Search PubMed⌕ Search

Biomedical subjects

C L Borders

Publications and source records attributed to C L Borders.

At least 19 recordsLinked to original sources

Creatine kinase: a role for arginine-95 in creatine binding and active site organization.

Sequence homology analysis reveals that arginine-95 is fully conserved in 29 creatine kinases sequenced to date, but fully conserved as a tyrosine residue in 16 arginine kinases. Site-directed mutants of rabbit muscle creatine kinase (rmCK) were prepared in which R95 was replaced by a tyrosine (R95Y), alanine (R95A), or lysine (R95K). Kinetic analysis of phosphocreatine formation for each purified mutant showed that recombinant native rmCK and all R95 mutants follow a random-order, rapid-equilibrium mechanism. However, we observed no evidence for synergism of substrate binding by the recombinant native enzyme, as reported previously [Maggio et al., (1977) J. Biol. Chem. 252, 1202-1207] for creatine kinase isolated directly from rabbit muscle. The catalytic efficiencies of R95Y and R95A are reduced approximately 3000- and 2000-fold, respectively, compared to native enzyme, but that of R95K is reduced only 30-fold. The major contribution to the reduction of the catalytic efficiency of R95K is a 5-fold reduction in the affinity for creatine. This suggests that while a basic residue is required at position 95 for optimal activity, R95 is not absolutely essential for binding or catalysis in CK. R95Y has a significantly lower affinity for creatine than the native enzyme, but it also displays a somewhat lower affinity for MgATP and 100-fold reduction in k(cat). Interestingly, R95A appears to bind either creatine or MgATP first with affinities similar to those for the native enzyme, but it has a 10-fold lower affinity for the second substrate, suggesting that replacement of R95 by an alanine disrupts the active site organization and reduces the efficiency of formation of the catalytically competent ternary complex.

Amino Acid Substitution↗

Characterization of recombinant Saccharomyces cerevisiae manganese-containing superoxide dismutase and its H30A and K170R mutants expressed in Escherichia coli.

All known Mn-containing superoxide dismutases (MnSODs) have a highly conserved histidine (His-30 in Escherichia coli FeSOD) in the active-site channel, and nearly all have an active-site arginine (Arg-170) that has been proposed to play a combined structural and functional role [Chan et al., Arch. Biochem. Biophys. 279, 195-201 (1990)]. In Saccharomyces cerevisiae MnSOD, the active-site arginine is replaced by a lysine. The S. cerevisiae MnSOD gene has been cloned and expressed in E. coli, and H30A and K170R site-specific mutants have been prepared. The purified recombinant native (RN) and mutant enzymes were compared to one another and to the native enzyme purified from S. cerevisiae (SC) in terms of activity, temperature stability, and sensitivity to 2,4,6-trinitrobenzenesulfonate (TNBS) and phenylglyoxal (PG). All enzymes had high specific activities (SC = 5000, RN = 5600, H30A = 4500, K170R = 4600) (U/mg, using the pyrogallol assay). SC, RN, and H30A were very stable at 75 degreesC (pH 8.0), with half-lives of 4.7, 2.8, and 2.7 h, respectively, while K170R had a much greater temperature lability, with a half-life of 0.36 h under these conditions. TNBS (0.5 mM, pH 9.0, 25 degreesC) rapidly inactivated SC, RN, and H30A, with half-lives of 3. 5, 5.1, and 5.5 min, respectively, but only slowly inactivated K170R, with a half-life of 101 min. PG (20 mM, pH 9.0, 25 degreesC) caused very slow inactivation of SC, RN, and H30A by biphasic kinetics, and each enzyme retained >/=25% activity after 3 h of modification. K170R, on the other hand, was completely inactivated by PG under these conditions by first-order kinetics, with a half-life of 7.0 min. The data suggest that His-30, a residue highly conserved in the active-site channel of MnSODs and FeSODs, does not play a crucial role in catalysis or stability. In addition, Lys-170, a residue that is almost always arginine in the numerous other MnSODs and FeSODs sequenced to date, can be replaced by arginine with no loss of catalytic activity, but K170R is less stable and Arg-170 in this mutant is more exposed than the corresponding arginine in other SODs. RN and SC showed some surprising differences. Thus, while the specific activities of RN and SC are very similar, SC is more stable to inactivation at 75 degreesC, and less susceptible to inactivation by phenylglyoxal, than RN. These data suggest that there may be slight differences in the tertiary structures of SC, the native enzyme expressed in S. cerevisiae, and RN, the recombinant native enzyme expressed in E. coli.

Alanine↗

Creatine kinase: essential arginine residues at the nucleotide binding site identified by chemical modification and high-resolution tandem mass spectrometry.

Phenylglyoxal is an arginine-specific reagent that inactivates creatine kinase (CK). Previous results suggest that modification of the dimeric enzyme at a single arginine residue per subunit causes complete inactivation accompanied by the loss of nucleotide binding; the actual site of modification was not identified. Here, high-resolution tandem mass spectrometry (MS/MS) was used to identify three phenylglyoxal-modified Arg residues in monomeric rabbit muscle CK. Electrospray ionizaton Fourier-transform MS of the phenylglyoxal-modified CK that had lost approximately 80% activity identified three species: unmodified, once-modified (+116 Da), and twice-modified (+232 Da) enzyme in a ratio of approximately 1:4:1. MS/MS restricts the derivatized sites to P122-P212 and P283-V332, whereas MS of Lys-C digestions revealed two modified peptides, A266-K297 and G116-K137. The only Arg in A266-K297 is Arg-291 (invariant), whereas MS/MS of modified G116-K137 shows that two of the three sites Arg-129, Arg-131, or Arg-134 (all invariant) can contain the modification. The recently reported x-ray crystal structure for the octameric chicken mitochondrial CK indicates that its nucleotide triphosphate-binding site indeed contains the equivalent of R291, R129, and R131 reported here to be at the active site of rabbit muscle CK.

Animals↗

Rabbit muscle creatine kinase: consequences of the mutagenesis of conserved histidine residues.

Creatine kinase (CK; EC 2.7.3.2) catalyzes the reversible conversion of creatine and MgATP to phosphocreatine and MgADP. In the absence of an X-ray crystal structure, we have used the sequence homology of creatine kinases and other guanidino kinases from a variety of sources to identify the conserved histidine residues in rabbit muscle CK, as well as to try to pinpoint a reactive histidine that has been implicated in the active site. This residue has been proposed to act as a general acid/base catalyst assisting in the phosphoryl transfer mechanism [Cook et al. (1981) Biochemistry 20, 1204-1210]. There are 17 histidine residues in rabbit muscle CK, and of these, only five have been conserved in all guanidino kinase sequences published to date [Mühlebach et al. (1994) Mol. Cell. Biochem. 133, 245-62]. In rabbit muscle CK, these residues are H96, H105, H190, H233, and H295. We have carried out site-specific mutagenesis of these five histidine residues, replacing each with an asparagine. Each of these mutants exhibited enzymatic activity but to varying degrees. The H105N, H190N, and H233N mutants displayed specific activities similar to that of the wild-type enzyme. H96N has high activity, but appears to be quite unstable, losing catalytic activity upon cell lysis by sonication and/or chromatographic steps involved in purification. H295N shows a significantly reduced catalytic activity relative to the native enzyme, due to marked decreases in kcat and the affinities for both substrates. Each of the five mutants is inactivated by diethyl pyrocarbonate (DEP), and inactivation is reversible upon incubation with hydroxylamine. However, only H295N shows a dramatically reduced rate of inactivation relative to native CK, consistent with H295 being the residue modified by DEP in the native enzyme. These intriguing results indicate that four of the conserved histidines (H96, H105, H295, and H233) are not essential for activity, and while H295 may be at the active site of CK, it is unlikely to play the role of a general acid/base catalyst.

Amino Acid Sequence↗

A structural role for arginine in proteins: multiple hydrogen bonds to backbone carbonyl oxygens.

We propose that arginine side chains often play a previously unappreciated general structural role in the maintenance of tertiary structure in proteins, wherein the positively charged guanidinium group forms multiple hydrogen bonds to backbone carbonyl oxygens. Using as a criterion for a "structural" arginine one that forms 4 or more hydrogen bonds to 3 or more backbone carbonyl oxygens, we have used molecular graphics to locate arginines of interest in 4 proteins: Arg 180 in Thermus thermophilus manganese superoxide dismutase, Arg 254 in human carbonic anhydrase II, Arg 31 in Streptomyces rubiginosus xylose isomerase, and Arg 313 in Rhodospirillum rubrum ribulose-1,5-bisphosphate carboxylase/oxygenase. Arg 180 helps to mold the active site channel of superoxide dismutase, whereas in each of the other enzymes the structural arginine is buried in the "mantle" (i.e., inside, but near the surface) of the protein interior well removed from the active site, where it makes 5 hydrogen bonds to 4 backbone carbonyl oxygens. Using a more relaxed criterion of 3 or more hydrogen bonds to 2 or more backbone carbonyl oxygens, arginines that play a potentially important structural role were found in yeast enolase, Bacillus stearothermophilus glyceraldehyde-3-phosphate dehydrogenase, bacteriophage T4 and human lysozymes, Enteromorpha prolifera plastocyanin, HIV-1 protease, Trypanosoma brucei brucei and yeast triosephosphate isomerases, and Escherichia coli trp aporepressor (but not trp repressor or the trp repressor/operator complex).(ABSTRACT TRUNCATED AT 250 WORDS)

Aldose-Ketose Isomerases↗

The positive charge at position 189 is essential for the catalytic activity of iron- and manganese-containing superoxide dismutases.

We have previously shown (C.L. Borders, Jr. et al., (1989) Archives of Biochemistry and Biophysics, 268, 74-80) that the iron-containing (FeSOD) and manganese-containing (MnSOD) superoxide dismutases from Escherichia coli are extensively (greater than 98%) inactivated by treatment with phenylglyoxal, an arginine-specific reagent. Examination of the published primary sequences of these two enzymes shows that Arg-189 is the only conserved arginine. This arginine is also conserved in the three additional FeSODs and seven of the eight additional MnSODs sequenced to date, with the only exception being the MnSOD from Saccharomyces cerevisiae, in which it is conservatively replaced by lysine. Treatment of S. cerevisiae MnSOD with phenylglyoxal under the same conditions used for the E. coli enzymes gives very little inactivation. However, treatment with low levels of 2,4,6-trinitrobenzenesulfonate (TNBS) and acetic anhydride, two lysine-selective reagents that cause a maximum of 65-80% inactivation of the E. coli SODs, gives complete inactivation of the yeast enzyme. Total inactivation of yeast MnSOD with TNBS correlates with the modification of approximately 5 lysines per subunit, whereas 6-7 lysines per subunit are acylated with acetic anhydride on complete inactivation. It appears that the positive charge contributed by residue 189, lysine in yeast MnSOD and arginine in all other SODs, may be critical for the catalytic activity of MnSODs and FeSODs.

Amino Acid Sequence↗

The enzymic nature of antibody catalysis: development of multistep kinetic processing.

Detailed kinetic investigations of a catalytic antibody that promotes the hydrolyses of an anilide and phenyl ester show that this catalyst uses a multistep kinetic sequence resembling that found in serine proteases to hydrolyze its substrates, although antibody was elicited to a single transition-state analog. Like the serine proteases the antibody catalyzes the hydrolysis reactions through a putative covalent intermediate, but unlike the enzymes it may use hydroxide ion to cleave the intermediates. Nevertheless, the antibody is a potent catalyst with turnover at higher pH values rivaling that of chymotrypsin. This analysis also reveals that turnover by the antibody is ultimately limited by product desorption, suggesting that improvements in catalytic efficiency may be achieved by judicious changes in the structure of the substrate, so that it is not superimposable on that of the eliciting hapten.

Acylation↗

Evidence that chemical modification of a positively charged residue at position 189 causes the loss of catalytic activity of iron-containing and manganese-containing superoxide dismutases.

The Escherichia coli, Bacillus stearothermophilus, and human manganese-containing superoxide dismutases (MnSODs) and the E. coli iron-containing superoxide dismutase (FeSOD) are extensively inactivated by treatment with phenylglyoxal, an arginine-specific reagent. Arg-189, the only conserved arginine in the primary sequences of these four enzymes, is also conserved in the three additional FeSODs and five of the six additional MnSODs sequenced to date. The only exception is Saccharomyces cerevisiae MnSOD, in which it is conservatively replaced by lysine. Treatment of S. cerevisiae MnSOD with phenylglyoxal under the same conditions used for the other SODs gives very little inactivation. However, treatment with low levels of 2,4,6-trinitrobenzenesulfonate (TNBS) or acetic anhydride, two lysine-selective reagents that cause a maximum of 60-80% inactivation of the other four SODs, gives complete inactivation of the yeast enzyme. Total inactivation of yeast MnSOD with TNBS correlates with the modification of approximately five lysines per subunit, whereas six to seven acetyl groups per subunit are incorporated on complete inactivation with [14C]-acetic anhydride. It appears that the positive charge contributed by residue 189, lysine in yeast MnSOD and arginine in all other SODs, is critical for the catalytic function of MnSODs and FeSODs.

Amino Acid Sequence↗

Stability of water-soluble carbodiimides in aqueous solution.

A dimethylbarbituric acid reagent has been used to follow the kinetics of loss of two water-soluble carbodiimides, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and the structurally related 1-ethyl-3-(4-azonia-4,4-dimethylpentyl) carbodiimide (EAC), in aqueous solution as a function of pH and added chemical reagents. In 50 mM 2-(N-morpholino)ethanesulfonic acid at 25 degrees C, EDC has t1/2 values of 37, 20, and 3.9 h at pH 7.0, 6.0, and 5.0, respectively, while the corresponding values for EAC are 12, 2.9, and 0.32 h. Iodide, bromide, or chloride, at 0.1 M, has very little or no effect on carbodiimide stability. However, 0.1 M glycine methyl ester or 0.1 M ethylenediamine causes a significant increase in the rate of loss of EAC and EDC, while the presence of 0.1 M phosphate, 0.1 M hydroxylamine, or 0.01 M ATP decreases the half-lives to less than or equal to 0.4 h at all pH values.

Alkanesulfonates↗

Aspartokinase-homoserine dehydrogenase I from Escherichia coli: pH and chemical modification studies of the kinase activity.

The pH variation of the kinetic parameters was examined for the kinase activity of the bifunctional enzyme aspartokinase--homoserine dehydrogenase I isolated from Escherichia coli. The V/K profile for L-aspartic acid indicates the loss of activity upon protonation of a cationic acid type group with a pK value near neutrality. Incubation of the enzyme with diethyl pyrocarbonate at pH 6.0 results in a loss of enzymic activity. The reversal of this reaction by neutral hydroxylamine, the appearance of a peak at 242 nm for the inactivated enzyme, and the observation of a pK value of 7.0 obtained from variation of the inactivation rate with pH all suggest that enzyme inactivation occurs by modification of histidine residues. The substrate L-aspartic acid protects one residue against inactivation, which implies that this histidine may participate in substrate binding or catalysis. Activity loss was also observed at high pH due to the ionization of a neutral acid group with a pK value of 9.8. The reactions of AK-HSD I with N-acetylimidazole and tetranitromethane have been investigated to obtain information about the functional role of tyrosyl residues in the enzyme. The acylation of tyrosines leads to inactivation of the enzyme, which can then be fully reversed by treatment with hydroxylamine. Incubation of the enzyme with tetranitromethane at pH 9.5 also leads to rapid inactivation, and the substrates of the kinase reaction provide substantial protection against inactivation. However, three tyrosines are protected by substrates, implying a structural role for these amino acids.

Alcohol Oxidoreductases↗

Inactivation of human thrombin by water-soluble carbodiimides. The essential carboxyl has a pKa of 5.6 and is one other than Asp-189.

Human thrombin is inactivated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) or 1-ethyl-3-(4-azonia-4,4-dimethylpentyl)carbodiimide (EAC) by a second order process. A plot of the pseudo-first order rate constant for inactivation by 20 mM EDC at different pH values from 4.2 to 7.7 at 25 degrees C shows that this inactivation is due to the modification of a protonated carboxyl with a pKa of 5.6. The rate of inactivation by EDC at pH 6.0 is reduced, but not eliminated by saturating levels of the competitive inhibitor dansyl-L-arginine N-(3-ethyl-1,5-pentanediyl)amide, suggesting that the essential carboxyl modified is one other than Asp-189 in the substrate specificity pocket of thrombin. Complete inactivation by 14C-EAC correlates with the incorporation of approximately 2.5-3 EACs per thrombin.

Aspartic Acid↗

Inactivation of human arginine-143, lysine-143, and isoleucine-143 Cu,Zn superoxide dismutases by hydrogen peroxide: multiple mechanisms for inactivation.

Site-specific mutants of human Cu,Zn superoxide dismutase (Cu,ZnSOD) have been prepared in which the active-site arginine at position 143 (i.e., SODR143) has been replaced by either lysine (SODK143) or isoleucine (SODI143). As reported previously (W.F. Beyer, Jr., et al. (1987) J. Biol. Chem. 262, 11182-11187), SODK143 and SODI143 have 43 and 11%, respectively, of the catalytic activity of SODR143. H2O2, at low concentrations, acts as an affinity reagent for the inactivation of SODR143. At pH 9.0 and 25 degrees C, the process is characterized by a half-saturation constant for H2O2, K50, of 5.1 mM and a maximum pseudo-first-order rate constant for inactivation, Kmax, of 0.53 min-1. At pH 11.5, the corresponding values are 0.63 mM and 1.23 min-1. The active species in the inactivation is likely HO2-, as previously found with yeast and bovine Cu,ZnSODs (see C.L. Borders, Jr., and I. Fridovich (1985) Arch. Biochem. Biophys. 241, 472-476). SODK143 is also inactivated by HO2- by an affinity mechanism, i.e., one where reversible binding of H2O2 (HO2-) is a prerequisite for inactivation. At pH values of 9.0 and 11.5, the kmax values are 0.92 and 1.08 min-1, respectively; however, the corresponding K50 values increase to 42.5 and 15.8 mM, respectively. SODI143 is also inactivated by H2O2, but no evidence for an affinity mechanism was found; instead, a second-order kinetic mechanism was observed. Inactivation of each of the three enzymes is accompanied by the loss of one histidine per subunit. At elevated concentrations of H2O2, a second nonaffinity mechanism of inactivation of both SODR143 and SODK143 was found, in which a second equivalent of H2O2 reacts with the Cu,ZnSOD.HO2- complex to give a competing second-order inactivation. It appears that the positive charge of arginine-143 plays a role in the binding of HO2- at the active site of human Cu,ZnSOD, and that replacement of the arginine by lysine gives an enzyme with a similar affinity mechanism of inactivation, but with a greatly reduced affinity for HO2-. However, replacement with isoleucine causes an entirely different mechanism of inactivation; this raises the possibility that the mechanism of enzyme catalysis of superoxide dismutation by SODI143 is also different.

Arginine↗

Chemical modification of iron- and manganese-containing superoxide dismutases from Escherichia coli.

The manganese-containing (MnSOD) and iron-containing (FeSOD) superoxide dismutases from Escherichia coli are extensively (greater than 95%) inactivated by treatment with phenylglyoxal. The relatively high concentrations of phenylglyoxal and high pH required for optimal inactivation suggest that inactivation may be due to modification of an arginine with a "normal" elevated pKa, i.e., one not in an active site cavity where the pKa is likely to be lowered because of lower solvent accessibility and decreased polarity of the local environment. Treatment of either enzyme with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide, 2-hydroxy-5-nitrobenzyl bromide, m-chloroperoxybenzoate, or tetranitromethane causes no inactivation, while 2,4,6-trinitrobenzenesulfonate, N-acetylimidazole, or diethyl pyrocarbonate cause 55-75% inactivation of each enzyme. Failure of hydroxylamine to reverse inactivation by the latter two suggests that in each instance loss of activity is due to lysine modification. The previously reported inactivation of FeSOD by H2O2 was further investigated, and no evidence was found for an affinity mechanism, i.e., a reversible binding of peroxide that precedes inactivation.

Aldehydes↗

Functional carboxyl groups in the red cell anion exchange protein. Modification with an impermeant carbodiimide.

Anion exchange in human red blood cell membranes was inactivated using the impermeant carbodiimide 1-ethyl-3-(4-azonia-4,4-dimethylpentyl)-carbodiimide (EAC). The inactivation time course was biphasic: at 30 mM EAC, approximately 50% of the exchange capacity was inactivated within approximately 15 min; this was followed by a phase in which irreversible exchange inactivation was approximately 100-fold slower. The rate and extent of inactivation was enhanced in the presence of the nucleophile tyrosine ethyl ester (TEE), suggesting that the inactivation is the result of carboxyl group modification. Inactivation (to a maximum of 10% residual exchange activity) was also enhanced by the reversible inhibitor of anion exchange 4,4'-dinitrostilbene-2,2'-disulfonate (DNDS) at concentrations that were 10(3)-10(4) times higher than those necessary for inhibition of anion exchange. The extracellular binding site for stilbenedisulfonates is essentially intact after carbodiimide modification: the irreversible inhibitor of anion exchange 4,4'-diisothiocyanostilbene-2,2'-disulfonate (DIDS) eliminated (most of) the residual exchange activity: DNDS inhibited the residual (DIDS-sensitive) Cl- at concentrations similar to those that inhibit Cl- exchange of unmodified membranes: and Cl- efflux is activated by extracellular Cl-, with half-maximal activation at approximately 3 mM Cl-, which is similar to the value for unmodified membranes. But the residual anion exchange function after maximum inactivation is insensitive to changes of extra- and intracellular pH between pH 5 and 7. The titratable group with a pKa of approximately 5.4, which must be deprotonated for normal function of the native anion exchanger, thus appears to be lost after EAC modification.

4,4'-Diisothiocyanostilbene-2,2'-Disulfonic Acid↗

Inactivation of bovine thrombin by water-soluble carbodiimides: the essential carboxyl group has a pKa of 5.51.

Bovine thrombin is rapidly and completely (greater than 99%) inactivated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) in a pseudo-first-order process. A plot of the pseudo-first-order rate constant for inactivation by 20 mM EDC at different pH values from pH 4.0 to 7.7 at 25 degrees C shows that inactivation is critically dependent on the protonated form of an acidic side chain with a pKa of 5.51. Significant protection against inactivation is provided by the competitive inhibitor dansyl-L-arginine N-(3-ethyl-1,5-pentanediyl)amide, suggesting that the essential carboxyl group may be involved in substrate binding. 1-Ethyl-3-(4-azonia-4,4-dimethylpentyl)carbodiimide (EAC) inactivates thrombin much more rapidly than EDC under the same conditions.

Animals↗

Arginine residues are critical for the heparin-cofactor activity of antithrombin III.

A dilution/quench technique was used to monitor the time course of chemical modification on the heparin-cofactor (a) and progressive thrombin-inhibitory (b) activities of human antithrombin III. Treatment of antithrombin III (AT III) with 2,4,6-trinitrobenzenesulphonate at pH 8.3 and 25 degrees C leads to the loss of (a) at 60-fold more rapid rate than the loss of (b). This is consistent with previous reports [Rosenberg & Damus (1973) J. Biol. Chem. 248, 6490-6505; Pecon & Blackburn (1984) J. Biol. Chem. 259, 935-938] that lysine residues are involved in the binding of heparin to AT III, but not in thrombin binding. Treatment of AT III with phenylglyoxal at pH 8.3 and 25 degrees C again leads to a more rapid loss of (a) than of (b), with the loss of the former proceeding at a 4-fold faster rate. The presence of heparin during modification with phenylglyoxal significantly decreases the rate of loss of (a). Full loss of (a) correlates with the modification of seven arginine residues per inhibitor molecule, whereas loss of (b) does not commence until approximately four arginine residues are modified and is complete upon the modification of approximately eleven arginine residues per inhibitor molecule. This suggests that (the) arginine residue(s) in AT III are involved in the binding of heparin in addition to the known role of Arg-393 at the thrombin-recognition site [Rosenberg & Damus (1973) J. Biol. Chem. 248, 6490-6505; Jörnvall, Fish & Björk (1979) FEBS Lett. 106, 358-362].

Antithrombin III↗

Essentiality of the active-site arginine residue for the normal catalytic activity of Cu,Zn superoxide dismutase.

Chemical modification of bovine and yeast Cu,Zn superoxide dismutases with phenylglyoxal diminishes the catalytic activities by greater than or equal to 98%, and treatment of these enzymes with butanedione plus borate leads to greater than or equal to 96% inactivation. The activity loss is accompanied by the modification of less than two arginine residues per subunit with no concomitant loss of Cu or Zn. The phenylglyoxal-modified enzymes require at least a 20-fold greater concentration of cyanide for 50% inhibition than do the corresponding native enzymes. Polyacrylamide-gel electrophoresis and activity staining of the phenylglyoxal-inactivated enzymes demonstrate that the residual activity is largely associated with modified forms that bear lower net positive charge than the native superoxide dismutases.

Arginine↗

A comparison of the effects of cyanide, hydrogen peroxide, and phenylglyoxal on eucaryotic and procaryotic Cu,Zn superoxide dismutases.

The Cu,Zn superoxide dismutases from bovine liver, yeast, Caulobacter crescentus, and Photobacter leiognathi were compared for their susceptibilities to inhibition by cyanide and to inactivation by hydrogen peroxide and phenylglyoxal. All of these enzymes were affected by these reagents, albeit with some differences in sensitivity. The yeast and the bacterial enzymes were thus more sensitive to cyanide than was the bovine enzyme, while the bovine and the yeast enzymes were inactivated more rapidly by hydrogen peroxide and less rapidly by phenylglyoxal than were their bacterial counterparts. The qualitative similarities in the behavior of all of these enzymes suggest overriding similarities in their active site regions. However, a quantitative comparison of the data suggests that the bacterial enzymes are more like each other than they are like the eucaryotic enzymes, and furthermore, are more like the yeast enzyme than the bovine enzyme.

Aldehydes↗