Search PubMed⌕ Search

Biomedical subjects

C H Watson

Publications and source records attributed to C H Watson.

14 recordsLinked to original sources
PubMed2006

Cadmium, lead, and thallium in smoke particulate from counterfeit cigarettes compared to authentic US brands.

Smoking remains the leading cause of preventable disease in the United States. Exposure to tobacco smoke leads to cancer, heart and lung disease, and addiction. The origin of the tobacco and cigarette manufacturing practices of counterfeit cigarettes are unknown. Because toxic metals are incorporated into the tobacco lamina during cultivation, the ambient metal content of the soil could produce significant differences in metal levels in both the tobacco and smoke of counterfeit cigarettes. We compared mainstream smoke cadmium, thallium, and lead deliveries from counterfeit and authentic brands. Mainstream smoke levels of all three metals were far greater for counterfeit than the authentic brands, in some cases by an order of magnitude. Significant differences still existed even after normalizing mainstream smoke metal levels with nicotine delivery; the counterfeits typically delivered much higher levels of all three analytes. Our findings, based on 21 different counterfeit samples, suggest that counterfeit cigarettes potentially result in a markedly greater exposure to toxic heavy metals than authentic brands, even after correcting for differences in nicotine intake. In view of the unknown health risks associated with inhaling higher levels of toxic metals, it is prudent to minimize exposure to toxic substances whenever possible.

Cadmium↗
PubMed2005

Cadmium, lead, and thallium in mainstream tobacco smoke particulate.

The deliveries of cadmium, thallium, and lead in mainstream smoke particulate from cigarettes with different smoke delivery designs were determined by inductively coupled plasma-mass spectrometry in order to investigate their impact on the delivery of these known toxic compounds. Analyses showed that the levels of all three metals in smoke particulate were associated with their tar delivery category. After normalizing the metal concentrations to tar, there were no longer any statistically significant delivery differences between full-flavor, light or ultra-light cigarettes. When the concentrations were normalized to nicotine, the mean levels from the three delivery groups were much smaller than before normalization. But unlike the case using tar to normalize, in some of the cases, there were still some statistically significant differences in the nicotine-normalized results. These findings suggest that if smokers compensate for differences in nicotine intake, they receive exposures to toxic heavy metals from ultra-light, light and full-flavor cigarettes that are more similar than results would suggest from using the Federal Trade Commission method alone.

Cadmium↗
PubMed2005

The development of a quantitative flexibility test for body armour and comparison with wearer trials.

In this paper a mechanical flexibility test is developed which can be used to assess multi layer body armour systems. This is compared with a subjective manual test, and then with the results of wearer trials conducted using the recently approved ISO body armour standard ISO 14876-1 (2002). A series of trials was conducted on six different ballistic and/or stab resistant body armour types with a variety of protection levels and constructions. These were tested using the mechanical test system in which the armour was forced through a 200 mm hole by a 100 mm hemispherical plunger. The results of this test were then compared to a second set of trials in which flexibility of the same armour was assessed by manual handling and flexing of the armour. Finally an ergonomic wearer trial was conducted with four armours according to ISO 14876-1 (2002) each armour being assessed by four volunteers and the results compared to flexibility data collected in the first two trials. It was shown that the mechanical flexibility test produced results which were in good agreement with a purely subjective flexibility assessment. These results in turn showed reasonable but not exact correlation with the wearer trials. The ISO wearer trials addressed other factors such as overall comfort and fit of the systems and so the results were not purely a function of flexibility.

Ergonomics↗
PubMed2004

Determination of tar, nicotine, and carbon monoxide yields in the mainstream smoke of selected international cigarettes.

OBJECTIVE: Survey of nicotine, tar, and carbon monoxide (CO) smoke deliveries from 77 cigarette brands purchased in 35 countries was conducted using a standardised machine smoking method. The goal of this study was to determine regional variations and differences in the tar, nicotine, and CO smoke yields of a cigarette brand manufactured by a leading transnational corporation and of non-US locally popular cigarette brands. DESIGN: The majority of the cigarettes were purchased in each of the participating countries by delegate members of the World Health Organization and forwarded to the Centers for Disease Control and Prevention for analysis. Smoke deliveries were determined using a standardised smoking machine method and subsequent gravimetric and gas chromatography analysis. RESULTS: The smoke deliveries varied widely. Mainstream smoke deliveries varied from 6.8 to 21.6 mg tar/cigarette, 0.5 to 1.6 mg nicotine/cigarette, and 5.9 to 17.4 mg CO/cigarette. In addition to the smoke deliveries, the cigarettes were examined to determine physical parameters such as filter composition, length, and ventilation levels. CONCLUSION: Analysis of the smoke deliveries suggested that cigarettes from the Eastern Mediterranean, Southeast Asia, and Western Pacific WHO regions tended to have higher tar, nicotine, and CO smoke deliveries than did brands from the European, American, or African WHO regions surveyed.

Air Pollutants↗
PubMed2003

Wounding patterns and human performance in knife attacks: optimising the protection provided by knife-resistant body armour.

BACKGROUND: Stab attacks generate high loads, and to defeat them, armour needs to be of a certain thickness and stiffness. Slash attacks produce much lower loads and armour designed to defeat them can be far lighter and more flexible. METHODS AND SUBJECTS: Phase 1: Human performance in slash attacks: 87 randomly selected students at the Royal Military College of Science were asked to make one slash attack with an instrumented blade on a vertically mounted target. No instructions on how to slash the target were given. The direction, contact forces and velocity of each attack were recorded. Phase 2: Clinical experience with edged weapon attacks: The location and severity of all penetrating injuries in patients attending the Glasgow Royal Infirmary between 1993 and 1996 were charted on anatomical figures. RESULTS: Phase 1: Two types of human slash behaviour were evident: a 'chop and drag' blow and a 'sweep motion' type of attack. 'Chop and drag' attacks had higher peak forces and velocities than sweep attacks. Shoulder to waist blows (diagonal) accounted for 82% of attacks, 71% of attackers used a long diagonal slash with an average cut length of 34 cm and 11% used short diagonal attacks with an average cut length of 25 cm. Only 18% of attackers slashed across the body (short horizontal); the average measured cut length of this type was 28 cm. The maximum peak force for the total sample population was 212 N; the maximum velocity was 14.88 m s(-1). The 95 percentile force for the total sample population was 181 N and the velocity was 9.89 m s(-1). Phase 2: 431 of the 500 patients had been wounded with edged weapons. The average number of wounds sustained by victims in knife assaults was 2.4. The distribution of wounds by frequency and severity are presented. CONCLUSIONS: Anti-slash protection is required for the arms, neck, shoulders, and thighs. The clinical experience of knife-attack victims provides information on the relative vulnerabilities of different regions of the body. It is anticipated that designing a tunic-type of Police uniform that is inherently stab and slash resistant will eventually replace the current obvious and often bulky extra protective vest. Attempts at making a combined garment will need to be guided by ergonomic considerations and field testing. A similar anatomical regional risk model might also be appropriate in the design of anti-ballistic armour and combined anti-ballistic and knife-resistant armour.

Journal Article↗
PubMed2003

Concentrations of nine alkenylbenzenes, coumarin, piperonal and pulegone in Indian bidi cigarette tobacco.

Indian-made bidi cigarettes sold in the United States are available in a variety of exotic (e.g. clove, mango) and candy-like (e.g. chocolate, raspberry) flavors. Because certain tobacco flavorings contain alkenylbenzenes and other toxic or carcinogenic chemicals, we measured the concentration of flavor-related compounds in bidi tobacco using a previously developed method. Twenty-three brands of bidis were sampled using automated headspace solid-phase microextraction and subsequently analyzed for 12 compounds by gas chromatography-mass spectrometry. Two alkenylbenzene compounds, trans-anethole and eugenol, were found in greater than 90% of the brands analyzed. Methyleugenol, pulegone and estragole were each detected in 30% or more of the brands, whereas safrole and elemicin were not detected in any of the brands. The flavor-related compounds with the highest tobacco concentrations were eugenol (12,000 microg/g tobacco) and trans-anethole (2200 microg/g tobacco). The highest eugenol and trans-anethole concentrations found in bidi tobacco were about 70,000 and 7500 times greater, respectively, than the highest levels previously found in US cigarette brands. Measurement of these compounds is crucial to evaluation of potential risks associated with inhaling highly concentrated flavor-related compounds from bidis or other tobacco products.

Allylbenzene Derivatives↗
PubMed2001

Reliability of individual differences in initial sensitivity and acute tolerance to nitrous oxide hypothermia.

On average, the hypothermia exhibited by rats receiving 60% nitrous oxide (N2O) eventually abates despite the continued inhalation of the drug (i.e., acute tolerance develops). However, large individual differences occur in both the magnitude of hypothermia achieved and the degree of acute tolerance that develops. To determine whether the degree of temperature loss and subsequent recovery during N2O administration are reliable characteristics of an individual, we measured intraperitoneal temperature via telemetry in 77 Long-Evans rats that each received 60% N2O for 5 h during two sessions separated by 14 days. Good intersession reliability (Pearson's r) was observed for simple change and adjusted change scores for both initial N2O temperature sensitivity (.61 < or = r < or = .62), and acute tolerance development (.46 < or = r < or = .52). In a separate experiment, three groups of rats were selected based on their individual body temperature patterns during an initial N2O administration: (1) insensitive to N2O hypothermia (n = 8); (2) marked hypothermia followed by acute tolerance development (n = 6); and (3) marked hypothermia followed by little acute tolerance development (n = 6). When retested 10 days later, each group exhibited a body temperature profile similar to that observed during the initial N2O exposure. Thus, the temperature profile observed during a rat's initial exposure to 60% N2O reflects a reproducible response for that animal.

Anesthetics, Inhalation↗
PubMed2000

Quantitative analysis of acetates in cigarette tobacco using solid-phase microextraction and gas chromatography-mass spectrometry.

A method incorporating solid-phase microextraction (SPME) and gas chromatography-mass spectrometry for the headspace analysis of selected volatile organic compounds present in cigarette tobacco is developed and evaluated. Quantitative information on methyl, ethyl, n-propyl, isopropyl, isopropenyl, vinyl, and butyl acetates present in 29 different flavor variants (full, light, and ultra-light) of the top ten selling brands in the United States is presented. The concentrations of the various acetate analytes range from the low nanaogram to microgram levels per cigarette. Clear differences are observed in the concentrations of various acetates when comparing the levels in brands from different manufacturers. The SPME technique provides a method that allows high sample throughput, requires little sample preparation, and yields useful analytical information. High precision is obtained on multiple measurements of cigarettes from an individual pack, but lower precision levels are observed in general when comparing results obtained on the analysis of cigarettes from different packs of the same brand. The higher pack-to-pack variations may be due in part to product aging with a proportionate amount of evaporative loss of the relatively volatile acetates.

Acetates↗
PubMed2000

Amiloride-sensitive signals and NaCl preference and appetite: a lick-rate analysis.

Rats prefer hypotonic and isotonic NaCl solutions to water in long-access drinking paradigms. To focus on the role of taste signals in NaCl preference, licking patterns of rats with 30-s exposure to NaCl solutions (0-0.5 M) were examined when they were either water deprived, sodium depleted, or not deprived (NaCl mixed in dilute sucrose). In all three conditions, rats displayed a preference for NaCl. The addition of 100 microM amiloride, a sodium channel blocker, to NaCl did not change rats' licking when they were sodium replete but dramatically reduced licking when they were deplete. Transection of the chorda tympani (CT) nerve, an afferent pathway for amiloride-sensitive Na(+) signals, had no effect on NaCl preference in nondeprived rats and only a modest effect on those that were Na(+) deplete. Amiloride was found to exert significant suppression of NaCl intake in Na(+)-depleted rats with transection of the CT, supporting the existence of other afferent pathways for transmission of amiloride-sensitive Na(+) signalling. Together, these studies argue for the involvement of different neural signalling mechanisms in NaCl preference in the presence and absence of explicit Na(+) need.

Amiloride↗
PubMed1999

An assessment of human performance in stabbing.

Stab-resistant body armour is now becoming a standard item of equipment for police officers in the United Kingdom. In the UK these are usually required to have a stab resistance as specified by the Police Scientific Development Branch KR42 standard [G. Parker, PSDB Stab Resistant Body Armour Test Procedure, Police Scientific Development Branch, Publication No 10/93, 1993]. There are several other test standards, all of which specify that body armour must resist penetration by a specific blade type delivered at a specific energy level or range of levels. However, the actual range of energy levels specified varies over almost an order of magnitude and the basis for these levels is not clearly defined. This paper describes tests to determine the energy range and characteristics of stabbing actions that might be directed against stab resistant body armour by an assailant. The energy and velocity that can be achieved in stabbing actions has been determined for a number of sample populations. Volunteers were asked to stab a target using an instrumented knife that measured the axial force and acceleration during the stabbing. The maximum energy obtained in underarm stabbing actions was 64 J whilst overarm stabbing actions could produce 115 J. The loads produced on contact with the target often approached 1000 N.

Acceleration↗
PubMed1997

Assessing enzyme substrate specificity using combinatorial libraries and electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry.

A model experiment for the 'on-line' screening of substrate libraries by enzymes using combinatorial libraries in combination with electrospray ionization-Fourier transform ion cyclotron resonance (ESI-FTICR) mass spectrometry has been performed. The reaction between the electrophilic substrate 1-chloro-2,4-dinitrobenzene and component of a H-gamma-Glu-Cys-Xxx-OH library, catalyzed by glutathione-S-transferase, has been monitored. It shows the feasibility of 'two-dimensional' screening of substrate libraries by ESI-FTICR mass spectrometry.

Cyclotrons↗
PubMed1996

Analysis of combinatorial libraries using electrospray Fourier transform ion cyclotron resonance mass spectrometry.

Electrospray ionization coupled with Fourier transform ion cyclotron resonance (FTICR) mass spectrometry has been used to provide information about complete combinatorial libraries of small peptides containing 10(3)-10(4) components. The fidelity of attempted synthesis steps can be ascertained rapidly, and, when the extremely high resolution FTICR mass spectra are combined with appropriate computer simulation, both diversity and degeneracy of the libraries as synthesized can be assessed.

Computer Simulation↗
PubMed1967

Coconut and Salmonella infection.

Raw, unprocessed coconut supports the growth of salmonellae as well as that of other enteric bacteria, salmonellae being particularly resistant to subsequent desiccation. Original contamination is not due to carriers or to polluted water supplies, but to contact with bacteria-containing soils followed by dispersion via infected coconut milk and shells. Pasteurization of raw coconut meat in a water bath at 80 C for 8 to 10 min effectively killed such bacteria, did not injure the product, and provided a prophylactic method now widely used by the coconut industry.

Cocos↗