Search PubMed⌕ Search

Biomedical subjects

C H Turner

Publications and source records attributed to C H Turner.

At least 145 records · Page 8Linked to original sources
PubMed1991

Homeostatic control of bone structure: an application of feedback theory.

The regulation of bone mass and structure in the weight-bearing skeleton is governed to a great extent by the mechanical demands placed upon the bone tissue. The apparent biological goal is the maintenance of a minimum adequate structure, in which the margin of safety between normal mechanical demands and fracture is balanced by the cost of excessive bone mass on mobility. Frost has developed two powerful postulates concerning bone adaptation: (a) there exist threshold levels of mechanical strain, above or below which bone adaptation is turned on, and (b) the set point for normal bone structure can be modulated by hormones. A model was developed, using Frost's postulates and simple feedback theory, that describes the interaction between biochemical influences and mechanical influences on bone structure. The model predicts that biochemical agents that influence bone structure independently of the mechanical feedback system (e.g., calcitonin) are capable of only limited anabolic effects on bone mass because their influences conflict with mechanical influences. However, biochemical agents that influence bone structure by changing the set point of the mechanical feedback system (e.g., estrogen) will provide lasting changes in bone structure. Age-related changes occur within the effector and transduction components of the mechanical feedback system that tend to make it sluggish. These changes may lead to increased bone fragility because the system is no longer capable of maintaining adequate bone structure.

Adaptation, Physiological↗
PubMed1990

1H-n.m.r. studies of the isolated activation segment from pig procarboxypeptidase A.

The isolated activation segment (asA) from pig pancreatic procarboxypeptidase A was studied by 1H-n.m.r. spectroscopy over a wide range of solution conditions. Isolated asA shows many characteristics of compactly folded globular proteins, such as the observation of perturbed positions for resonances from methyl groups, alpha-carbon atoms, histidine residues and the tyrosine residue. The single tyrosine residue (Tyr-70) exhibits a very high pKa, and both histidine and tyrosine residues show slow chemical modification (deuteration and iodination). In contrast, asA shows rapid NH exchange. Analysis of the spectra by pH titration and nuclear Overhauser effects revealed several residue interactions. Quantitative analysis of deuterium and tritium exchange allowed the assignment of the histidine C-2-H resonances to their respective residues in the sequence. His-66, the closest to the sites of proteolytic attack in the proenzyme, is shown to be the most accessible to solvent in procarboxypeptidase A. It was also shown that asA is thermally very stable ['melting' temperature (Tm) 88 degrees C] and requires a high urea concentration for denaturation (6.25 M, at pH 7.5). Evidence is presented for some degree of conformational flexibility in the premelting range, a feature that could be ascribed to the preponderance of helical secondary structure and to the lack of disulphide bridges. The free solution structure of asA is probably unchanged when it binds to carboxypeptidase A.

Animals↗
PubMed1990

Potential of a soluble tetrazolium/formazan assay for the evaluation of filarial viability.

Using female Acanthocheilonema viteae we have investigated the bioreduction of the tetrazolium reagent XTT (2,3-bis(2-methoxy-4-nitro-sulphonyl)-5-[(phenylamino) carbonyl]-2H-tetrazolium hydroxide). Unlike the formazan formed by other tetrazolium salts, that derived from XTT readily diffuses out of A. viteae in vitro. Formazan formation can therefore be quantified by direct absorbance reading of the incubation medium, eliminating the need for a DMSO solubilization step. Optimum assay conditions involved a 4 h incubation, in the presence of the electron coupling agent phenazine methosulphate (PMS). Repeat 4 h incubations with XTT-PMS were well tolerated by worms for 5 consecutive days. This confirmed the low toxicity of XTT formazan and its usefulness in the semi-continuous assessment of filarial viability. In comparison to our previously reported MTT (3-(4, 5 dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide)-reduction assay XTT-PMS reduction showed comparable drug sensitivity and accuracy, however XTT-PMS appears to be at least 10-15 times less efficiently reduced by A. viteae females. A possible application of the XTT assay using female Onchocerca volvulus is discussed.

Animals↗
PubMed1990

The fabric dependence of the orthotropic elastic constants of cancellous bone.

It has been proposed that the orthotropic elastic constants of cancellous bone depend upon a tensorial measure of anisotropy called fabric as well as the tissue's structural density. Cowin (1985, Mechanics Mater, 4, 137-147; 1986, J. biomech. Engng 108, 83-88) developed explicit relationships for the elastic constant, structural density and fabric relationship. In this study the orthotropic elastic moduli, structural density, and fabric components were measured for 11 cancellous bone specimens from five bovine femora and for 75 specimens from three human proximal tibiae and fitted to these relationships using a least squares analysis. The relationships explained between 72 and 94% of the variance in the elastic constants. The relationships between the elastic constants and squared or cubed power functions of structural density had better predictive value over the entire distribution of the data than did expressions with linear functions of structural density.

Aged↗
PubMed1989

Colorimetric quantitation of filarial viability.

A simple three-step colorimetric assay based on the tetrazolium salt MTT (3-(4,5 dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) has been developed for quantifying filarial viability. Living (but not dead) filariae take up MTT and rapidly reduce it to formazan, so staining themselves dark blue. This colour change which is easily seen provides a rapid qualitative test for filarial viability. Quantitative data can be obtained by solubilizing formazan out of the worm with DMSO and measuring the absorbance of the resulting solution at 510 nm. To date the technique has been demonstrated in several species of filariae including Onchocerca volvulus. MTT reduction is thought to be selective for NADH-dependent dehydrogenase activity in viable worms. The reaction occurs readily in all developmental stages of Dipetalonema viteae including fragments of filarial tissue. Enzyme activity in viable intact D. viteae appears to be primarily associated with the hypodermis/muscle cells, with minimal formazan formation in the gut and reproductive tracts. The application of this MTT assay as a parameter for quantifying in vitro drugs effects is described. Assay procedures have been developed and optimized with D. viteae and Brugia pahangi for the assessment of effects of macrofilariae and microfilarial release, and the activity of a range of antifilarial standards reported. Several potential applications of the technique to studies on filarial biology are discussed.

Animals↗
PubMed1989

Anatomical variation of orthotropic elastic moduli of the proximal human tibia.

The anatomical variation of orthotropic elastic moduli of the cancellous bone from three human proximal tibiae was investigated using an ultrasonic technique. With this technique, it was possible to measure three orthogonal elastic moduli and three shear moduli from cubic specimens of cancellous bone as small as 8 mm per side. Correlation with mechanical tensile testing has shown this technique to offer a precise measure of cancellous modulus (Eten = 0.94Eult + 144.6 MPa, r2 = 0.96, n = 34). The cancellous bone of the proximal tibia was found to be very inhomogeneous, with the axial modulus ranging between 340 and 3350 MPa. A course map is presented, showing measured Young's moduli as a function of anatomical position. The anisotropy of the cancellous bone, determined by the relative differences between the three orthogonal moduli, was shown to be relatively constant over the entire range of cancellous densities tested. The relationship between the axial elastic modulus and the apparent density was found to be approximately linear, as reported by others for proximal tibial cancellous bone.

Aged↗
PubMed1989

A "minimal epitope" anti-protein antibody that recognises a single modified amino acid.

Antibodies that recognise proteins bind to epitopes of varying size, but a grouping of the order of six amino acids, contiguous or not, is regarded as a typical number. By using as immunogen a highly abundant and universal eukaryotic nuclear protein (histone H4) modified in a manner not typical of secreted proteins (acetylation of lysine side chains), antiserum has been raised in rabbits having the single amino acid epsilon-N-acetyl lysine as the recognition epitope. The affinity-purified antibody should be useful for studying the functional role of this modification. The methodology has potential for raising antibodies to other types of post-translationally modified proteins.

Animals↗
PubMed1989

Yield behavior of bovine cancellous bone.

The compressive yield strain was measured for 61 specimens of bovine cancellous bone from three distal femora. There was no significant relationship (p = 0.08, R2 = 0.051) between yield strain and the degree of trabecular orientation. There was a significant positive correlation (p less than 0.00001, R2 = 0.319) between yield strain and structural (apparent) density and significant negative correlation (p less than 0.0025, R2 = 0.145) between yield strain and bone density. Yield strain correlated best with bone solid volume fraction Vv (epsilon y = 0.592 +2- 1.446vv, R2 = 0.337). The quantity, yield strain, is highly dependent on specific definitions of the yield point and the point of zero strain. For this study the yield point was defined by a 0.0003 offset criterion, and the point of zero strain was defined as the point where the tangent at 15 percent of yield crosses zero. The results using these definitions were compared with results using yield strain values determined by other definitions of the yield point and zero strain. The correlations between yield strain and trabecular orientation, structural density and bone density changed very little for differing definitions of yield. The results suggest that yield strain in cancellous bone is isotropic or independent of textural anisotropy, so the yield behaviour may be characterized by a maximum strain yield criterion. The results also suggest that the primary mode of yield in cancellous bone is buckling of the trabeculae.

Animals↗
PubMed1989

Perceptions of stress among third-year dental students.

The purpose of this study was to identify the perceived stress of third-year dental students using a large sample (four classes). The dental environmental stress (DES) questionnaire was administered to 263 (87.7 percent) third-year students from 1984 to 1988. The top six stress items, as perceived by third-year students, included examinations and grades, graduation requirements, inconsistency of professor's feedback, patient tardiness or no show, atmosphere created by clinical faculty, and financial responsibilities. In addition, 15 of the 38 DES questionnaire items were considered moderately stressful or very stressful by at least 34.0 percent of the students.

Female↗
PubMed1989

Personality variables as predictors of performance for first-year dental students.

This study attempted to determine if students with certain personality preferences outperform others over the course of the initial dental school year. The Myers-Briggs Type Indicator (MBTI) was used to assess the relationship between personality preferences and academic performance. One hundred and ninety-nine dental students in four successive first-year classes, 1983-86, participated. Pearson correlation coefficients were used to relate academic performance (first-semester, second-semester, and first-year GPAs) to personality preferences (EI, SN, TF, JP) and academic predictors (entering GPA and DAT scores). For personality preferences, all correlation coefficients were low and nonsignificant. In comparison, entering GPA and DAT (academic) scores were significantly correlated with first-semester, second-semester, and first-year GPAs. DAT (perceptual ability) scores showed a significant correlation with first-semester GPAs only.

Educational Measurement↗
PubMed1988

Errors induced by off-axis measurement of the elastic properties of bone.

Misalignment between the axes of measurement and the material symmetry axes of bone causes error in anisotropic elastic property measurements. Measurements of Poisson's ratio were strongly affected by misalignment errors. The mean errors in the measured Young's moduli were 9.5 and 1.3 percent for cancellous and cortical bone, respectively, at a misalignment angle of 10 degrees. Mean errors of 1.1 and 5.0 percent in the measured shear moduli for cancellous and cortical bone, respectively, were found at a misalignment angle of 10 degrees. Although, cancellous bone tissue was assumed to have orthotropic elastic symmetry, the possibility of the greater symmetry of transverse isotropy was investigated. When the nine orthotropic elastic constants were forced to approximate the five transverse isotropic elastic constants, errors of over 60 percent were introduced. Therefore, it was concluded that cancellous bone is truly orthotropic and not transversely isotropic. A similar but less strong result for cortical bone tissue was obtained.

Animals↗
PubMed1987

Elastic properties of cancellous bone: measurement by an ultrasonic technique.

The high degree of porosity of cancellous bone makes elastic property measurement difficult by traditional mechanical testing methods. An ultrasonic technique is described with which mechanical properties of anisotropic, rigid, porous materials, such as cancellous bone, can be measured. The technique utilizes unique piezoelectric transducers operated in a continuous wave mode at a frequency of approximately 50 kHz. Both longitudinal and shear waves can be propagated and received with the transducers allowing both Young's moduli and shear moduli to be determined with the technique. A comparison between moduli measured with the ultrasonic technique and moduli measured with traditional mechanical testing shows the new method to be quite accurate in elastic property determination, (r2 = 0.935, Emech = 1.00E1dt + 23.3 MPa) (r2 = 0.656, Gmech = 1.08 Gult--3.3MPa).

Animals↗
PubMed1985

Primary structure of histone H2B from gonads of the starfish Asterias rubens. Identification of an N-dimethylproline residue at the amino-terminal.

The complete amino acid sequence (121 residues) of histone H2B from gonads of the starfish Asterias rubens has been established from structural data obtained essentially from large fragments generated by cleavage of histone H2B at aspartyl residues and by limited hydrolysis of the dimer H2A-H2B with mouse submaxillary gland protease. No real sequence homology can be found between the amino-terminal sequence (residues 1-21) of starfish and calf H2B. One non-conservative substitution (serine-32 in calf----lysine-28 in starfish) leads to the presence of a cluster of eight basic residues (sequence 23-30) and to the disappearance of a potential site of phosphorylation. A particular structural feature of starfish histone H2B is the presence of N-dimethylproline at its amino-terminal end. By comparison with N-terminal acetylation, which is commonly found in histones, N-terminal methylation is rarely observed. At the present time the functional significance of the N-terminal methylation as well as that of the proline-rich nature of the amino-terminal sequence of the starfish histone H2B remain to be defined.

Acetates↗
PubMed1984

Conformation and domain structure of the non-histone chromosomal proteins HMG 1 and 2. Domain interactions.

The sequence of the 224 residues of HMG 1 suggests it consists of three domains. We have previously proposed [Cary et al. (1980 Eur. J. Biochem. 131, 367-374] that the A and B domains can fold autonomously and that there is also a small N domain. Several proteases are now found to cut at the end of the B domain (at or close to residue 184). It is shown that the A + B-domain fragment also folds and probably contains all the helix of intact HMG 1. The stability of the B domain is enhanced by the presence of the A domain. The acidic C domain undergoes a coil----helix transition on lowering the pH. Several peptides have been prepared by cleavage at tryptophan. Peptide 57--C-terminus contains complete B and C domains but does not fold. In the absence of the A domain the C domain is thus able to destabilise the B domain. It is concluded that the stability of the B domain in HMG 1 is due to interaction with the A domain and the C domain has a separate function from the other domains.

Amino Acids↗