Search PubMed⌕ Search

Biomedical subjects

C Chui

Publications and source records attributed to C Chui.

At least 19 recordsLinked to original sources

Transversely isotropic properties of porcine liver tissue: experiments and constitutive modelling.

Knowledge of the biomechanical properties of soft tissue, such as liver, is important in modelling computer aided surgical procedures. Liver tissue does not bear mechanical loads, and, in numerical simulation research, is typically assumed to be isotropic. Nevertheless, a typical biological soft tissue is anisotropic. In vitro uniaxial tension and compression experiments were conducted on porcine cylindrical and cubical liver tissue samples respectively assuming a simplistic architecture of liver tissue with its constituent lobule and connective tissues components. With the primary axis perpendicular to the cross sectional surface of samples, the tissue is stiffer with tensile or compressive force in the axial direction compared to that of the transverse direction. At 20% strain, about twice as much force is required to elongate a longitudinal tissue sample than that of a transverse sample. Results of the study suggest that liver tissue is transversely isotropic. A combined strain energy based constitutive equation for transversely isotropic material is proposed. The improved capability of this equation to model the experimental data compared to its previously disclosed isotropic version suggests that the assumption on the fourth invariant in the constitutive equation is probably correct and that anisotropy properties of liver tissue should be considered in surgical simulation.

Animals↗

Combined compression and elongation experiments and non-linear modelling of liver tissue for surgical simulation.

Uniaxial stress-strain data were obtained from in vitro experiments on 20 porcine livers for compressions, elongations and cycles of compression and then elongation. There were about 70 cylindrical samples, with diameter 7mm and varying height (4-11 mm). The combined compression and elongation test provide a unified framework for both compression and elongation for applications such as computer-aided surgical simulation. It enable the zero stress state of the experimental liver sample to be precisely determined. A new equation that combined both logarithmic and polynomial strain energy forms was proposed in modelling these experimental data. The assumption of incompressibility was justified from a preliminary Poisson's ratio for elongation and compression at 0.43+/-0.16 and 0.47+/-0.15, respectively. This equation provided a good fit for the observed mechanical properties of liver during compression-elongation cycles and for separate compressions or elongations. The root mean square errors were 91.92+/-17.43 Pa, 57.55+/-13.23 Pa and 29.78+/-17.67 Pa, respectively. In comparison with existing strain energy functions, this combined model was the better constitutive equation. Application of this theoretical model to small liver samples and other tissues demonstrated its suitability as the material model of choice for soft tissue.

Animals↗

A stereotactic method for the three-dimensional registration of multi-modality biologic images in animals: NMR, PET, histology, and autoradiography.

The objective of this work was to develop and then validate a stereotactic fiduciary marker system for tumor xenografts in rodents which could be used to co-register magnetic resonance imaging (MRI), PET, tissue histology, autoradiography, and measurements from physiologic probes. A Teflon fiduciary template has been designed which allows the precise insertion of small hollow Teflon rods (0.71 mm diameter) into a tumor. These rods can be visualized by MRI and PET as well as by histology and autoradiography on tissue sections. The methodology has been applied and tested on a rigid phantom, on tissue phantom material, and finally on tumor bearing mice. Image registration has been performed between the MRI and PET images for the rigid Teflon phantom and among MRI, digitized microscopy images of tissue histology, and autoradiograms for both tissue phantom and tumor-bearing mice. A registration accuracy, expressed as the average Euclidean distance between the centers of three fiduciary markers among the registered image sets, of 0.2 +/- 0.06 mm was achieved between MRI and microPET image sets of a rigid Teflon phantom. The fiduciary template allows digitized tissue sections to be co-registered with three-dimensional MRI images with an average accuracy of 0.21 and 0.25 mm for the tissue phantoms and tumor xenografts, respectively. Between histology and autoradiograms, it was 0.19 and 0.21 mm for tissue phantoms and tumor xenografts, respectively. The fiduciary marker system provides a coordinate system with which to correlate information from multiple image types, on a voxel-by-voxel basis, with sub-millimeter accuracy--even among imaging modalities with widely disparate spatial resolution and in the absence of identifiable anatomic landmarks.

Algorithms↗

Wiring a medical school and teaching hospital for telemedicine.

The planning and installation of a telemedicine system for communication within a teaching hospital and its academic and hospital units with a capacity for accommodation of up to 400 video-stations is described. The system is intended for improving the communication between patients and health professionals, and between the health professionals themselves. It also provides the basis for improving pre-graduate teaching, especially problem-based learning, and all aspects of postgraduate teaching.

Computers↗

BFIT, a unique acyl-CoA thioesterase induced in thermogenic brown adipose tissue: cloning, organization of the human gene and assessment of a potential link to obesity.

We hypothesized that certain proteins encoded by temperature-responsive genes in brown adipose tissue (BAT) contribute to the remarkable metabolic shifts observed in this tissue, thus prompting a differential mRNA expression analysis to identify candidates involved in this process in mouse BAT. An mRNA species corresponding to a novel partial-length gene was found to be induced 2-3-fold above the control following cold exposure (4 degrees C), and repressed approximately 70% by warm acclimation (33 degrees C, 3 weeks) compared with controls (22 degrees C). The gene displayed robust BAT expression (i.e. approximately 7-100-fold higher than other tissues in controls). The full-length murine gene encodes a 594 amino acid ( approximately 67 kDa) open reading frame with significant homology to the human hypothetical acyl-CoA thioesterase KIAA0707. Based on cold-inducibility of the gene and the presence of two acyl-CoA thioesterase domains, we termed the protein brown-fat-inducible thioesterase (BFIT). Subsequent analyses and cloning efforts revealed the presence of a novel splice variant in humans (termed hBFIT2), encoding the orthologue to the murine BAT gene. BFIT was mapped to syntenic regions of chromosomes 1 (human) and 4 (mouse) associated with body fatness and diet-induced obesity, potentially linking a deficit of BFIT activity with exacerbation of these traits. Consistent with this notion, BFIT mRNA was significantly higher ( approximately 1.6-2-fold) in the BAT of obesity-resistant compared with obesity-prone mice fed a high-fat diet, and was 2.5-fold higher in controls compared with ob/ob mice. Its strong, cold-inducible BAT expression in mice suggests that BFIT supports the transition of this tissue towards increased metabolic activity, probably through alteration of intracellular fatty acyl-CoA concentration.

Adipose Tissue↗

Wiring a medical school and teaching hospital for telemedicine.

The planning and installation of a telemedicine system for communication within a teaching hospital and its academic and hospital units with a capacity for accommodation of up to 400 video-stations is described. The system is intended for improving the communication between patients and health professionals, and between the health professionals themselves. It also provides the basis for improving pre-graduate teaching, especially problem-based learning, and all aspects of postgraduate teaching.

Computers↗

Treatment planning for prostate implants using magnetic-resonance spectroscopy imaging.

PURPOSE: Recent studies have demonstrated that magnetic-resonance spectroscopic imaging (MRSI) of the prostate may effectively distinguish between regions of cancer and normal prostatic epithelium. This diagnostic imaging tool takes advantage of the increased choline plus creatine versus citrate ratio found in malignant compared to normal prostate tissue. The purpose of this study is to describe a novel brachytherapy treatment-planning optimization module using an integer programming technique that will utilize biologic-based optimization. A method is described that registers MRSI to intraoperative-obtained ultrasound images and incorporates this information into a treatment-planning system to achieve dose escalation to intraprostatic tumor deposits. METHODS: MRSI was obtained for a patient with Gleason 7 clinically localized prostate cancer. The ratios of choline plus creatine to citrate for the prostate were analyzed, and regions of high risk for malignant cells were identified. The ratios representing peaks on the MR spectrum were calculated on a spatial grid covering the prostate tissue. A procedure for mapping points of interest from the MRSI to the ultrasound images is described. An integer-programming technique is described as an optimization module to determine optimal seed distribution for permanent interstitial implantation. MRSI data are incorporated into the treatment-planning system to test the feasibility of dose escalation to positive voxels with relative sparing of surrounding normal tissues. The resultant tumor control probability (TCP) is estimated and compared to TCP for standard brachytherapy-planned implantation. RESULTS: The proposed brachytherapy treatment-planning system is able to achieve a minimum dose of 120% of the 144 Gy prescription to the MRS positive voxels using (125)I seeds. The preset dose bounds of 100-150% to the prostate and 100-120% to the urethra were maintained. When compared to a standard plan without MRS-guided optimization, the estimated TCP for the MRS-optimized plan is superior. The enhanced TCP was more pronounced for smaller volumes of intraprostatic tumor deposits compared to estimated TCP values for larger lesions. CONCLUSIONS: Using this brachytherapy-optimization system, we could demonstrate the feasibility of MRS-optimized dose distributions for (125)I permanent prostate implants. Based on probability estimates of anticipated improved TCP, this approach may have an impact on the ability to safely escalate dose and potentially improve outcome for patients with organ-confined but aggressive prostatic cancers. The magnitude of the TCP enhancement, and therefore the risks of ignoring the MR data, appear to be more substantial when the tumor is well localized; however, the gain achievable in TCP may depend quite considerably on the MRS tumor-detection efficiency.

Algorithms↗

Intensity-modulated tangential beam irradiation of the intact breast.

PURPOSE: To evaluate the potential benefits of intensity modulated tangential beams in the irradiation of the intact breast. METHODS AND MATERIALS: Three-dimensional treatment planning was performed on five left and five right breasts using standard wedged and intensity modulated (IM) tangential beams. Optimal beam parameters were chosen using beams-eye-view display. For the standard plans, the optimal wedge angles were chosen based on dose distributions in the central plane calculated without inhomogeneity corrections, according to our standard protocol. Intensity-modulated plans were generated using an inverse planning algorithm and a standard set of target and critical structure optimization criteria. Plans were compared using multiple dose distributions and dose volume histograms for the planning target volume (PTV), ipsilateral lung, coronary arteries, and contralateral breast. RESULTS: Significant improvements in the doses to critical structures were achieved using intensity modulation. Compared with a standard-wedged plan prescribed to 46 Gy, the dose from the IM plan encompassing 20% of the coronary artery region decreased by 25% (from 36 to 27 Gy) for patients treated to the left breast; the mean dose to the contralateral breast decreased by 42% (from 1.2 to 0.7 Gy); the ipsilateral lung volume receiving more than 46 Gy decreased by 30% (from 10% to 7%); the volume of surrounding soft tissue receiving more than 46 Gy decreased by 31% (from 48% to 33%). Dose homogeneity within the target volume improved greatest in the superior and inferior regions of the breast (approximately 8%), although some decrease in the medial and lateral high-dose regions (approximately 4%) was also observed. CONCLUSION: Intensity modulation with a standard tangential beam arrangement significantly reduces the dose to the coronary arteries, ipsilateral lung, contralateral breast, and surrounding soft tissues. Improvements in dose homogeneity throughout the target volume can also be achieved, particularly in the superior and inferior regions of the breast. It remains to be seen whether the dosimetric improvements achievable with IMRT will lead to significant clinical outcome improvements.

Breast↗

Real-time interactive simulator for percutaneous coronary revascularization procedures.

This article describes the simulation of real-time catheter navigation in our interactive interventional cardiology simulation system (ICard). ICard is designed to enable medical students or physicians to familiarize themselves with the techniques of interventional catheterization procedures. The ICard software provides three-dimensional (3-D) views of the blood vessels and fluoroscopic images for real-time visualization of the catheter position. The 3-D human vasculature is built from various image data sets and is represented with a central line hierarchy model. Navigation of the catheter and guide wire and their interaction with blood vessels are implemented by applying the finite element method. Physical modeling that features the elasticity of the catheter and guide wire was developed to provide a realistic simulation of catheterization procedures. An electromechanical device was also developed in the system, allowing physical manipulation of catheter and guide wire movements. ICard can be used for training and design of equipment for interventional cardiology and may be further extended for pretreatment planning.

Computer Simulation↗

Three-dimensional treatment planning for para-aortic node irradiation in patients with cervical cancer.

Three-dimensional treatment planning has been used by four cooperating centers to prepare and analyze multiple treatment plans on two cervix cancer patients. One patient had biopsy-proven and CT-demonstrable metastasis to the para-aortic nodes, while the other was at high risk for metastatic involvement of para-aortic nodes. Volume dose distributions were analyzed, and an attempt was made to define the role of 3-D treatment planning to the para-aortic region, where moderate to high doses (50-66 Gy) are required to sterilize microscopic and gross metastasis. Plans were prepared using the 3-D capabilities for tailoring fields to the target volumes, but using standard field arrangements (3-D standard), and with full utilization of the 3-D capabilities (3-D unconstrained). In some but not all 3-D unconstrained plans, higher doses were delivered to the large nodal volume and to the volume containing gross nodal disease than in plans analyzed but not prepared with full 3-D capability (3-D standard). The small bowel was the major dose limiting organ. Its tolerance would have been exceeded in all plans which prescribed 66 Gy to the gross nodal mass, although some reduction in small bowel near-maximum dose was achieved in the 3-D unconstrained plans. All plans were able to limit doses to other normal organs to tolerance levels or less, with significant reductions seen in doses to spinal cord, kidneys, and large bowel in the 3-D unconstrained plans, as compared to the 3-D standard plans. A high probability of small bowel injury was detected in one of four 3-D standard plans prescribed to receive 50 Gy to the large para-aortic nodal volume; the small bowel dose was reduced to an acceptable level in the corresponding 3-D unconstrained plan. An optimum beam energy for treating this site was not identified, with plans using 4, 6, 10, 15, 18, and 25 MV photons all being equally acceptable. Attempts to deliver moderate or high doses (50-66 Gy) to this region should be made only after careful analysis of the plan with techniques similar to those employed in this study.

Aged↗

Treatment planning for internal radionuclide therapy: three-dimensional dosimetry for nonuniformly distributed radionuclides.

A calculational approach is described that provides the spatially varying radiation absorbed dose, presented as isodose contours superimposed on CT images, from nonuniform and/or irregular cumulated activity distributions. CT images are read from magnetic tape and are displayed on a high-resolution color graphics display monitor. Source tissue geometries are defined on a series of contiguous CT images automatically (by an edge detection algorithm) or manually (using a trackball), thereby obtaining a three-dimensional representation of the various source volumes of activity. Dose calculations are performed using a radionuclide-specific absorbed dose point kernel in the form of a lookup table. The method described yields the spatially varying dose delivered to tumor and normal tissue volumes from a patient-specific cumulated activity distribution in a clinically implementable manner. This level of accuracy in determining normal tissue and tumor doses may prove valuable in the evaluation and implementation of radionuclides and radiolabeled compounds for therapeutic purposes.

Algorithms↗

Thalamic hemorrhage: a computed tomographic-clinical study in prognostic prediction.

A series of 50 patients with thalamic hemorrhage confirmed by CT Scan is reported. The size, location, extension, and ventricular perforation of the hemorrhage are accurately portrayed. The age of onset, sex, level of consciousness on admission, history of vomiting and headache and detailed neurological examination were studied and analyzed. All patients were evaluated 6 months after the attack using the Kanaya's grading of ability in daily life (ADL). The authors conclude that the size of hematoma, initial consciousness loss, impaired level of consciousness on admission and bilateral Babinski's sign indicates the poor prognosis in thalamic hemorrhage.

Activities of Daily Living↗

The mechanism of cyanide intoxication and its antagonism.

The mechanism of cyanide intoxication has been attributed to the inhibition of cytochrome oxidase, thereby decreasing the tissue utilization of oxygen. One mechanism of cyanide antagonism is by sequestering cyanide with methaemoglobin to form cyanmethaemoglobin and another mechanism is detoxifying with a sulphur donor to thiocyanate. Questions have been raised with regard to these classical mechanisms. Oxygen with nitrite-thiosulphate antagonizes the lethal effects of cyanide. Theoretically, increased oxygen should serve no useful purpose, as it is the tissue utilization of oxygen which is inhibited. In the nitrite-thiosulphate antidotal combination, the proposal is made that the predominate antidotal action of nitrite is a vasogenic action, rather than methaemoglobin formation, because when methaemoglobin formation is inhibited by methylene blue the protective action of sodium nitrite persists. This suggests that methaemoglobin formation plays only a small part, if any, in the therapeutic antagonism of the lethal effects of cyanide. The roles and implications of sodium thiosulphate and non-rhodanese substrates in the detoxification mechanism are compared. Lastly, a new approach to cyanide antagonism has been initiated which involves the erythrocyte encapsulation of thiosulphate and sulphurtransferase as an antidote and prophylaxis against cyanide.

Animals↗

Computation of radiation dose distributions for shielded cervical applicators.

While cervical applicators with shielded ovoids are used widely in brachytherapy, we know of no system for calculating dose distributions for them. For shielded sources, because of a lack of symmetry and because of a rapid variation of dose as a function of position relative to the source, extensive measured data in three dimensions are required. In the method we have developed, the dose at a given point from a source in a shielded ovoid is calculated by multiplying the dose from an unshielded source by the "effective attenuation factor" of the shields. The latter quantity is obtained by linear-interpolation in a three-dimensional table generated from measurements described in an earlier paper. The unshielded-source dose is calculated as the product of source strength, time of implant, distance-dependent geometry factor and a tabulated quantity called the "relative dose rate factor". Relative dose rate factor is obtained by dividing measured dose rate by the product of geometry factor and source strength. Division by the geometry factor reduces the amount of data required with respect to accuracy in linear-interpolation. Input localization data must include not only the position of the end points defining the source but also a third reference point to define the orientation of the shields.

Brachytherapy↗

Use of computerized tomography in dose calculations for radiation treatment planning.

The detailed anatomic information provided by CT scanners can be used to improve the accuracy of dose distribution calculations for radiation treatment planning. Commonly used methods for dose computations are described, with emphasis on their use with CT data, and measured data are presented to illustrate their relative merits. Modification of CT numbers to account for the difference in energies of diagnostic and therapeutic radiation is discussed. A description of a typical CT-based radiation treatment planning system is presented.

Humans↗