (IL-2) was used to produce large amounts of recombinant IL-2 (met-IL-2) in Escherichia coli. Met-IL-2 was found to accumulate in the cytoplasm in an insoluble, aggregated form. Inclusion bodies located at the pole caps of cells were detected using immunogold labelling. Constructs were designed to fuse the IL-2 gene to DNA fragments encoding signal peptides for an outer-membrane protein (OmpA) or for a periplasmic protein (PhoA) of E. coli. No significant maturation was observed with these fusion proteins which were found in an insoluble form in the cytoplasm. The influence of charge disposition at the N-terminus of the mature portion of the protein was investigated by replacing positively charged amino acids with glutamic acid. None of the introduced substitutions had any effect. Various factors that might affect expression, secretion and folding were examined in an attempt to obtain secretion. By fusing IL-2 to the precursor maltose-binding protein (preMBP) a large fraction of the preMBP-IL-2 protein was correctly processed and transported to the periplasmic space. IL-2 derived from MBP-IL-2 after FXa cleavage possessed similar specific activity to recombinant IL-2 produced in Chinese Hamster ovary cells.

Amino Acid Sequence↗

Acidic interaction of the colicin A pore-forming domain with model membranes of Escherichia coli lipids results in a large perturbation of acyl chain order and stabilization of the bilayer.

2H and 31P NMR techniques were used to study the effects on acyl chain order and lipid organization of the well-characterized pore-forming domain of colicin A (20-kDa thermolytic fragment of colicin A) upon insertion in model membrane systems derived from the Escherichia coli fatty acid auxotrophic strain K 1059, which was grown in the presence of [11,11-2H2]-labeled oleic acid. Addition of the protein to dispersions of the E. coli total lipid extract, in a 1/70 molar ratio of peptide to lipids, resulted in a large pH-dependent decrease in quadrupolar splitting of the 2H NMR spectra. The decrease of the quadrupolar splitting obtained at the various pH values was correlated with the pH dependence of the insertion of the protein in monolayer films using the same E. coli lipid extracts. The pK governing the perturbing effects on the order of the fatty acyl chains was around 5, in agreement with the values of the pH-dependent conformational changes of the pore-forming domain of colicin A required for membrane insertion as reported by van der Goot et al. [(1991) Nature 354, 408-410]. 31P NMR measurements show that the bilayer organization remains intact upon addition of the protein to dispersions of lipid extract. Surprisingly, 31P NMR measurements as a function of temperature indicate that the pore-forming domain of colicin A even stabilizes bilayer lipid structure at pH 4. Both the large effect of the protein on acyl chain order and its bilayer-stabilizing activity are indicative of a surface localization of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)

Colicins↗

Colicin A unfolds during its translocation in Escherichia coli cells and spans the whole cell envelope when its pore has formed.

The addition of the pore forming colicin A to Escherichia coli cells results in an efflux of cytoplasmic potassium. This efflux is preceded by a lag time which is related to the time needed for the translocation of the toxin through the envelope. Denaturing the colicin A with urea, before adding it to the cells, did not affect the properties of the pore but decreased the lag time. After renaturation, the lag time was similar to that of the native colicin. This suggests that the unfolding of colicin A accelerates its translocation. The addition of trypsin, which has access neither to the periplasmic space nor to the cytoplasmic membrane, resulted in an immediate arrest of the potassium efflux induced by colicins A and B. The possibility that trypsin may act on a bacterial component required for colicin reception and/or translocation was ruled out. It is thus likely that the arrest of the efflux corresponds to a closing of the pores. This long distance effect of trypsin suggests that part of the polypeptide chain of the colicins may still be in contact with the external medium even when the pore has formed in the inner membrane.

Cell Membrane↗

An alpha-helical hydrophobic hairpin as a specific determinant in protein-protein interaction occurring in Escherichia coli colicin A and B immunity systems.

A collection of chimeric pore-forming domains between colicins A and B was constructed to investigate the specific determinants responsible for recognition by the corresponding immunity proteins. The fusion sites in the hybrid proteins were positioned according to the three-dimensional structure of the soluble form of the colicin A pore-forming domain. The hydrophobic hairpin of colicin pore-forming domains, buried in the core of the soluble structure, was the main determinant recognized by the integral immunity proteins. The immunity protein function may require helix-helix recognition within the lipid bilayer.

Amino Acid Sequence↗

Secondary structure of the membrane-bound form of the pore-forming domain of colicin A. An attenuated total-reflection polarized Fourier-transform infrared spectroscopy study.

The structure of the pore-forming domain of the bacterial toxin colicin A was studied by attenuated total-reflection polarized Fourier-transform infrared spectroscopy. This channel-forming fragment interacts with dimyristoylglycerophosphoglycerol (Myr2GroPGro) vesicles and forms disk-like complexes. Analysis of the shape of the amide I' band indicates that its secondary structure is not affected by the pH 5.0-7.2. However, 5-10% of the peptide amino acids adopt an alpha-helical structure upon complex formation with Myr2GroPGro, while the random-coil and beta-sheet structure contents decrease. Interestingly, the increase in alpha-helical content is essentially due to an increase in the high-frequency component of the alpha-helical domain of amide I'. The fact that only this component was 90 degrees polarized (i.e. the helix is parallel to the acyl chain) suggests that only this particular type of helix is associated with the Myr2GroPGro bilayer.

Colicins↗

Construction, expression and release of hybrid colicins.

Colicins A and E1 are two pore-forming colicins sharing homology in their C-terminal domains but not in their N-terminal or central domains. Using site-directed mutagenesis, restriction sites were inserted at the proper locations to allow recombination of these domains. Six different constructs were obtained. All these proteins were expressed in Escherichia coli and properly recognized by monoclonal antibodies directed against epitopes located in different domains of colicin A. Out of the six hybrids, only two were released to the extracellular medium. Immunocytolocalization indicated that some of the hybrids aggregated within the cytoplasm. With some hybrids, the defect in release was related to a defect in synthesis of the lysis protein that normally promotes release.

Antibodies, Monoclonal↗

Individual domains of colicins confer specificity in colicin uptake, in pore-properties and in immunity requirement.

Six different hybrid colicins were constructed by recombining various domains of the two pore-forming colicins A and E1. These hybrid colicins were purified and their properties were studied. All of them were active against sensitive cells, although to varying degrees. From the results, one can conclude that: (1) the binding site of OmpF is located in the N-terminal domain of colicin A; (2) the OmpF, TolB and TolR dependence for translocation is also located in this domain; (3) the TolC dependence for colicin E1 is located in the N-terminal domain of colicin E1; (4) the 183 N-terminal amino acid residues of colicin E1 are sufficient to promote E1AA uptake and thus probably colicin E1 uptake; (5) there is an interaction between the central domain and C-terminal domain of colicin A; (6) the individual functioning of different domains in various hybrids suggests that domain interactions can be reconstituted in hybrids that are fully active, whereas in others that are much less active, non-proper domain interactions may interfere with translocation; (7) there is a specific recognition of the C-terminal domains of colicin A and colicin E1 by their respective immunity proteins.

Bacterial Outer Membrane Proteins↗

Interaction of a regulatory protein with a DNA target containing two overlapping binding sites.

The LexA repressor from Escherichia coli regulates the transcription of about 20 different genes upon binding to single or multiple operators. In this work we study the interaction of LexA with the control region of the caa gene (coding for the bacterial toxin colicin A) that contains two operators (O1 and O2) which overlap by at least 2 base pairs relevant for sequence specific DNA recognition. This arrangement raises the question of how the LexA molecules which bind to the central overlapping part of the two operators avoid steric clashes and further, of whether the interaction of LexA with the two operators is cooperative or not. To address these questions we have constructed two mutant operators (O1+O2- and O1-O2+) for which the two most strongly conserved base pairs in each of the external operator half-sites have been mutated. Using methylation interference with the complex formation of LexA with the wild-type and these two mutant operators we could show: 1) that the two mutant operators behave symmetrically in that the methylation of one crucial guanine base in both operator half-sites interferes strongly with complex formation, 2) but that in the wild-type operator (containing four functional operator half-sites) only the two external half-operators give rise to interference if this crucial guanine base is methylated, whereas methylation of the two equivalent guanine bases within the two central (overlapping) operator half-sites does not lead to interference with the formation of a complex where both operators are occupied simultaneously. These data suggest that the centrally bound LexA molecules adopt a somewhat different binding mode than those bound to the external half-operators in order to avoid steric clashes and/or to optimize protein-protein contacts which are likely to be at the origin of the binding cooperativity that we could demonstrate by quantitative DNase I footprinting and gel retardation experiments. While the methylation interference experiments revealed a non-equivalence for the binding of externally and centrally bound LexA molecules, both methylation protection and hydroxyl radical footprinting were unable to reveal this difference, suggesting that the difference between the two binding modes should be fairly subtle.

Bacterial Proteins↗

Protein import into Escherichia coli: colicins A and E1 interact with a component of their translocation system.

Colicins are antibiotic proteins that kill sensitive Escherichia coli cells. Their mode of action involves three steps: binding to specific receptors located in the outer membrane, translocation across this membrane, and action on their targets. A specific colicin domain can be assigned to each of these steps. Colicins have been subdivided into two groups (A and B) depending on the proteins required for them to cross the external membrane. Plasmids were constructed which led to an overproduction of the Tol proteins involved in the import of group A colicins. In vitro binding of overexpressed Tol proteins to either Tol-dependent (group A) or TonB-dependent (group B) colicins was analyzed. The Tol dependent colicins A and E1 were able to interact with TolA but the TonB dependent colicin B was not. The C-terminal region of TolA, which is necessary for colicin uptake, was also found to be necessary for colicin A and E1 binding to occur. Furthermore, only the isolated N-terminal domain of colicin A, which is involved in the translocation step, was found to bind to TolA. These results demonstrate the existence of a correlation between the ability of group A colicins to translocate and their in vitro binding to TolA protein, suggesting that these interactions might be part of the colicin import process.

Amino Acid Sequence↗

Phospholipase-A-independent damage caused by the colicin A lysis protein during its assembly into the inner and outer membranes of Escherichia coli.

The requirement for the activation of phospholipase A by the colicin A lysis protein (Cal) in the efficient release of colicin A by Escherichia coli cells containing colicin A plasmids was studied. In particular, we wished to determine if this activation is the primary effect of Cal or whether it reflects more generalized damage to the envelope caused by the presence of large quantities of this small acylated protein. E. coli tolQ cells, which were shown to be leaky for periplasmic proteins, were transduced to pldA and then transformed with the recombinant colicin A plasmid pKA. Both the pldA and pldA+ strains released large quantities of colicin A following induction, indicating that in these cells phospholipase A activation is not required for colicin release. This release was, however, still dependent on a functioning Cal protein. The assembly and processing of Cal in situ in the cell envelope was studied by combining pulse-chase labelling with isopycnic sucrose density gradient centrifugation of the cell membranes. Precursor Cal and lipid-modified precursor Cal were found in the inner membrane at early times of chase, and gave rise to mature Cal which accumulated in both the inner and outer membrane after further chase. The signal peptide was also visible on these gradients, and its distribution too was restricted to the inner membrane. Gradient centrifugation of envelopes of cells which were overproducing Cal resulted in very poor separation of the membranes. The results of these studies provide evidence that the colicin A lysis protein causes phospholipase A-independent alterations in the integrity of the E. coli envelope.(ABSTRACT TRUNCATED AT 250 WORDS)

Bacterial Proteins↗

A 136-amino-acid-residue COOH-terminal fragment of colicin A is endowed with ionophoric activity.

DNA regions encoding the various domains of a protein can be expressed as separate entities by inserting at appropriate sites a 'STOP-Shine-Dalgarno-sequence-ATG' cassette encoding a termination codon, a Shine-Dalgano sequence and an initiation codon within the structural gene. This technique has been used to obtain a 137-amino-acid-residue pore-forming protein designated DA70C comprising the final 136-amino-acid-residue COOH-terminal of colicin A preceded by an NH2-terminal methionine. Da70C was correctly expressed but poorly released to the extracellular medium. Its purification involved, as a final step, a partition in Triton X-114 thus demonstrating that hydrophobic regions are exposed in this protein. The ability of DA70C to form ion channels in planar lipid bilayers was investigated and pore properties were analyzed. The results indicate that helices 1-3 of the 204-amino-acid-residue colicin pore-forming domain (containing 10 alpha-helices) are not involved in ion conduction through the channel. However, they are important in maintaining the stability of the soluble state of the COOH-terminal domain.

Amino Acid Sequence↗

In vivo properties of colicin A: channel activity is voltage dependent but translocation may be voltage independent.

The kinetics of K+ efflux caused by colicin A in Escherichia coli-sensitive cells have been investigated by using a K(+)-selective electrode. The order of magnitude of the rate of K+ efflux per colicin molecule was comparable to that of ion channels. The dependence of K+ efflux upon multiplicity, pH, temperature, and membrane potential (delta psi) was determined. The translocation of colicin A from the outer membrane receptor to the inner membrane and insertion into the inner membrane required a fluid membrane, but once inserted, the channel properties showed little dependence upon the state of the lipids. At a given multiplicity, the lag time before the onset of K+ efflux was found to reflect the time required for translocation and/or insertion of colicin into the cytoplasmic membrane. Opening of the channel only occurred above a threshold value of delta psi of 85 +/- 10 and 110 +/- 5 mV at pH 6.8 and 7.8, respectively. Conditions were designed for closing and reopening of the channel in vivo. These conditions allowed us to test separately the delta psi requirements for translocation and channel opening: translocation and/or insertion did not appear to require delta psi. The channel formed in vivo featured properties similar to that of the channel in lipid planar bilayers.

Cell Membrane↗

Involvement of OmpF during reception and translocation steps of colicin N entry.

[125I]-colicin N binds to OmpF receptor sites (70,000 per cell) with an average Kassoc of 3.2 x 10(6) M-1 at 23 degrees C. Monoclonal antibody directed against a cell-surface-exposed epitope of OmpF is able to complete with the binding of the colicin in vitro and also to protect against colicin N in vivo. OmpF is an absolute requirement for colicin N uptake. OmpC cannot serve as a substitute for OmpF during translocation across the outer membrane under receptor bypass conditions, which is in contrast to colicin A. Colicin N does not cross-react with various monoclonal antibodies directed against colicin A.

Antibodies, Monoclonal↗