Search PubMed⌕ Search

Biomedical subjects

C H Turner

Publications and source records attributed to C H Turner.

At least 37 records · Page 2Linked to original sources

Mechanotransduction in bone: genetic effects on mechanosensitivity in mice.

Bone formation is enhanced by mechanical loading, but human exercise intervention studies have shown that the response to mechanical loading is variable, with some individuals exhibiting robust osteogenic responses while others respond modestly. Thus, mechanosensitivity - the ability of bone tissue to detect mechanical loads - could be under genetic control. We applied controlled mechanical loading to the ulnae of 20-week-old (adult) female mice derived from three different inbred strains (C3H/He, C57BL/6, and DBA/2), and measured the bone formation response with fluorochrome labels. Mechanical properties, including mechanical strain, second moments of area, and cortical bone material properties, were measured in a group of calibration animals not subjected to in vivo loading. The C3H/He mice were significantly less responsive to mechanical loading than the other two biological strains. Material properties (flexural elastic modulus, ultimate stress) were greatest in the C3H/He cortical tissue. Geometric and areal properties at the midshaft ulna were also greatest in the C3H/He mice. Based on the presumed role of osteocytes in strain detection, we measured osteocyte lacuna population densities in decalcified midshaft ulna sections. Osteocyte lacuna density was not related to mechanosensitivity. Our data suggest that bone mechanosensitivity has a significant genetic component. Identification of the genes that exert their influence on mechanosensitivity could ultimately lead to therapies that enhance bone mass and reduce fracture susceptibility.

Animals↗

Skeletal efficacy with parathyroid hormone in rats was not entirely beneficial with long-term treatment.

We report the consequences of prolonged treatment with recombinant human parathyroid hormone (1-34) (PTH) in male and ovariectomized female rats with mature skeletons. Intact male and osteopenic, ovariectomized, female F-344 rats were evaluated after 1 year of treatment with 0, 8, or 40 microg/kg/day s.c. PTH. Males and females were about 6 months of age at study initiation; females were ovariectomized (Ovx) for 5 weeks before initiation of PTH treatment. PTH did not affect the survival of either intact males or ovariectomized females. Qualitative histopathology showed expected changes associated with aging in kidneys and proximal tibiae, with no treatment-related anomalies after 1 year of PTH administration. PTH slightly increased the femoral length of ovariectomized females but not that of males. No significant differences in femoral length were observed between sham and Ovx controls. Proximal femora of the males and ovariectomized females given the high dose of 40 microg/kg showed 211 and 186% greater trabecular bone area, 118 and 94% greater cortical thickness, 170 and 189% greater trabecular number, and 321 and 404% greater connectivity (node-to-node struts) compared with respective vehicle controls. Increased trabecular and endocortical surface apposition coincided with a 78 and 70% loss of marrow space for males and females treated with PTH, respectively. Biomechanical strength (ultimate load) of the femoral neck increased by 73 and 76%, respectively, in males and ovariectomized females. Cortical bone analyses of the femoral midshaft showed 105 and 72% increases in bone mineral content, 67 and 55% increases in bone mineral density, and 22 and 10% increases in cross-sectional area for males and ovariectomized females, respectively, with altered shape of femora. Biomechanical analyses of the midshaft showed substantial increases in strength and stiffness but a reduction in ultimate strain, which was likely due to the altered geometry of the midshaft for PTH groups. Aging effects on strength of vertebra and femoral midshaft were reversed by PTH treatment. In summary, the 1-year treatment duration, which represents about 50% of lifetime, did not affect survival and was not associated with any treatment-related anomalies in the kidney or skeleton. PTH reversed the aging process in bones but not kidneys and substantially increased bone mass and strength to well beyond normally attained levels. However, compared with short-term studies reported previously, there seemed to be no advantages to extending PTH treatment to 12 months in rat bones.

Absorptiometry, Photon↗

The effect of mechanical loading on the size and shape of bone in pre-, peri-, and postpubertal girls: a study in tennis players.

Exercise during growth results in biologically important increases in bone mineral content (BMC). The aim of this study was to determine whether the effects of loading were site specific and depended on the maturational stage of the region. BMC and humeral dimensions were determined using DXA and magnetic resonance imaging (MRI) of the loaded and nonloaded arms in 47 competitive female tennis players aged 8-17 years. Periosteal (external) cross-sectional area (CSA), cortical area, medullary area, and the polar second moments of area (I(P), mm4) were calculated at the mid and distal sites in the loaded and nonloaded arms. BMC and I(P) of the humerus were 11-14% greater in the loaded arm than in the nonloaded arm in prepubertal players and did not increase further in peri- or postpubertal players despite longer duration of loading (both, p < 0.01). The higher BMC was the result of a 7-11% greater cortical area in the prepubertal players due to greater periosteal than medullary expansion at the midhumerus and a greater periosteal expansion alone at the distal humerus. Loading late in puberty resulted in medullary contraction. Growth and the effects of loading are region and surface specific, with periosteal apposition before puberty accounting for the increase in the bone's resistance to torsion and endocortical contraction contributing late in puberty conferring little increase in resistance to torsion. Increasing the bone's resistance to torsion is achieved by modifying bone shape and mass, not necessarily bone density.

Adolescent↗

Is skeletal mechanotransduction under genetic control?

Studies of twins have established that peak bone mass is about 70% heritable. The skeletal response to exercise contributes to peak bone mass, as mechanical loading increases skeletal mass during growth and development. It is possible that the skeletal responsiveness to mechanical loading is under genetic control, so that some individuals will build stronger bones with exercise. This appears to be the case in mice. Long bones in mice of the C3H/He strain are largely unresponsive to mechanical loading. Ironically, this strain of mice has very high bone density. Perhaps the genes that regulate BMD are not the same as those that regulate mechanical loading response. Studies of recombinant inbred and congenic strains derived from C3H mice will help to identify genes influencing bone size, density and responsiveness to mechanical loading.

Journal Article↗

Combined effects of diets with reduced calcium and phosphate and increased fluoride intake on vertebral bone strength and histology in rats.

Ingested fluoride is incorporated into bone apatite and can affect the structural integrity of bone. Fluoride absorption in the gut and incorporation into bone is affected by the presence of other ions, including calcium. We hypothesized that a low calcium phosphate diet combined with high fluoride intake would have independent detrimental effects on vertebral bone strength. We measured the vertebral biomechanical properties and bone histology for rats given controlled diets with varied fluoride and calcium phosphate intakes for either 16 or 48 weeks. Diets were designed to produce mild calcium deficiency while keeping Ca:P ratio constant. Hence calcium deficiency was accompanied by a proportional phosphate deficiency. Calcium phosphate deficiency (25% of normal) significantly diminished vertebral strength only in younger rats. As the rats grew older, the effects of calcium phosphate deficiency were mitigated. Calcium phosphate deficiency reduced vertebral strength in young rats primarily by reducing the trabecular bone volume. The highest fluoride intake (50 mg/L) significantly diminished vertebral strength, but there was no effect of lower fluoride intakes on bone strength. In contrast to calcium phosphate deficiency, high fluoride intake had no effect on trabecular bone volume but instead increased the amount of unmineralized osteoid, particularly in older rats. This impairment of mineralization by fluoride appeared to be the primary cause of the diminished vertebral strength. The detrimental effects of fluoride on vertebral bone strength were not amplified by calcium phosphate deficiency.

Animals↗

Shear strength and fatigue properties of human cortical bone determined from pure shear tests.

Shear properties of bone have been inferred from torsion tests. However, torsion often causes spiral fracture planes that correspond to tensile rather than shear failure. We measured the shear properties of human cortical bone in both longitudinal and transverse directions using pure shear tests. Shearing applied transverse to the bone long axis caused fracture along a 45 degrees plane that coincided with maximum tension. This fracture pattern is similar to spiral fractures caused by torsion. Shear strength along the bone axis was 51.6 MPa or about 35% less than that determined using torsion tests. Fatigue tests of human cortical bone in pure shear were conducted. The results agreed well with previous measurements of cortical bone fatigue life in tension and compression, when normalized to strength. Using tibial shear strain magnitudes measured previously for human volunteers, we estimated the fatigue life of cortical bone for different activities, and speculate that shear fatigue failure is a probable cause of tibial stress fractures resulting from impact loading.

Aged↗

Effects of suppressed bone turnover by bisphosphonates on microdamage accumulation and biomechanical properties in clinically relevant skeletal sites in beagles.

We recently demonstrated that suppression of bone remodeling allows microdamage to accumulate, leading to reduced bone toughness in the rib cortex of dogs. This study evaluates the effects of reduced bone turnover produced by bisphosphonates on microdamage accumulation and biomechanical properties at clinically relevant skeletal sites in the same dogs. Thirty-six female beagles, 1-2 years old, were divided into three groups. The control group was treated daily for 12 months with saline vehicle (CNT). The remaining two groups were treated daily with risedronate at a dose of 0.5 mg/kg per day (RIS), or alendronate at 1.0 mg/kg per day (ALN) orally. The doses of these bisphosphonates were six times the clinical doses approved for treatment of osteoporosis in humans. After killing, the L-1 vertebra was scanned by dual-energy X-ray absorptiometry (DXA), and the L-2 vertebra and right ilium were assigned to histomorphometry. The L-3 vertebra, left ilium, Th-2 spinous process, and right femoral neck were used for microdamage analysis. The L-4 vertebra and Th-1 spinous process were mechanically tested to failure in compression and shear, respectively. One year treatment with risedronate or alendronate significantly suppressed trabecular remodeling in vertebrae (RIS 90%, ALN 95%) and ilium (RIS 76%, ALN 90%) without impairment of mineralization, and significantly increased microdamage accumulation in all skeletal sites measured. Trabecular bone volume and vertebral strength increased significantly following 12 month treatment. However, normalized toughness of the L-4 vertebra was reduced by 21% in both RIS (p = 0.06) and ALN (p = 0.05) groups. When the two bisphosphonate groups were pooled in a post hoc fashion for analysis, this reduction in toughness reached statistical significance (p = 0.02). This study demonstrates that suppression of trabecular bone turnover by high doses of bisphosphonates is associated with increased vertebral strength, even though there is significant microdamage accumulation and a reduction in the intrinsic energy absorption capacity of trabecular bone.

Animals↗

Effects of human parathyroid hormone (1-34), LY333334, on bone mass, remodeling, and mechanical properties of cortical bone during the first remodeling cycle in rabbits.

We have previously shown that parathyroid hormone (PTH) increases cortical bone mass and mechanical strength of female rabbits after 140 days of treatment. However, cortical porosity was also shown to increase. If cortical porosity increases prior to the change in geometry, there may be a transient decrease in cortical bone strength that could make the bone more susceptible to fracture in the early phase of treatment. The purpose of this study is to examine the effects of PTH on the remodeling dynamics and mechanical properties of cortical bone in rabbits, which exhibit haversian remodeling, during the first remodeling cycle after the initiation of treatment. Fifty 9-month-old intact female New Zealand white rabbits were randomized into five groups. A baseline control group was killed at the start of the experiment. The two PTH-treated groups were given human PTH(1-34) at 10 microg/kg daily subcutaneously for 35 (P35) or 70 (P70) days. Two respective age-matched control groups (V35, V70) were injected with vehicle. Histomorphometry of the cortical bone in the tibial midshaft showed that, although intracortical activation frequency was significantly increased by PTH at 35 days, there was no significant increase of cortical porosity in the first remodeling cycle (70 days). Moreover, stimulation of cortical surface bone formation in the treated animals led to significantly greater cortical area and greater bone strength in both P35 and P70. We conclude that, although intracortical remodeling increases within the first remodeling period (70 days) in animals treated with 10 microg/kg PTH, the greater cortical area due to acceleration of bone formation on cortical surfaces increases cortical bone strength. There is no mechanical risk during the first remodeling cycle associated with intermittent PTH treatment in animals with normal bone mass.

Alkaline Phosphatase↗

Modulation of appositional and longitudinal bone growth in the rat ulna by applied static and dynamic force.

Appositional and longitudinal growth of long bones are influenced by mechanical stimuli. Using the noninvasive rat ulna loading model, we tested the hypothesis that brief-duration (10 min/day) static loads have an inhibitory effect on appositional bone formation in the middiaphysis of growing rat ulnae. Several reports have shown that ulnar loading, when applied to growing rats, results in suppressed longitudinal growth. We tested a second hypothesis that load-induced longitudinal growth suppression in the growing rat ulna is proportional to time-averaged load, and that growth plate dimensions and chondrocyte populations are reduced in the loaded limbs. Growing male rats were divided into one of three groups receiving daily 10 min bouts of static loading at 17 N, static loading at 8.5 N, or dynamic loading at 17 N. Periosteal bone formation rates, measured 3 mm distal to the ulnar midshaft, were suppressed significantly (by 28-41%) by the brief static loading sessions despite normal (dynamic) limb use between the daily loading bouts. Static loading neither suppressed nor enhanced endocortical bone formation. Dynamic loading increased osteogenesis significantly on both surfaces. At the end of the 2 week loading experiment, loaded ulnae were approximately 4% shorter than the contralateral controls in the 17 N static and dynamic groups, and approximately 2% shorter than the control side in the 8.5 N static group, suggesting that growth suppression was proportional to peak load magnitude, regardless of whether the load was static or dynamic. The suppressed growth in loaded limbs was associated with thicker distal growth plates, particularly in the hypertrophic zone, and a concurrent retention of hypertrophic cell lacunae. Negligible effects were observed in the proximal growth plate. The results demonstrate that, in growing animals, even short periods of static loading can significantly suppress appositional growth; that dynamic loads trigger the adaptive response in bone; and that longitudinal growth suppression resulting from compressive end-loads is proportional to load magnitude and not average load.

Animals↗

Effects of high-dose etidronate treatment on microdamage accumulation and biomechanical properties in beagle bone before occurrence of spontaneous fractures.

We recently demonstrated that suppressed bone remodeling allows microdamage to accumulate and causes reductions in some mechanical properties. However, in our previous study, 1 year treatment with high-dose etidronate (EHDP) did not increase microdamage accumulation in most skeletal sites of dogs in spite of complete remodeling suppression and the occurrence of spontaneous fractures of ribs and/or thoracic spinous processes. This study evaluates the effects of EHDP on microdamage accumulation and biomechanical properties before fractures occur. Thirty-six female beagles, 1-2 years old, were treated daily for 7 months with subcutaneous injections of saline vehicle (CNT) or EHDP at 0.5 (E-low) or 5 mg/kg per day (E-high). After killing, bone mineral measurement, histomorphometry, microdamage analysis, and biomechanical testing were performed. EHDP treatment suppressed intracortical and trabecular remodeling by 60%-75% at the lower dose, and by 100% at the higher dose. Osteoid accumulation caused by a mineralization deficit occurred only in the E-high group, and this led to a reduction of mineralized bone mass. Microdamage accumulation increased significantly by two- to fivefold in the rib, lumbar vertebra, ilium, and thoracic spinous process in E-low, and by twofold in the lumbar vertebra and ilium in E-high. However, no significant increase in damage accumulation was observed in ribs or thoracic spinous processes in E-high where fractures occur following 12 months of treatment. Mechanical properties of lumbar vertebrae and thoracic spinous processes were reduced significantly in both E-low and E-high. These findings suggest that suppression of bone remodeling by EHDP allows microdamage accumulation, but that osteoid accumulation reduces production of microdamage.

Animals↗

Recovery periods restore mechanosensitivity to dynamically loaded bone.

Bone cells are capable of sensing and responding to mechanical forces, but mechanosensitivity begins to decline soon after the stimulus is initiated. Under continued stimulation, bone is desensitized to mechanical stimuli. We sought to determine the amount of time required to restore mechanosensitivity to desensitized bone cells in vivo by manipulating the recovery time (0, 0.5, 1, 2, 4 or 8 h) allowed between four identical daily loading bouts. We also investigated the osteogenic effectiveness of shorter-term recovery periods, lasting several seconds (0.5, 3.5, 7 or 14 s), introduced between each of 36 identical daily loading cycles. Using the rat tibia four-point bending model, the right tibia of 144 adult female Sprague-Dawley rats was subjected to bending, sham bending or no loading. In the rats receiving recovery periods between loading bouts, histomorphometric measurements from the endocortical surface of the loaded and nonloaded control (left) tibiae revealed more than 100 % higher relative bone formation rates in the 8 h recovery group than in the 0 and 0.5 h recovery groups. Approximately 8 h of recovery was sufficient to restore full mechanosensitivity to the cells. In the rats allowed time to recover between load cycles, 14 s of recovery resulted in significantly higher (66-190 %) relative bone formation rates compared to any of the three shorter recovery periods. In both experiments, bone formation in the sham-bending animals was similar to that in the nonloaded control group. The results demonstrate the importance of recovery periods for (i) restoring mechanosensitivity to bone cells and (ii) maximizing the osteogenic effects of mechanical loading (exercise) regimens.

Animals↗

Intermittently administered human parathyroid hormone(1-34) treatment increases intracortical bone turnover and porosity without reducing bone strength in the humerus of ovariectomized cynomolgus monkeys.

Cortical porosity in patients with hyperparathyroidism has raised the concern that intermittent parathyroid hormone (PTH) given to treat osteoporotic patients may weaken cortical bone by increasing its porosity. We hypothesized that treatment of ovariectomized (OVX) cynomolgus monkeys for up to 18 months with recombinant human PTH(1-34) [hPTH(1-34)] LY333334 would significantly increase porosity in the midshaft of the humerus but would not have a significant effect on the strength or stiffness of the humerus. We also hypothesized that withdrawal of PTH for 6 months after a 12-month treatment period would return porosity to control OVX values. OVX female cynomolgus monkeys were given once daily subcutaneous (sc) injections of recombinant hPTH(1-34) LY333334 at 1.0 microg/kg (PTH1), 5.0 microg/kg (PTH5), or 0.1 ml/kg per day of phosphate-buffered saline (OVX). Sham OVX animals (sham) were also given vehicle. After 12 months, PTH treatment was withdrawn from half of the monkeys in each treatment group (PTH1-W and PTH5-W), and they were treated for the remaining 6 months with vehicle. Double calcein labels were given before death at 18 months. After death, static and dynamic histomorphometric measurements were made intracortically and on periosteal and endocortical surfaces of sections from the middiaphysis of the left humerus. Bone mechanical properties were measured in the right humeral middiaphysis. PTH dose dependently increased intracortical porosity. However, the increased porosity did not have a significant detrimental effect on the mechanical properties of the bone. Most porosity was concentrated near the endocortical surface where its mechanical effect is small. In PTH5 monkeys, cortical area (Ct.Ar) and cortical thickness (Ct.Th) increased because of a significantly increased endocortical mineralizing surface. After withdrawal of treatment, porosity in PTH1-W animals declined to sham values, but porosity in PTH5-W animals remained significantly elevated compared with OVX and sham. We conclude that intermittently administered PTH(1-34) increases intracortical porosity in a dose-dependent manner but does not reduce the strength or stiffness of cortical bone.

Animals↗

Sexual dimorphism in vertebral fragility is more the result of gender differences in age-related bone gain than bone loss.

Spine fractures usually occur less commonly in men than in women. To identify the structural basis for this gender difference in vertebral fragility, we studied 1013 healthy subjects (327 men and 686 women) and 76 patients with spine fractures (26 men and 50 women). Bone mineral content (BMC), cross-sectional area (CSA), and volumetric bone mineral density (vBMD) of the third lumbar vertebral body (L3) were measured by posteroanterior (PA) and lateral scanning using dual-energy X-ray absorptiometry (DXA). In this cross-sectional study, the diminution in peak vertebral body BMC from young adulthood to old age was less in men than in women (6% vs. 27%). This diminution was the net result of two opposing changes occurring concurrently throughout adult life: the removal of bone adjacent to marrow on the inner (endosteal) surface by bone resorption and the deposition of bone on the outer (periosteal) surface by bone formation. For L3, we estimated that men resorbed 3.7 g and deposited 3.1 g, producing a net loss of 0.6 g from young adulthood to old age and women resorbed 3.1 g and deposited only 1.2 g, producing a net loss of 1.9 g. Thus, based on our indirect estimates of periosteal gain and endosteal loss across life, the observed net diminution in BMC during aging was less in men than women because absolute periosteal bone formation was greater in men than women (3.1 g vs. 1.2 g) not because absolute bone resorption was less in men. On the contrary, the absolute amount of bone resorbed was greater in men than women (3.7 g vs. 3.1 g). Periosteal bone formation also increased vertebral body CSA 3-fold more in men than in women, distributing loads onto a larger CSA, so that the load imposed per unit CSA decreased twice as much in men than in women (13% vs. 5%). In men and women with spine fractures, CSA and vBMD were reduced relative to age-matched controls. However, vBMD was no different to the adjusted vBMD in age-matched controls derived assuming controls had no periosteal bone formation during aging. Thus, large amounts of bone are resorbed in men as well as in women, accounting for the age-related increase in spine fractures in both genders. Periosteal bone formation increases CSA and offsets bone loss in both genders but more greatly in men, accounting for the lower incidence of spine fractures in men than in women. We speculate that reduced periosteal bone formation, during growth or aging, may be in part responsible for both reduced vertebral size and reduced vBMD in men and women with spine fractures. Sexual dimorphism in vertebral fragility is more the result of gender differences in age-related bone gain than age-related bone loss.

Adult↗

The biomechanical basis of vertebral body fragility in men and women.

The aim of this study was to quantify the biomechanical basis for vertebral fracture risk in elderly men and women. A bone is likely to fracture when the loads imposed are similar to or greater than its strength. To quantify this risk, we developed a fracture risk index (FRI) based on the ratio of the vertebral body compressive load and strength. Loads were determined by upper body weight, height, and the muscle moment arm, and strength was estimated from cross-sectional area (CSA) and volumetric bone mineral density (vBMD). With loads less than the strength of the bone, the FRI remains < 1. For any given load, once bone strength diminishes due to a falling vBMD, the FRI will increase. Should FRI approach or exceed unity, structural failure of the vertebra is likely. We measured vertebral body CSA vBMD of the middle zone of third lumbar vertebra by lateral and posteroanterior (PA) scanning using dual-energy X-ray absorptiometry (DXA) and calculated vertebral compressive stress (load per unit area) in 327 healthy men and 686 healthy women and 26 men and 55 postmenopausal women with vertebral fractures. Activities that require forward bending of the upper body caused approximately 10-fold more compressive stress on the vertebra compared with standing upright. Men and women had similar peak vBMD in young adulthood. Because men have greater stature than women, the loads imposed on the vertebral body are higher (3,754 +/- 65 N vs. 3,051 +/- 31 N; p < 0.001). However, because CSA also was higher in men than women, peak load per unit CSA (stress) did not differ by gender (317.4 +/- 4.7 N/cm2 vs. 321.9 +/- 3.3 N/cm2, NS). The FRI was similar in young men and women and well below unity (0.42 +/- 0.02 vs. 0.43 +/- 0.01; NS). Gender differences emerged during aging; CSA increased in both men and women but more so in men, so load per unit area (stress) diminished but more so in men than in women. vBMD decreased in both genders but less so in men. These changes were captured in the FRI, which increased by only 21% in men and by 102% in women so that only 9% of elderly men but 26% of elderly women had an FRI > or = 1. Men and women with vertebral fractures had an FRI that was greater than or equal to unity (1.03 +/- 0.13 vs. 1.35 +/- 0.13; p < 0.05) and was 2.04 SD and 2.26 SD higher than age-matched men and women, respectively. In summary and conclusion, young men and women have a similar vBMD, vertebral stress, and FRI. During aging, CSA increases more, and vBMD decreases less in men than in women. Thus, fewer men than women are at risk for fracture because fewer men than women have these structural determinants of bone strength below a level at which the loads exceed the bone's ability to tolerate them. Men and women with vertebral fractures have FRIs that are equal to or exceed unity. The results show that a fracture threshold for vertebrae can be defined using established biomechanical principles; whether this approach has greater sensitivity and specificity than the current BMD T score of -2.5 SD is unknown.

Adult↗

Mechanical loading of diaphyseal bone in vivo: the strain threshold for an osteogenic response varies with location.

Bone tissue responds to elevated mechanical loading with increased bone formation, which is triggered either directly or indirectly by the mechanical strain engendered in the bone tissue. Previous studies have shown that mechanical strain magnitude must surpass a threshold before bone formation is initiated. The objective of this study was to estimate the strain thresholds at three different locations along the ulna of adult rats. We hypothesized that the strain threshold would be greater in regions of the ulna habitually subjected to larger mechanical strains. New bone formation was measured on the periosteal and endocortical surfaces of the ulnar diaphysis in adult female rats exposed to controlled dynamic loading. Axial, compressive loading was applied daily at five different magnitudes for a period of 2 weeks. Bone formation rate (BFR) was measured, using double-label histomorphometry at the ulnar middiaphysis and at locations 3 mm proximal and 3 mm distal to the middiaphysis. Loading induced lamellar bone formation on the periosteal surface that was greater at the distal ulnar location and lower at the proximal location when compared with the middiaphysis. Likewise, peak strains on the periosteal surface were greatest distally and less proximally. There was a significant dose-response relationship between peak strain magnitude and periosteal new bone formation when the mechanically induced strain surpassed a threshold. The strain threshold varied from 1343 microstrain (mu strain) proximally to 2284 mu strain at the midshaft to 3074 mu strain distally. Unlike the periosteal response to mechanical loading, there was not a clear dose-response relationship between applied load and bone formation on the endocortical surface. Endocortical strains were estimated to be < 20% of periosteal strains and may not have been sufficient to initiate a bone formation response. Our results show that the osteogenic response on the periosteal surface of the ulna depends on peak strain level once a strain threshold is surpassed. The threshold strain is largest distally, where locomotor bone strains are typically higher and smallest proximally where locomotor bone strains are lower.

Animals↗

Variation in bone biomechanical properties, microstructure, and density in BXH recombinant inbred mice.

To test the hypothesis that factors associated with bone strength (i.e., volumetric bone mineral density [vBMD], geometry, and microstructure) have heritable components, we exploited the 12 BXH recombinant inbred (RI) strains of mice derived from C57BL/6J (B6; low bone mass) and C3H/HeJ (C3H; high bone mass) progenitor strains. The femurs and lumbar vertebrae from each BXH RI strain were characterized for phenotypes of vBMD, microstructural, biomechanical, and geometrical properties. Methods included bending (femur) and compression (vertebra) testing, peripheral quantitative computed tomography (pQCT), and microcomputed tomography (microCT). Segregation patterns of femoral and vertebral biomechanical properties among the BXH RI strains suggested polygenic regulation. Femoral biomechanical properties were strongly associated with femoral width in the anteroposterior (AP) direction and cortical thickness--geometric properties with complex genetic regulation. Vertebral vBMD and biomechanical properties measured in BXH RI strains showed a greater variability than either B6 or C3H progenitors, suggesting both progenitor strains have independent subsets of genes that yield similar vBMD and strength. The microCT and pQCT data suggested that the distribution of vertebral mineral into cortical and trabecular compartments is regulated genetically. Although the B6 and C3H progenitors had similar vertebral strength, their vertebral structures were markedly different: B6 had good trabecular bone structure and modest cortical bone mineral content (BMC), whereas C3H had high cortical BMC combined with a deficiency in trabecular structure. These structural traits segregated independently in the BXH RI strains. Finally, vertebral strength was not correlated consistently with femoral strength among the BXH RI strains, suggesting genetic regulation of bone strength is site specific.

Animals↗