Search PubMed⌕ Search

Biomedical subjects

C E Schutt

Publications and source records attributed to C E Schutt.

At least 19 recordsLinked to original sources

Crystal structure of the oligomerization domain of NSP4 from rotavirus reveals a core metal-binding site.

During the maturation of rotaviral particles, non-structural protein 4 (NSP4) plays a critical role in the translocation of the immature capsid into the lumen of the endoplasmic reticulum. Full-length NSP4 and a 22 amino acid peptide (NSP4(114-135)) derived from this protein have been shown to induce diarrhea in young mice in an age-dependent manner, and may therefore be the agent responsible for rotavirally-induced symptoms. We have determined the crystal structure of the oligomerization domain of NSP4 which spans residues 95 to 137 (NSP4(95-137)). NSP4(95-137) self-associates into a parallel, tetrameric coiled-coil, with the hydrophobic core interrupted by three polar layers occupying a and d-heptad positions. Side-chains from two consecutive polar layers, consisting of four Gln123 and two of the four Glu120 residues, coordinate a divalent cation. Two independent structures built from MAD-phased data indicated the presence of a strontium and calcium ion bound at this site, respectively. This metal-binding site appears to play an important role in stabilizing the homo-tetramer, which has implications for the engagement of NSP4 as an enterotoxin.

Amino Acid Sequence↗

A comparative structural analysis of the ADF/cofilin family.

Actin-depolymerizing factor (ADF) and cofilin define a family of actin-binding proteins essential for the rapid turnover of filamentous actin in vivo. Here we present the 2.0 A crystal structure of Arabidopsis thaliana ADF1 (AtADF1), the first plant crystal structure from the ADF/cofilin (AC) family. Superposition of the four AC isoform structures permits an accurate sequence alignment that differs from previously reported data for the location of vertebrate-specific inserts and reveals a contiguous, vertebrate-specific surface opposite the putative actin-binding surface. Extending the structure-based sequence alignment to include 30 additional isoforms indicates three major groups: vertebrates, plants, and "other eukaryotes." Within these groups, several structurally conserved residues that are not conserved throughout the entire AC family have been identified. Residues that are highly conserved among all isoforms tend to cluster around the tryptophan at position 90 and a structurally conserved kink in alpha-helix 3. Analysis of surface character shows the presence of a hydrophobic patch and a highly conserved acidic cluster, both of which include several residues previously implicated in actin binding.

Actin Depolymerizing Factors↗

The new architectonics: an invitation to structural biology.

The philosophy of art might offer an epistemological basis for talking about the complexity of biological molecules in a meaningful way. The analysis of artistic compositions requires the resolution of intrinsic tensions between disparate sensory categories-color, line and form-not unlike those encountered in looking at the surfaces of protein molecules, where charge, polarity, hydrophobicity, and shape compete for our attentions. Complex living systems exhibit behaviors such as contraction waves moving along muscle fibers, or shivers passing through the growth cones of migrating neurons, that are easy to describe with common words, but difficult to explain in terms of the language of chemistry. The problem follows from a lack of everyday experience with processes that move towards equilibrium by switching between crystalline order and chain-like disorder, a commonplace occurrence in the submicroscopic world of proteins. Since most of what is understood about protein function comes from studies of isolated macromolecules in solution, a serious gap exists between what we know and what we would like to know about organized biological systems. Closing this gap can be achieved by recognizing that protein molecules reside in gradients of Gibbs free energy, where local forces and movements can be large compared with Brownian motion. Architectonics, a term borrowed from the philosophical literature, symbolizes the eventual union of the structure of theories-how our minds construct the world-with the theory of structures-or how stability is maintained in the chaotic world of microsystems.

History, 20th Century↗

Forthcoming topics

Explore the source record for details and available documents.

Journal Article↗

Covalent binding of ATPgammaS to the nucleotide-binding site in S14C-actin.

We have recently reported on the characterization of beta-actin carrying the mutation S14C in one of the phosphate-binding loops. The present paper describes the attachment of the adenosine 5'-[gamma-thio]-triphosphate (ATPgammaS) to actin containing this mutation. Treatment of S14C-actin with ATPgammaS blocked further nucleotide exchange and raised the thermal stability of the protein, suggesting the formation of a covalent bond between the sulfhydryl on the terminal phosphate of ATPgammaS and cysteine-14 of the mutant actin. The affinity of the derivatized G-actin for DNase I as compared to wild-type ATP-actin was lowered to a similar extent as that of ADP.AlF(4)-actin. The derivatized actin polymerized slower than ATP-actin but faster than ADP-actin. Under these conditions the bound ATPgammaS was hydrolyzed, suggesting the formation of a state corresponding to the transient ADP.P(i)-state. ATPgammaS-actin interacted normally with profilin, whereas the interaction with actin depolymerizing factor (ADF) was disturbed, as judged on the effects of these proteins on actin polymerization.

Actins↗

Thermal unfolding of G-actin monitored with the DNase I-inhibition assay stabilities of actin isoforms.

Actin is one of the proteins that rely on chaperonins for proper folding. This paper shows that the thermal unfolding of G-actin, as studied by CD and ultraviolet difference spectrometry, coincides with a loss in DNase I-inhibiting activity of the protein. Thus, the DNase I inhibition assay should be useful for systematic studies of actin unfolding and refolding. Using this assay, we have investigated how the thermal stability of actin is affected by either Ca2 + or Mg2 + at the high affinity divalent cation binding site, by the concentration of excess nucleotide, and by the nucleotide in different states of phosphorylation (ATP, ADP.Pi, ADP. Vi, ADP.AlF4, ADP.BeFx, and ADP). Actin isoforms from different species were also compared, and the effect of profilin on the thermal stability of actin was studied. We conclude that the thermal unfolding of G-actin is a three-state process, in which an equilibrium exists between native actin with bound nucleotide and an intermediate free of nucleotide. Actins in the Mg-form were less stable than the Ca-forms, and the stability of the different isoforms decreased in the following order: rabbit skeletal muscle alpha-actin = bovine cytoplasmic gamma-actin > yeast actin > cytoplasmic beta-actin. The activation energies for the thermal unfolding reactions were in the range 200-290 kJ.mol- 1, depending on the bound ligands. Generally, the stability of the actin depended on the degree with which the nucleotide contributed to the connectivity between the two domains of the protein.

Actins↗

Mutational analysis of arginine 177 in the nucleotide binding site of beta-actin.

Actin ADP-ribosylated at arginine 177 is unable to hydrolyze ATP, and the R177 side chain is in a position similar to that of the catalytically essential lysine 71 in heat shock cognate protein Hsc70, another member of the actin-fold family of proteins. Therefore, actin residue R177 has been implicated in the mechanism of ATP hydrolysis. This paper compares wild-type beta-actin with a mutant in which R177 has been replaced by aspartic acid. The mutant beta-actin was expressed in Saccharomyces cerevisiae and purified by DNase I-affinity chromatography. The mutant protein exhibited a reduced thermal stability and an increased nucleotide exchange rate, suggesting a weakened interdomain connection. The ATPase activity of G-actin and the ATPase activity expressed during polymerization were unaffected by the R177D replacement, showing that this residue is not involved in catalysis. In the presence of polymerizing salts, ATP hydrolysis by both wild-type Mg-beta-actin and the mutant protein preceded filament formation. With the mutant actin, the initial rate of ATP hydrolysis was as high as with wild-type actin, but polymer formation was slower, reached lower steady-state levels, and the polymers formed exhibited much lower viscosity. The critical concentration of polymerization (Acc) of the mutant actin was increased 10-fold as compared to wild-type actin. Filaments formed from the R177D mutant beta-actin bound phalloidin.

Actins↗

X-ray structure determination of human profilin II: A comparative structural analysis of human profilins.

Human profilins are multifunctional, single-domain proteins which directly link the actin microfilament system to a variety of signalling pathways via two spatially distinct binding sites. Profilin binds to monomeric actin in a 1:1 complex, catalyzes the exchange of the actin-bound nucleotide and regulates actin filament barbed end assembly. Like SH3 domains, profilin has a surface-exposed aromatic patch which binds to proline-rich peptides. Various multidomain proteins including members of the Ena/VASP and formin families localize profilin:actin complexes through profilin:poly-L-proline interactions to particular cytoskeletal locations (e.g. focal adhesions, cleavage furrows). Humans express a basic (I) and an acidic (II) isoform of profilin which exhibit different affinities for peptides and proteins rich in proline residues. Here, we report the crystallization and X-ray structure determination of human profilin II to 2.2 A. This structure reveals an aromatic extension of the previously defined poly-L-proline binding site for profilin I. In contrast to serine 29 of profilin I, tyrosine 29 in profilin II is capable of forming an additional stacking interaction and a hydrogen bond with poly-L-proline which may account for the increased affinity of the second isoform for proline-rich peptides. Differential isoform specificity for proline-rich proteins may be attributed to the differences in charged and hydrophobic residues in and proximal to the poly-L-proline binding site. The actin-binding face remains nearly identical with the exception of five amino acid differences. These observations are important for the understanding of the functional and structural differences between these two classes of profilin isoforms.

Acids↗

Mutational analysis of Ser14 and Asp157 in the nucleotide-binding site of beta-actin.

This paper compares wild-type and two mutant beta-actins, one in which Ser14 was replaced by a cysteine, and a second in which both Ser14 and Asp157 were exchanged (Ser14-->Cys and Ser14-->Cys, Asp157-->Ala, respectively). Both of these residues are part of invariant sequences in the loops, which bind the ATP phosphates, in the interdomain cleft of actin. The increased nucleotide exchange rate, and the decreased thermal stability and affinity for DNase I seen with the mutant actins indicated that the mutations disturbed the interdomain coupling. Despite this, the two mutant actins retained their ATPase activity. In fact, the mutated actins expressed a significant ATPase activity even in the presence of Ca2+ ions, conditions under which actin normally has a very low ATPase activity. In the presence of Mg2+ ions, the ATPase activity of actin was decreased slightly by the mutations. The mutant actins polymerized as the wild-type protein in the presence of Mg2+ ions, but slower than the wild-type in a K+/Ca2+ milieu. Profilin affected the lag phases and elongation rates during polymerization of the mutant and wild-type actins to the same extent, whereas at steady-state, the concentration of unpolymerized mutant actin appeared to be elevated. Decoration of mutant actin filaments with myosin subfragment 1 appeared to be normal, as did their movement in the low-load motility assay system. Our results show that Ser14 and Asp157 are key residues for interdomain communication, and that hydroxyl and carboxyl groups in positions 14 and 157, respectively, are not necessary for ATP hydrolysis in actin.

Actins↗

Domain motions in actin.

Previous crystallographic investigations have shown that actin can undergo large conformational changes, even when complexed to the same actin binding protein. We have conducted a formal analysis of domain motions in actin, using the four available crystal structures, to classify the mechanism as either hinge or shear and to quantify the magnitude of these changes. We demonstrate that actin consists of two rigid cores, a semi-rigid domain and three conformationally variable extended loops. Confirming predictions about the nature of the domain rotation in actin based on its structural similarity to hexokinase, we show, using an algorithm previously used only to identify protein hinges, that residues at the interface between the two rigid cores undergo a shear between alternative conformations of actin. Rotations of less than 7 degrees in the torsion angles of five residues in the polypeptides that connect the rigid cores enable one actin conformation to be transformed into another. Because these torsion angle changes are small, the interface between the domains is maintained. In addition, we show that actin secondary structure elements, including those outside the rigid cores, are conformationally invariant among the four crystal structures, even when actin is complexed to different actin binding proteins. Finally, we demonstrate that the current F-actin models are inconsistent with the principles of actin conformational change identified here.

Actins↗

The role of profilin in actin polymerization and nucleotide exchange.

Properties of human profilin I mutated in the major actin-binding site were studied and compared with wild-type profilin using beta/gamma-actin as interaction partner. The mutants ranged in affinity, from those that only weakly affected polymerization of actin to one that bound actin more strongly than wild-type profilin. With profilins, whose sequestering activity was low, the concentration of free actin monomers observed at steady-state of polymerization [Afree], was close to that seen with actin alone ([Acc], critical concentration of polymerization). Profilin mutants binding actin with an intermediate affinity like wild-type profilin caused a lowering of [Afree] as compared to [Acc], indicating that actin monomers and profilin:actin complexes participate in polymer formation. With a mutant profilin, which bound actin more strongly than the wild-type protein, an efficient sequestration of actin was observed, and in this case, the [Afree] at steady state was again close to [Acc], suggesting that the mutant profilin:actin had a greatly lowered ability to incorporate actin subunits at the (+)-end. The results from the kinetic and steady-state experiments presented are consonant with the idea that profilin:actin complexes are directly incorporated at the (+)-end of actively polymerizing actin filaments, while they do not support the view that profilin facilitates polymer formation.

Actins↗

Muscle contraction as a Markov process. I: Energetics of the process.

Force generation during muscle contraction can be understood in terms of cyclical length changes in segments of actin thin filaments moving through the three-dimensional lattice of myosin thick filaments. Recent anomalies discovered in connection with analysis of myosin step sizes in in vitro motility assays and with skinned fibres can be rationalized by assuming that ATP hydrolysis on actin accompanies these length changes. The paradoxically rapid regeneration of tension in quick release experiments, as well as classical energetic relationships, such as Hill's force-velocity curve, the Fenn effect, and the unexplained enthalpy of shortening, can be given mutually self-consistent explanations with this model. When muscle is viewed as a Markov process, the vectorial process of chemomechanical transduction can be understood in terms of lattice dependent transitions, wherein the phosphate release steps of the myosin and actin ATPases depend only on occurrence of allosteric changes in neighbouring molecules. Tropomyosin has a central role in coordinating the steady progression of these cooperative transitions along actin filaments and in gearing up the system in response to higher imposed loads.

Actins↗

The crystal structure of a major allergen from plants.

BACKGROUND: Profilins are small eukaryotic proteins involved in modulating the assembly of actin microfilaments in the cytoplasm. They are able to bind both phosphatidylinositol-4,5-bisphosphate and poly-L-proline (PLP) and thus play a critical role in signaling pathways. Plant profilins are of interest because immunological cross-reactivity between pollen and human profilin may be the cause of hay fever and broad allergies to pollens. RESULTS: The determination of the Arabidopsis thaliana profilin isoform I structure, using multiwavelength anomalous diffraction (MAD) to obtain structure-factor phases, is reported here. The structure of Arabidopsis profilin is similar to that of previously determined profilin structures. Conserved amino acid residues in profilins from plants, mammals, and lower eukaryotes are critically important in dictating the geometry of the PLP-binding site and the overall polypeptide fold. The main feature distinguishing plant profilins from other profilins is a solvent-filled pocket located in the most variable region of the fold. CONCLUSIONS: Comparison of the structures of SH3 domains with those of profilins from three distinct sources suggests that the mode of PLP binding may be similar. A comparison of three profilin structures from different families reveals only partial conservation of the actin-binding surface. The proximity of the semi-conserved actin-binding site and the binding pocket characteristic of plant profilins suggests that epitopes encompassing both features are responsible for the cross-reactivity of antibodies between human and plant profilins thought to be responsible for type I allergies.

Actins↗

The structure of an open state of beta-actin at 2.65 A resolution.

The structure of an "open state" of crystalline profilin:beta-actin has been solved to 2.65 A by X-ray crystallography. The open-state crystals, in 1.8 M potassium phosphate, have an expanded unit cell dimension in the c direction of 185.7 A compared with 171.9 A in the previously solved ammonium sulphate-stabilized "tight-state" structure. The unit cell change between the open and the tight states is accompanied by large subdomain movements in actin. Furthermore, the nucleotide in the open state is significantly more exposed to solvent, and local conformational changes in the hydrophobic pocket surrounding cysteine 374 occur during the transition to the tight state. Significant changes were observed at the N terminus and in the DNase-I binding loop. Neither the structure of profilin nor its contact with beta-actin are affected by the changes in the unit cell. Applying osmotic pressure to profilin:beta-actin crystals brings about a collapse of the unit cell comparable with that seen in the open to tight-state transition, enabling an estimate of the work required to cause this transformation of beta-actin in the crystals. The slight difference in energy between the open and collapsed states explains the extreme sensitivity of profilin:beta-actin crystals to changes in chemical and thermal environment.

Actins↗

The effect on actin ATPase of phalloidin and tetramethylrhodamine phalloidin.

Actin polymerization has been studied in the absence of excess nucleotide. Using G-actin ATP monomers, it was shown that mechanical shearing stimulates ATP hydrolysis. The procedures used enabled the detection of differential effects of phalloidin and tetramethylrhodamine-phalloidin, on the P(i)-release step of the actin ATPase. It is concluded that tetramethylrhodamine, in contrast to phalloidin, accelerates P(i)-release from actin filaments.

Actins↗

Structural studies on the ribbon-to-helix transition in profilin: actin crystals.

Knowledge of the structure of actin in its various conformational states is important for understanding the diverse motile activities carried out by eukaryotic cells. Profilin:actin crystals provide a unique system for studying conformational states of actin, because they exhibit a high degree of polymorphism in response to environmental conditions while maintaining crystalline order. A preliminary comparison of two states of profilin:beta-actin crystals shows that crystal polymorphism involves movements of actin subdomains at hinge points homologous to those found in hexokinase, a protein whose polypeptide fold is related to actin. The homology of the hinge points in actin to those in hexokinase suggests that actin subdomain movements in profilin:beta-actin crystals have functional significance. We discuss how these movements could be related to structural transitions between states of filamentous actin in muscle contraction.

Actins↗

Crystallization and structure determination of bovine profilin at 2.0 A resolution.

Profilin regulates the behavior of the eukaryotic microfilament system through its interaction with non-filamentous actin. It also binds several ligands, including poly(L-proline) and the membrane phospholipid phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2). Bovine profilin crystals (space group C2; a = 69.15 A, b = 34.59 A, c = 52.49 A; alpha = gamma = 90 degrees, beta = 92.56 degrees) were grown from a mixture of poly(ethylene glycol) 400 and ammonium sulfate. X-ray diffraction data were collected on an imaging plate scanner at the DORIS storage ring (DESY, Hamburg), and were phased by molecular replacement, using a search model derived from the 2.55 A structure of profilin complexed to beta-actin. The refined model of bovine profilin has a crystallographic R-factor of 16.5% in the resolution range 6.0 to 2.0 A and includes 128 water molecules, several of which form hydrogen bonds to stabilize unconventional turns. The structure of free bovine profilin is similar to that of bovine profilin complexed to beta-actin, and C alpha atoms from the two structures superimpose with an r.m.s. deviation of 1.25 A. This value is reduced to 0.51 A by omitting Ala1 and the N-terminal acetyl group, which lie at a profilin-actin interface in crystals of the complex. These residues display a strained conformation in crystalline profilin-actin but may allow the formation of a hydrogen bond between the N-acetyl carbonyl group of profilin and the phenol hydroxyl group of Tyr188 in actin. Several other actin-binding residues of profilin show different side-chain rotomer conformations in the two structures. The polypeptide fold of bovine profilin is generally similar to those observed by NMR for profilin from other sources, although the N terminus of Acanthamoeba profilin isoform I lies in a distorted helix and the C-terminal helix is less tilted with respect to the strands in the central beta-pleated sheet than is observed in bovine profilin. The majority of the aromatic residues in profilin are exposed to solvent and lie in either of two hydrophobic patches, neither of which takes part in an interface with actin. One of these patches is required for binding poly(L-proline) and contains an aromatic cluster comprising the highly conserved residues Trp3, Tyr6, Trp31 and Tyr139. In forming this cluster, Trp31 adopts a sterically strained rotamer conformation.(ABSTRACT TRUNCATED AT 400 WORDS)

Actins↗